Used food processing machinery for sale (7,061)

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Kdedpezwxz Ejfx Aniou Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: excellent (used), Year of construction: 2012, The FORMAX F-6 burger forming machine is an automatic forming machine from the FORMAX brand (Provisur Technologies), designed for producing burgers, patties, and other formed products from meat, poultry, and non-meat ingredients. The set consists of the forming machine and a conveyor that receives the finished products, and includes a wide selection of round and oval molds from 45 to 200 g as well as spare parts. How does the FORMAX F-6 burger forming machine work? Raw material goes into the hopper, from where a feed screw carries it to the forming system. A high-speed mold plate fills the molds with the mass and gives the products the set shape and weight, and a pneumatic knock-out system places the finished portions on the conveyor. Changing the product range means swapping the mold, which allows quick changeovers between round and oval burgers of different diameters and weights. The machine is operated from a simple pushbutton panel. Key advantages of the FORMAX F-6 burger forming machine The compact construction and quick mold changes make the forming machine well suited to plants that produce different products in short runs. High repeatability of burger weight and shape results in uniform quality and easier portioning and packing. The set with a conveyor receiving the finished products allows the forming machine to be connected straight to subsequent stages of the line, such as breading, freezing, or packaging. The wide choice of molds supplied, from 45 to 200 g, and the included spare parts reduce downtime and make it possible to start production immediately. Technical specifications of the FORMAX F-6 burger forming machine Manufacturer: FORMAX Model: F-6 Power supply: 14 kVA, 380 V, 3 phases, 50 Hz Kedpfx Asz Rw Shjnijdu Capacity: approx. 450 kg/h Hopper capacity: approx. 136 kg Included: spare parts Dimensions of the whole set: 5000 x 800 x H: 1770 mm Forming machine dimensions: 2700 x 800 x H: 1770 mm Conveyor dimensions: 2040 x 560 x H: 1200 mm Available molds (dimensions and weight) Round molds: 90 mm (45 g) 90 mm (50 g) 105 mm (80 g) 127 mm (120 g, 150 g, 200 g) 130 mm (190 g) Oval molds: 125 x 107 mm (90 g) 142 x 119 mm (approx. 150 g) 156 x 132 mm (180 g, 200 g) Application of the FORMAX F-6 burger forming machine The FORMAX F-6 forming machine is used in meat and poultry processing plants for producing beef and poultry burgers, patties, formed minced meat, and nuggets. It also works well for non-meat products and in small and medium plants that need a flexible, compact forming machine.

Condition: excellent (used), Year of construction: 2012, The VEMAG HP30E vacuum filler is one of the most powerful models in the HPE series from the VEMAG brand, manufactured in 2012, designed for efficient filling and portioning of meat mixtures in large food processing plants. With a capacity of up to 8,700 kg/h, portioning from 5 g to 99,999 g, and a speed of over 600 portions per minute, the machine performs well in large-scale production of sausages, salami, and cold cuts. How does the VEMAG HP30E vacuum filler work? Raw material goes into the 350-liter hopper, from where it is fed into the filling system operating under vacuum. The vacuum system with a capacity of 40 m³/h removes air from the mass, so the product is compact, uniform in structure, and stable in color. Two separate VEMAG Duo-Drive drives — one for the conveying elements and one for the feed — allow continuous processing of even cold and firm masses, and the controls allow the portion size to be set precisely in the range from 5 g to 99,999 g. The machine works with clippers, linkers, forming machines, and hanging machines in complete production lines. Key advantages of the VEMAG HP30E vacuum filler Very high capacity of up to 8,700 kg/h and a portioning speed of over 600 portions/min allow continuous work with large batches of raw material. The wide portion weight range — from 5 g to 99,999 g — provides great flexibility, since both small portions and large products can be produced on a single machine. A one-piece hopper with optimized feed unit seals ensures reliable sealing and full emptying, which limits raw material losses. The electronics are protected by the VEMAG “box-in-box” system, and vacuum operation improves the quality, color, and shelf life of finished products. Technical specifications of the VEMAG HP30E vacuum filler Manufacturer: VEMAG Model: HP30E Year of manufacture: 2012 Power: 34 kW Kdodpfxjz Rw Tfs Aniju Filler capacity: up to 8,700 kg/h Portion weight: from 5 g to 99,999 g Portioning speed: > 600 portions/min Vacuum system: 40 m³/h Air demand: approx. 40 l/min Hopper capacity: 350 l Application of the VEMAG HP30E vacuum filler The VEMAG HP30E vacuum filler is used in large meat processing plants for producing sausages, salami, cold cuts, fillings, and formed masses. Thanks to its ability to work continuously with cold and firm masses and to cooperate with peripheral equipment, it suits automated production lines.

