Cutting length: mm 2000.
Dx2ws3
Cutting thickness : mm 4/6.
Main motor power : Hp 6.
Motorized rear register.
Basement in single steel body.
Cutting angle adjustment.
Blades gap adjustment.
Safety protections.
sheet width 4040 mm
plate thickness 6 mm
distance between columns 4040 mm
back stop - adjustable 1000 mm
Ocmddrns9
no. of strokes 19 Hub/min
total power requirement 15 kW
weight of the machine ca. 8,6 t
dimensions of the machine ca. 5,8 x 2,2 x 1,9 m
rear stop can be oiperated electrically
Accessories:
angle stop
digital readout
sheet width 4100 mm
plate thickness 4 mm
rear stop 1000 mm
cutting gap adjustment ja
weight of the machine ca. 8700 kg
dimensions of the machine ca. 4900 x 2400 x 2000 mm
Be02akwqvn
The machine was partially overhauled in 2014.
Back stop and control cabinet new
Power in mm: 3050 x 4.0 mm
Xbpktj0
drive type: el./hydr.
drive: 7,0 kW
Remark:
el. rear stop,
front stop,
material supports,
foot release
Weight: 5000 kg
Max. Cutting length: 2540 mm Max. Cutting thickness: 4 mm steel Moto. Back stop up to 750 mm, side stop Weight: 4000 kg
3q8fuwzk
sheet width - max. 1255 mm
plate thickness 4,0 mm ST
plate thickness 2,0 mm VA
plate thickness 6,0 mm ALU
number of strokes - loaded ~ 20 Hübe/min.
cutting angle 1,5 °
total power requirement 7,0 kW
weight of the machine ca. 2.600 kg.
** Machine from a technical college - prototype construction
Furnishing:
- electr. / hydraulic guillotine shears
- electrical backgauge with digital display
- electrical cutting length limitation
- electrical cutting angle adjustment
- manual cutting gap adjust...
sheet width 3000 mm
plate thickness 3 mm
Ffmpstvwu
distance between columns 3100 mm
no. of strokes 28-115 p. Min.
fence distance 500 mm
total power requirement 8,6 kW
weight of the machine ca. 5,2 t
dimensions of the machine ca. 3,7 x 2,8 x 1,5 m
Condition: ready for operation
Electric 380 Volt
Support arms 3
Squaring arm
Protective railing + photoelectric barrier
Foot switch
Back stop with manual adjustment
Hydraulic guillotine shear, German quality brand LOTZE, control panel wi...
Hydraulic Shear MS 2504
• Cutting Length (inch) 100
• Cutting Capacity (Mild Steel) 10
• Stroke Per Minute 35
• Rake Angle 2°12′
• Table Height (inch) 31
• Table width (inch) 18
• Backgauge Range (inch) 30
• Back gauge power (HP) 0.75
• Motor (HP) 4.71
• Backgauge Speed (ipm) 10
• Number of Front Support Arms 2
• Length (inch) 120
• Width (inch) 89
• Height (inch) 52
• Weight Approx. (pounds) 7,260
Easy Blade Gap Adjustment
40” Squaring Arm with T-Slotted and Disappearing Stop
Two 40” Fro...
plate width: 5150 mm
plate thickness: 1 mm
distance between columns: 5190 mm
total power requirement: 7,5 kW
weight of the machine ca.: ca. 6,0 t
space requirements approx. LxWxH: 6,0x1,1x1,8 m
- throat: 85 mm
- foot pedal control
S8ysgrbxg
- down holder
- no back gauge
Can be inspected under power.
working width: 3070 mm
Btmhnmycyb
for sheets with a strength of 45 kg up to: 3.5 mm
Stand projection:
Cutting angle: 1.5 °
Number of strokes, continuous / single stroke: 50/40 / min
Drive power: 9 kW
Controlled backgauge adjustment up to: 650 mm
Table width: 350 mm
Weight: approx. 3.2 t
Required space: 3550 x 750 x 1200 mm
Max. Length of cut: 2550 mm
Max. Sheet thickness: 4 mm steel
mass: about 3400 kg
Hydraulic guillotine shears Manual backgauge up to 1000 mm using a crank Side stop Cutting length limitation Cutting edge lighting Shear angle adjustment
Bqjwrgpd3x
sheet width 2550 mm
plate thickness 4,0 mm
C0xpcta
cutting angle 1,5 °
no. of strokes 18 - 36 Hub/min
engine output 7,5 kW
back stop - adjustable 10 - 750 mm
range L-W-H 2.495 x 2.161 x 1.910 mm
weight 4.000 kg.
