Second-hand machinery for sale (2,00,000)

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. Godpfx Asz Ai Tpekaeug This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00546, load capacity: 280 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-900iB/280 manufactured in 2015.08. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Guedpfx Akjz Ank Teasg Model: M-900iB/280 Model Number: A05B-1335-B205 Year of Manufacture Robot: 2015.08 Warranty term (months): 12   Payload (kg): 280 Reach (mm): 2655 Repeatability (mm): ± 0.1 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1700   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2015.07 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X386F11178, Year of construction: 2015, operating hours: 5,843 h, load capacity: 1,600 kg, lifting height: 5,925 mm, free lift: 2,019 mm, fuel type: electric, mast type: triplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 5,925 mm Free lift: 2,019 mm Overall height: 2,621 mm MACHINE DETAILS Mast type: Triplex ISO class: 2 Drive type: Electric Godpfx Akjzy U Sfsaeug Battery voltage: 48 V Battery year of manufacture: 2017 Operating hours: 5,843 h EQUIPMENT Side shifter External reference: SL12671

Condition: used, Year of construction: 1962, serial number 813 stroke 160 mm Guedpoz Alc Hjfx Akaog automatic feeds ja cross-moving table 2-Achsen weight of the machine ca. 1,2 t

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1.917.295, working width: 1,600 mm, passage height: 100 mm, overall weight: 500 kg, Equipment: CE marking, TECHNICAL DETAILS Minimum working width: 400 mm Maximum working width: 1,600 mm Maximum passage height: 100 mm MACHINE DETAILS Voltage: 400 V Current consumption: 16 A Fuse rating: 20 A Power: 5.2 kW Dimensions & Weight Dimensions (L x W x H): 2,800 x 800 x 1,600 mm Guedszxcdyspfx Akajg Weight: 500 kg Transport packages: 1 EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (max.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum bar capacity: 32 mm Maximum bar feed: 125 mm Maximum turning length: 80 mm Maximum drilling depth: 80 mm Spindle speed for turning: 200–3,150 rpm Spindle speed for right-hand thread cutting: 11.2–1,575 rpm MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Required space: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Gedpfx Ajz Agz Djkaeug Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Tool holders Additional accessories

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: R-00580, load capacity: 20 kg, arm reach: 1,811 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-20iA manufactured in 2013.05. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iA Model Number: A05B-1222-B202 Year of Manufacture Robot: 2013.05 Warranty term (months): 12   Guedpfx Ajz Anlkskasg Payload (kg): 20 Reach (mm): 1811 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 250   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2013.05 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: HHKHHU03EE0000073K, Year of construction: 2014, operating hours: 5,581 h, load capacity: 3,000 kg, lifting height: 4,685 mm, free lift: 1,430 mm, fuel type: electric, mast type: triplex, TECHNICAL DETAILS Lifting height: 4,685 mm Free lift: 1,430 mm Clearance height: 2,200 mm Lifting capacity: 3,000 kg Fork length: 1,070 mm Minimum fork width: 250 mm Maximum fork width: 1,075 mm MACHINE DETAILS Mast type: Triplex Drive type: Electric Battery manufacturer: Hawker Battery type: 80 V 5 PZS 775 Battery year of manufacture: 2014 Battery voltage: 80 V Battery capacity: 775 Ah Battery tray length: 1,025 mm Battery tray width: 850 mm Battery tray height: 790 mm Number of wheels: 4 Dimensions & Weight Dimensions (L x W x H): 2,450 x 1,190 x 2,200 mm Unladen weight: 4,900 kg Operating hours: 5,581 h EQUIPMENT Documentation CE marking Side shift Godozxcicjpfx Akaoug Work lights Non-marking tires

Condition: refurbished (used), Year of construction: 2014, machine/vehicle number: R-00529, load capacity: 70 kg, arm reach: 2,050 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-710iC/70 manufactured in 2014.04. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/70 Model Number: A05B-1125-B202 Year of Manufacture Robot: 2014.04 Warranty term (months): 12   Payload (kg): 70 Reach (mm): 2050 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2014.04 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Godpfsz Anldsx Akaoug Teach Pendant Cable Length (m): 12

