Used Air Damper Actuator for sale (28,091)

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM Dedpfx Aoy Iplfeptjkt 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility

Condition: good (used), Year of construction: 2024, Refrigerant dryer, OMEGA AIR, RDP 75 – used: Price ex works: €750.00 (net)! Manufacturer: OMEGA AIR Type: RDP 75 Year of manufacture: 2024 Nominal flow rate: 75 m³/h Dksdpfxezbydwj Aptst Max. operating pressure: 16 bar Ambient temperature during operation: 1 °C to 45 °C Max. air inlet temperature: 55 °C Ph~V-Hz: 1~230-50/230-60 | 0.40 kW Protection class: IP20 Contains fluorinated greenhouse gases Refrigerant: R513a | 0.39 kg | CO₂ equivalent 0.22 t Operating hours: unknown Condition: good Available: from approximately August 2026

Condition: used, Used hydrogen plant designed to produce high purity hydrogen and carbon monoxide from natural gas. Built by Air Liquide and first operated in 2015, shut down in August 2024. Output capacity as follows: - Hydrogen 60000 Nm3/hour with 99.99% purity. - Carbon monoxide 14500 Nm3/hour with approximately 99% purity. (Actual purity depends on volume of nitrogen in the natural gas feedstock.) - Superheated 40 bar steam by-product. The HyCO plant includes the following (5) main sections: - Syngas generation / steam reforming and steam generation - Gas cooling - CO2 removal unit / CO2 scrubbing - Gas drying and cryogenic dismantling - Pressure swing adsorption (PSA) Also included: sub-systems for provision of operating resources, flare system, process control and safety shutdown system. Dedey Ryrbopfx Aptjkt

Condition: excellent (used), Ref. 60) Dust Collector N° 3 “RDL” (with fan HP 125) 12’ x 40’ (mm 305 x 1015) Ref. 61) Dust Collector N° 4 “RDL” (with fan HP 125) 12’ x 40’ (mm 305 x 1015) Dodpfxjzx Eirj Aptskt Ref. 62) Dust Collector N° 5 “RDL” (with fan HP 100) 12’ x 40’ (mm 305 x 1015) Ref. 63) Dust Collector N° 6 “Concept Air” (with fan HP 30) 6’ x 20’ (mm 152,5 x 508)

Condition: reconditioned (used), Year of construction: 2017, machine/vehicle number: SN48357, functionality: fully functional, Chamber furnace with exhaust hood, fully refurbished, 12-month warranty, available for immediate delivery - Max. temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Supply and exhaust air with electrically actuated dampers (driven by Belimo actuators) - Supply air fan with frequency converter, controlled via regulator - Stainless steel exhaust hood - Bentrup 507 control system with thyristor control - Note: Controller language is German only; switching to other languages is not possible! - Additional drag element Type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current rating: 26 amperes - Supply voltage: 3/N/PE 400VAC - Connection type: prepared for fixed connection, 32 A plug Dkjdjtbq Eqopfx Aptst - Documentation, CE declaration - Electrically tested and supplied with current DGUV test protocol Inspection by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, curing furnace, tempering furnace, laboratory furnace, hardening furnace, ceramic furnace

Condition: excellent (used), Screw compressor Ecoair Type D40 Final pressure 10 bar Dkjdpfx Ajvu S Idoptjt Power 30 kW Read operating hours 58403

Condition: good (used), MANUF. CompAir Dsdpoyn Ef Tofx Aptskt MODEL L132-7.5A S/N 349021/0688 Year 2003 Power (kW) 132 Output (m³/min) 20.4 Pressure (bar) 10

Condition: good (used), Year of construction: 2008, Offer 26696 Technical specifications (approximate): Dkjdpfszvnb Sox Aptjt - CNC flame cutting machine with 2 torches, as shown in the image - 2 torches with adjustable height and inclination - Track gauge approx. 4.2 m - Track length approx. 7.5 m - Track height approx. 0.5 m - Support table - Space requirement approx. L 8 x W 7.5 x H 2.3 m - Weight approx. 3 tons

