Diesel Forklift

Linde H80D-01/900

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 11,989 h, load capacity: 8,000 kg, lifting height: 3,750 mm, load center: 900 mm, fuel type: diesel, mast type: duplex, power: 87 kW (118.29 HP), total height: 3,180 mm, Equipment: air conditioning, cabin, hydraulically sliding cabin, lighting, pallet forks, sideshift, trailer coupling, Diesel forklift LINDE H80D-01/900 Year of manufacture: 2011 According to the hour meter: 11,989 hours 8 tons lifting capacity at 900mm load center 3.37 meters lifting height 3.18 meters mast height 3.37 meters overhead guard height 2.20 meters fork carriage width 2.60 meters fork length 87 kW Deutz 6-cylinder engine - FULLY EQUIPPED!! - Fork adjustment - Side shifter Dedpfxszrnf Ne Ai Secn - Dual tires - Elevated special cabin - Cabin with hydraulic tilt - Reversing device - Rearview camera - Air conditioning - Radio - and much more... Immediately ready for use! Original paint! Selling price: 19,900,-- net Delivery also possible!

Condition: used, functionality: fully functional, machine/vehicle number: 014017, Year of construction: 2021, operating hours: 758 h, load capacity: 8,000 kg, lifting height: 4,400 mm, free lift: 1,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,850 mm, fork length: 2,400 mm, drive type: Diesel, Diesel forklift Chassis number: 014017 Dcsdpfx Aoxybb Hoi Sen Load centre: 900 Mast type: Triplex Technical condition: good Front tyres type: Superelastic Rear tyres type: Superelastic Description: Find your forklift at STA-TECH! Whether hand pallet trucks, electric, diesel or LPG forklifts – we offer affordable, ready-to-operate models as well as new forklifts. STA-TECH is your partner for: ● Purchase and rental of forklifts and warehouse technology ● Purchase of used equipment and logistics ● Cross-manufacturer service: repairs, maintenance, inspections Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heating, full cabin,

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 14,082 h, load capacity: 8,000 kg, lifting height: 4,450 mm, fuel type: diesel, mast type: simplex, construction height: 3,580 mm, drive type: Diesel, Diesel forklift Load center: 900 Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Dcodpezvi H Nofx Ai Sjn Side shifter, fork positioner, 3rd valve, 4th valve, heater, full cabin, air conditioning,

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, max working width mm 2500, with automatic handling. Composed of the following machines: X04004A) Double Loader "BARGSTEDT" TBH 500/D/30/14 with central motorised roller conveyor X04004B) Turning station (90°) lengthwise to crosswise "HOMAG" Mod. TDR31/25/12 X04004C) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004D) Seperation Station "BARGSTEDT" X04004E) Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFR 620 / 19 / QA / 25 X04004F) 1° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D Dsdpfx Aijlikvhe Sjcn X04004G) 2° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004H) Turning station (90°) crosswise to lengthwise "HOMAG" Mod. TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004M) Double Stacker "BARGSTEDT" Mod. TSP 420/40/30/12 BA with central motorised roller conveyor

Condition: good (used), functionality: limited functionality, fuel type: diesel, color: yellow, Year of construction: 1996, machine/vehicle number: 50032, Equipment: cabin, hydraulics, Product Description Used wheel loaders Manufactured by KOMATSU model WA500-3 Operates on Diesel Engine Machine as its condition Please contact VIJAY Dedpfx Asum D H Eoi Secn JPN Industrial Trading Pte Ltd 13A pandan Crescent, Singapore 128478

Condition: used, Year of construction: 2011, Technical details: Rated capacity: 63 kVA Revolution per minute: 1500 U / min capacity: 50 (Wärmetauscher) KW type of fuel: (Erd) Gas Number of working hours: 87021 h weight: ca. 2300 kg Dcodpeu Nvp Sjfx Ai Sjn dimensions L x W x H: ca. 3,0 x 1,0 x 1,8 m CHP compact module (heat exchanger module) soundproofed with electric cabinet Engine: MAN; type E0834 E302; Gas-Otto 4-stroke engine, 1500 rpm; power mech. 54kW, ignition control unit Motortech MIC 500 (MIC 520) Generator: Leroy Somer; type LSA 43.2 8; type output 87 kVA; 1500 rpm; voltage 400V Heat exchanger module: Heattransfer, engine cooling water output 46kW; exhaust gas heat output 33kW; total heat output via plate heat exchanger = 79kW Connections for gas inlet, flue gas outlet, condensate drain and heating water on the side. with exhaust gas top *

