Used Cesta Usata Seminuova In Ferro for sale (14,041)

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 Codpfx Asr Ix Igof Ashc All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal

Condition: used, mileage: 29,065 km, power: 88 kW (119.65 HP), first registration: 06/1976, fuel type: diesel, tire size: 12/50 R20, axle configuration: 4x4, wheelbase: 3,500 mm, fuel: diesel, color: red, driver cabin: day cab, gearing type: mechanical, number of gears: 6, Year of construction: 1976, Equipment: power assisted steering, trailer coupling, = Additional options and accessories = - Tachometer = Further information = Technical information Number of cylinders: 6 Engine displacement: 5,675 cc Front tyre size: 12/50 R20 Weights Unladen weight: 4,423 kg Payload: 2,327 kg Gross vehicle weight: 6,750 kg Codpovcqbrefx Af Ajhc Interior Interior colour: black Environment Emission class: Euro 0 Maintenance, history and condition APK (Main technical inspection): New TÜV upon delivery Number of keys: 2

Condition: used, mileage: 3,64,980 km, power: 375 kW (509.86 HP), first registration: 08/2023, fuel type: diesel, overall weight: 18,000 kg, emission class: euro6, ADR with Crossbars - Rear Tire - Double Tank - Stationary Air Conditioning - LED Headlights - Tires: 315/80 Chedpoz Iugpefx Af Aoc For more information

Condition: used, functionality: fully functional, machine/vehicle number: ...630, empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 01/2022, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR Cedpjy Ihu Sjfx Af Ajhc STEEL FLOOR! ===== 4 units available! ===== Brand: SCHWARZMÜLLER Type: J-Series S1 First registration: 01/2022 Unladen weight: 8,760 kg Payload: 25,240 kg Gross vehicle weight: 34,000 kg Technical max. total weight: 39,000 kg - Robust, wear-resistant L-shaped steel floor profiles -- STEEL FLOOR -- Aluminium chassis -- Volume: approx. 92 m³ -- Reinforced walls, continuous aluminium wear plates on the interior sides -- Aluminium body -- Portal doors -- ABS/EBS -- SAF axles -- Lift axle -- Disc brakes -- Air suspension -- Sliding tarpaulin -- Load protection slat -- Standing platform at the front wall -- Lifting and lowering device -- Radio remote control -- Toolbox -- Underrun protection -- Spare wheel holder -- Tyres: 385/65 R22.5 (tread approx. 70% / 80% / 90%) -- etc. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We handle all customs procedures for you. Want to trade in your used vehicle? ...If we reach an agreement, we are happy to accept it in part exchange. This offer is non-binding and subject to prior sale. Errors and interim sale reserved.

Condition: used, functionality: fully functional, machine/vehicle number: ...634, empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 01/2022, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! ===== 4 units available! ===== Brand: SCHWARZMÜLLER Type: J-Series S1 First registration: 01/2022 Unladen weight: 8,760 kg Payload: 25,240 kg Gross vehicle weight: 34,000 kg Technical max. total weight: 39,000 kg - Robust, wear-resistant L-shaped steel floor profiles -- STEEL FLOOR -- Aluminium chassis -- Volume: approx. 92 m³ -- Reinforced walls, continuous aluminium wear plates on the interior sides -- Aluminium body -- Portal doors -- ABS/EBS -- SAF axles -- Lift axle Csdoy Ih A Nepfx Af Aohc -- Disc brakes -- Air suspension -- Sliding tarpaulin -- Load protection slat -- Standing platform at the front wall -- Lifting and lowering device -- Radio remote control -- Toolbox -- Underrun protection -- Spare wheel holder -- Tyres: 385/65 R22.5 (tread approx. 70% / 80% / 90%) -- etc. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We handle all customs procedures for you. Want to trade in your used vehicle? ...If we reach an agreement, we are happy to accept it in part exchange. This offer is non-binding and subject to prior sale. Errors and interim sale reserved.

