Used Avb Machinery Llc Avb-Helix100St4 for sale (73,891)

Condition: refurbished (used), Lime Slaker Machine, GV-2, Continuous Lime Slaker, Quick Lime Slaker, Used Machine Manufacturer : Construction Machinery Enterprise - License Type : GV-2 Country of origin: Bulgaria Weight : 1,300 kg Capacity : For quick-slaking lime : 2 tonnes/hour For slow-slaking lime : 1.5 tonnes/hour Technical data : Chedpfezpxkqsx Ab Uoa Drum speed : 10 rpm Electric motor : 8 kW, 68 rpm The machine structure and its components have been refurbished: Tank body and water jacket section, bearings, electric motor (new), machine frame. It has also received a new modern rotary joint on the water inlet side.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Cjdpfx Abewg Sgcj Ujha Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: new, Year of construction: 2024, operating hours: 12 h, functionality: fully functional, total height: 60,000 mm, input current: 250 A, compressed air connection: 6.2 bar, input voltage: 380 V, warranty duration: 24 months, Equipment: documentation/manual, 1. Material feeding table with moving chain mechanism. Adjustable height min 0.8, max 1.4 and electric drive. 3kw L 4m 2. Large roller shredder with double blades, diameter 1.8m, depth 1.9m 380V 30kw 3. Connection point with a lock for feeding bulk materials to the crushing mill. 4. Hammer mill turbine 380v 35kw 5. Mixer for crushed raw materials, with adjustable feed hatch. Volume 4.8m3 380V 2.2kw 6. Large horizontal granulator with automatic lubrication system and programmable rotor automatic lubrication. Additional cooling of the granulator rings and fine dust extraction. MAX capacity 3T/H 380 90kw 7. Small moving conveyor belt Width 38cm, Length 2m 380v 0.5kw 8. Large transport belt with head valve Width 38cm Length 6m 380v 1.5kw 9. Pellet cooler with cyclone for fine dust collection and head valve MAX capacity 3.5T/H 380V 3kw 10. Screener/vibrating table with screenings collector and screw feeder. 380V 1.5KW 11. Long screener cylinder with screening mesh Length 3m 380V 1,5kw 12. Conveyor belt with feed to packaging. Length 4.2m 380V 0.75kw 13. BIG BAG packaging unit with calibrated scales, tolerance +/- 5gr per 1T 14. Screw conveyor for feeding material to the automatic packaging machine in bags. Length 5m diameter 27.5cm 380V 3kw 15 Automatic packaging machine with bag sewing and PVC bag sealing. There is also an automatic labeling conveyor table. Max capacity 4.2T/H with air compressor. Cedpfx Aew U Ugmeb Usha 16. New semi Electric 3T pallet trolley

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 12 h, input voltage: 380 V, input current: 200 A, type of input current: three-phase, Equipment: CE marking, 1. Material feeding table with moving chain mechanism. Adjustable height min 0.8, max 1.4 and electric drive. 3kw L 4m 2. Large roller shredder with double blades, diameter 1.8m, depth 1.9m 380V 30kw 3. Connection point with a lock for feeding bulk materials to the crushing mill. 4. Hammer mill turbine 380v 35kw 5. Mixer for crushed raw materials, with adjustable feed hatch. Volume 4.8m3 380V 2.2kw 6. Large horizontal granulator with automatic lubrication system and programmable rotor automatic lubrication. Additional cooling of the granulator rings and fine dust extraction. MAX capacity 3T/H 380 90kw 7. Small moving conveyor belt Width 38cm, Length 2m 380v 0.5kw 8. Large transport belt with head valve Width 38cm Length 6m 380v 1.5kw 9. Pellet cooler with cyclone for fine dust collection and head valve MAX capacity 3.5T/H 380V 3kw 10. Screener/vibrating table with screenings collector and screw feeder. 380V 1.5KW 11. Long screener cylinder with screening mesh Length 3m 380V 1,5kw Codpfsw Ulp Ejx Ab Ueha 12. Conveyor belt with feed to packaging. Length 4.2m 380V 0.75kw 13. BIG BAG packaging unit with calibrated scales, tolerance +/- 5gr per 1T 14. Screw conveyor for feeding material to the automatic packaging machine in bags. Length 5m diameter 27.5cm 380V 3kw 15 Automatic packaging machine with bag sewing and PVC bag sealing. There is also an automatic labeling conveyor table. Max capacity 4.2T/H with air compressor. 16. New semi Electric 3T pallet trolley