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 2,500 kg, cooling capacity: 50 kW (67.98 HP), volume flow: 10 m³/h, The Air Liquide cooling and heating system is a process thermostat designed for optimal and precise temperature control for any application demanding rapid, precise, and powerful thermal control between -80°C and +70°C. The temperature control unit works by thermally conditioning the heat transfer fluid Syltherm XLT within a closed-loop circuit. For cooling, liquid nitrogen (LIN) is used as the cryogenic medium to lower the fluid's temperature. For heating, an integrated electric resistance heater raises the fluid temperature to a maximum of +70°C. The conditioned fluid is then circulated from the unit to the external application to enable precise process temperature control. The system is fully automated, ensuring precise and reliable process control with minimal manual intervention. Original paper documentation is included. Dedswt A Eispfx Aptskt • Year of manufacture: 2016 • Manufacturer: ALTEC GmbH • Condition: Fully functional • Cooling Capacity: 50 kW • Operating temperature: -80°C - 70°C • Automation: Fully automated operation • Documentation: Original paper documentation included • Heat transfer fluid: Syltherm XLT • Heat transfer fluid flow rate: 10 m³/h • Material: Stainless steel 304L (1.4541) Dimensions: • Width: 1800 mm • Height: 2000 mm • Length: 3500 mm • Weight (empty): 2500 kg • Insulation: PU foam and aluminium sheet cladding Potential Applications Include: • Pharmaceuticals: API synthesis, reactor cooling, vaccine storage, biotech applications. • Food Processing: Flash-freezing, quality preservation. • Aerospace/Automotive: Component testing, material treatment. • Electronics: Manufacturing and testing. • Materials Science: Cryogenic milling and processing. • Research & Development: Any application requiring precise thermal cycling. We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level Dsdpfx Aezlktpeptokt at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,000 mm, total height: 4,000 mm, filter area: 140 m², suction capacity: 3,800 m³/h, negative pressure: 3,500 Pa, Dust extraction unit, fume extraction for welding, self-cleaning filter, suitable for plasma cutting, laser cutting, sandblasting, shot blasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Year of manufacture: 2003 Motor power: 7.5 kW Capacity: 3800 m3/h Inlet diameter: 280 mm Filter cartridges: 9 pcs. Filtration area: 140 m2 Fire damper Noise silencer Dimensions: Height: 4.00 m Width: 1.65 m Dedpfx Apozlzv Ietekt Depth: 2.00 m Base: 1.33 m x 1.84 m Stock number: 1148

Condition: used, axle configuration: 2 axles, total length: 1,57,000 mm, total width: 25,500 mm, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - EBS - Electronic Braking System - Air suspension, rear - Air suspension, front = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. ). Used EBERT forestry semi-trailer, low-bed trailer, type: TLS 36 ST, VIN: W0985180080D17001 Dkjdpfx Apoztltmotet self-supporting, with ECAS air suspension, fully hydraulically steered with remote control & ABS First registration: 03/2008, Permissible gross weight: 36,000 kg, Saddle load: 16,000 kg, Rear axle load: 20,000 kg, MOT: 01/2007, Low-bed length: 8,750 mm, Length: 15,700 mm, Width: 2,550 mm, Payload approx.: 27,000 kg The forestry machine is transported at a height of approx. 10-25 cm above the road surface. Tires: 235/75R/17.5 low-profile, tubeless. Tire tread: 1st axle 9-12 mm, 2nd axle 7-11 mm Axles: 2 x 10 tons Axles with S-cam brakes and ABS, hydraulically actuated two-circuit forced steering controlled from the kingpin. Saddle plate with 2-inch kingpin and drive-away wedge. 24V electric generator with HD piston pump, oil tank and 2 batteries enable remotely controlled functions via wireless remote control. Brakes: Two-line brake system according to EC with spring-loaded brake cylinders acting on the rear axles. With ABS Lighting according to StVZO (German Road Traffic Licensing Regulations). Integrated into a recessed underrun protection, incl. license plate holder. Also, warning lights in the pull-out marker panels for overwidth transport. The hydraulic forced steering is equipped with a wireless remote control as standard, so the driver can "steer" from the cab in tight hairpin turns and during turning maneuvers. Options included in the price: a. Yellow rotating beacon at the rear, pluggable b. with 4 pull-out marker panels (red/white) with a retracted width of 2,550 mm and an extended width of 2,750 mm or 3,000 mm. c. with electro-hydraulically operated ramps Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved !!! - Steering axle = Further information = Unladen weight: 9,000 kg Payload: 27,000 kg GVW: 36,000 kg Last inspection: 2027-01 Please contact Tobias Ebert for further information.