Furnishing:
- link-guided / hydr. Guillotine shears
- electrical backgauge
- analog display for backgauge position (X axis)
- electr. Cutting angle adjustment
- electr. Cutting length limitation
- 1x extra long side stop
- foot switch
* Machine video:
- ?v=8wAptZAyLw0
sheet width:3000 mm
Mezjj
plate thickness:4 mm
distance between columns:3300 mm
rear stop:700 mm
strokes per minute:19 - 50 Stk/min
engine output:7,5 kW
total power requirement:ca.10 kW
weight of the machine ca.:ca.5 t
dimensions of the machine ca.:3,7 x 1,5 x 1,9 m
Liptovske Strojarne hydraulic guillotine shear NTE 4000/4
year 1996
working width 4050 mm
max sheet thickness 4.0 mm
Dx20we
motorized backgauge
Hera HSS - III guillotine shear,
Yp2p8
Year of manufacture 1992,
passage 4100 mm,
working width 4000 mm,
max. cutting thickness AW 5754 3 mm / 4000 mm,
cutting 1000 mm,
pneumatic high / low pressure,
contact stop,
manual cutting belt adjustment,
electr. backgauge,
plate thickness 4 mm
working length 2060 mm
Bt8vhgyh2d
sheet width / mm
total power requirement 7,5 kW
weight of the machine ca. 3 t
Max. Cutting length: 2000 mm Max. Cutting thickness: 4 mm steel Motorized backgauge with digital display up to 1000 mm with 2 speeds Side stop and table extensions Cutting length limitation Cutting edge lighting Weight: approx. 3000 kg
Fw03pev
sheet width 2050 mm
plate thickness 3,25 mm ST
thickness at "Niro-steel" 2,0 mm VA
engine output 7,5 kW
table height ca. 850 mm
weight of the machine ca. 2.500 kg.
range L-W-H 2550 x 1770 x 1450 mm
Furnishing:
- hydraulic guillotine shears
G0hytldbu
- electrical backgauge with analog display
* Fine adjustment via handwheel
- 2x side stop
- 1x support arm
- manual cutting gap adjustment
- foot switch
CNC plate shear make EHT type TSS 4-20
make # 107785, year of construction 1998
technical data:
working length 2020 mm
max sheet thickness at 450 N/mm2 4 mm
oil quantity 160 l
electrical connection 400 V, 50 Hz
drive line 7,5 kW
dimensions approx. 2800 x 2150 x 2150 mm, weight approx. 4,5 t
with
- CNC control ELGO P 8721
- holding up device
- scrap chute
- foot switch
- automatic cutting angle
- automatic cutting gap adjustment
Jv9kgi
- 3 angle stops in front
- cutting line illumination
in littl...
General Data
Machine weight 3700 Kg
Control Unit
Brand SWAH
Model SIEMENS SIMATIC PANEL
CNC main language English
Main Drive
Maximum sheet thickness 1.2 mm
Workpiece
Workpiece X 1500 mm
Workpiece weight 5000 Kg
Max Material Thickness
Steel 1.2 mm
Stainless steel 0.8 mm
Media
Main electronic connection 400 V 50 Hz
Power consumption 6 kW
Additional Equipment
Decoiler.
Oyngb
Spare blades.
This SWAH LCP-S Shearing Machine was manufactured in the year 2013 in Czech Republic. It has a producti...
Capacity 8' x .125'' approx. 2440 mm x 3mm
Foot pedal operated
shadow line
Button operated back gauge
1 squaring arm
2 support arms
Btlg07hdcx
sheet width 3000 mm
plate thickness 4 mm
Puin3a
distance between columns 3100 mm
total power requirement 7,5 kW
weight of the machine ca. 5 t
dimensions of the machine ca. 4400x2100x1700 mm
Max. Cutting length: 4000 mm Max. Sheet thickness: 4 mm steel Controlled back stop up to 1,000 mm, side stop and table extensions Cutting length limitation Cutting edge lighting Protective fence, rollable with safety switches Weight: approx. 8500 kg
Bolxaqh7be
Hydraulic guillotine shears LVD MV 25/4 built in 1977.
Oygby2q
Characteristic data:
- maximum thickness of cut sheet: 4 mm
- maximum sheet width: 2500 mm
Technical specifications:
- max. Thickness of cut sheet 1.2mm,
- max. Working width: 3000 mm
- in the equipment there is a stop for adjusting the cutting depth and a frame for holding the plate.
