Second-hand machinery for sale (2,00,000)

Condition: used, Year of construction: 2010, functionality: fully functional, Robotic palletizing system from W+D Langhammer, manufactured in 2010, featuring an ABB IRB 660 M2004 palletizing robot, ABB IRC5 M2004 controller, conveyor system, and safety enclosure. System manufacturer: W+D Langhammer GmbH Iiedsz Dnu Eopfx Ahneg System type: Robotic palletizing Year of manufacture: 2010 Factory number: A1005300-146900 Robot manufacturer: ABB Robot type: IRB 660 M2004 Robot variant: IRB 660-180/3.15 Robot manufacturing date: 07/30/2010 Robot serial number: 66Z-63572 Robot net weight: 1,750 kg Load capacity according to robot variant: 180 kg Reach according to robot variant: 3.15 m Robot controller: ABB IRC5 M2004 Version: 144A 400–480V Controller voltage: 3 × 400 V Frequency: 50–60 Hz Rated current: 20 A Short-circuit current: 6.5 kA at 400 V Controller net weight: 150 kg Controller manufacturing date: 08/02/2010 Robot operating device: ABB Teach Pendant System operation: Siemens SIMATIC Multi Panel Gripping system: Palletizing gripper included Conveyor system: Roller conveyors and infeed belts Safety enclosure: approx. 8 × 8 m Infeed belts: 2 units, each protruding approx. 1 m from the safety enclosure Outfeed roller conveyors: protruding approx. 2 m from the safety enclosure Langhammer system voltage: 3 × 400 V N PE Langhammer system frequency: 50 Hz Full load current: 35 A Short-circuit breaker: 50 A Note: The infeed and outfeed belt marked in the layout below with a red diagonal line is not installed and is not part of the system offered.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, overall weight: 2,000 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,200 mm, total height: 4,250 mm, filter area: 286 m², suction capacity: 18,000 m³/h, negative pressure: 3,500 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-operated for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 16 Year of manufacture: 2010 Cartridge filter elements, oval - DFO ULTRA-WEB FR - 16 pcs Filtration area: 286 m2 Iisdpfx Aoz Ayv Uohnsg Fan power: 18.5 Kw Fan model: FR 501 Built-in frequency converter. Remote monitoring of the device is possible thanks to Donaldson's iCue technology. Capacity up to 18000 m3/h Inlet diameter: 630 mm Noise silencer included. New filter elements, custom-made according to the device's intended use, are also available on request. Stock number: 1155

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 420 mm Travel range Z-axis: 450 mm Distance spindle nose – table: 120–570 mm Speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/air Tool holder: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Iedpfxezzlh He Ahnjig Heidenhain iTNC 620 CNC control system Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with double gripper Central lubrication Large access door to the work area Loading possible from above using an overhead crane Two waterproof work area lights CE certification The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No liability is assumed for printing and measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Year of construction: 2008, condition: used, functionality: fully functional, Industrial vacuum cleaner. Iisdpfxoz Dp Igj Ahnjg

Condition: like new (used), Year of construction: 2017, operating hours: 56 h, functionality: fully functional, total length: 1,976 mm, total width: 974 mm, total height: 1,500 mm, pressure (max.): 13 bar, noise level: 70 dB, nominal flow rate: 240 m³/h, The machine is in like-new condition with only 54 operating hours! Submitting a bid obligates the buyer to collect the machine on the following dates: Monday, October 5, 2026, Tuesday, October 6, 2026, Wednesday, October 7, 2026, Thursday, October 8, 2026, until 12:00 PM. The machine is already in storage. The technical data specified in the advertisement comes from a manufacturer's data sheet. The seller does not guarantee the accuracy of the data. TECHNICAL DETAILS Operating pressure max.: 13 bar Pressure setting range: 4–13 bar Volume flow: 22–66 l/s Iodpjzzmw Njfx Ahneig Volume flow: 1.3–4.0 m³/min Volume flow: 47–140 cfm Sound pressure level: 70 dB(A) MACHINE DETAILS Motor power: 22 kW Dimensions (L x W x H): 1,976 x 974 x 1,500 mm EQUIPMENT Elektronikon Graphic control system Oil-free, water-injected screw compressor ISO 8573-1 Class 0 VSD speed control Further technical data can be found in the attached data sheet.