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 750 mm, controller model: FANUC 0i-TC, Equipment: bar feeder, TECHNICAL DETAILS Travel range, X-axis: 300 mm Travel range, Z-axis: 750 mm Rapid traverse rate, X-axis: 20 m/min Rapid traverse rate, Z-axis: 24 m/min Spindle speed max.: 3,500 rpm Bar diameter: 75 mm Spindle motor power: approx. 15 / 18.5 kW Tool turret stations: 12 MACHINE DETAILS Control system: FANUC 0i-TC Number of axes: 2 Dimensions & Weight Dimensions (L x W x H): approx. 3,300 × 1,800 × 1,800 mm Machine weight: approx. 5,500 kg Bar feeder FEDEK DH-65L Bar length: approx. 1,500 mm Bar diameter: approx. 5–65 mm EQUIPMENT Gusdpfxszwghms Akaeg Tailstock FEDEK DH-65L bar feeder Bar feeder interface

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: AA1/015315, functionality: fully functional, planing width: 240 mm, number of spindles: 8, working height: 140 mm, TECHNICAL DETAILS Guodpfx Akozxcfdeaeg Max. planing width: 240 mm Max. planing height: 140 mm Infeed table length: 2,500 mm Feed drive: Cardan drive Lubrication system: Automatic Diameter of planing shaft: 40 mm Spindles Number of spindles: 8 pcs. Spindle 1 Spindle type: Bottom Tool available: Yes Spindle 2 Spindle type: Right Tool available: Yes Spindle 3 Spindle type: Left Motor power: 15 kW Tool available: Yes Spindle 4 Spindle type: Right Motor power: 11 kW Tool available: Yes Spindle 5 Spindle type: Left Motor power: 11 kW Tool available: Yes Spindle 6 Spindle type: Top Motor power: 15 kW Tool available: Yes Spindle 7 Spindle type: Top Motor power: 11 kW Tool available: Yes Spindle 8 Spindle type: Bottom Motor power: 11 kW Tool available: Yes Feed system Manufacturer: H&M Max. infeed length: 250 mm Discharge system Manufacturer: H&M Max. discharge length: 760 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 20,000 x 2,400 x 2,200 mm Unladen weight: 6,000 kg Number of transport packages: 8 pcs. EQUIPMENT Tools for all 8 spindles Automatic lubrication system Electrical wiring diagrams Technical data Documentation CE marking

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: R-00464, load capacity: 20 kg, arm reach: 3,110 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-710iC/20L manufactured in 2010.05. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/20L Model Number: A05B-1125-B205 Year of Manufacture Robot: 2010.05 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 3110 Repeatability (mm): ± 0.11 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 540   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2010.04 RCC Length (m): 7 Godpfxjz Ankyo Akasug   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516345H00091, Year of construction: 2017, operating hours: 7,098 h, load capacity: 2,500 kg, lifting height: 6,190 mm, free lift: 2,030 mm, fork length: 1,150 mm, empty load weight: 4,792 kg, TECHNICAL DETAILS Lifting height: 6,190 mm Free lift: 2,030 mm Clearance height: 2,775 mm Lifting capacity: 2,500 kg Fork length: 1,150 mm Minimum fork width: 240 mm Maximum fork width: 1,040 mm MACHINE DETAILS Mast type: Triplex Drive type: Electric Battery brand / battery type: STILL 80 V PzS 560 Battery year of manufacture: 2017 Battery voltage: 80 V Battery capacity: 560 Ah Battery tray length: 1,025 mm Battery tray width: 710 mm Battery tray height: 785 mm Dimensions & Weight Dimensions (L x W x H): 2,300 x 1,290 x 2,770 mm Unladen weight: 4,792 kg Operating hours: 7,098 h EQUIPMENT Gjdpezxcfwjfx Akaoug Joystick Non-marking tires Work lights Partial cabin Documentation CE marking Additional hydraulics: 3rd and 4th valve for fork carriage

