Container container system office container

Condition: ready for operation (used), Year of construction: 2004, operating hours: 60,425 h, functionality: fully functional, turning length: 1,050 mm, turning diameter: 465 mm, travel distance X-axis: 300 mm, chuck outer diameter: 325 mm, controller model: Fanuk Series 21I-TB, TECHNICAL DETAILS Max. turning length: 1,050 mm Turning diameter over cross slide: 350 mm Max. turning diameter: 465 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Max. spindle speed: 3,500 rpm Max. torque: 630 Nm Spindle bearing diameter: 120 mm Max. bar diameter: 90 mm Fpodpfey Hg S Hox Aa Nsg Tailstock stroke: 850 mm Quill stroke: 150 mm Rapid traverse X/Z axis: 30 m/min Number of tool turret positions: 12 Tool holder: VDI 40 MACHINE DETAILS Control: Fanuk Series 21I-TB Drive power: 33 kW

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Fpsdpfxevviyte Aa Njg Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 550 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 10,000 rpm, The machine spindle was replaced in 2022! TECHNICAL DETAILS Traverse path X-axis: 800 mm Traverse path Y-axis: 520 mm Traverse path Z-axis: 550 mm Spindle type: SK40 Spindle speed: 10,000 rpm Tool changer: 24-position Table size: 950 x 520 mm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (LxWxH): approx. 2.60 x 2.60 x 2.70 m Weight: 6,800 kg Operating Hours Machine on-time: approx. 47,000 h Program run time: approx. 5,700 h Spindle: approx. 4,800 h EQUIPMENT IKZ (internal coolant supply) Hexagon probe Note: NC clamps and tool holders are not included in the offer. Fpjdoy E Hqtjpfx Aa Nog

Condition: ready for operation (used), Year of construction: 1983, operating hours: 50,000 h, functionality: fully functional, operating pressure: 200 bar, overall weight: 33,000 kg, pressing force: 1,000 t, stroke length: 650 mm, travel speed (max.): 3,600 mm/min, TECHNICAL DETAILS Pressing force: 1,000 t Clamping force of the core plates: 30 t Travel speed: approx. 60 mm/s Operating pressure: 200 bar Stroke of the movable plate: 650 mm Stroke of the mold holder plate (towards operator): 980 mm Heating Plates and Heating System Heating plate size: 1,000 mm x 1,000 mm Number of heating plates: 7 Number of openings: 6 Fpjdpfx Aey Hhqdea Neg Opening dimension per opening: approx. 108 mm Specific pressure on plates: 100 kg/cm² Hydraulics and Power Units Hydraulic pump power: 9 kW Oil dynamic pump power: 11 kW Installed electrical power: 21.5 kW Hydraulic oil capacity: approx. 160 l Operating Fluids Amount of hydraulic fluid emulsified with water and 5% CIL-SOLIOIL-BK oil: approx. 1,300 l Nitrogen bottles (each 60 l at 200 atm) for accumulator pre-charging: approx. 10 MACHINE DETAILS Weights Weight of the press: 33 t Weight of hydraulic power unit: 0.4 t Weight of pump and accumulator: 1.9 t Weight of electrical unit: 0.2 t Total delivery weight: 35.5 t FEATURES Heating system with saturated steam Electrohydraulic power control device Electrovalve air venting system

Condition: used, functionality: fully functional, loading space width: 12,080 mm, loading space length: 19,250 mm, loading space height: 6,420 mm, Equipment: air conditioning, bathroom, hot water, lighting, 1 unit KLEUSBERG modular container combination Length: 19,250 mm . Width: 12,080 mm . Height: 6,420 mm Clear room height: 2,750 mm . 2-storey (with stairwell) The system is equipped with air conditioning, network technology, kitchen, server room, etc. Sale as shown in the images. Additional photos can be provided via email on request or you may arrange an on-site inspection appointment. Fjdpfxeyyyi Se Aa Njpg Model series 2750/3750 PLUS . Room height 2,750 mm. 19 units KLEUSBERG modular containers, model 3750 PLUS 1 unit KLEUSBERG modular container, model 3750 TO PLUS 1 unit KLEUSBERG modular container stairwell, model 3750 T PLUS 1 kitchen unit, type 1 as per building specifications 1 external staircase for series 2750/3750 (PLUS) with landing Note: The containers comply with the Energy Saving Ordinance (EnEV 2009) Dismantling and transport services can also be offered upon request.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,093 h, functionality: fully functional, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, controller model: MITSUBISHI M-720BM (MAPPS 2), counter spindle speed (max.): 5,000 rpm, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Turning length: 1,000 mm Main Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Counter Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Milling spindle speed: 0 - 12,000 rpm Tool holder: Capto C6 Tool stations: 100 positions Hollow clamping device: 67 mm MACHINE DETAILS Control unit: MITSUBISHI M-720BM (MAPPS 2) Operating Hours Operating hours: 26,875 h Spindle hours: 16,093 h EQUIPMENT Y-axis Fully indexable B-axis Chip conveyor, discharge right Standard coolant system Interface for high-pressure coolant system, 70 bar Fsdpfx Aajy Eydyj Njpg Tool spindle with through-spindle cooling Coolant spray gun Blow air through sub spindle Manual tool presetting on main spindle 3-color signal tower Double foot switch Simultaneous 5-axis machining Automatic power off Tool offset for 5-axis machining Programmable data input Dynamic interchange diameter/radius Stroke check prior to movement