Condition: good (used), Year of construction: 2006, functionality: fully functional, FORMCCOK CONTACT COOKER MODEL: CC618 Kdedst Sg Txopfx Anieu PERFECT WORKING CONDITION

Year of construction: 2010, operating hours: 3,037 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 139737, Multivac R-145 thermoformer from 2010, in excellent condition and recently removed from production. It can be used for both soft and hard film. Film width: 420 mm. Includes 4 moulds: No. 1: 375 x 184 mm, maximum depth 100 mm. No. 2: 355 x 187 mm, maximum depth 65 mm. No. 3: 1:2, 132 x 95 mm. No. 4: 1:3, 190 x 110 mm. Built-in vacuum pump and MAP machine. Kjdpfx Aez I Dfzoniodu

Condition: used, Specifications: Kjdpfx Anoz Syl Heiodu Overall length: 1400 mm Overall width: 1250 mm Height: 400 mm Working length: 130 mm Working width: 1100 mm Load capacity: 1000 kg Weight increment: 100 grams Built-in battery Please check out my other listings.

Condition: used, Year of construction: 2016, Overview This Speidel Braumeister 200 L is a compact all-in-one brewhouse: mashing, lautering and wort boiling take place in a single vessel. The unit was bought new from Speidel in 2016 and has been used exclusively for craft ales (top fermentation), with about 280 brews. It was in production until August 2026 and is now dismantled and stored in a climate-controlled warehouse. The malt pipe sits inside the kettle; the recirculation pump drives the wort through the grain bed, and the integrated lifting device raises the malt pipe for lautering. The automatic controller runs the brewing programme. Technical data - Manufacturer: Speidel - Model: Braumeister 200 L - Year of manufacture: 2016 - Nominal brew volume: 200 L - Power supply: 400 V, three-phase, 50 Hz - Power: 9.3 kW; heating 3 x 3,000 W Kedpfx Anoz Sr H Noiodu - Dimensions: approx. 136 x 90 x 208 cm including lifting device - Weight: approx. 150 kg - Control: automatic - Utilities: no cooling water and no permanent drain connection needed in normal operation Equipment - Stainless steel lid - Malt pipe with perforated filter plates, fixing bar and clamp - Lifting device for the malt pipe - Recirculation pump - Automatic controller - Hoses, external connections, cable and three-phase plug - Printed manual; invoice, CE certificates and original documentation available Condition Used, in excellent condition: no known faults, leaks or pending repairs. Pumps, heating elements, seals and controller are original. Maintained quarterly according to the manual; routine cleaning with warm water and alkaline detergent, with caustic soda and nitric acid every five brews. The unit sits on its own frame and can be loaded without a pallet. A second, identical unit is available as a separate offer. Availability Available immediately. Location: Spain. Viewing is possible by appointment.

