Plastic boxes, reusable containers

Farbe Blau mit Deckel verzahnt

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, pressure: 1 bar, 1 used low-pressure steam boiler ----- Manufacturer: VIESSMANN Model: Vitoplex 100-LS Output: 580 kW Steam output approx.: 800 kg/h Water content approx.: 1,316 l Permissible operating overpressure: 1 bar Year of manufacture: 2001 CE marking: 0035 Bjdpfxsw I T E Ie Ag Nocw Equipped with Weishaupt gas burner, separate control cabinet, feed water pump, and the existing coarse and fine fittings.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: EKN7528, cooling capacity: 714.5 kW (971.45 HP), type of cooling: water, total width: 2,300 mm, total length: 7,050 mm, total height: 2,500 mm, Equipment: compressor, Used Trane RTAC 200 air cooled water chiller on R134A. Complete with Trane CHHP0N2TKE0N134A semi-hermetic screw compressor, condenser with 14 fans that produce a total airflow of 185.400 m³/h, shell and tube as evaporator, braced heat exchanger and a control panel with a Trane Adaptive controller. Bcedpferlk E Tjx Ag Nsw

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 2 h, total length: 12,200 mm, total height: 2,890 mm, total width: 2,440 mm, power: 1.65 kW (2.24 HP), fuel: diesel, Equipment: type plate available, These are three emergency generators, each with a 2000 kVA capacity and 1600 kW continuous output at a cos phi of 0.8. Voltage: 10 kV, frequency: 50 Hz. Bjdpfx Agjqqhuyo Necw A viewing is possible in 49733 Haren. Engine manufacturer: Perkins Generator manufacturer: Stamfort Design: 40" soundproof container with a sound level of 85 dB(A). Dimensions: 12,200 x 2,438 x 2,890 mm (L x W x H) Weight: approx. 35,000 kg The data sheet (German and English) is attached. The container also contains a 2,000 L tank for the initial diesel supply. The generators are regularly tested under load.

Year of construction: 2006, condition: used, Quadruple big bag filling system with weighing device Bsdper Ai S Rofx Ag Nocw Dismantled in 2023 and overhauled in 2024. Plans and pictures on request!

Condition: new, Step By Step Wet Painting Systems Elboy Industrial Solutions designs and manufactures full range of paint shops for your product. With ELBOY, you can navigate through your facility with virtual reality in the design phase, enabling you to make the desired changes in the design phase and not to encounter the surprise results. It provides designing and manufacturing services for your application by paying special attention to environmental pollution and work safety issues for the processes of Sandblasting, Putty, Washing, Undercoat and Finishing Coat for all sizes of products. Step by Step are systems with overhead conveyor or floor conveyors which can be designed for all sizes of product. Booths of Sandblasting, Chemical Washing, Pre-coat, Drying, Putty , Top Coat and Baking can be integrated into the system. In order to respectively carry out the processes determined by the system step by step, the automatic doors are opened at the end of the time period and the product automatically proceeds to the next process line. These fully automated systems are controlled via a 15” touch screen and provide various reporting methods such as main computer monitoring, product reporting and score reporting upon the demand and provide remote control. These are the paint shops where your product is designed and manufactured by our engineers in line with your capacity, use area and other demands. Maximum efficiency is aimed to be provided with minimum staff and the least space usage at electrostatic powder coating or wet paint, sandblasting, varnishing, coating, washing and similar system requirements. Bjdpfsdy Dw Aex Ag Nocw

Condition: reconditioned (used), Year of construction: 1984, Machine is modernized in 2015. Drilling capacity max. 20 mm Tool taper 2 MK speed 355/710/1400/2800 rpm spindle stroke 100 mm spindle throat 210 mm headstock adjustment 250 mm Bcjdpfegqukfox Ag New max. distance spindle-table 445 mm table surface 340X280 mm connected load 1,1 kW weight 0,165 t space requirement LxWxH 0,6 x 0,5 x 1,3 m

Condition: good (used), Qty 2 Linx Ink Jet Coders Models 7900 & 7300 In good working condition Fully serviced Bcedpokyumkefx Ag Now In working condition