Condition: new, Year of construction: 2026, overall weight: 6,500 kg, power: 75 kW (101.97 HP), shaft diameter: 1,200 mm, warranty duration: 12 months, MIZAR ERP Series - Eco Cable Recycling Plant & Copper Wire Granulator High-Purity Copper Recovery with Minimal Energy Consumption The ERP (Eco Recycling Plant) Series is Mizar’s latest innovation in eco-friendly cable recycling. Engineered to deliver maximum copper recovery with minimal energy consumption, this high-performance system provides a space-saving, sustainable solution for separating metal and plastic components from scrap cables with up to 99% purity. CORE COMPONENTS (Advanced 3-in-1 System) • Fine Granulator (FGR): Precision size reduction to prepare scrap cables for optimal separation. • Densimetric Separator (DES): Precise, density-based dry classification for the final separation of pure copper and plastics. • Dust Collector (DTF): Centralized filtration system ensuring a clean, low-dust, and eco-friendly workspace. KEY ADVANTAGES & FEATURES • Eco-Friendly & Energy Efficient: Optimized material flow drastically reduces power consumption while maintaining high throughput. • Smart Operation: PLC-controlled touch-screen interface for real-time monitoring and easy handling. • Compact & Versatile: Space-saving design that works perfectly as a standalone copper wire granulator or as part of a larger recycling line. • Heavy-Duty Durability: CE-certified and manufactured with premium-grade materials for long-term industrial use. MODEL RANGE & TECHNICAL SPECIFICATIONS • ERP S1: Capacity: Up to 400 kg/h | Total Power: 30 kW | Rotor: 350x400 mm | Blades (R+S): 7+2 • ERP M1: Capacity: Up to 800 kg/h | Total Power: 50 kW | Rotor: 350x800 mm | Blades (R+S): 14+4 Chsdoxb A S Njpfx Ab Uea • ERP L1: Capacity: Up to 1,300 kg/h | Total Power: 72 kW | Rotor: 350x1200 mm | Blades (R+S): 21+6 • ERP XL1: Capacity: Up to 2,000 kg/h | Total Power: 102 kW | Rotor: 350x1600 mm | Blades (R+S): 28+8 Ready to optimize your cable recycling with eco-friendly technology? Contact us for a customized quotation, technical drawings, or to arrange a performance test. Mizar Recycling Machinery

Condition: new, Year of construction: 2026, power: 14 kW (19.03 HP), overall weight: 1,250 kg, total length: 1,300 mm, total width: 1,500 mm, total height: 2,140 mm, cutting length (max.): 500 mm, cutting diameter: 40 mm, number of blades: 5, rotor length: 400 mm, warranty duration: 12 months, MIZAR CMT Compact Series - All-In-One Copper Wire Granulator & Cable Recycling Machine Cjdpjv Hbdrefx Ab Usha The Ultimate Compact Solution for Maximum Copper Recovery The MIZAR CMT is an advanced, all-in-one cable recycling machine engineered for facilities with limited space but high-performance demands. Integrated with state-of-the-art Turbo Mill technology, it ensures the complete separation of even the finest copper wires (hair wires) from plastics, delivering maximum purity and scrap copper recovery in a single compact footprint. KEY ADVANTAGES & FEATURES • All-In-One Design: A complete, plug-and-play copper wire granulator engineered into a single, space-saving unit. • Integrated Turbo Mill Technology: Achieves exceptionally high purity by aggressively pulverizing and separating ultra-fine copper wires that standard granulators cannot process cleanly. • Optimized Input Capacity: Safely and efficiently processes scrap cables with a maximum thickness of up to 40 mm and a maximum feeding length of up to 50 cm. • High-Efficiency Copper Recovery: Highly effective in separating copper and plastic components, maximizing your recycling profitability. • Cost-Effective Operation: Energy-efficient drivetrain minimizes daily operational costs without sacrificing throughput. PROCESSED MATERIALS • All types of scrap electrical cables, flexible wires, communication cables, and complex harnesses (Max Ø 40 mm / Max Length: 50 cm). Ready for an all-in-one cable recycling upgrade? Contact us for a customized quotation, technical details, or a performance test. Mizar Recycling Machinery