Condition: used, Year of construction: 2026, color: grey-black, empty load weight: 6 kg, first registration: 07/2026, fuel type: gasoline, gearing type: mechanical, TITLE: USED STAINLESS STEEL TANK WITH INSULATION, SINGLE COMPARTMENT, FORMERLY USED AS A MILK CONTAINER REF: 26-U-89 TYPE: Stainless steel tank DIMENSIONS OVERALL TANK LENGTH: 3.70 m TANK LENGTH: 3.00 m OVERALL TANK WIDTH: 2.10 m TANK HEIGHT: 1.55 m TOTAL TANK VOLUME: 7,000 liters WEIGHT: 1390 kg COLOR: Steel Subject to errors and/or omissions The prices shown do not include VAT. Please contact the sales department for an updated price and condition comparison. Cjdpfx Afjzlu Ttj Aohc For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of sales and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. Specializing in trucks, trailers, and demountable equipment. With a readily available fleet of over 50 trucks and over 150 bodies, containers with and without demountable cranes. S.E.&O Given the quantity of advertisements and details provided, Aurora encourages you to verify the accuracy of the data with the sales staff.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Cooling system for recovering waste heat from machines Includes 6 heating fans. Details available upon request. Chsdpjzyc Diofx Af Aoc

Condition: used, Year of construction: 2016, Bystronic BySprint Fiber 3015 + ByTrans 3015 Extended – Laser cutting machine with loading and unloading system Working area: 3000 x 1500 mm Laser power: 4000 W Cjdpfx Afoz Itl Dj Ashc - ByTrans 3015 loading and unloading system - ByVision CNC control with touchscreen - Handheld control unit - Fiber 4000 laser source - Cutting parameter assistant - Automatic nozzle cleaning - Automatic nozzle changer with 40 positions - Operator protection in the cutting area and loading/unloading area - Extraction system - Extraction device for sheet separation - Compressed air connection - Year of manufacture: 2016 Included packages: - Material specification package - Package for part tolerances & cutting surface quality - Package for cutting gas supply & cutting quality

Year of construction: 2014, condition: excellent (used), 328 USED MIWE Roll In 60/80 rotary cart oven. Year of manufacture: 2014. EXTERNAL DIMENSIONS (in cm): Chodpfxeyqnq Dj Af Asc - W: 155, - D: 160 (with hood: 230) - H: 257. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: VD 07.08.469, type of input current: DC, We are selling our Kallfass shrink tunnel. The display is defective, but the rest of the machine is fully functional. Chodpfx Asy Snw Iof Aec Feel free to call if you have any questions.

Condition: good (used), Year of construction: 2012, operating hours: 43,313 h, controller model: Siemens Sinumerik 840 D, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 5,000 watts Working area: 3,000 × 1,500 × 115 mm Max. sheet thickness, steel: 25 mm Max. sheet thickness, stainless steel: 20 mm Max. sheet thickness, aluminum: 20 mm Max. speed: 235 m/min Accuracy: 0.10 mm MACHINE DETAILS Control model: Siemens Sinumerik 840 D Operating hours: 66,934 h / 43,313 h Dimensions & weight Dimensions (L x W x H): 8,300 x 4,800 x 2,400 mm Weight: 12,000 kg EQUIPMENT Solid-state laser TruDisk 3001 with one LLK output Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Universal cutting head with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection Chsdpfez D Evajx Af Aec

Condition: reconditioned (used), Year of construction: 2008, Miwe Roll-in rotary oven - used - year of manufacture 2008 - for sheet metal 60 x 80 - DS electronic control system - after overhaul Cedpfx Afszxdg As Aehc - new burner - hood with fan - warranty - collection from warehouse / shipping option available - price on request

Condition: used, Year of construction: 2010, controller model: PC85, working width: 1,750 mm, milling spindle speed (max.): 24,000 rpm, working length: 6,000 mm, TECHNICAL DETAILS Machining method: Drilling and milling Number of work areas: 2 Work area X-axis: 6,000 mm Work area Y-axis: 1,750 mm Number of controlled axes: 5 Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Table system: Console work table with vacuum cups Number of vacuum consoles: 10 CNC positioning: Yes Vacuum cups for workpiece clamping: Yes Number of vacuum cups: 40 Drilling unit Number of drilling units: 1 Position of drilling unit: Top Vertical drilling spindles: 20 Horizontal drilling spindles, X-direction: 5 Horizontal drilling spindles, Y-direction: 5 Total drilling spindles: 30 Milling unit Number of milling units: 1 Codpfjz Ekb Dsx Af Aehc Position of milling unit: Top Controlled axes: 5 Motor power: 12 kW Speed: 24,000 rpm Liquid cooling: Yes Automatic tool changer: Yes Number of tool magazines: 1 Tool positions: 72 MACHINE DETAILS Control: PC85 Programming software: WoodWOP 5.0 Vacuum pumps: 2 Individual output per vacuum pump: 250 m³/h Total connected power: 49 kW EQUIPMENT Console work table with vacuum cups 10 vacuum consoles with CNC positioning 40 vacuum cups for workpiece clamping 2 vacuum pumps Top drilling unit with 30 drilling spindles Top 5-axis milling unit with 12 kW electric motor spindle Liquid cooling Automatic tool changer Tool magazine with 72 tool positions PC85 control WoodWOP 5.0 programming software Automatic chip extraction Safety mats on the front of the machine Safety sensors Fixed safety guards CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8167

