150,000 litre / 150 m³ extinguishing water tank

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 724, saw blade diameter: 600 mm, table height: 850 mm, positioning accuracy: 0.4 mm, rotational speed (max.): 3,000 rpm, working length: 8,000 mm, TECHNICAL DETAILS Saw blade diameter: 600 mm Motor power: 12.5 HP Saw blade speed: 3,000 rpm Working table height: 850 mm Extraction ports: 3 units, diameter: 100 mm Max. working length: 8,000 mm Positioning accuracy: +/- 0.4 mm Cutting capacities Width 610 mm, height: 30 mm Width 580 mm, height: 60 mm Width 530 mm, height: 100 mm Width 490 mm, height: 120 mm Width 450 mm, height: 140 mm Width 380 mm, height: 160 mm MACHINE DETAILS Ffedjyf Evyspfx Afpsu Drive system of saw unit: hydraulic Discharge area: 4,000 x 600 mm Compressed air requirement: 7 bar Dimensions & Weight Overall dimensions of assembled machine (L x W x H): 13,000 x 2,000 x 1,600 mm Transport dimensions (L x W x H): Machine 1,200 x 1,700 x 1,600 mm Transport dimensions (L x W x H): MATRIX pusher 8,800 x 1,500 x 1,500 mm Weight: 1,600 kg EQUIPMENT Feed system with precision rack and pinion and brushless motor Position measurement via magnetic tape Pneumatic lifting of the pusher with workpiece measuring probe Cutting cycle control via keyboard or remote PC Operator software with 99 programmable cutting cycles Operator software with 1 cutting cycle for 100 programmable dimensions Safety cover for cutting area Two-hand operation safety device Discharge flat table

Condition: refurbished (used), Extinguishing water tank according to DIN 14230 (underground extinguishing water tank): 100,000 liter extinguishing water tank for underground storage, single or double walled, 1 manhole DN 600 with blind cover incl. seal and screws, outside with bitumen insulation - second-hand -... tank volume: 100.000 liters / 100 m³ length: approx. 15.750 mm diameter: approx. 2.900 mm weight: approx. 11.600 kg Material: steel material S 235 JRG 2 The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire department coupling/fixed coupling A according to DIN 14319 in the design form B without gauge connection. Furthermore, the tank has a venting flange connection in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground. Ffjdpfei Enwvsx Afpju - The tank is emptied, cleaned and has been provided with a bituminous exterior coating by us at the factory. On request, we can provide the tank with a bitumen-based full interior coating (against corrosion) or epoxy resin interior coating We can offer you a cost-effective delivery with our own truck. Just let us know the place of delivery, you will immediately receive the exact freight costs. An inspection is possible at any time after prior appointment. If you need any further information, just give us a call or send us an e-mail to b.barth(at)barth-tank.de. Trade-in and purchase of tanks/vessels is possible, just contact us. We have such tanks of course also in the following sizes constantly in stock: - 10.000, 13.000, 16.000, 20.000, 25.000, 30.000, 40.000, 50.000, 60.000, 80.000, 120.000 liters.

Condition: ready for operation (used), functionality: fully functional, cutting length (max.): 3,550 mm, cutting width (max.): 530 mm, overall weight: 9,000 kg, stroke length: 100 mm, TECHNICAL DETAILS Fjdpeyf Eucofx Afpjfu Usable cutting length (as double guillotine): 3,200 mm Usable cutting length (as single plate shear): 3,550 mm Press stroke: 100 mm Press width: 550 mm Min. cutting width: 18 mm Max. cutting width: 530 mm Scrap setting range: 0/50 mm Operating pressure: 6/7 bar MACHINE DETAILS Installed total power: 13.9 kW Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,700 x 1,800 mm Weight: 9,000 kg EQUIPMENT Robust steel construction Blade beam made of cast iron Self-lubricating prismatic guides Adjustable rear support Press for holding the veneer package during cutting Photoelectric cells Electronic programming device Perimeter safety guards