- the extension table makes it easy to carry large-format metal sheets on the table
- measuring table with graduation
- robust and compact steel construction
- high-quality, durable steel knives
- extremely stable and heavy construction of cast iron
- ground and hardened plate shear knives
- Back gauge ...
Chop shear 1600
Btge9sevhu
Max strip width 1600mm
Max thickness 5mm
Power: N.2 hydraulic cilinder bore 150mm
Without power unit
Without one blade
guillotine shear with rear stop and stacker
design: pendulum cut
cutting length: 3.050 mm
plate width: 1.000 mm
plate thickness: 4,5 mm
Bte7j9twsq
Plate shear up to 6mm steel plate on a length of 6200mm.
Max sheet thickness: 6,35mm
Max cutting length: 6200mm
Backgauge range: 1000mm
Max cutting angle adjustment: 1,5°.
Number of strokes min 10/minute
Number of strokes max: 30/minute
Mv2sss
Engine power 18,5kW
Weight 18 tons
Hydraulic oil 350 litres
Motorized guillotine shears
sheet thickness basic steel 0,1 - 4 mm
Working length 2.050 mm
Machine frame and drive systemᐸ/pᐳthe machine frame is a very sturdy fully welded steel construction.
the upper cutting blades can be used on both sides and the lower blades have 4 cutting edges
A stable continuous hold-down device fixes the sheet metal close to the cutting line.
The optimum cutting gap for the respective processing can be adjusted manually Material supportᐸ/pᐳThe sturdy lateral angle stop...
Haco hydraulic shear
Model HSL 3006
Year : 2001
Capacity : 3000 x 6 mm.
Ytj0ko
Power backgauge
Cutting length: mm 3100
Cutting thickness: mm 4
Recess: mm 500
Steel basement supports sheet metal.
Motorized rear register.
NEW MAPER programmer for rear register stroke visualization.
Cutting angle adjustment.
Cutting blade stroke adjustment.
Sheet-metal support brackets supplied.
Bmc9kvfx0x
Cutting length 3000 mm max sheet thickness 400 N / mm 2 maximum thickness of 4 mm 750 N / mm² 2 mm cutting angles 1° 30'
Motor power 7,5 kW
Bbxyhuk0kc
Dimensions, L x W x H machine 4550 x 2250 x 1780 mm
Weight 5500 kg
Accessories / special features:
• CNC control with touch screen 10 "for back gauge, angle, length and cut gap adjustment
• Controlled back gauge, length 1000 mm, with dust-resistant and maintenance-free, double ball-bearing rolls of Diabolo
• Stable long side stop 2000 mm with sca...
material length 3030 mm Plate thickness 4 mm, distance between columns 3220 mm, Table widtj 400 mm, throat depth 200 mm
Boqpm2vc
motorized back gauge, blade gap adjustment manually
LVD hydraulic guillotine shear 4100x4
working width 4100 mm
max sheet thickness 4 mm
motorized backgauge
Elgo control digital
Owpxf
Motorized guillotine shears
sheet thickness basic steel 0,1 - 3 mm
Working length 1.350 mm
Machine frame and drive systemᐸ/pᐳthe machine frame is a very sturdy fully welded steel construction.
the upper cutting blades can be used on both sides and the lower blades have 4 cutting edges
A stable continuous hold-down device fixes the sheet metal close to the cutting line.
The optimum cutting gap for the respective processing can be adjusted manually Material supportᐸ/pᐳThe sturdy lateral angle stop...
Used signing table Dietech Pneumatic version, 1000 x 1000 mm, used, with 2×5 adjustable centers, for signing off gutters etc.
2 x 5 center points, adjustable, pneumatically operated
Measuring bar for the center points
Table: 1000 x 1000 mm
Material: zinc/copper/ steel/ aluminium, etc.
Notches in the table for easy removal of plates
Vumvudnj
Control lever left and right for the respective center points
Factory: Lotze
Type: 269 4000-4
Built: 1988
Power: 4,000 x 4 mm
Dimensions: About L 5.0 x B 3.4 x H 2.1m
Weight: 9t
Facilities:
-Angular attack
Cizfyghh
-Foerderband with high-stopping function
-Motor bombing
All information without daring, interim sale reserved.