Condition: excellent (used), functionality: fully functional, working width 230mm working height 120mm 5 heads heads set: bottom/right/left/top/bottom table lubrication pneumatic pressure of feeding rolls two axes heads regulation spindles speed 6000 RPM electric adjustment of pressure beam feeder with cardan Iisdpfx Aez Dn Swjhnsg variable regulated feeder solid silenced cabinet

Condition: good (used), Year of construction: 1989, operating hours: 3,536 h, load capacity: 2,000 kg, lifting height: 5,000 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, empty load weight: 3,500 kg, mileage: 3,536 km, Obtained through trade-in. Electric three-wheel forklift. Make: Hyster. Year of manufacture: 1989. Capacity: 2,000 kg. Lifting height: xxx. Mast height (extended): 2,200 mm. Hours on the meter: 3,536. Iiodpfoz Dg Ecsx Ahnjg Freelift. Battery: 2022. With charger. Watch the video on YouTube.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, On-site inspections while the machines are running are possible in Lithuania! Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ edge banding machines Workpiece width without edge at a workpiece thickness of 12–22 mm: min. 60 mm (depending on the workpiece length) Workpiece width without edge at a workpiece thickness of 23–60 mm: min. 100 mm (depending on the workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on a roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Clearance-type joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Clearance-type processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Side conveyor belt on the infeed table Electropneumatically controlled cross guard on the infeed table Manually adjustable infeed guard Set of small parts Integrated air cushion table Iiedpfxoz A Tx Tj Ahnog Fixed stop on the left side in the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross transport Controlled cross conveyor in the infeed Outfeed roller track Controlled cross conveyor in the outfeed Electropneumatically controlled stop guard Side transport belt Manually adjustable panel overhang

Condition: excellent (used), Year of construction: 1993, fuel type: electric, height 2300 mm length 3200 mm total wight 7300 kg Iiedpfx Ahsz Dkz Isnjg height of stroke 5175 mm weight max. 5 t weight 7300 kg

Condition: reconditioned (used), functionality: fully functional, Usable cutting length: 4000 mm Pneumatic tilting of the saw heads Iisdpfx Asz Dpzyshnog Tilting range: 90-45° Blade diameter: 450 mm

Condition: new, Year of construction: 2026, functionality: fully functional, Working area in X – Y – Z mm: 4,200 – 2,200 – 100 • Continuous work table • Lateral and bottom reference stops Iodpfez Dp Rbox Ahnjig • Gantry machine with Gandry system – Dual motorization • Milling unit with 4-axis electrospindle, HSD brand • Blade unit for 360° cutting via HSD electrospindle • Air cooling • ISO 30 tool holder • Inverter • 10-position tool magazine • Control system: OSAI • Software

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, power: 22.5 kW (30.59 HP), Equipment: documentation/manual, We offer a mobile, screw-type diesel compressor – CompAir Z30/B. Output: 22.6 kW – 3000 l/min. The compressor has undergone an oil, filter, and air separator replacement. The compressor is in excellent condition, fully functional, and free of defects. Large and small service manuals are included. Ijdpfxoz Dik Ue Ahnsig Operating hours: 3595 Year of manufacture: 2004