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, cutting length (max.): 4,400 mm, cutting width (max.): 4,300 mm, main saw diameter: 350 mm, controller model: G-VISION, Equipment: scorer, TECHNICAL DETAILS Cutting dimensions: 4,400 x 4,300 mm Ffjdpfjyf Epyjx Afpou Saw blade projection: 90 mm Saw carriage feed speed: 5 - 100 m/min Pusher feed speed: 125 m/min Pusher return speed: 60 m/min Return speed: 100 m/min Main saw blade diameter: 350 mm Main saw motor power: 12.5 HP Scoring saw diameter: 180 mm Scoring saw motor power: 2 HP Extraction port: 200 mm Compressed air: 6.7 bar MACHINE DETAILS Control system: G-VISION Dimensions & Weight Dimensions (L x W x H; installed): 6,400 x 7,500 x 1,800 mm Dimensions (L x W x H; for transport) Machine: 6,500 x 1,500 x 1,800 mm Dimensions (L x W x H; for transport) Pusher: 5,200 x 1,200 x 1,200 mm Total weight: 3,200 kg EQUIPMENT Automatic horizontal panel saw with clamps Frontal stack loading Three front air cushion tables Automatic pusher with lateral and top guides as well as 7 pneumatic clamps Automatic side alignment Automatic saw blade projection adjustment Electronic control of speed and position Easy access to saw carriage Pneumatic quick-change unit for tools Multitasking operating system Microsoft Windows XP/2000/NT Sequential control of cutting patterns Parametric control of feed speed Direct control of machine functions Cutting pattern adjustment

Condition: new, axle configuration: 3 axles, loading space width: 2,000 mm, loading space volume: 30 m³, total height: 3,690 mm, Equipment: ABS, Delivery time: approx. 4 months after receipt of order! Ffjdpfxogimzxe Afpeu Kässbohrer STN LC 30m³ slurry trailer NEW VEHICLE Tank # Self-supporting stainless steel tank (V2A, AISI 304i, DIN1.4301) # Volume: 30m³ # 1 chamber with 3 baffles # 1 x filling dome/manhole DN 500 # Steel walkway left & right # Ladder for climbing on the right # End floors & tank: RAL 9006 aluminum gray Chassis & axles # BPW Airlight II axles with 22.5 inch disc brakes # Wabco brake system EBS 4S/2M with RSS # Wabco ECAS air suspension system # 6 x branded tires 385/65 R 22.5 on steel rims # 1st axle as lift axle # Galvanized chassis made of double-T welded construction # Chassis: MB 7350 Nova gray Other & accessories # Aspöck 24V lighting # LED work light rear left # Plastic tool box rear left Rental also possible on request! ---- Subject to errors, changes and prior sale! Location: KTH-Trailer GmbH in 47574 Goch / Germany.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 60 mm, workpiece length (max.): 3,000 mm, overall weight: 2,700 kg, TECHNICAL DETAILS Working area X-axis: 3,000 mm Working area Y-axis: 1,000 mm Working area Z-axis: 60 mm Ffjdpsyf Elzsfx Afpju Maximum workpiece length: 3,000 mm Minimum workpiece length: 90 mm Maximum workpiece width: 1,000 mm Minimum workpiece width: 70 mm Maximum workpiece height: 60 mm Minimum workpiece height: 8 mm Vertical electrospindle power: 4.8 HP Circular saw unit diameter: 150 mm Circular saw unit power: 2.3 HP Vertical drilling spindles: 29 Horizontal drilling spindles (X-axis): 8 Horizontal drilling spindles (Y-axis): 2 MACHINE DETAILS Compressed air: 7/8 bar Total installed power: 20 kW Machine weight: 2,700 kg EQUIPMENT Numerical control with Biesseworks software Infeed table with motorized belts (left) 2 panel clamps Outfeed table with motorized belts (right) Protection for machining head with emergency stop front mats Transfer system for panel loading and unloading with aluminium profiles Belt-driven table for panel transfer/lifting bar BiesseWorks machining programming system

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,385 mm, travel distance Z-axis: 180 mm, controller model: Xylog, milling spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS X-axis working area: 3,085 mm Y-axis working area: 1,385 mm Z-axis working area: 180 mm Programmable X-axis speed: 50 m/min Programmable Y-axis speed: 45 m/min Programmable Z-axis speed: 22.5 m/min Drilling unit Vertical spindles: 10 Horizontal spindles X-axis: 2 Horizontal spindles Y-axis: 2 Motor power: 2.2 kW Speed: 4,000 rpm Milling unit Electrospindle: 10 HP Fodpfx Afjyf Ekkepsfu Speed: 18,000 rpm Engraving unit Motor power: 2.2 kW Speed: 6,000 rpm Worktable Number of worktables: 6 Vacuum suction cups: 18 Loading supports: 4 Vacuum pump Flow rate: 100 m³/h MACHINE DETAILS Control system: Xylog Installed power: 17/20 kW Compressed air: 6/7 bar Weight: 3,000 kg EQUIPMENT Automatic lubrication

