Used Ms 3198-1 for sale (79,704)

Condition: ready for operation (used), functionality: fully functional, The FlexWall®Plus FW40/5 is a dosing device for poorly to severely free-flowing bulk materials. It consists of the following assemblies: a trapezoidal stainless steel housing, a flexible polyurethane trough with a large cross-section, massage paddles, a dosing screw, a screw tube, a three-phase drive and a trapezoidal extension hopper with a volume of 50 dm³ or 70 dm³, with a low installation height. The shape of the trough and the external massage paddles with adjustable amplitude ensure a consistent screw fill level and gentle mass flow of the bulk material. Changing the screw on the FW40/5 is only done from the front. The FlexWall®Plus enables easy disassembly for wet or dry cleaning, with the polyurethane trough simply being pulled off the housing rim. Furthermore, the compact trapezoidal design allows space-saving arrangement of up to six dosing units around a central feeding point. Nedpewnr Trefx Ab Usdb

Condition: used, Year of construction: 2002, BIESSE Stream SB2 10.5 Double-Head Edge Bander. Nodpfx Aoz Dp Rueb Usdb

Year of construction: 2019, condition: ready for operation (used), overall weight: 1,500 kg, total height: 1,300 mm, This TFM GM-SB-38CNC-2A1S was manufactured in 2019. It features a max bending capacity of 38 × 2 mm, bending speeds up to 65 °/sec, and motor power of 4 kW. Ideal for precise bending with a max bending angle of 180° and effective length over mandrel of 3200 mm. Consider the opportunity to buy this TFM GM-SB-38CNC-2A1S profile bending machine. Contact us for more information. Machine Benefits Ndodpezvu Rajfx Ab Ueb Technical Machine Benefits • Max. Bending capacity: 38 × 2 mm • Min. Bending radius: 20 mm • Max. Bending radius: 200 mm • Max. Bending angle: 180° • Bending precision: ±0. 1° • Turning angle precision: ±0. 1° • Feeding precision: ±0. 1° • Effective length over mandrel: 3200 mm • Bending speed: 65 °/sec • Turning pipe speed: 180 °/sec Extra Information Feeding speed: 900 mm/sec Motor power of oil system: 4 kW Oil pump flow rate: 17 L/min Max. pressure: 160 kg/cm² Dimensions Machine Depth 4000 mm

Condition: used, Little used European Spraydry Technologies model 8 - 19 Tall Form Spray 304 stainless steel ATEX rated spray dryer system. Mass balance design capabilities approximately 246kgs feed @ 10% solids with 26kgs Powder @ 5% residual moisture + 220kg/h water evaporated based on Potato Proteins. Inlet temperature 190 deg.c. with exhaust temperature 90 deg.c. Mass flowrate of drying air rated 6,895kg/hr. System includes the following parts: (1) Airco model CHP inlet fan driven by 11kw motor. (1) Lanemark model DB07 propane burner with control panel. (1) Tall form spray dryer chamber with conical base fitted with dislodging hammers fitted to cylinder and cone. Access/inspection doors. Explosion suppression bottles. (1) Stainless steel feed lance with pressure nozzle. (1) 304 Stainless steel product cyclone with explosion suppression bottles. Includes DMN Westinghouse type AL250DairyMZC-11 APS rotary lock value with motor. (1) Exhaust air chamber with explosion suppression bottle. (1) Gough type GBS550 stainless steel vibratory sifter/screen, mounted on stainless steel mobile frame. (1) Feed balance stainless steel vertical vessel. (1) FBF Italia model FBF2004/P High pressure plunger pump. (1) Mettler Toledo type V4-REM industrial flow-though metal detector with Piab conveying system. (1) Airco type CHP825 exhaust fan driven by 30kw motor. (1) Robbe model Atlas filling machine for bags with controls. Various small scale circulation pumps, pipework, instrumentation and ducting available. Ndedpez D Efnjfx Ab Uob Specifications: Material Of Construction: 304 Stainless Steel Type Of Spray: Nozzle

Condition: used, Year of construction: 2015, CNC laser cutting system, fiber laser 3kW Manufacturer: Microstep Type: FIBERLAS MSF 4001.20BL Nsdjzhtp Eopfx Ab Usdb Year of manufacture: 2015 With drilling unit + tool changer Complete system consisting of: - Cutting system, - IPG fiber laser source, - HIGHYAG cutting head and - KEMPER extraction system. Laser IPG Ytterbium Laser System YLS-3000-CUT-Y14 Rated power: 3,000 W (3kW) Operating mode: CW / modulated Power consumption: approx. 9 kW max. (8.3 kW typical) at 3,000 W IPG air-water chiller for cooling Operating hours: approx. 26,819 h Dimensions: W/D/H: 1,004 x 804 x 556 mm Cutting head II-VI HIGHYAG BIMO-FSC Permissible laser power: up to 4 kW Focal length f: 150 mm (focusing module 1.5) Focus diameter: approx. 300 µm with 200 µm optical fiber Weight: approx. 6.2 kg Extraction system KEMPER SYSTEM 8000 Extraction capacity: 5,000 m³/h Filter area: 50 m² Filter: KEMPER KemTex ePTFE membrane filter Certification: IFA-tested, welding fume class W3 (high-alloy steels) Available from 10/2026 Reference No.: C2177 21926ä