Condition: good (used), functionality: fully functional, empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2022, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Year of construction: 2022, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! 4 units available! Brand: SCHWARZMÜLLER Model: J-Series S1 First registration: 03.2022 Unladen weight: 8,760 kg Payload: 25,240 kg Gross weight: 34,000 kg Technically permissible total weight: 39,000 kg - Robust and wear-resistant L-shaped steel floor profiles - STEEL FLOOR - ALUMINIUM chassis - Volume: approx. 92 m³ - Reinforced walls, continuous aluminium wear plates along the interior sides - Aluminium body - Portal doors - ABS/EBS Chjdpjym En Sofx Af Asc - SAF axles - Lift axle - Disc brakes - Air suspension - Sliding roof tarpaulin - Standing platform at front wall - Hydraulic lifting and lowering system - Radio remote control - Toolbox - Underrun protection - Spare wheel holder - Tyres: 385/65 R22.5; tread approx. 70% / 80% / 90% - etc. Would you like to visit us? We offer a free pick-up service from Linz train station (4020 Linz). We handle all customs formalities for you. Want to trade in your current vehicle? If we reach an agreement, we are happy to accept your trade-in. This offer is non-binding and subject to prior sale. Errors and interim sale excepted.

Condition: ready for operation (used), functionality: fully functional, suction capacity: 20,000 m³/h, production capacity: 1,300 unit/h, No minimum price – guaranteed sale to the highest bidder! The hammer mill (year of manufacture 2021) has only approximately 2 operating hours! The system is suitable for straw, hay, alfalfa, compost, wood, and other agricultural raw materials! Csdpfx Afsz Ar D Rs Aehc TECHNICAL DETAILS Capacity (material-dependent) max.: 1,300 kg/h MACHINE DETAILS Hammer mill power: 75 kW Pellet press: 75 kW, without control unit Bale shredder: 35 kW, including control unit Dust filter capacity: 20,000 m³/h, including control unit Operating hours Entire line: approx. 1,500 h Hammer mill: approx. 2 h EQUIPMENT Pellet press Conveyor belt Elevator Pellet cooler with screen Buffer tank with discharge 2 cyclones with rotary valve airlock Fan for cooler extraction New die Various used spare parts 10 m feed table for the bale shredder Bale shredder, including control unit Hammer mill, including control unit Centrifugal separator Big bag station for dust filter Dust separation technology: EU-ATEX Directive 2014/34 Positive dust explosion assessment from 2023 Note: The line has already been dismantled and is ready for loading.

Condition: good (used), Year of construction: 2020, functionality: unexamined, type of input current: three-phase, total width: 970 mm, total length: 2,530 mm, total height: 2,190 mm, overall weight: 850 kg, compressed air connection: 12 bar, Designed for bulk products and powders, it features a dosing head for bulk materials. It has a screw-type filling conveyor. It doses into doypack packaging with dimensions of 190 mm x 230 mm. The equipment was purchased but never put into operation; the project was discontinued. Cedpfx Afoy U Twrj Aohc