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X39V02365, Year of construction: 2019, operating hours: 9,495 h, load capacity: 2,500 kg, lifting height: 4,015 mm, free lift: 1,874 mm, mast type: duplex, construction height: 2,640 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 4,015 mm Free lift: 1,874 mm Overall height: 2,640 mm MACHINE DETAILS Mast type: Duplex Fuel type: Gas ISO class: 2 (1,000–2,500 kg) Operating hours: 9,495 h EQUIPMENT 360° camera Side shifter 3rd hydraulic valve Heater Guodpfjzy U N Rex Akaog Full cabin Air conditioning External reference: SL12885SP

Condition: ready for operation (used), Year of construction: 2007, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 28 t Bending length: 835 mm Travel range of the back gauge: 0 – 370 mm Stroke: 200 mm Distance between frames: 890 mm Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Press travel: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Safety device Mechanical tool clamping (top) Guedpfozzkwgex Akasg The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. If in doubt, please compare the information with the photos provided or inspect the goods on-site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 56.604, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Supply voltage: 400 V AC Rated current: 29 A Number of phases: 3 Power: 17.1 kW Frequency: 50 Hz Short-circuit interrupting capacity: 10 kA RMS symmetrical EQUIPMENT Drilling tool Saw unit Guodjzzbcyepfx Akaog Vacuum pump Tools

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, empty load weight: 1,720 kg, operating speed: 10,700 mm/s, roller width: 2,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rigid material Workpiece height: max. 50.8 mm Workpiece weight: max. 34 kg/m² Roller material Width: min. 900 mm – max. 2,200 mm Weight: max. 50 kg Diameter: max. 240 mm Maximum printing speed: 64.2 m²/h (in express mode) MACHINE DETAILS Dimensions & weight Dimensions: 3,080 × 2,500 mm Weight: 1,720 kg Gujdpfx Akjzxgnvjasg EQUIPMENT RIP (see images) Note: The machine heads need to be replaced. The seller can offer a complete service for this.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 537, workpiece width (max.): 1,440 mm, workpiece height (max.): 1,500 mm, Equipment: CE marking, TECHNICAL DETAILS Max. workpiece width: 1,440 mm Max. workpiece height: 1,500 mm MACHINE DETAILS Guedpezxchxefx Akaeg Voltage: 400 V Current consumption: 15.5 A Fuse rating: 16 A Main motor power: 8.0 kW Power: 8.0 kW Dimensions & Weight Dimensions (L x W x H): 2,900 x 1,500 x 1,850 mm Machine weight: 300 kg Shipping packages: 1 unit EQUIPMENT CE marking

Condition: used, Year of construction: 2015, machine/vehicle number: 315031/02, working width: 1,800 mm, workpiece length (max.): 3,000 mm, workpiece height (max.): 25 mm, TECHNICAL DETAILS Workpiece dimensions Maximum length: 3,000 mm Minimum length: 400 mm Maximum width: 1,800 mm Minimum width: 200 mm Maximum thickness: 25 mm Minimum thickness: 3 mm Maximum deflection: 1 mm Maximum paper roll diameter: 500 mm Paper web width: 1,980 mm Maximum working width: 1,800 mm MACHINE DETAILS Minimum temperature: -5 °C Operating speed: 0.8–2 m/min Godpfxezypm Do Akaoug Voltage: 400 V Frequency: 50 Hz Pressure: max. 6 bar EQUIPMENT Roller conveyor TVR18/2000 Working width: 1,800 mm Speed: 0.35–6.1 m/min Roller diameter: 66 mm Roller spacing: 125 mm

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! This machine is sold complete with collets, tool holders, and additional accessories. For more Schütte multi-spindle lathes available from the same site, please see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard bar feed up to: 125 mm Special bar feed up to: 290 mm Standard longitudinal slide travel, total: 100 mm Standard longitudinal slide travel, working travel: 80 mm Special longitudinal slide travel, total: 145 mm Special longitudinal slide travel, working travel: 115 mm Upper cross slide travel, total: 50 mm Upper cross slide travel, working travel: 33 mm Middle cross slide travel, total: 50 mm Middle cross slide travel, working travel: 30 mm Lower cross slide travel, total: 60 mm Lower cross slide travel, working travel: 37.5 mm Godoz Ag Abopfx Akajug Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: Submersible electric pump Pump output: 180 l/min EQUIPMENT High-speed drilling unit Gripper unit Reaming unit Independent auxiliary longitudinal control Powered cross slide adjustment Collets Tool holders Additional accessories