Year of construction: 2005, condition: used, - max. 28 cycles/min for single stacks - max. 50 sheets/min when collecting sheets in the direction of travel, with several sheets arranged one behind the other - max. 50 sheets when collecting 2 sheets on top of each other (special version of the infeed belt conveyor) Used destacking unit Manufacturer: Meinert Type: AM 33 - 3000 /1300 Systems Year of manufacture: 2005 Technical data - max. 28 cycles/min for single stacks - max. 50 sheets/min when collecting sheets in the direction of travel, with several sheets arranged one behind the other - max. 50 sheets when collecting 2 sheets on top of each other (special version of the infeed belt conveyor) Design - Infeed belt conveyor in front of the system (special version: pneumatically adjustable for collecting 2 parts on top of each other) - Infeed belt conveyor in the paternoster - 2 paternoster walls – fixed side and motor-adjustable loose side - Synchronized stop adjustment – infeed and stacking positions AM 33: 2 stacking positions on one lifting device with powered roller conveyor - Personnel protection consisting of safety grilles and automatic sliding gates - Control cabinet according to VDE regulations - PC control in a separate PC cabinet Nedpfx Abjzuz N Te Ujdb Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, SMW Steady Rest Type SLU-X1-ms including mounting bracket for CNC lathe DMG Mori CTX 500 Condition: Used Ndodpfx Absyx U H Ae Ueb Features: Housing: fully sealed Safety: integrated safety valve Stroke control: prepared for end position monitoring Lubrication: connection for central lubrication (oil or grease) Technical Data Centering range (without chip guard): Ø 4 - 64 mm Centering range (with 3-piece chip guard): Ø 11 - 64 mm Operating pressure (min./max.): 8 / 35 bar Max. clamping force per roller: approx. 400 daN Centering accuracy: 0.02 mm (across the entire range) Repeatability: 0.005 mm Weight approx. 12 kg

Condition: like new (used), functionality: fully functional, machine/vehicle number: 28727, Diameter max: 6 mm Nodothgkqepfx Ab Uedb Length under head max: 30 mm Speed: 400 ppm

Year of construction: 2001, condition: like new (used), flader brushing machine CMC futura bold x 2 6 agergate WIDE UP AGGREGATE, WIDE DOWN AGGREGATE, LEFT AND RIGHT NARROW AGGREGATE X 4 brushing machine flader CMC futura bold x 2 6 agergate Ndjdpfxsi A Ivys Ab Usb WIDE UP AGGREGATE, WIDE DOWN AGGREGATE, LEFT AND RIGHT NARROW AGGREGATE X 4 WIDTH 1200 mm smooth feed adjustment inverters

Year of construction: 1994, condition: good (used), Used M-Tec Ploughshare mixer Njdoir E E Eopfx Ab Uedb Type MS-150 Batchmixer Minimal mixing volume 350 dm3 Maximum mixing volume 1500 dm3 Motor 37kW 115 rpm Incl. Sampling unit specicon

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 540 h, load capacity: 1,400 kg, lifting height: 4,000 mm, free lift: 1,350 mm, fuel type: electric, mast type: triplex, construction height: 1,800 mm, fork length: 1,200 mm, empty load weight: 1,300 kg, total length: 785 mm, drive type: Elektro, construction width: 800 mm, High-lift pallet truck Load centre: 400 Ndodpfx Absyr T Anj Ueb Mast type: Triplex Technical condition: good Front tyre type: Polyurethane Front tyre condition: 80 - 100% Rear tyre type: Polyurethane Rear tyre condition: 80 - 100% Battery voltage: 24V Battery capacity: 250Ah Battery year: 2025 Battery condition: 80 - 100%