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW Fodpowvqklsfx Afpofu • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: ready for operation (used), functionality: fully functional, overall weight: 5,000 kg, working width: 1,300 mm, workpiece height (max.): 130 mm, TECHNICAL DETAILS Working width: 1,300 mm Maximum working thickness: 130 mm Minimum working thickness: 1 mm Conveyor belt feed speed: 5/25 m/min MACHINE DETAILS Installed power: 32 kW Compressed air: 7 atm Dimensions & Weight Dimensions (L x W x H): 4,400 x 2,500 x 1,600 mm Fedpsyf Eh Njfx Afpjfu Weight: 5,000 kg EQUIPMENT Cross belt - Motor: 15 Hp - Electronic speed controller with display Transversal belt - Motor: 15 Hp - Electronic speed controller with display Transversal sanding belt size: 1,350 x 150 mm Chevron belt size: 5,510 x 140 mm Belt blower Fixed table and moving head for inline processing Rotary blower for panel cleaning Vacuum table Belt cleaning brush Infeed roller conveyor Extraction ports: No. 2 diameter 200 mm – No. 2 diameter 150 mm – No. 2 diameter 100 mm

Condition: ready for operation (used), functionality: fully functional, feed rate X-axis: 12 m/min, edge thickness (max.): 10 mm, overall weight: 1,530 kg, rotational speed (max.): 12,000 rpm, tool diameter: 80 mm, TECHNICAL DETAILS Panel height: 1,060 mm Maximum edge thickness: 10 mm Minimum panel length: 140 mm Minimum panel width: 85 mm Feed speed: 12 m/min Sanding Unit Motor power: 2.4 HP Speed: 12,000 rpm Tool diameter: 80 mm Extraction port diameter: 60 mm Gluing Unit Glue pot capacity: 2 kg Glue application roller diameter: 25 mm Pressure roller cutter, large roller diameter: 100 mm Pressure roller cutter, small roller diameter: 80 mm End Trimming Unit Ffsdpoyf Ed Rsfx Afpsu Motor power: 1.07 HP Maximum tool diameter: 140 mm Extraction port diameter: 80 mm Milling Unit Motor power: 0.87 HP Tool diameter: 70 mm Extraction port diameter: 80 mm Scraper Unit Extraction port diameter: 60 mm Joint Scraper Unit Extraction port diameter: 60 mm MACHINE DETAILS Compressed air connection: 7 bar Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,000 x 1,600 mm Weight: 1,530 kg EQUIPMENT Electronic control panel with USB port Sintra software Touch probe devices Vertical and front touch probe devices with rotating discs Removable panel support arm

Condition: new, axle configuration: 3 axles, loading space volume: 32 m³, Equipment: ABS, Delivery time: approx. 3 months after receipt of order! Kässbohrer STS 32 Bitumen Tanker NEW VEHICLE Tank # Self-supporting stainless steel tank (V2A, AISI 321, DIN1.4541) # Tank code: L4BH # Volume: 32 m³ # 1 chamber with 4 baffles # 1 x manhole / filling dome DN 500 # 4" bottom valve operated by handwheel # 4" gate valve # 4" discharge line with reduction in the middle at the rear 3? TW coupling # Aluminum walkway & ladder on the right side # Insulation made of 100mm glass wool # 250°C max. operating temperature # Tank color: RAL 9006 white aluminum Chassis & axles # BPW Airlight II axles with disc brakes 22.5 inches # Wabco brake system EBS 4S/2M with RSS Fjdsgimzuepfx Afpefu # Wabco ECAS air suspension system # 6 x branded tires 385/65 R 22.5 on ALUX aluminum rims ET 0 # 1st axle as lift axle # Aluminum chassis made of double-T welded construction # Chassis color: RAL 3020 traffic red Others & accessories # Aspöck 24V lighting # LED work light rear right # 2 x containers for fire extinguishers left and rear right (WITHOUT FIRE EXTINGUISHER) # Plastic tool box 400mm x 480mm x 600mm Rental also possible on request! ---- Subject to errors, changes and prior sale! Location: KTH-Trailer GmbH in 47574 Goch / Germany.