Condition: used, Vötsch Type: NTUD 125/130/125 Pass-through oven Last maintenance: 3.12.25 Temperature control in 3 zones: Control of the internal temperature via an electronic temperature control system, divided into 3 separate temperature zones and controlled by semiconductor switching devices. This ensures good temperature uniformity whether operating in fresh or recirculated air mode. Temperature program control: The CTC control system is operated via a dialog PC with TSI software for the heating control of each temperature zone, as well as the activation of the recirculation fans and damper control. Horizontal airflow with reversal: Dkedpfey H Akrjx Aptst By switching the electronically or pneumatically actuated dampers, the airflow direction can be set from left to right or right to left. The airflow direction for each of the 3 zones can be independently adjusted. Vertical airflow: By shifting a cover plate in the oven ceiling. Useful floor area: The floor area can be driven on using customer-provided loading trolleys. Recirculation fans: Each zone is equipped with a radial fan. Usable space dimensions: 1300 mm height / 1250 mm width / 1250 mm depth External dimensions: 2490 mm height / 1770 mm width / 1810 mm depth Volume: 2000 liters Connection rating: 400V(N)PE AC 50/60 Hz 22 kVA Rated current: 32 A Power: 18 kW Nominal temperature: 50 to 150°C Weight: 1000 kg Condition: used Scope of delivery: (See photo) (Specifications and data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 4514927-4514928, Printed manuals are available both for the SLAU 80-60 shrink wrapper and the TR 65-150 shrink tunnel. Automatic “L” sealer packaging machine, brand ULMA, model SLAU, equipped with a shrink tunnel, designed for packaging all types of products using either shrink film or non-shrink film, reaching outputs of up to 45 cycles/min. Highly versatile machine: its simple adjustment systems allow for rapid adaptation to different products to be packaged. Produces seamless packages on both the top and bottom of the product, ensuring high product visibility, whether shrink wrapping is applied or not. The SLAU was specifically designed to facilitate frequent size/format changes, and therefore features systems that enable all changes to be carried out easily and quickly, with no need for additional tools. Automatic in-line feeding via conveyor belt, featuring product separation and alignment, as well as manual belt width adjustment. Motorized 90° film reel holder, with mechanical perforation system and end-of-film detection. Manually adjustable former triangle height. Horizontal and vertical photocells for product detection. Three film sealing and cutting options: STD: by nichrome wire, OPC: knife or hot bar for PE films. The latter two feature electronic temperature control. Jaw opening adjustment by pneumatic actuator in three positions, increasing output with low-profile products. Sealing die equipped with safety end-pieces to prevent products from getting stuck should obstacles be encountered along the path. Belt closure system facilitates the transfer of small and/or unstable products. Sealing center alignment via jaw height adjustment. Easy-access automatic film waste rewinder with film break detector. Function and parameter control and adjustment via programmable PC. Sturdy frame built from painted welded steel tubing. Fitted with wheels and adjustable feet for transport and positioning. Right-to-left machine version. Easy integration into existing production lines. Full accessibility to all components. Ventilated electrical cabinet. Guards and safety systems compliant with CE regulations. Available in both painted and stainless steel versions. --- ULMA TR 65-150 hot air tunnel, designed for film shrink-wrapping of products discharged from side-seal wrappers, bundlers, flow packers, overlap, and other types of packaging machines. High thermal efficiency tunnel, low consumption, and minimal heat loss. Robust frame built from painted rolled steel. Easily integrated into existing production lines. Dodpfeykqhfjx Aptjkt Fitted with wheels and adjustable-height feet. Right-to-left working direction. Electronic adjustment of temperature and conveyor speed. Homogeneous distribution system of hot air flow inside the chamber to ensure significant energy savings. Maximum insulation minimizes heat loss.