Condition: used, Year of construction: 2016, Overview This Speidel Braumeister 200 L is a compact all-in-one brewhouse: mashing, lautering and wort boiling take place in a single vessel. The unit was bought new from Speidel in 2016 and has been used exclusively for craft ales (top fermentation), with about 280 brews. It was in production until August 2026 and is now dismantled and stored in a climate-controlled warehouse. The malt pipe sits inside the kettle; the recirculation pump drives the wort through the grain bed, and the integrated lifting device raises the malt pipe for lautering. The automatic controller runs the brewing programme. Technical data - Manufacturer: Speidel - Model: Braumeister 200 L - Year of manufacture: 2016 - Nominal brew volume: 200 L - Power supply: 400 V, three-phase, 50 Hz - Power: 9.3 kW; heating 3 x 3,000 W - Dimensions: approx. 136 x 90 x 208 cm including lifting device - Weight: approx. 150 kg - Control: automatic - Utilities: no cooling water and no permanent drain connection needed in normal operation Equipment Kdsdpfxez Sr Uyo Aniou - Stainless steel lid - Malt pipe with perforated filter plates, fixing bar and clamp - Lifting device for the malt pipe - Recirculation pump - Automatic controller - Hoses, external connections, cable and three-phase plug - Printed manual; invoice, CE certificates and original documentation available Condition Used, in excellent condition: no known faults, leaks or pending repairs. Pumps, heating elements, seals and controller are original. Maintained quarterly according to the manual; routine cleaning with warm water and alkaline detergent, with caustic soda and nitric acid every five brews. The unit sits on its own frame and can be loaded without a pallet. A second, identical unit is available as a separate offer. Availability Available immediately. Location: Spain. Viewing is possible by appointment.

Condition: used, Year of construction: 2016, Overview This Haloila Octopus Compact is an automatic rotary-ring stretch wrapper for palletised loads, built in 2016 by Oy M. Haloila Ab in the inline version. It is sold together with its pallet roller conveyor with pallet lifter and its control cabinet. The machine was specified for wrapping barrels and canisters on pallets, is in very good condition and fully functional, and has been out of production since July 2024. It is still installed and under power and can be inspected on site. The rotating ring carries the film carriage around the stationary pallet, so the load itself is never turned - a compact layout suited to lines where the pallet runs straight through the winder on the conveyor. Technical data - Manufacturer: Haloila - Model: Octopus Compact, inline version - Year of manufacture: 2016 - Machine type: automatic rotary-ring pallet stretch wrapper (pallet winder) - Designed output: 32 pallets per hour (reference pallet height 1,200 mm, 14 wraps per pallet, double wrapping) - Pallet formats: 1,000 x 1,200 mm, Euro 800 x 1,200 mm and special 1,200 x 1,200 mm - Load: up to 1,200 x 1,200 mm, height 500 to 1,200 mm, up to 1,000 kg - Conveyor: roller conveyor, height 390 mm, speed 15 m/min, effective width 1,285 mm, roller pitch 166 mm, Movimot geared motors - Film carriage: AC-powered, pre-stretch up to 230 % - Film seaming: heat-seal pad - Power supply: 3 x 400 V, 50 Hz + N + PE - Connected load: 4 kW - Rated current: 10 A - CE mark on the machine plate Equipment - Rotating ring with film carriage and film pre-stretch unit - Roping device - Pallet roller conveyor through the winder, with chain transfer section and pneumatic pallet lifter with sensors - Photoelectric sensors for pallet and load height detection, photocells for load position - Control cabinet and touchscreen operator panel (German), signal tower - Signal exchange interface (DP/DP coupler) for connection to a line control - Safety fencing around the wrapping zone, safety light curtains at infeed and outfeed with muting - Restart push-buttons at the infeed Condition Kjdjz R Sxdopfx Anisdu Used, very good condition and fully functional. Out of production since July 2024. Sold without warranty. Availability Available immediately. The machine is still installed: dismantling and loading are to be arranged by the buyer. The matching oil filling line from the same site can also be offered on request. Location: Germany.

Condition: used, Hastamat CP 4.14/14 German 14-Head Combination Weigher / Multihead Dosing System (2007), Used Equipment Technical Data: Manufacturer: Hastamat Verpackungstechnik GmbH (Made in Germany) Type: CP 4.14/14 Machine No.: 997110550 Line No.: H5275 Year of Manufacture: 2007 Number of Heads: 14-head combination weighing system Power Supply: 230/400 V (3 × 400 V, N, PE) / 50 Hz Power Requirement: 3.0 kW Equipment and Features: Clean stainless steel (INOX) frame and product-contact surfaces Festo valve terminal and pneumatic system Omron VS mini J7 variable-frequency drive (VFD) control Siemens SITOP industrial power supply and Siemens LOGO! / Pilz safety PLC modules High-quality Mink-Bürsten guide brushes Can be connected to vertical or horizontal packaging machines (VFFS/HFFS) Overall Dimensions: Width: 1490 mm Kedpfxez Rzq Us Aniodu Depth: 1490 mm Height: 1730 mm

