Forklift

LINDE E 48 P

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 7,896 h, load capacity: 4,800 kg, lifting height: 4,670 mm, free lift: 1,620 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, battery capacity: 805 Ah, battery voltage: 80 V, fork length: 1,600 mm, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 250-15, rear tire type: superelastic tires (black), rear tire size: 21x8-9, overall weight: 7,090 kg, total height: 2,400 mm, total length: 2,930 mm, total width: 1,500 mm, fuel: electricity, Equipment: cabin, sideshift, LINDE E 48 P – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 4.800 kg Lifting height: 4.670 mm Closed height: 2.400 mm Free lift: 1.620 mm Mast: Triplex (3F467) Fork length: 1.600 mm Fork carriage: 3 Drive: Elektro 80V Battery: 80 V / 805 ah. Charger: Dreiphasig 80 V Tyres: Superelastik SE 250-15 (70%) / 21x8-9 (50%) Service weight: 7.090 kg Length: 2.930 mm Width: 1.500 mm Year of manufacture: 2007 Operating hours: 7.896 h Condition: ready to drive EQUIPMENT Iiodpfx Aoz Ap Dhshnsg 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin, Pulse control ATTACHMENTS Sideshift, Fork positioner Internal no.: 1309297 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: excellent (used), Year of construction: 2014, functionality: unexamined, workpiece weight (max.): 2,500 kg, total width: 3,200 mm, total length: 15,800 mm, distance between centers: 6,000 mm, workpiece diameter between centers: 850 mm, overall weight: 19,000 kg, We offer this very good Hol-Monta spol.sro UB 85 / 6000 CNC cylindrical grinding machine, year of construction 2014. Model: UB 85 / 6000 CNC Control type: Kavalir K 51-2 Serial number: H 214 09 005 Swing dia. 850 mm Center distance 6 000 mm Internal Grinding attachment Iodsy Hgrgopfx Ahneig Steadyrests etc.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06007153/001, total height: 6,050 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 210 kg, construction height: 6,050 mm, input voltage: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial Number: 06007153/001 Year of manufacture: 2006 Total load capacity: 2 x 33,550 kg Load per tray: Medium: 205 kg (evenly distributed) Tray dimensions: 3050 x 864 mm Number of trays: 36 units (more or heavier trays available upon request) Shuttle dimensions (W x D x H): 3380 x 3074 x 6050 mm (Height adjustable to available space) Power supply: 3/N/PE400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid as long as the system is unsold Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed; more or heavier trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Storage capacity with 36 trays: approx. 95 m², each tray approx. 2.64 m² - Electronic volume measuring system with 25 mm grid on the display - Access opening with sliding doors for protection of personnel and stored goods Iijdpjxq Tbtofx Ahneg - C2000 Control System, with B/W OP2000 display - LED anti-glare lighting above access point - Toothed-belt drive for minimal noise - Toothed-belt drive for fastest order picking - Shelf spacing adjustable in 25 mm increments by configuring support profiles, ideal for high-density storage - Weight management system monitors the load per tray - Includes light pointer Price: On request only by e-mail Price: excluding VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from brands such as Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Condition: ready for operation (used), functionality: limited functionality, disc diameter: 525 mm, Weight approx. 1,900 kg Dimensions (L x W x H) approx. 1,800 x 1,500 x 2,200 mm Working disc diameter 525 mm Largest disc ring width 175 mm Iisdpfx Aoh Invrshnsg Largest workpiece dimension 170 mm Working disc speed 45/70/90/140 rpm Working power, main drive 4.0 kW Connection 400V/50Hz Emergency stop switch Conventional control with operating panel Full-fledged lapping machine, conventional control

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. Iijdpfx Aetmqi Dshnjg The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: used, Used Crusher for Filter Cake / Lump Breaker Drive: Lenze Isdpebpia Djfx Ahneig The crusher for filter cake or lump breaker consists of two horizontal rotating shafts.