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr230440, Control system, manufactured by CINCOM MITSUBISHI Meldas 6 axes (X1/Z1/Y1/C1/X2/Z2), Bar Ø max. 16 mm, turning length max. 200 mm, Main spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Counter spindle Ø max. 16 mm, Counter spindle speed max. 10,000 rpm, incl. spindle indexing Tool holder for a total of 17 tools (linear tool holder, front attachment, rear machining), Parts conveyor belt Chip conveyor Fire extinguishing system Loading magazine IEMCA Genius 118/3200 Year of construction 2005 The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved! control, make CINCOM MITSUBISHI Meldas 6 axes (X1/Z1/Y1/C1/X2/Z2), bar-Ø max. 16 mm, turning length max. 200 mm, main spindle, speed max. 10.000 rpm, C-axis 0,001 degree, counter spindle Ø max. 16 mm, counter spindle speed max. 10,000 rpm, incl. spindle indexing Tool holder for a total of 17 tools (linear tool holder, front attachment, backworking), Chedpfszp Iguex Ab Usa parts conveyor belt Chip conveyor Fire extinguishing system loading magazine IEMCA Genius 118/3200 year of construction 2005 The machine can be inspected by appointment. Changes and errors in the technical data and information and subject to prior sale!

Condition: used, Year of construction: 1999, machine/vehicle number: IntNr231636, used CNC sliding head lathe Citizen L520, year 1999 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, FMB Turbo 3-26 loading magazine Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight : 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight : 850 [kg] The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved! CNC sliding headstock lathe Citizen L520, year 1999 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Chsdezp Ighepfx Ab Usa Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, FMB Turbo 3-26 loading magazine Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight : 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight : 850 [kg] The machine can be inspected by appointment. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: excellent (used), Year of construction: 2006, Used high-performance roll garbage bag manufacturing machine for sale. Includes: Roll lifter, longitudinal welder, folding unit, bottom welder, and labelling unit. The machine is in perfect operational condition and can be viewed in production. For sale with factory support and spare parts due to underutilization. Technical Specifications: - Welding width: 700 mm - Maximum bag length: 2000 mm - Minimum bag length: 380 mm - Film speed: 120 m/min - Drive: Servo - Number of tracks: 2 Additional Specifications: Cedpfx Aeykz Ebeb Ujha - Heavy-duty, automatic 2-track roll garbage bag manufacturing machine - Film thickness: - LD/LLDPE: 0.012–0.060 mm (single layer) - HDPE: 0.008–0.015 mm (single layer) - Bag width: 300–700 mm - Line speed: 100–165 m/min (depending on material, thickness, and film quality) - Finished roll size: roll width 200–300 mm; roll diameter up to 130 mm Single-line labelling unit: - Label width: 70–200 mm (1 line) - Label length: 180–350 mm - Label roll diameter: max. 250 mm Year of manufacture: April 2006 Components: 1. TAI-1300C Lifting unwinder 2. SSB-1300A Slitting knife and longitudinal welding unit 3. TA-800C1 Bag making & welding machine 4. TAF-400-2N-M 2-lane folding machine 5. TAD-700 Four-axis spindle winder Other information: - Warranty: No warranty - Current status: In production - Availability: Immediate - Power requirement: 20 kW - Price: EUR 50,000

Condition: excellent (used), Year of construction: 2013, operating hours: 200 h, functionality: fully functional, screw diameter: 65 mm, overall weight: 9,000 kg, clamping force: 785 kN, total width: 1,800 mm, total length: 4,500 mm, total height: 3,000 mm, power: 0.045 kW (0.06 HP), We offer for sale a slightly used injection blow moulding machine in excellent condition. It is connected and fully operational for demonstration purposes. We can also offer several ready-made molds for canisters and lamp shades. The machine is designed for use with PMMA, PC, PP, and PE resins. Chsdpfxjthk Rzs Ab Usa