Year of construction: 2023, condition: used, Used Machine Year of Manufacture: 2023 Features and Technical Specifications: - Stationary, oil-lubricated 2-cylinder piston compressor - Two-stage compression - V-belt drive - Intercooler and aftercooler - Condor pressure switch - Motor protection and safety valve - Tank pressure gauge - Check valve and relief valve - Condensate drain valve - Additional connection fittings with blind plugs - Rubber vibration dampers - Manhole opening for tank inspection - Tank compliant with AD-2000 regulations - Suction capacity: 660 l/min - Effective flow rate: 520 l/min - Maximum operating pressure: 10 bar - Motor power: 4.0 kW / 5.5 PS - Power connection: 400 V / 50 Hz - Start type: Direct start - Speed: 1,025 rpm - Vertical, internally coated 270-liter compressed air tank - Air outlet: 3/4-inch female thread with shut-off valve - Sound pressure level: 78 dB(A) - Dimensions: 750 × 705 × 1,800 mm Dodpozy Dziefx Aptjkt - Weight: approx. 170 kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale are 2 industrial air filters of the Air-Fresh-Service brand and type F-V15D The units are in very good condition and fully functional Units can be purchased individually or as a package, individual prices will be quoted on request Technical data: Year of construction: 2016 V/Hz: 400/50-60 A1,9-1,5 kW: 1.15 Structure: 2 filter chambers with 3 filters each On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Dsdpst Tyqmefx Aptskt Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2020, condition: excellent (used), Weber Legi-Air 4050E CC (Gen.3) – automatic print and apply labeling system with support frame For sale: Weber Legi-Air 4050E CC (Gen.3) – a professional industrial print and apply labeling system designed for automatic product labeling in production lines. Manufactured by Weber Marking Systems, this unit is designed for continuous operation in demanding industrial environments. The machine provides highly precise and efficient label printing and application, making it ideal for packaging and product identification processes. Technical data: Manufacturer: Weber Marking Systems GmbH Model: Legi-Air 4050E CC (Gen.3) Year of manufacture: 2020 Print resolution: 203 / 300 / 600 dpi Maximum print speed: up to 400 mm/s Capacity: up to 240 labels/min Dsdpfx Aoy Ickbeptekt Application accuracy: ±0.8 mm Minimum label size: 10 x 5 mm Maximum label size: 160 x 350 mm Maximum applicator arm reach: 400 mm Power supply: 100–240 V AC / 50–60 Hz Power consumption: 700 W Operating pressure: 6 bar Air consumption: 0.1 – 3 l / cycle Additional information: sturdy support frame included, height adjustment on the legs and on the support column, maximum labeling head height on the support frame: approx. 140 cm from the floor, can operate in four directions: left / right / up / down. TAG: industrial labeler, labeling system, label printer, print and apply system, Weber Legi-Air, Weber Marking Systems, Avery Dennison labeler, Zebra label printer, Sato labeling machine, Novexx labeling system, Videojet label applicator, Domino print and apply, automatic label applicator, carton labeling machine, production line labeler, industrial labeling machine, packaging label applicator, automatic print and apply, product labeling system, industrial label applicator

Condition: used, We have two compressor Jun-Air Model 6 mobile units available. Specs you can see on the pictures Dkedpfszwk S Aox Aptet

Year of construction: 2001, condition: used, Compressor, compressed air unit, piston compressor, quiet running compressor, compressor for dentistry, quiet running compressor Djdpsu Huvfofx Aptekt -Manufacturer: Jun-Air, quiet compressor type OF301 -Motor power: 250 W -max. pressure: 8 bar -Number: 2x compressor available -Price: per piece -Dimensions: 220/160/H230 mm -Weight: 9.2 kg/piece