Condition: excellent (used), SINGLE-SIDE Sizing-Milling & Edge Banding Line PRE-FORMING (DIRECT POSTFORMING), composed of the following machines: A) Double station bridge loader "TREVISAN", with motorised roller conveyor B) Single-side Sizing & Edge Banding "HOMAG" Mod. Profi VFL79/3/P/A Preforming Edges (tape) thickness in rolls (min/max) max mm 0.35 (for U and L profiles) Panel thickness (min/max) mm 16 / 30 (optional mm 50) Working width (min/max) min mm 150 - Variable feeding speed (m/min) 10 - 32 Numerical control / PC 22 software / WoodCommander 01°) Horizontal milling unit (for top incision) Kw 2,2 02°) Hogging Unit (Kw 15) 0°-15° (for pre-hogging from above) 03°) Milling Shaping Unit Kw 6,6 (top rebate milling) with Hydro-clamp 04°) Milling Shaping Unit Kw 6,6 (bottom rebate milling) 0°-120° (with Hydro-clamp) 05°) Milling Shaping Unit Kw 0.7 (radius milling for profile finishing) 06°) Milling Shaping Unit Kw 1.85 (U profile milling) HSK25 07°) Milling Grooving unit UF 11 (Kw 4) for grooving or rebate milling 08°) Milling Shaping Unit Kw 2,2 (milling for chamfering and laminate overhang at top) 09°) Milling Shaping Unit Kw 2,2 (milling for the bottom bend groove) 10°) RIGHT SIDE: Milling Shaping Unit Kw 6,6 (grooving & rebate milling) panel width mm 160 - 1050 11°) RIGHT SIDE: Fine trimming unit (2 x Kw 1) for top and bottom edging and finishing (0°-25°) 12°) Cleaner / Blower (Kw 0,55) of postformed piece 13°) Laminate overhang control (to detect laminate breakages) 14°) Glueing Unit (P.U.R) Glue (PU34+QA34) spray glue application (with nozzles) Djdpfx Ajnzhxqoi Socn 15°) Pressure zone for "L" profile (VF Direct) for panels up to max. thickness 50 mm 16°) Pressure zone for "U" profile (for spacer profile R = 2.5 mm) 17°) Upper Circular Knife 18°) Fine Trimming Unit / Finishing Unit (2 x Kw 0.55) HSK25 (0°-30°) 19°) Oscillating upper cleaner (1 x Kw 0.25) C) Double station bridge unloader "TREVISAN", with motorised roller conveyor

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 350 h, load capacity: 200 kg, empty load weight: 6,700 kg, construction height: 1,970 mm, fuel type: electric, total length: 6,050 mm, drive type: Elektro, arm reach: 7,600 mm, construction width: 1,500 mm, working height: 15,000 mm, Articulating boom lift Technical condition: normal Front tires type: solid rubber Front tires condition: 80 - 100% Rear tires type: solid rubber Rear tires condition: 80 - 100% Description: The Manitou 150 AETJ-C electric articulating boom lift is the lightest in its class, which means it exerts relatively low ground pressure with its wheels. With a lifting capacity of 200 kg and a working height of up to 15 m, this self-propelled work platform is the ideal solution for your transport and maintenance tasks. The drive battery can be recharged frequently and stands out for its long service life. In transport mode, the 150 AETJ-C remains under 2 m in height. Thanks to its compact design, it is easy to find storage space for this lift. Efficient work at height is made possible by the performance of the AETJ 150-C’s articulated platform. This electric model for two operators offers a maximum working height of 15 meters and features a basket with a perforated floor, perfectly suited for industrial requirements. With its articulated boom and robust construction, this machine can also operate in confined spaces. Avoid obstacles and improve responsiveness with the 150 AETJ-C. Thanks to the pod’s high autonomy, you can work all day without needing to recharge the machine. Dcedexuw Nvspfx Ai Sjn

Condition: good (used), Year of construction: 2017, operating hours: 21,801 h, fuel type: diesel, mast type: duplex, total height: 2,740 mm, total length: 3,820 mm, total width: 2,230 mm, color: other, Year of manufacture: 2017 Lifting capacity: 8.000 kg CE mark: yes Linde H80D Building year: 2017 Working hours: 21801 h Engine: Deutz Weight: 14039 kg Lifting height: mtr Closed height: mtr Mast: Duplex Capacity: 8000 kg Drive: 4x4 Attachments: CE certified Price is excluded VAT For more pictures and productvideo look at our website Good working condition Airconditioning Full Cabin Dedoyy Ixzspfx Ai Sjcn

Condition: used, Year of construction: 2013, operating hours: 30,000 h, load capacity: 8,000 kg, fuel type: diesel, power: 85 kW (115.57 HP), gearing type: other, empty load weight: 13,460 kg, color: red, mileage: 30,000 km, first registration: 06/2013, suspension: other, driver cabin: other, emission class: none, fuel: diesel, Equipment: air conditioning, - Year of manufacture: 2013 - Approx. 30,000 operating hours Dcjdozakuqjpfx Ai Ssn - Incl. lifting frame, currently removed for transport, without forks - Inspection possible at any time in Bad Salzuflen, errors and prior sale excepted... Air conditioning, VAT deductible, from first owner, diesel