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 2,157 kN, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 220 t Screw diameter: 55 mm + 40 mm Maximum injection volume: 618 cm³ + 251 cm³ MACHINE DETAILS Mounting platen: 960 x 830 mm Fjdpfxjy Exdxo Aa Nepg Minimum mold installation height: 320 mm Maximum mold installation height: 730 mm EQUIPMENT EC100/A03 Note: When purchasing multiple items from the same location (see offers below), you will benefit from reduced costs for disassembly and loading.

Year of construction: 1995, condition: ready for operation (used), Max. roll diameter: 400mm, height: 1753mm, documentation available. Fpsdpfxefwml Re Aa Neg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, clamping force: 1,961 kN, No reserve price – guaranteed sale to the highest bidder! Fsdpfey Exdlox Aa Nopg TECHNICAL DETAILS Clamping force: 200 t Tie bar spacing: 560 x 560 mm Screw diameter (first component): 60 mm Screw diameter (second component): 35 mm Shot weight (first component): 566 g Shot weight (second component): 178 g EQUIPMENT Two-component system Kraussmaffei Multinject system Note: When purchasing multiple items from the same location (see listings below), the lower costs for dismantling and loading will be waived.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, clamping force: 1,225 kN, controller model: CC100, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 125 t Horizontal cylinder: 35 Vertical cylinder: 18 MACHINE DETAILS Control: CC100 Fpjdpfx Aoy Exc Ija Nsg EQUIPMENT 1x hydraulic core pull BAP 1x proportional hydraulic interface for index plate BAP 16x heating zones (HK) 2x magnetic clamping plates for BAP and FAP Note: When purchasing multiple items from the same location (see offers below), you will benefit from the lowest costs for dismantling and loading.

Condition: used, functionality: fully functional, machine/vehicle number: ZA91000005K0K98154, maximum load weight: 2,000 kg, fuel: electricity, emission class: none, Year of construction: 2019, Compact electric transport vehicle. Ideal for use in low-emission zones. Fpedpfx Aajx I Nv De Nog

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, screw diameter: 45 mm, clamping force: 2,000 kN, No reserve price – guaranteed sale to the highest bidder!\n\nTECHNICAL DETAILS\n\nClamping unit: 2,000 kN\n\nScrew diameter unit 1: 45 mm\nScrew diameter unit 2: 45 mm\n\nMax. shot volume unit 1: 226 cm³\nMax. shot volume unit 2: 183 cm³\n\nMACHINE DETAILS\n\nMinimum mould installation size: 250 mm\nMaximum mould installation size: 750 mm\n\nEQUIPMENT\n2-component machine\nTie-bar-less design\n\nNote: When purchasing multiple items from the same location (see offers below), you will benefit from the most favourable disassembly and loading costs for each item. Fpjdpfoy Exatjx Aa Nog

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, clamping force: 1,225 kN, screw diameter: 30 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Fsdpfxoy Exage Aa Nspg Clamping force: 125 t Screw diameter: 30 mm Note: When purchasing multiple items from the same location (see offers below), you will only be charged the lowest applicable costs for dismantling and loading.

Condition: excellent (used), Zwick Type: BZ2.5/TN1S Zwick table testing machines Tensile strength measuring machine Area of application: Wide range of applications, from plastic and elastomer testing to paper, textile, foam and wire to component testing. Load frame: Max. test force FN in tension/compression direction 2.5 kN Height (h1) approx. 770 mm Width with electronic unit 320 mm Depth with electronic unit 414 mm Height of the work area h min ... h max: Traverse angle mounted upwards 227 ... 573 mm Fpjdpfsfnm Dqex Aa Nsg Traverse angle mounted rotated by 180° 57 ... 403 mm (each without connection bolt) Connection values: Electrical connection 115/230 V 4/2A-1PH/PE/N Power consumption 0.4 kVA Mains frequency 50/60 Hz 2.5 kN Condition: used Scope of delivery: (see image) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 2,942 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, No minimum price – guaranteed sale to the highest bidder! Engel injection moulding machine including robot! TECHNICAL DETAILS Fpodpfx Aajy Ew U Ao Nsg Clamping force: 300 tons Screw diameter: 70 mm Max. shot volume: 1,039 cm³ EQUIPMENT 3x core pulls Robot Note: When purchasing multiple items from the same location (see offers below), the respective lower costs for dismantling and loading will be waived.