Condition: used, Year of construction: 1990, Type/Designation: 307-153/714-750 Serial Number: 82/293 Country of Manufacture: Made in West Germany (before 1990) Technical Data (approximate, for this type of CHIRON machine from the 1970s/80s): Machine Type: Column drill / single-station drilling machine for metal Motor Power: typically from 1.5 kW to 3 kW (three-phase, 380 V) Spindle Speeds: 100 – 4000 rpm (mechanically or electrically switched) Max. Drilling Diameter in Steel: approx. 20–25 mm (depending on the version) Csdpfxow T U Ubo Af Aohc Spindle Taper: usually MT2 or MT3 Feed: manual or mechanical (some models equipped with automatic feed) Weight: several hundred kilograms (approx. 300–600 kg) Intended Use: serial production in industry (precise hole drilling, light milling operations in metals, use in production lines) Machine Table: cast iron, capable of securing workpieces Full control panel – variable speed adjustment available 2. Key Working Head Parameters (important for riveting): Press Force (kN) – if specified on the cylinder label or in the electrical box (often 10–30 kN for this size) Spindle/Slide Stroke (mm) – measure from top to bottom position Daylight (working clearance: distance between tool tip and table at top position) Throat Depth – from spindle axis to column (working reach) Max. Rivet Diameter / Work Range – specify based on tests or prior use Voltage: usually 380/400 V, 50 Hz 3. Dimensions and Logistics: L×W×H (of base/overall, in cm) Electrical Supply: 3×400 V, protection e.g. C16–C20 (indicate according to power rating) Weight (weigh with pallet jack with scale or estimate)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, WeldingDroid X2 Portable Model - For pipes and tank welding Ø 60 mm to 1.000 mm - Roller distance: 5 m (pipes could be longer) - Round welding - GTAW/ GMAW - AVC - Oscillation - Gaswalves: Purge & Trail - Coldwire+Hotwire - WLL max 2t - Remote Controller for programing Cedpfx Afjwku Tye Aohc - Control all parameters - Joystick for controlling (during weld) - Easy to program - Price contains one PurgeMaster - Welding machine (Kemppi MasterTig & Kemppi MasterM) optional, not included

Condition: new, power: 132 kW (179.47 HP), fuel type: diesel, color: white, gearing type: automatic, number of seats: 18, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Opel Movano coach/school bus (identical to Fiat Ducato) / coach, several vehicles available immediately Stock vehicle / warehouse vehicle, immediately available Different equipment lines Conversion as follows: - Acoustic and thermal insulation from the passenger compartment - Tinted glass (grey/black) in the original opening - 16 reclining seats plus a single passenger seat + driver's seat = 18 total, also available with a double passenger seat, then a total of 19 - (Of course, the vehicle can also be configured with 16 seats for driver's license D 1) - Optionally, a passenger seat or a small table can be mounted next to the driver's seat. - Convector heater in the passenger compartment Chsdpfjz Ii Hdsx Af Aec - Air conditioning in the passenger compartment, optionally with a second compressor - Multi-level night lighting (white/orange) - Roof hatch - Electric drive for the original sliding door - Electric step at the original sliding door - On request, also possible with an electric exterior swing door - Reinforced rear axle Optional: On request, available as a Fiat Ducato, Citroen Jumper, Peugeot Boxer, or Opel Movano. Various equipment lines in stock. - Electric middle door + EUR 2,000.00 - Double-width middle door + EUR 3,000.00 (loss of 1 seat) - 5 standing places - Automatic transmission - 180 hp Base vehicle with air conditioning, manual transmission, parking assist system with reversing camera, radio with hands-free system, multi-function steering wheel, etc. Wheelbase 4035 mm Overall length 6223 mm Height 2522 mm Width 2050 mm Permissible total weight 4500 kg !! Special equipment: Airbag driver/passenger side, Cool & Sound package, electric interface for additional conversions, driver assistance system: ParkPilot system with reversing camera, lighting package 1, tire repair kit, seats in the cab: adjustable single passenger seat, seats in the cab: heated driver's seat Additional equipment: Exterior mirrors, single tires on 2nd axle / rear axle, driver assistance system: side wind assist, generator 185 A, rear wing doors with tinted glass (opening angle 180 degrees), high roof H2, permissible total weight 4.25 t, body/structure: box high-roof, body variant: vehicle length L4, body variant: high roof (H2), fuel tank: 80 liters, adjustable steering column (steering wheel), headlight range control, model upgrade, engine 2.3 liters - 103 kW CDTI, pollen filter, long wheelbase, low emission according to emission standard Euro 6e-TEMP, sliding door loading/passenger compartment right, side marker lights, visibility package, steel rims 6.5x16, daytime running lights LED, permissible total weight 4.25 t, speed limitation 90 km/h Net export possible All information without guarantee These are German vehicles / no re-imports. On request, also available as a Citroen/Peugeot/Fiat Ducato or Opel Movano. We make shipments worldwide.

Condition: excellent (used), Year of construction: 2002, Miwe Roll-in rotary furnace - used - year of manufacture 2002 - for sheet metal 60 x 80 Codpfx Afjzvw Rio Aehc - CS computer control system - new burner - 1 trolley - excellent technical condition - warranty - collection from the warehouse - price on request

Condition: good (used), Zip Wire closed spiral in spools 3 pallets of spirals, 12 whole new spirals + 12 started. In 3:1 and 2:1 spacing. Cjdpfxsztn D Ue Af Aohc Sold only in whole.