Condition: good (used), Year of construction: 2010, Striebig Panel Saw Compact 5220, Year of Manufacture 2010 Robust, self-supporting, firmly welded, and torsion-resistant saw frame Stable, durable saw beam steel construction Robust bearing of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.9 kW motor (5.3 HP) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; Hvertical: 2200 mm, Hhorizontal: 2100 mm Iisdpfx Ahjzhx A Rjnog Equipment: - Compact 5220 - Strip fence - Mechanically braked support rollers - Freestanding support complete Location: Available from stock in 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating Iijdpfez Ai Tpsx Ahnog 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: excellent (used), Year of construction: 2013, The EFI VUTEk GS3250 is a 3.2-meter, high-production UV hybrid flatbed/roll-to-roll printer. It is engineered to seamlessly bridge the gap between high-margin, photo-realistic point-of-purchase (POP) graphics and heavy-duty, fast-turnaround commercial print runs Eight colours + White Western Europe Isdpfxjz Dh N As Ahnsig Installation possible upon reqiest In production, demo possible Official documentation outlines the comprehensive technical specifications and facility requirements for the VUTEk GS3250 system are enclosed

Condition: reconditioned (used), functionality: fully functional, Drill press. Iedpfez Dp Akex Ahnoig

Condition: ready for operation (used), Year of construction: 2022, clamping force: 900 kN, screw diameter: 36 mm, Hydraulic injection moulding machine manufactured in 2022. This HAITIAN Mars III MA 900/280 A ECO features a clamping force of 900 kN and a maximum injection pressure of 2,340 Bar. It includes a screw diameter of 36 mm and a maximum injection volume of 121 cm³. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN Mars III MA 900/280 A ECO machine we have for sale. Contact us for further details. • Space between columns (tie-bar spacing): 360 x 360 mm • Maximum mold height: 390 mm • Minimum mold height: 150 mm • Maximum injection volume: 121 cm3 • Maximum injection pressure: 2,340 bar • Centering ring: 125 mm • Hot runners in the machine: 6 • Core puller: 2 • Pneumatic valve: 2 Iijdpfx Aez Dk Tqohnjg

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 730 mm, turning diameter: 400 mm, spindle bore: 66 mm, spindle speed (max.): 4,000 rpm, TECHNICAL DETAILS Iiodpfoz Ahybex Ahnjg Travel in X-axis: 240 mm Travel in Z-axis: 640 mm Turning length: 730 mm Turning diameter: 400 mm Spindle speed: 4,000 rpm Spindle bore: 66 mm MACHINE DETAILS Control system: Siemens Machine weight, approx.: 5,500 kg EQUIPMENT Automatic tool changer (ATC) Tailstock Parts catcher

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 3,000 mm, turning diameter: 700 mm, SMTCL CAK80285D CNC horizontal lathe, year of construction 2011, with original FANUC control. Iisdpsz An Rysfx Ahnsg Offered for sale by the first owner. All maintenance has been carried out without exception; the machine is still in active, trouble-free production use. It has not been heavily used - a machine with plenty of life left. Bed ways and slide surfaces are clean and in very good condition. Technical data: - Turning diameter over bed: 700 mm - Turning diameter over cross slide: 500 mm - Turning length / machining capacity: 3,000 mm (3 m) - Control: FANUC (original) Can be inspected under power in our workshop and is ready for immediate delivery.

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, input voltage: 400 V, Deckel FP4M Universal Milling Machine in excellent technical and optical condition. Machine no. 2203-1389 Year of construction: 1984. Technical specifications: - Working travel X/Y/Z: 500/400/400 mm - Spindle speed range: 50 - 2500 RPM - Power: 3.7 / 4.4 KW Iijdpfeytb Uhox Ahnjg - Spindle brake - Automatic feed: X-Y-Z, continuously adjustable, 6.3 / 630 mm/min - Rapid traverse X-Y-Z: 1300 mm/min - Fixed angle table - Vertical quill with 90 mm stroke - Tool holder: ISO 40/M16 - Weight approx. 1500 kg Machine options: - 3-axis digital readout Heidenhain - Coolant system - Chip tray - Central lubrication - Automatic pulse lubrication on the milling head - Machine manuals with spare parts list and electrical diagrams - Cabinet with accessories, see photos