Condition: new, Year of construction: 2026, Automatic snap lock roof panel machine Sl-1 auto is designed by our company for the self-locking roof panels production in automatic mode. This machine forms a roof lock by rolling with the help of special rolling rolls. At the same time while rolling it cuts fastening holes for roof panel’s fixation. Automatic snap lock roof panel machine SL-1 auto consist of: - Roll forming part, which directly forms the desired profile of the panel with the help of rolling rollers. The machine is equipped with width easy adjustable system - to change the width; you just need to turn a special adjustment wheel. The rolling machine has 10 pairs of forming rolls to form a click-seam lock. It has special tool to cut fastening holes in panels. - Automatization system of machine, with the main elements as follows: automatic control panel, manual control panel, control cabinet, measuring wheel. With the help of this system, machine operator can program it to perform metal rolling and cutting operations in automatic mode. It is easy to set the number of panels for rolling and their lengths, so you just need to feed metal into machine, and it will roll panels of click-seam of the desired length and quantity in automatic mode. It is possible to perform several tasks (multi-tasking). If use manual control panel you can check each operation step of the automatic mode before put it to full automatic process. - Guillotine shear, designed for cutting click panels of various widths. The special configuration of blades makes it possible to cut such profile and to get high quality final product. Shear system has electric motor to make cutting operations easy. Chsdpsn Hqmmsfx Ab Usa As an additional equipment for the machine, we offer: - metal uncoiler for convenient installation of roll metal and feeding it into the machine. - full automatic decoiler to make roll forming process maximum automatic. - ribbed panel rolls, to form additional ribs to the click-fold panels, so it gets more interesting look to the roof and increasing the rigidity of the system. - ribbed panel forming machine RPFM (microwave panels machine) to form microwaves on roofing panels. Due to its low weight, the automatic roll forming machine for self-locking panels SL-1 auto can be used in the construction of civil and industrial facilities, in factory workshops and workshops, as well as directly on the roofing site. Using of machine close to the place of installation avoids transportation costs and the associated risk of damage to the roofing sheets. The high of snap lock roof panel profile when installed is 26mm: As an option, we can also make machine for 31mm lock high production: The maximum workpiece width for rolling can be 700mm. The minimum workpiece width is 250mm. Automatic snap lock roof panel machine Sl-1 auto has special protective cover that prevents foreign objects from getting to working part of machine. So snap lock automatic roll forming machine SL-1 auto is convenient to use with the help of automatic mode so you can minimize operator’s work and to get high-quality roofing panels with high productivity.

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. Codpouzv Tzefx Ab Usha As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: new, Year of construction: 2026, NEW Snap lock roofing panel roll forming machine SL-1 Csdpfxjiuz T Is Ab Uoha Snap lock roofing panel roll forming machine SL-1 is designed and manufactured by our company as one of the flagman equipment for metal roofing panels production. Following machine makes standing seam roofing panels with self-closing lock on sides (snap lock). The main advantage of such lock system is the easy way of installation: to connect two panels with each other you just need to cover bottom part with top part and press it with some force, you will hear specific click noise at this very moment. That is why name of system is self-closing lock one. Comparing to standard standing seam roofing panels with mechanical lock which you need to close with special tools or equipment, snap lock panels are much easier to install and don’t require additional expensive devices for work. To fix panels at the roof frame you can use standard self-tapping screws, to make it possible, while rolling machine makes special fixation holes on one side of roofing panels. Such simple product design also helps to save costs and make installation process easier, not spending money on clips purchasing, comparing to the standard standing seam metal roofing with mechanical lock installation. So standing seam roofing with snap lock is easier to install, does not require high skilled employees and cut expenses for additional machines purchases. Total high of panels - 31mm As per order, we can also make machine for 26mm panels high. Machine has 10 pairs of forming rolls. One of the rolls has special punching parts so can cut fixation holes at roofing panel for further installation operations. Cutting tools are made from tools steel with heating and polishing, so have longtime working period. Maximum metal width can be 700mm, minimum 250mm. Snap lock roofing panel roll forming machine SL-1 is width easy adjustable one, so to adjust machine from one panel width to another you just need to rotate special handle. Rolling length – unlimited Rolling speed (m/min.): about 7 As extra options, you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; As per customer preferences snap lock roll forming machine can be equipped with automatization system and electric shears for panels cutting. Standard supply set of self-closing lock roll former machine SL-1 includes safety covers to protect working parts of machine from foreign objects. Snap lock machine can work with various types of metal: galvanized steel, copper, aluminum, color coated metal, etc.

Condition: excellent (used), Year of construction: 2018, SBL 1060 SE Year: 2018 Sheet size (max.): 1060 x 760 mm Sheet size (min.): 350 x 400 mm Stamping size (max.): 1045 x 745 mm Gripper margin: 11 mm Platen pressure (max.): 300 tons Production speed: 8,000 sheets/hour Total power consumption: 20 kVA Elevated machine: 400 mm Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 x 350 mm to 1060 x 760 mm Max. cutting format: 1050 x 740 mm Min. sheet size: 470 x 350 mm Max. sheet size: 1060 x 760 mm Max. cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max. 4 mm) Min. gripper margin: 9.5 mm Max. inside chase size: 1155 x 852 mm Cutting plate size: 1076 x 756 mm Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L x W x H): 5,900 x 5,700 x 2,615 mm Max. pile height – feeder (with pallet): 1,750 mm Max. pile height – delivery (with pallet): 1,450 mm - Vacuum belt on feeder - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system Cedpsznlbaefx Ab Usha - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - Quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline system - Micrometric system - Stripping - Quick lock for upper and central stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) - Delivery Section - High-pile automatic non-stop delivery with conveyor - Sheet deceleration device - Tab insertion device