Condition: used, Year of construction: 2007, Equipment: all wheel drive, This machine has just arrived in our inventory: Liebherr wheel loader L 524 Z 2 plus 1 ?Very nice machine!!! Mostly original paint No particulate filter – no AdBlue VIN: VATZ0659VZB019076 Z – Load sensing system Year of manufacture: 2007 Recorded operating hours: 10,123 Liebherr 4-cylinder in-line engine, water-cooled with turbocharging and charge air cooling, 118 hp, hydrostatic drive with 3 driving ranges: driving speed range 1: 0–6.0 km/h, driving speed range A1-2: 0–16.0 km/h, driving speed range A1-3: 0–34.0 (40) km/h * Ride vibration damper for the load-sensing system – load-sensing system damping * Hydraulic auxiliary control circuit for tipping bucket, grab bucket, silage block cutter, sweeping brush, etc. * Air conditioning * Comfort driver's seat with pneumatic suspension * 4 work lights on the front of the cab roof * 2 work lights at the rear * Rear window heating * Battery disconnect switch * Rotating beacon (flashing light on the rear of the cab roof) * Road approval possible Permissible total weight: 13,500 kg Machine width: 2500 mm * Tires, front axle: 17.5 x 25 L3 – 50% * Tires, rear axle: 17.5 x 25 L3 – 50% Offer with quick coupler and 2.0 cubic meter bucket for a price of €44,900.00 net + VAT, ex warehouse Gemmingen Equipment available at an extra charge: * Tipping bucket from 2.5, from €4,950.00 * Bucket with lower mounting for quick coupler, 3.0 cubic meters: €3,660.00 * 4-in-1 bucket 2 cubic meters, on request * Pallet fork 5 tons from €2,190.00 Can also be supplied with a used scale if required! Pfreudt WK 60 * Optionally with printer for the scale Dksdpjzxb Anofx Aptot Sale only to commercial businesses or for export. Sold as is, in the condition the machine is in. No guarantee or warranty. The specified mileage or operating hours are taken from the odometer or hour meter; we do not guarantee the accuracy of these figures! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided should not be regarded as guaranteed characteristics. The description and the information contained therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the details in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment should be checked separately if necessary. We will also gladly accept your vehicle in part exchange. For further questions, please do not hesitate to contact us. For our customers from abroad, we will prepare all customs and export documents for a smooth transfer abroad.

Year of construction: 2018, condition: ready for operation (used), Comp Air screw compressor incl. refrigeration dryer Comp Air screw compressor L 06 Djdpfx Ajy Amknjptekt 5.5 kW Year of manufacture: 2018 10 bar Delivery rate: 0.67 m³/h Refrigeration dryer PT 9

Condition: good (used), Electromechanical actuator for valves, valve drive, actuator, servo motor, air damper actuator, air damper actuator motor, gas pressure regulator, electrohydraulic drive, rotary actuator -Manufacturer: Deufra, electric actuator, rotary actuator -Type: AS 25 -Voltage: 400 V / 0.1 kW Dkodpfxszkhqco Aptjt -Mounting: Bolt circle Ø 101 mm M10 / Ø 70 mm M8 -Dimensions: 460/310/H190 mm -Weight: 19.7 kg