Condition: like new (used), functionality: fully functional, Year of construction: 2023, workpiece length (max.): 4,200 mm, workpiece width (max.): 1,200 mm, workpiece height (max.): 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS DIMENSIONS OF LOG PACKAGES Log packages to be cut, maximum length: 4,200 mm Log packages to be cut, minimum length: 2,500 mm Log packages to be cut, maximum width: 1,200 mm Log packages to be cut, maximum height: 1,200 mm Log packages after cutting, maximum length: 4,000 mm Log packages after cutting, minimum length: 700 mm Remaining cuts (waste), maximum length: 300 mm MACHINE DETAILS MACHINE DATA Gusdpfxjzwt T Ao Akaeg Machine type: ES 121 SHK 4 m Year of manufacture: 2023 Operating voltage: 400 V Mains frequency: 50 Hz EQUIPMENT Saw chain, article number 10004788, length 1,900 mm Guide rail, article number 11003322, length 1,900 mm Operating manual, article number 50002270

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, No minimum price – guaranteed sale to the highest bidder! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced and maintained by Trumpf, with a complete service record. The cylinders are leak-proof and have no oil loss. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Gusdpfxezzkvcj Akasg Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam running time: 15,396 h Hydraulic system running time: 83,212 h Machine operating hours: 152,638 h EQUIPMENT CE marking Documentation/Manual Rear stop with sensors CNC crowning Bendmaster (robot with 8 m travel) Vacuum manipulators CNC gripping station Double sheet detection BendGuard laser safety device Spare parts: Cable carrier, spare vacuum plate, BWF fixators (machine feet) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If collection is not completed within the specified timeframe, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on-site before the end of the auction.

Condition: used, Year of construction: 1999, machine/vehicle number: 17, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled, but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a vertical internal stripping machine manufactured by FORST, model: RISH 6.3 x 1000xx 320 M. TECHNICAL DETAILS Operating voltage: 400 V Phases: 3 Frequency: 50 Hz Control voltage: 230/240 V AC Control frequency: 50 Hz Gjdpfx Aozy Ulrjkaeug Control current: 6.3 A Machine rated current: 180 A

Condition: used, functionality: fully functional, Year of construction: 1986, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 260 mm, roller (top) diameter: 270 mm, side roll diameter: 260 mm, sheet thickness (max.): 16 mm, overall weight: 7,500 kg, total length: 4,040 mm, total width: 1,590 mm, total height: 2,095 mm, power: 11 kW (14.96 HP), Equipment: swiveling upper roller, Technical specifications: max. thickness of pre-bent rolled sheet: 16 mm, max. thickness of non-pre-bent rolled sheet: 12 mm, minimum rolling radius: 240 mm, maximum sheet width: 2000 mm. The machine is a three-roll machine – with an upper roll with a diameter of 270 mm and two lower rolls with a diameter of 260 mm, working speed for bending: 7.5 m/min, main motor power: 11 kW, total installed power: 18.1 kW, overall dimensions (L x W x H): 4040 x 1590 x 2095 mm, the weight of the sheet rolling machine is approximately 7,500 kg. The machine is currently disassembled in our warehouse in Přerov, where it can be tested if desired. Gjdjz Alf Ujpfx Akajug

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 570602, travel distance X-axis: 300 mm, travel distance Y-axis: 400 mm, controller model: Siemens Sinumerik 840 C, swivel angle A-axis (min.): -170 °, swivel angle A-axis (max.): 170 °, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 300 mm Travel range, Y-axis: 400 mm A-axis: -170° to +170° X-axis speed: 0.1–5,000 mm/s Y-axis speed: 0.1–5,000 mm/s Workpiece diameter with 1:10 reduction ratio: 300 mm Workpiece diameter with 1:1 reduction ratio: 212 mm Maximum number of teeth: 200 Minimum number of teeth: 6 MACHINE DETAILS Control system: Siemens Sinumerik 840 C Total power requirement: 38 kW Gjdpfx Akozwmx Esasug Dimensions & Weight Space requirement: approx. 4,200 × 2,200 × 2,100 mm Machine weight: approx. 10,000 kg