Condition: good (used), functionality: fully functional, Year of construction: 2001, working width: 1,650 mm, overall weight: 8,000 kg, rear tire size: 15/55-17, 48 cubic meters, 6 rakes, hydraulic drawbar, 7 blades. Chedpfx Aszrzd Sof Asc

Condition: good (used), Year of construction: 2018, functionality: fully functional, total width: 3,642 mm, total length: 3,334 mm, input voltage: 400 V, feed length X-axis: 2,900 mm, feed length Y-axis: 2,600 mm, working width: 2,600 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, cutting width (max.): 2,540 mm, cutting height (max.): 20 mm, compressed air connection: 9 bar, We are selling our Atom FlashCut Fashion 26B All-in-One fully automatic cutting table system. With a usable working area of 2,900 x 2,600 mm, a cutting window of 2,540 x 850 mm, and a separate unloading area of 1,200 x 2,600 mm, the FlashCut 26B offers ideal conditions for efficient workflows. The maximum cutting height of 20 mm allows for processing a wide range of materials – including multilayer applications. Two independently operating tool heads ensure high speed and maximum productivity. Servo drives on the X, Y, and Z axes guarantee precise movements with a travel speed of up to 80 m/min and an acceleration of 1G. Chedpfeymn R Njx Af Ajc Intelligent Material Handling & Vacuum Technology A continuous conveyor belt feeds the material into the processing zone. The vacuum table is divided into 300 x 300 mm segments, allowing targeted activation of individual areas. This ensures precise material fixing while minimizing energy consumption. Two high-performance vacuum pumps with frequency control (3–15 kW) automatically adjust their output to actual requirements. The result: secure material fixing with energy-efficient operation. Precision through Camera and Projection Technology For maximum material utilization, the system is equipped with two cameras with integrated light sources and dimmers for detecting irregular material contours – for example, when processing leather hides. Flaws can be digitally marked and taken into account during further processing. Two high-performance projectors support automatic nesting by projecting cutting contours directly onto the material. In addition, item numbers, sizes, or other markings can be projected onto the cut parts – ideal for process reliability and traceability. Powerful CNC Control & Software The system features a modern CNC control unit, including TFT color display, keyboard, and USB interface. An integrated computer with Windows Embedded, Ethernet connectivity, and TeamViewer support enables easy operation and remote maintenance. The software package includes: - DXF converter for reading and converting CAD files - Interactive layout software - Automatic nesting software - CAD module for creating simple geometries Optionally, the Luxury Nest Strategy adds a specially developed nesting logic for optimizing leather cutting. It takes into account quality zones, defect areas, and defined rotation and grouping rules to ensure maximum material yield. Versatile Tool Equipment The FlashCut 26B comes with a multi-tool head. Standard tools include: - Drag knife - Punch tools (various diameters) - Marking tool - Tracing needle - Laser pointer - Knife holder and ejector This makes the system flexible for cutting, marking, and perforating tasks. Safety & Reliability A safety system with light barriers and emergency stop button ensures maximum operational safety. The machine is CE-compliant and designed for continuous industrial operation.

Condition: good (used), Schmedt PraKant Turning-in machine The PräKant is a turning-in machine designed to turn in and press down the edges during the production of book covers and other products. Weight: 150 kg Power supply: 400 V Chjdez Dtb Rjpfx Af Ajc Flexible speed control.

Condition: excellent (used), mileage: 16,757 km, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: red, gearing type: mechanical, suspension: steel, total length: 7,550 mm, total width: 2,600 mm, total height: 3,000 mm, Year of construction: 1991, = Additional Options and Accessories = - PTO = Notes = WATER TANK 2000 LTR WATER PUMP EVERYTHING WORKS TRUCK IS READY FOR WORK TRUCK IS LIKE NEW = Further Information = General Information Year of manufacture: 1991 Cab: double Technical Information Number of cylinders: 6 Axle Configuration Suspension: Leaf suspension Front axle: Steered Rear axle: Twin tires; planetary reduction axles Chsdpfx Afsy E Upke Ajc Weights Unladen weight: 7,460 kg Payload: 4,940 kg gross vehicle weight: 12,400 kg Condition Technical condition: very good Optical condition: very good Further information Contact Thierry Leemans for more information.