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 89257, saw blade diameter: 450 mm, cutting height (max.): 150 mm, cutting width (max.): 250 mm, type of input current: three-phase, year of last overhaul: 2024, table length: 25,000 mm, A woodworking company in Latvia is offering a Weinig Dimter OptiCut 304 L optimization cross-cutting line for sale. The machine has had only two owners, both of which are well-known companies in Latvia. We have operated the machine ourselves for the past 8 years. The reason for sale is the recent purchase of new Weinig equipment. The machine is in full working order and is currently stored in a heated facility, ready for its next owner. The machine has only been operated on one shift. It is equipped with 5 sorting cylinders; however, the sorting conveyor can be extended, and additional sorting cylinders can be installed if required. The machine can be inspected and demonstrated in operation at our facility. Regular maintenance and repairs have been carried out throughout its service life to ensure maximum productivity, profitability, and high-quality optimization results. The machine operates with excellent accuracy. No modifications have been made to the original factory configuration. Spare parts have been regularly sourced from the official Weinig dealer in Latvia. The machine is available for inspection and testing in Kuldīga, Latvia. All original Weinig manufacturer documentation is available. Some spare parts are also available for this machine. Iodpfx Aoz Arqkohnjig We are also selling a Weinig finger-jointing line that was purchased together with this machine. Please see our separate advertisement for details. For further information, please contact us by phone or email, and I will provide all technical information, or additional images and videos can be made available.

Condition: used, Year of construction: 2018, Manufacturer: Ishida Model : CCW-RV-214W-1S/005-SS-LI Year: 2018 Type: Multi-head weighing machine Number of heads: 14 units Weighing capacity: max. 50 g per head Maximum weighing volume: 0.05 litres Speed: 120 weighings per minute HMI Materials: stainless steel. Isdpez Dk Nfefx Ahnsig Mobile unit + hydraulic pump up / down of the dosing system Applications: micro-dosing of tea leaves / soup ingredients / dehydrated vegetables / spices and herbs / tablets and capsules.

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 1000024667, functionality: fully functional, input voltage: 400 V, input current: 21 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,600 mm, workpiece width (max.): 900 mm, workpiece height (max.): 60 mm, workpiece weight (max.): 50 kg, total height: 28,840 mm, total length: 64,500 mm, total width: 21,320 mm, overall weight: 1,800 kg, Equipment: CE marking, documentation/manual, For sale: Biesse Brema Eko 2.1 CNC machining center. Machine from 2018, very little use. Operating hours: - Drilling head: 2883 hours - Electrospindle: 535 hours - Saw: 1253 hours Machine condition: Very good Iisdpfsz Azbfjx Ahneg Program: bSuite3 The Biesse Brema EKO 2.1 is a compact and versatile CNC machine that enables the processing of parts of various thicknesses and sizes while taking up less space. It is an ideal solution for "just-in-time" production for craftsmen, small businesses, and for the production of special parts in large companies. Panel dimensions: Panel length (X): 200 – 2600 mm, Panel width (Y): 35 – 900 mm, Panel thickness (Z): 8 – 60 mm, Maximum panel weight: 50 kg. BH17 self-selecting drilling unit with 14 vertical spindles + 8 horizontal spindles + 1 120 mm diameter grooving saw, 5.5 kW (6 HP) electrospindle with ISO30 mounting, Foot pedal for opening/closing the clamp Extensions for loading and unloading the table.

Condition: excellent (used), functionality: fully functional, working width 230mm working height 160mm 5 spindles spindles set: bottom/right/left/top/bottom Isdpoz Dn T Isfx Ahneig spindles diameter 40mm (last one 50mm) manual jointer on last head rolls in the table electric regulation of top head variable regulated feeder to 36m/min chrome table pneumatic pressure of feeding rolls

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, controller model: WinMax, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 762 mm Travel range, Y-axis: 508 mm Travel range, Z-axis: 610 mm Spindle speed: 12,000 rpm Table area: 1,020 × 510 mm Iijdpfjz Ahx Dsx Ahnsg Table load capacity: 1,500 kg MACHINE DETAILS Control system: WinMax EQUIPMENT Internal cooling system (ICS) Fourth axis