Condition: used, Year of construction: 2005, Single-sided edge banding machine Manufacturer: IMA Type: Novimat Systems/I/R75/1000 Year of manufacture: 2005 Technical data PC control - ICOS OPEN control system Feed rate 5-25 m/min, frequency-controlled Fence with electronic positioning control Adhesive application above and below Trimming unit with 2 motors, each 4.5 kW, 9,000 rpm, controllable. - Horizontally adjustable via axis Heating element approx. 300 mm long, 2x 1.5 kW Gluing unit - Adhesive application with pneumatic quick-lock system. - Automatic PU melting system Quickmelt for 2 kg cartridges - 32-position edge magazine (8 slots up to 3 mm / 24 slots up to 1.3 mm) Vertical roller holder for 32 rollers, max. diameter 850 mm Cutting unit on the upper pressure roller with 2 motors, each 200 W, 400 V, 12000 rpm. - Horizontal pneumatic swiveling 0-25 - With controllable side contact, for 3 edge thicknesses Ndsdpfx Aozuyhnjb Ujb Trimming unit with 2 motors, each 1000 W, 400 V, 200 Hz, 12000 rpm. - Operating in counter-rotation. Multi-processing unit 08.348 - For chamfering or radius trimming of the upper and lower longitudinal edges, as well as for copying the front and rear workpiece edges. - Program-controlled adjustment for up to 4 profiles - 2 motors, each 660 W, 400 V, 200 Hz, 12000 rpm. Spray nozzles above and below for applying cleaning agents Multi-profile scraper unit - With stepper motor axes for horizontal and vertical positioning. - For 4 profiles. Straight scraper unit - With electro-pneumatic retraction device Copying edge smoothing unit - With 4 smoothing motors, each 250 W - Smoothing unit with 2 lower and 2 upper motors, each 180 W, 50 Hz, 1400 rpm. Smoothing unit - For smoothing and eliminating the white haze on the trimmed PVC/ABS edges - With an upper and lower smoothing zone With workpiece return system LGIMATECH ZHR 05/L/145 - Air cushion table, inclined, 2 return belts with brushing devices from below. Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, functionality: fully functional, power: 119 kW (161.79 HP), operation weight: 1,300 kg, Year of construction: 1996, Müller MS-6 HFB (Krupp) sheet pile driver Year of manufacture: 1996 MS10 mounting Approx. 1,300 kg Centrifugal force: 464 kN Nodez Df Ipepfx Ab Uodb Tensile force: 120 kN Frequency: 42.5 Hz Amplitude: 13.7 mm Drive power: 119 kW

Condition: used, Year of construction: 1994, turning diameter over bed 350 mm turning diameter over slide rest 310 mm turning length 700 mm total power requirement 4,6 kW weight of the machine ca. 1,0 t Dimensions (HxWxD) 2.200 x 1.300 x 1.175 mm --> Technical data Centre height: 175 mm --> Centre width: 800 mm --> Swing diameter over bed: 350 mm --> Swing diameter over support: 310 mm --> Gap length in front of the faceplate: 145 mm --> Cross slide travel: 205 mm --> Top slide travel: 100 mm --> Tool cross-section: 20x20 mm --> Bed Width: 220 mm Ndjdpfx Abswc Dzws Uob --> Height: 300 mm --> Headstock Spindle bore: 46 mm --> Spindle nose: DIN 55027-5 --> Spindle inner taper: 1:20 --> Tool holder: MK-3 --> Spindle speeds: 18 --> Speed range: 25 - 2000 rpm --> Tailstock Quill diameter: 50 mm --> Quill inner taper: MK-3 --> Quill travel: 140 mm --> Lateral adjustment: 10 mm --> Feed range Number of feeds: 256 --> Longitudinal feeds (128): 0.042 - 0.929 mm Rev --> Cross feeds (128): 0.015 - 0.338 mm Rev 3 - jaw chuck Multifix steel holder size B, 1 x inserts 2 x travelling steady rest, Operating instructions

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 10,850 h, load capacity: 5,000 kg, lifting height: 5,100 mm, fuel type: diesel, mast type: triplex, construction height: 2,800 mm, fork length: 1,400 mm, drive type: Diesel, Sideloader Njdpfx Abeu Adruj Usdb Mast type: Triplex Technical condition: normal

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: A/18031, SCHULER - MSP2-800- 4,5x1,8-400 Kapasite: 800 ton Hava Tüketimi: 30 m³/saat Güç: 296 kW Üst Tabla Ebatları: 4500 mm x 1700 mm Alt Tabla Ebatları: 4500 mm x 1800 mm Pres Yükseklik: 7,5 m Nsdpfozxqz Tsx Ab Uedb Pres En: 6,50 m Pres Genişlik: 4,50 m Dakikadaki Vuruş Sayısı(maksimum): 70 spm Çalışma Reglajı: 300 Kurs Değeri: 80-360 Used machine

Condition: used, functionality: fully functional, Year of construction: 2002, USED PALLET TRUCK, 1.5 tons, Lift 4200mm, YALE MS 15X-42, fully overhauled with platform and NEW BATTERY. 12-MONTH WARRANTY ON BATTERY. Nedpfx Abjzhuqwe Usdb