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: M2019011975, cooling capacity: 430 kW (584.64 HP), Carrier Chiller 30 RBP-430-0095-PE (AquaSnap Series) Type: Air-Cooled Liquid Chiller Model: 30RBP-430-0095-PE Variant: 30RBM/RBP Serial Number: M2019011975 Year of Manufacture & Test: 06/2019 Manufacturer: Carrier SCS, Montluel, France (United Technologies, Carrier Corporation, USA) Technical Specifications: Nominal Cooling Capacity: 430 kW Refrigerant: R-410A Circuit A: 23.50 kg / Circuit B: 26.70 kg Total Charge: 50.2 kg GWP: 2088 Compressors: Danfoss Scroll SH240A4ACE (thermally protected) Power Supply: 400 V / 3 Ph / 50 Hz Maximum Current Draw: 340 A Maximum Starting Current: 210 A Power Input: 210 kW Operating Temperature Range: –20 °C to +52 °C Net Weight: 2760 kg Protection Rating: IP54 Pressure Data Refrigerant: R-410A Allowable Pressure (Min/Max): High side (PS): –1.0 / 44.2 bar (–99.0 / 4420.0 kPa) Low side (PS): –1.0 / 31.1 bar (–99.0 / 3110.0 kPa) Safety Relief Valve Setting: 42 bar Bcjdpfx Aoxb D Raog Nsw Rupture Disc Setting: 45 bar Test Pressure: 15.0 bar (unit leak test) Additional Information: Air-cooled design with axial fans and integrated condensers. Electrical control panel with Carrier management system. Hermetically sealed system, original Carrier service log included. Serviced and maintained by official Carrier service centre.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 25-029, total width: 800 mm, total length: 4,700 mm, total height: 1,900 mm, type of input current: three-phase, energy consumption: 2 kWh, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. Bodpfoqabm Ejx Ag Nocw If the machine is too small we can build also bigger. It is our demonstration machine. Throughput / capacity depending on material and purpose. Price on negotiation!

Condition: new, functionality: fully functional, ✅ New stock ✅ Immediately available ✅ Shipping possible The SCHORR Disc Mower RR580KRM is a powerful high-grass mower, designed to cut through dense, tall grass and brush with ease. With a working width of 58 cm, it allows you to quickly maintain meadows, roadsides, and orchards. The disc mowing system features four freely swinging blades, ensuring an even and high-quality cut. The swath deposit with a removable swath cloth enables clean handling of cut material without mulching. The RR580KRM is self-propelled and easy to operate—even on slopes or uneven terrain. Its wheel freewheel system allows for agile maneuvering, and mowing drive and wheel drive can be engaged separately. Applications: • Orchard meadows & grassland with tall vegetation • Roadsides, embankments, ditches, and fence lines • Fallow ground, border strips around farmyards, riding arenas, or storage areas Even on slopes of up to approx. 30%, the disc mower stays on track and provides a consistently high-quality cut. The swiveling, ball-bearing glide disc and flexible V-belt drive ensure smooth, low-vibration operation and reduced maintenance requirements. Ergonomics & Transport: The handlebar is height-adjustable and foldable, ensuring comfortable operation and space-saving storage. Weighing around 65 kg, the RR580KRM combines a sturdy build with agile handling. Technical Data: Manufacturer: SCHORR Model: RR580KRM Engine: Air-cooled, single-cylinder four-stroke, 6 HP Drive: Self-propelled Blade type: Freely swinging blades, 4 pieces Bcedpfx Ajxvb Ryeg Njw Weight: 65 kg Dimensions: Length 1070 mm, Width 570 mm, Height 840 mm Cutting height: approx. 30 mm Cutting width: 580 mm Spare parts are always available and our service team is ready to assist with any inquiries. Delivery or collection in 48465 Schüttorf is possible, collections strictly by prior arrangement. Financing or leasing options are also available – our team will be happy to advise you on the different options. The RR580KRM is immediately available, robust, agile, and ideal for both professionals and private users.