Condition: like new (used), Machine ready for operation Ksdpfx Ajy R Ecfsniodu Year of manufacture: 2014 Manufacturer: Dozo-Pak Bydgoszcz Type: MP-450 Power: 4 kW Weight: 260 kg Voltage: 400 V The listed price is for one mixer unit; four identical units are available Option to purchase a piston pump, Type PT-1, manufactured by Dozo-Pak in 2014 Price: 1,500 EUR per piston pump Please check out my other listings

Condition: like new (used), Machine ready for operation, year of manufacture 2017, and has only been used for 3 years in soup and sauce production. The machine cools products already packed in glass or plastic containers. Dimensions: Length – 10,330 mm Overall machine height – 2,078 mm Overall machine width – 4,505 mm Discharge height of containers – 1,100 mm Kjdpfx Aeyl Szveniodu Technical specifications: Maximum production: Plastic cup with a diameter of 95 mm and height of 116 mm, thermal cycle 52 minutes (20 minutes pre-cooling + 32 minutes cooling). Cup temperature: inlet +90°C – outlet +20°C Container/cup dimensions: Diameter 95 mm Height 116 mm Thermal cycle duration: 52 minutes (for 95 mm diameter cup) Empty machine weight: 5,100 kg Total installed power: 26 kW Voltage: 400 V Frequency: 50 Hz Air pressure: 6–8 bar Air flow: 25 Nlt/min Water flow at start-up: 3 m³/h Water flow at full operating speed: 0.2 m³/h Supplied complete with operating instructions in Polish and English.

Condition: excellent (used), Year of construction: 2020, 583 USED MEIKO basket washer. EQUIPMENT: - washer - left-hand table with sink - right-hand table - stainless steel mesh baskets TECHNICAL DATA: - year of production: 2020 - power supply: 3 N/PE 400V 50Hz Kdedjz Ihvwspfx Aniju - power: 22.9 kW The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: excellent (used), Year of construction: 2003, 576 USED KOMA CDS-M pass-through cooling-proofing chamber. EXTERNAL DIMENSIONS (in cm): - W: 196 - L: 340 Kdjdpfx Ajz Ihuasniou - H: 256 INTERNAL DIMENSIONS (in cm): - W: 148 - L: 268 - H: 200 TECHNICAL DATA: - year of production: 2003 - power supply: 3x400V 50Hz - power: 10.5 kW - refrigerant: R-404A The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Technical data - Manufacturer: Robopac - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm; industrial pallets and quarter pallets can be wrapped as well, centred on the conveyor - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW). Kedpfjzzz Rdex Anijdu

Condition: used, Tape dimensions: Length: 1600 mm Width: 1200 mm Drum diameter: 115 mm External dimensions: Width: 1900 mm Length: 2750 mm Height: 580 mm Feeder displacement using a pneumatic actuator over a distance of approximately 1000 mm. The stated price applies to one unit. Please see my other listings. Kdedpfxezdrbxo Anieu

Condition: used, power 298 kW gas burner 3 x 400V, 50 Hz dimensions (l x w x h ) : ± 1.700 x 1.200 x 2.200 mm in good condition + Pump Kjdpfx Anjz Tff Ujiodu

Condition: used, can be used as crumber or pre-duster (only dry coatings) ideal for irregular shapes all stainless steel Kdodpfez Uda Tex Aniju adjustable speed mobile outfeed conveyor belt width 400 mm outside dimensions (l x w x h) : ± 3.000 x 1.600 x 1.900 mm