The machine is in very good condition. A demonstration is possible at any time in our exhibition hall.
plate width 1.050 mm
plate thickness 3 mm
0hcef99
Hydr. Table shears Fabr. MENGELE type S 4-5000
Masch.# S 2237 5000/3 year 1976
Technical data:
Cutting length 5050 mm
maximum sheet thickness 3.0 mm
Q208np8n
lateral ones. Throat depth 300 mm
Cutting angle 0.6 °
Strokes per minute 34
Number of holders of 22
MOT. Back gauge 0-1000 mm
lateral ones. Angle stop 2000 mm
Operating pressure 230 bar
Blank holder pressure 58 bar
Oil filling 200 l
11 kW
External dimensions approx. 5750 x 2500 x 1700 mm
Weight approx. 15 t
with
-mot. Backgauge
-Angle stop...
A presentation of hydraulic plate shears with positioning control ELGO,.
Ball screw and linear Guide for Backgauge
Hydraulic system BOSCH/REXROTH
Electrical components SIEMENS/SCHNEIDER
Dwhtte
Back gauge with light sensor
CE standard with certificate
Documentation
Cutting length 2500 mm
Cutting capacity in steel 400 n / mm² 4 mm
Fixed cutting angle 1,5 °
Backgauge control 1000mm
Side stop 1000 mm
Tech. Data and dimensions excepted.
Hydraulic plate shears Hezinger CutLine model HGR 1204
Nhl8x
Cutting length 1250 mm
Thickness of sheet metal (400 N / mm2) 4,0 mm
Sheet thickness (700 N / mm 2) 2.5 mm
Strokes per minute at 1.5 ° 27
Strokes per minute at 1.0 ° 31
Holders 10
Positioning range back gauge 5-1,000 mm
Motor output 5.5 kW
Oil 55 L
Dimensions - length 1,680 mm
-2,320 mm width
-Height 1,720 mm
Weight 2.200 kg
3190x2.5 mm,4.0 mm Aluminium, with NC motor stop, elGO control mounted on swivel arm, with manual cutting gap adjustment
machine is repaired, tested, rupee by the skilled person and is then fully
Functional. Test run is performed.
Colour: orange
Total power requirement: 5.5 kW
Machine weight: 2800 kg
Room requirement: 3800 x 1400 x 1500 mm
with cutting gap adjustment
Xgqki02o
Connection voltage: 16 A
with holder
Stroke rates per minute: 50 stroke/min
Angular stop incl. 3 m angle stop
Rear stop...
HERA 6100 mm Hydraulic Guillotine Shears
Fb8rqip
Cutting length 6100 mm
350 cm
HSS4 type
Production year 1981
7.5 kW supply
In addition, the set includes a table visible in the pictures
Kod towaru: 8269
powerful drive with gear motor and massive chain support
Circular waves guided back gauge 750 mm driven by ball screws
Positioning control of the rear fence Maper HT071 with digital display
Nkztp
heavy and sturdy steel welded construction
constant, low cutting angle for optimum cutting results
Control Panel on the left side of the machine
Side stop 1,000 mm with scale and T-slot
2 material support arms 500 mm with T-slot
Balls in the supporting table for easier transport of goods
Cutting gap adj...
A used well preserved hydraulic guillotine shear DIGEP
cutting length 3050mm
Nxny7
cutting capacity 4mm
Motorized backgauge 1000mm
Power 7,5kW
Side stop
Support arms
Tech. Data and dimensions: Errors excepted.
Further tech. data see pdf.- document
working width 4 m
max. sheet thickness 3 mm/ 490 N/mm2
distance between stands 4100 mm
gap 200 mm
number of strokes 22/min.
Main motor 3 kW
voltage 380 V
width 4633 mm
depth 2648 mm
height 1400 mm
weight 6,5 t
B3jp8y20
1 axis control ELGO P8511 new in 2010
motoric back gauge 1000 mm
3 front arms
hydraulic hold downs
foot switch
Simple construction, uncomplicated operation and versatility of use are the most important features of the GLT-H 3000/1.2 guillotine shears from Prod-Masz.
The guillotine shears offered by us are designed for cutting non-hardened thin sheet metal in the range of sheet thickness up to 1.2 mm and max. cutting width 3000 mm.
The guillotine is manufactured using CNC technology, which guarantees precise cutting, high productivity and long and trouble-free operation.
We offer both manual and hydraulic...
This may be of interest to you
How to receive 100% of our e-mails
Morlock Motors official partner of Machineseeker and Truckscout24