Condition: used, functionality: fully functional, fuel type: diesel, operation weight: 29,000 kg, emission class: euro3, Year of construction: 2016, operating hours: 5,660 h, Screen type: Triple-deck classification screen Nodjyznb Espfx Ab Ujdb Dimensions upper deck: 1,520 x 4,270 mm (W x L) Dimensions middle deck: 1,520 x 4,270 mm (W x L) Dimensions lower deck: 1,520 x 3,660 mm (W x L) Feeding capacity up to approx.: 350 t/h Feed size: 150 mm Engine: Cat Power: 75 kW Transport dimensions: 15,610 x 3,100 x 3,450 mm (L x W x H) Weight: 29,000 kg Hopper volume: 8 m³ Drive: Dual Power diesel and electric drive Operating hours electric drive: 10 h

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Njdeyhbt Hspfx Ab Ujdb Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: used, Year of construction: 2005, For inquiries regarding the attachment, please contact Mr. Herden (at the phone number provided). Hultdins Supergrip timber grapple SG360S-LP / MS10 mount / Year of manufacture: 2005 / in stock & immediately available Price: €1,990.00 net / €2,368.10 gross Weight: 370 kg Grapple width: approx. 450 mm Max. load capacity: 5,000 kg Max. working pressure: 20 MPa In our warehouse, we have a very large selection of various attachments that are immediately available! Mr. Herden (at the phone number provided) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. Nsdpsz Efn Eefx Ab Usdb We are an official Magni telescopic handler sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal ID: 277150 = Further information = Unladen weight: 370 kg Please contact Marius Herden for further information.

Year of construction: 2015, condition: used, Used Machine Year of Manufacture: 2015 with refrigerated dryer Features and Technical Specifications: - Pressure: 10 bar - Suction capacity: 660 l/min - Speed: 1025 rpm - Tank volume: 270 l - Noise level: 78 dB(A) - Effective flow rate: 520 l/min - Air outlet: 3/4"i - Drive power: 4 kW - Air intake capacity: 660 (l/min) - Drive type: V-belt - Tank design: vertical - Power (kW): 4.0 - Voltage (V): 400 V - Starting method: Direct-on-line (DOL) - Compression type: 2-stage Nodpszk Nqkofx Ab Usdb - Dimensions: 750x705x1800 mm - Weight: 170 kg With DK 985 Eco refrigeration dryer: - Airflow at pressure dew point 3 °C: 600 l/min - Power consumption: 0.3 kW - Pressure drop: 0.25 bar - Voltage: 230 V - With automatic condensate drain - Dimensions: 325 x 263 x 745 mm - Weight: 25 kg Availability: available shortly Storage location: DE-63934 Röllbach

Condition: new, Bernardo belt grinder MS 150 x 2000 DC-2 / 400 V Technical specifications belt dimensions 150 x 2000 mm Belt speed 18 / 36 m/sec. contact wheel Ø x B 200 / 150 mm surface grinding table 500 x 150 mm suction connection Ø 2x 100 mm Suction capacity 520 m3/h speed suction 2780 rpm Motor power extraction 0,37 kW Motor output power S1 100% 2,5 / 3,3 kW Motor input power S6 40% 3,3 / 4,3 kW Voltage 400 V length 1130 mm Width 600 mm Height 1130 mm Weight approx. 116 kg Scope of delivery - Sanding belt K 80 - Hinged protective disk Njdpopag Ttofx Ab Uodb - Integrated suction - 2x aluminum suction hose diam. 100 mm - filter bag - Grinding and support table - Workpiece stop - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate emergency stop button - Base frame

Condition: used, Year of construction: 2012, CNC laser cutting machine Ndsdpfxjx Eh Drj Ab Ujb Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC control: iMSNC Windows Approximate laser operating hours: 4,000-5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Sheet metal thickness, steel (max.): 15 mm Sheet metal thickness, stainless steel (max.): 8 mm Sheet metal thickness, aluminum (max.): 8 mm Operating temperature: +10 to +30 °C and max. 90% humidity (at 20°C) Extraction duct (left and right): outlet on the left, Ø 250 mm Laser source: IPG Ytterbium laser system YLS 2.5 kW Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3P / 50 Hz Filter system: TEKA 4H 5.5 kW External dimensions of the complete system: approx. 10,400 x 3,610 mm 21926

Condition: ready for operation (used), Indramat MAC63C-0-MS-1-C / 95-A-0 / J1000 Permanent magnet synchronous motor, serial number: 17285. The housing has a crack near the connector, but this does not affect its functionality. Used, shows normal signs of wear, 100% functional. Scope of supply as shown in the photos. Nsdpfx Aei D Irteb Usdb

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, 1.0 units of used robot Manufacturer: FANUC Model series: M-10iA/10MS Type: A05B-1221-B902 Year of manufacture: 2018 Nodpfx Aboynuvho Uodb Maximum reach: 1,441 mm Lifting capacity: 12 kg The robot is designed for use in the food industry. The robot was only used for one year.