Condition: like new (used), Year of construction: 2023, machine/vehicle number: SN432511, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, input current: 108 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,340 °C, inner dimension length: 1,000 mm, inner dimension width: 800 mm, inner dimension height: 1,250 mm, total length: 1,800 mm, total width: 1,900 mm, total height: 2,500 mm, overall weight: 2,800 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, with 12 months warranty -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm -External dimensions (w x d x h): 1790 x 1900 x 2500 mm -Control cabinet (w x d x h): 1200 x 500 x 2350 mm -Controller cabinet (w x d x h): 600 x 900 x 1850 mm -Capacity: 1000 liters -Maximum temperature: 1340 °C -Siemens PLC control system H1700 (100 programs, each with 20 segments) Dksdpfxjzbr U Ue Aptot -Nabertherm NCC, computer-aided, extremely user-friendly control system, recording of all parameters. Recordings can be processed, supplemented with batch data, etc., and archived and printed. -Printer and UPS integrated in the controller cabinet -Automatically generated report after each heating cycle -Thyristor-controlled -2 opposing, lockable doors with safety interlock -5-sided heating -Manual air inlet damper -Motorized exhaust damper -Stainless steel exhaust hood with pipe connection flange -Calibrated control thermocouples for the three heating zones -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the empty working space, without recording -Separate control cabinet -Audible alarm and alarm light -Overtemperature limiter -Power: 75 kW -Oven weight approx. 2320 kg + control cabinet + controller cabinet -DGUV V3 test currently valid with report -Documentation, CE declaration, circuit diagrams The oven is in TOP condition. It has been used for approximately 10 months in a cleanroom for the production of implants and is of high quality (new price 100,000 EUR net) and absolutely clean. We would be happy to offer installation and commissioning as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspection in our warehouse upon request! Chamber furnace, furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enameling furnace, drying oven, industrial furnace, ceramic furnace, tempering furnace, sintering furnace

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h Dkjdjzvz Tbspfx Aptot - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: used, Year of construction: 2005, functionality: fully functional, RAKO 12-Jaw Precision Clamping System Ø 1,600 mm with Extensive Jaw Set (2 units in stock) Djdpfx Aozx D A Djptskt Manufacturer: RAKO GmbH, Gelenau Manufacturer's designation: 12-Jaw Chuck Year of manufacture: 2005 Documentation date: 2006 Drawing number: 0684.00-00 Article number: MPT-1023 / 1024 Offered is a used, stationary RAKO 12-jaw precision clamping system for mounting on a fixed machine table. The clamping system was used for machining brass cages for ball and roller bearings. It is not a conventional turning chuck for a machine spindle, but rather a permanently mounted workpiece clamping device. The design features twelve basic jaws arranged radially and evenly around the circumference. This distributes the clamping force over numerous contact points. This clamping principle is particularly suitable for large, ring-shaped, thin-walled, sensitive, or easily deformable workpieces. According to the existing manufacturer's drawings, different jaw positions are possible for internal and external clamping. The clamping system has an outer diameter of approximately 1,600 mm and a weight of approximately 2,000 kg. Scope of delivery - RAKO 12-jaw clamping system, Ø approx. 1,600 mm - twelve radially arranged basic jaws - extensive set of various clamping and adapter jaws - different interchangeable and clamping elements - additional fastening and accessory parts as shown in the images - separate wooden crate with jaws and accessories - original RAKO operating manual - overall, section, and detail drawings - drawings of various clamping positions The exact quantity and assignment of all jaws and accessories have not been finally determined. The scope of delivery is based on the images. Condition Used condition with signs of wear and tear due to age and use. Scratches, dirt, discoloration, and, in some places, slight surface rust or corrosion can be seen on the clamping system and individual accessories. Technical data - Outer diameter: approx. 1,600 mm - Weight: approx. 2,000 kg - Number of basic jaws: twelve - Jaw arrangement: radial and even - Clamping options: internal and external clamping - Jaw stroke: 28 mm according to drawing - Total clamping force: approx. 190 daN at 35 Nm actuating torque - Maximum torque on the actuating spindle: 100 Nm - Locking air: present - Maximum locking air pressure: 5 bar - Lubrication: on the twelve basic jaws and the actuating spindle - Transport: three threaded holes M30 for crane screws Mounting on the machine table According to the RAKO operating manual, mounting is done with 14 cylinder head screws M20 × 180 according to DIN 912, strength class 10.9. The specified tightening torque is 300 Nm. Jaws and accessories The scope of delivery includes an extensive range of different clamping and adapter jaws. Documented, among other things, is an adapter jaw H41 with drawing number 0721.02-03 and a finished size of 55 × 50 × 46 mm. Dimensions of clamping system: approx. 1,600 × 1,600 mm Height: to be determined Weight: approx. 2,000 kg Total shipping weight: over 2,000 kg plus accessories and packaging