Condition: used, Year of construction: 2023, Overview Kodez Sp Anopfx Aniedu Single-module tunnel warmer by TMCI Padovan (SAP-Blendtech), built in 2023 for filled beverage cans. The machine brings cold-filled cans from 5 °C to 25 °C with a 40 °C water spray over a treatment surface of 9 m², at an output of 35,000 cans per hour. It was configured for 0.33 l and 0.15 l cans. The tunnel body, frame and pipework are stainless steel. The machine is steam-heated, with a multi-tubular heat exchanger for condensate recovery, and a Siemens PLC with teleservice and a touchscreen HMI runs the process. The machine is currently installed and was seen in operation. Technical details - Year of manufacture: 2023 - Output: 35,000 cans/h - Can sizes: 0.33 l and 0.15 l, diameter 58.4 mm and 53.3 mm - Treatment surface: 9 m², single deck, 1 module - Treatment time: min. 4.5 minutes - Product temperature: 5 °C inlet, 25 °C outlet - Spray water temperature: 40 °C - Steam consumption: approx. 508 kg/h at 3 bar - Make-up water: approx. 1 m³/h - Instrument air: approx. 500 Nl/h at 6 bar - Installed power: 9 kW - Electrical supply: 400 V, 50 Hz - Conveyor height: 1,200 mm ± 30 mm - Footprint: approx. 6,300 mm long, 2,450 mm wide (3,030 mm including side piping) - Height: approx. 1,800 mm - Service clearance: 800 mm around the machine - Connections: water inlet 15-20 °C max. 2 bar, steam 3 bar, air 1/2" at 6 bar, basin overflow DN 100, basin drain 1 1/2" BSP Equipment - Single-deck tunnel warmer, 9 m², 1 module - Multi-tubular heat exchanger for condensate recovery - 1.1 kW blower for water recovery - Tank with condensate booster pump - Air conditioning unit - Active infeed and outfeed conveyor - Side inspection windows on the spray zone - Siemens PLC with teleservice, touchscreen HMI with process overview - Profinet port, cycle pause and auxiliary start buttons, emergency stop, main switch, signal tower Condition and availability - Built in 2023, currently installed and in operation - Layout drawing available - Availability on request - Location: Albania

Condition: used, The machine operated in a juice bottling line. The machine is in good working order and ready for operation. Application: It is used for the automatic packaging of various types of containers (glass and plastic bottles, jars, cans, doypack packaging) into collective cartons, boxes, or trays. This machine is very commonly used in the food industry, bottling industry (wine, beer), chemical industry, and in the production of oils. Capacity: up to 7000 bottles per hour (BPH) Model: Meta 2 Weight: 2600 kg Ksdpfxjz Szf Ij Anijdu Year of manufacture: 2003 Power: 4.12 KW/A Please check my other listings.

Condition: like new (used), Year of construction: 2014, The machine is in working order and ready for operation. Please take a look at my other listings as well. Kjdpfx Anoy R D E Soiedu

Condition: used, continuous grilling line all stainless steel adjustable product height with lower and upper belt : bottom and top grilling independent temperature control below and above net length 1.800 mm belt width 600 mm electrically heated ± 90 kW Kodsz Tffzspfx Aniedu belt washing system above and below adjustable temperature range per heating plate (6 pieces) capacity up to 250 kg/h depending on the product adjustable speed dimensions (l x b x h): ± 3.000 x 1.650 x 2.400 mm

Condition: excellent (used), 573 USED Dough processing line FRITSCH Easy Line. EQUIPMENT: - calibrator - cutting station + rollers - guillotine cutter EXTERNAL DIMENSIONS (in cm): - W: 115 - L: 800 - H: 210 TECHNICAL DATA: - power supply: 3x380V 50Hz The price is a net price. Paid options available: transport. Kdedjz Su D Ropfx Anisu Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Turatti mod Spiralizer for vegetables year 2018 / 11 Special solution for spiral cutting of products such as carrots, zucchini, cucumbers, broccoli stalk and squash violina, to obtain spaghetti baskets, noodles or simply the helical cut of the product. Also available in a compact version. The main features are: Cut into different shapes (spaghetti, noodles, pappardelle, etc.) Operation in continuous mode Kedjz I S Dxopfx Aniedu High capacity High yield Uniformity of cut Available in compact version.

Condition: good (used), Year of construction: 2002, The machine is in good condition. Kjdpfx Anoz Tdbzeiedu