Condition: not inspected (used), functionality: unexamined, feed rate X-axis: 30 m/min, edge thickness (max.): 25 mm, overall weight: 3,500 kg, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Fodpfx Afsyf Ebvjpjfu Edge thickness min: 0.6 mm Edge thickness max: 25 mm Coil material thickness min: 0.3 mm Coil material thickness max: 3 mm Panel height min: 10 mm Panel height max: 60 mm Panel width min: 70 mm Feed speed: 8-30 m/min Extraction port diameter: 120 mm Blade diameter: 140 mm Blade spindle speed: 12,000 rpm Milling unit Milling unit tool diameter: 80 mm Milling unit motor power: 0.75 kW Milling unit spindle speed: 12,000 rpm Chamfering unit Chamfering tool diameter: 80 mm Chamfering motor power: 0.75 kW Chamfering spindle speed: 12,000 rpm Rounding unit Rounding unit motor power: 0.35 kW Rounding unit spindle speed: 12,000 rpm Sanding machine Oscillating sanding motor power: 1.5 kW Oscillating sanding speed: 1,400 rpm Brushing unit Brushing unit motor power: 0.3 kW Brushing unit speed: 1,450 rpm Compressed air requirement: 6 bar MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 8,200 mm x 1,500 mm x 1,650 mm Weight: 3,500 kg EQUIPMENT Fully automatic edge banding machine Sanding unit Processing of wood, veneer, PVC, ABS, and furniture edges CE certification Automatic pressure beam lifting Controlled guidance prior to sanding Group of 2 sanding units Glue pot with pre-melting unit Pneumatic pressure rollers Soundproof safety enclosure Tilting end trimming unit Edge sanding unit Feed speed variator

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 201011RX000004, feed rate X-axis: 20 m/min, workpiece height (max.): 120 mm, edge thickness (max.): 16 mm, overall weight: 2,400 kg, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Panel thickness min./max.: 10 mm / 120 mm Panel length min.: 140 mm Ffsdpoyf D Ubjfx Afpsu Panel width min.: 60 mm Edge thickness: 0.4 mm - 16 mm Variable feed rate: 10-20 m/min Edge height: 120 mm MACHINE DETAILS Installed power: 22 kW Compressed air: 6 bar Dimensions & Weight Dimensions (L x W x H): 6,730 x 1,500 x 1,910 mm Weight: 2,400 kg EQUIPMENT 10.7" color electronic touchscreen control Servo-controlled axis infeed guide Section 2 pre-milling unit - motors 2.2 kW - 6,000 rpm - diamond tools 100 mm x 120 mm x 30 mm Infrared lamp 0-600°C - 600 Watt Cooling anti-adhesive spray system Automatic edge feeder Universal gluing station with pre-melter for PUR and EVA adhesives Quick-release glue pot Servo-controlled axis pressure units Roller edge trimming for 3 mm PVC/ABS Glue pot cleaning table End trimming unit with 2 tilting motors, each 0.50 kW - 12,000 rpm Tilting trimming unit with servo-controlled axis - motor 1.1 kW - 12,000 rpm Corner rounding unit with 2 motors - 0.22 kW - 12,000 rpm Pull-off unit with servo-controlled axis Glue scraping unit Buffing unit - 0.18 kW - 1,400 rpm Dryer unit 0-600°C - 4,000 Watt Soundproof enclosure Fixed panel support roller conveyor Extraction: 7 inlets Ø80 mm, 1 inlet Ø120 mm

Condition: good (used), Used electrically heated stainless steel container / transport container item number: 10453 Final use: paints and varnishes volume: 1000 L Type: Standing in galvanized frame Material (in contact with media): 1.4301 / AISI304 Design: With electrical heating and insulation Base: Vaulted Top soil: Vaulted Operating pressure according to type plate: 0.20 bar Tank dimensions: total width: 1010mm total length: 1200mm total height: 1860mm distance drain to floor: 340mm materials: Interior: 1.4301 / AISI 304 Frame: stainless steel facilities: Ffedsfdgraepfx Afpou Nameplate: Yes Outlet Type: Pump Electrical trace heating

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 14219, travel distance X-axis: 1,250 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 560 mm, spindle diameter: 75 mm, spindle speed (max.): 1,800 rpm, With digital readout of travel distances! Ffedpsyfhghjfx Afpsu TECHNICAL DETAILS X-axis: 1,250 mm Y-axis: 900 mm Z-axis (or W-axis): 560 mm Spindle diameter: 75 mm Spindle speeds: 18–1,800 rpm Table size: 950 mm x 950 mm MACHINE DETAILS Weight: 10,000 kg