Condition: used, Electric forklift LINDE, model E25L-01 Serial number: H2X387D01930, Year of manufacture: 2013 Load capacity: 2500 kg Lifting height: 4700 mm Fork length: 1600 mm Fork carrier width: 1150 mm Overall height: 2200 mm Operating voltage: 80 volts - Triplex full-vision mast with 1500 mm free lift - 2x auxiliary hydraulics on the fork carrier for attachments - Battery pack HOPPECKE, type 5HPZS 575, 80 volts, 575 Ah (New battery from 2019) - Automatic charger INDATRON, type D80 volts / 80 amps (New) - 4-wheel superelastic, solid rubber tires, front 225/75-10, rear 200/50-10 - Operator's protective cabin with heater - Hydraulic power steering - 2 LED work lights in front - 1 LED work light in rear Iisdpfxsd Rmx Ns Ahneg - 1 LED Blue Spot light in rear - According to the operating hour meter, 15,995 operating hours - New TÜV/UVV inspection Length without forks: 2500 mm Overall width: 1150 mm Own weight: approx. 4700 kg Good condition

Year of construction: 2003, condition: used, Complete and fully functional sputtering system. Sold on behalf of a customer! Iodpfxjcw Idts Ahnsig Please contact us if you have any questions.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 731 h, pressing force: 51 t, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, number of axes: 7, This 7-axis TRUMPF TruBend 7050 (B28) was manufactured in 2022. It features a press force of 500 kN and a bending length of 1,530 mm. The machine includes a dynamic electromechanical drive and a CNC-controlled crowning system for precise bending operations. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 7050 (B28) press brake we have for sale. Contact us for further details. • Drive: Dynamic electromechanical Torque Drive • Capacity and dimensions: • Free upright clearance: 1,305 mm • Usable installation height: 385 mm • Throat depth: 250 mm • Working height: 1,150 mm • Machine frame: Stable welded frame • Axes and backgauge: • CNC axes: 7 (Y, X1, X2, R1, R2, Z1, Z2) • Backgauge: 6-axis independent system (X1/X2/R1/R2/Z1/Z2), both units move independently • Backgauge features: Carbon-fiber fingers, hardened reference surfaces, helical rack Z-drive, flexible positioning • Travels / working range: • Y stroke: 215 mm • X travel: 240 mm (max backgauge range 500 mm) • R travel: 153 mm • Speeds: • Y rapid/return: 220 mm/s • Y working: 25 mm/s • X: 1,500 mm/s • R: 750 mm/s • Z: 2,200 mm/s • Positioning accuracy: • Y: 0.002 mm • X: 0.02 mm • Z: 0.02 mm • Crowning: • CNC-controlled crowning, automatic compensation via drive • Crowning drive integrated in the table • Suited for multi-station bending • Y-axis / press beam: • Inductive Y measuring system • Dynamic spring-back compensation with automatic force-based correction • Hardened adjustable guide strips • Control system: • TRUMPF Touchpoint TruBend, 21.5" TFT Full HD (1920×1080) • Intel Core i5 2.7 GHz dual-core, Windows Embedded Standard 7 • Realistic 3D visualization, TRUMPF technology database • User management with Standard/Expert/Administrator levels • 10 user access cards included • Data interfaces: • USB, RJ45, Ethernet 10/100 Mbit/s • Central Link, OPC UA • Internet teleservice / remote diagnostics • Tool clamping and setup: • Automatic TRUMPF upper and lower tool clamping (self-centering, hardened) • Fast segment change • LED Tool Indicator integrated in upper clamping (shows setup positions/next bend station) • Safety: • Automatic BendGuard (part of Productivity Package Plus) • Optoelectronic safety system with automatic tool-height setting • Allows max permissible Y speed with foot pedal • Automatic adjustment, movable out of working area for side processing • Electronically monitored side safety doors • Electrically operated lift-up rear doors Iiedpszu S Uaofx Ahnjg • Emergency stop • Transport securing devices • CE marking • Ergonomic package: • Front support table • Front and rear LED work-area lighting • Support for seated/standing operation • Document shelf • Drawer for measuring instruments Additional equipment • Measuring equipment: • Digital angle gauge • Digital caliper • 90-degree edge square • 1x TecZone Bend license • Wireless 2D code reader with Bluetooth connection Technical Specification Bending Length 1530 mm

Condition: used, Year of construction: 2013, Colour: Grey Price: On request - Year: 2013 - Documentation available: No - CE certificate present: No - Main motor power [kW]: 30 - Rotor width [mm]: 2500 - Number of shafts [pcs.]: 1 - Opening width [mm]: 3000 - Opening length [mm]: 1400 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Iijdpowz Nxxsfx Ahnog Yorick Diebels