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, control type: CNC control, degree of automation: automatic, actuation type: electric, working width: 3,100 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, back gauge: 1,000 mm, overall weight: 3,685 kg, input voltage: 380 V, We are offering this very well-maintained CIDAN Machinery K25 30 swivel bending machine, manufactured in 2016. The machine is fully functional and features a rotating upper beam with a gooseneck rail. The bending beam has a bending beam crowning feature. The machine is located in 83083 Riedering and will be available from August. Loading, including worldwide transport, is possible. I would be happy to send you a video of the machine via WhatsApp. Machine type: K25 30 Chodpfx Aszmp Twsb Usa Capacity: 3100 × 2.0 mm Serial number: 59816-10 Date of manufacture: 2016-02 Weight: 3685 kg If you have any questions or require further information, please send us a message or call us at

Year of construction: 2017, condition: new, functionality: fully functional, machine/vehicle number: Powerbord SPL 1200mm width Laminating, Model Powerbond SPL 120 Working width: 1.2 m Heating tunnel width: 1.7 m Cooling section: 1 m Csdpfx Asyl Ubfsb Usha Electric power supply: 400 V / 3 phase / 50 Hz L1, L2, L3, N, PE Current at full load: 90 A Air supply: clean, dry air at 6 bar Number of heating modules: 24 including preheaters Number of heating zones: 6 Nominal power per module: 2.4 kW Total heating power: 58 kW Maximum temperature: 220 °C Maximum tunnel height: 150 mm Maximum pressure roller height: 25 mm Conveyor belt speed: 1–15 m/min PLC control system: Omron CJ2M Software serial number: OM1168 Airborne noise emission: < 70 dB(A) Dimensions (W x H x L): 1954 mm x 1480 mm x 3710 mm Weight: 2000 kg

Condition: new, Year of construction: 2026, overall weight: 4,750 kg, rotor diameter: 350 mm, number of blades: 62, total length: 1,850 mm, total height: 2,170 mm, total width: 2,670 mm, rotor length: 920 mm, rotor width: 350 mm, power: 50 kW (67.98 HP), warranty duration: 12 months, blade width: 50 mm, blade diameter: 50 mm, MIZAR SSH Series - Single Shaft Shredder / Einwellenzerkleinerer for Cables, Plastics & E-Waste Controlled Size Reduction with Intelligent Feeding System The MIZAR SSH Series is engineered for efficient and controlled shredding of a wide range of materials including cables, textiles, plastics, tires, electronic scrap, and various metal types. Designed for reliability, flexibility, and consistent output size, SSH shredders are ideal for recycling facilities requiring uniform material preparation before granulation or further processing. SMART SHREDDING TECHNOLOGY & ADVANTAGES • Single Rotor – Maximum Control: Customized high-alloy wear-resistant steel blades mounted on a robust single shaft ensure aggressive intake and efficient size reduction across mixed material streams. • Programmable Hydraulic Pusher: An intelligent hydraulic feeding system continuously pushes material toward the rotor, optimizing throughput and preventing idle rotation. • Automatic Anti-Jam System: In case of overload or blockage, the rotor automatically reverses direction. This protects the machine and ensures uninterrupted operation. • Screen-Controlled Output Size: A heavy-duty screen located beneath the rotor determines the final particle size. Material remains inside the chamber until it reaches the required dimensions, ensuring a homogeneous output. • Industrial-Grade Components: Siemens/WEG motors, SKF/FAG bearings, and Schneider or ABB electrical systems ensure durability and long service intervals. Fully CE-certified for international compliance. APPLICATION AREAS • Cable Recycling: Copper and aluminum cables, wiring harnesses. • Plastic Materials: HDPE, PET, film, lumps, injection waste. • Electronic Scrap (WEEE): PCBs, electronic components, mixed e-waste. • Textile & Tires: Industrial textile scrap, fabric waste, car and light truck tires (pre-cut). • Metals: Aluminum scrap, radiators, light metal fractions. MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration and screen size based on your material) • SSH S1: Compact solution for medium-scale operations. • SSH M1: Balanced performance for diverse recycling needs. • SSH L1: High-capacity industrial model for continuous operation. • SSH XL1: Heavy-duty configuration for the most demanding throughput requirements. Why Mizar SSH? Csdpfx Absg Dcq Tj Usha • Precise output size control via interchangeable screens • Stable and intelligent hydraulic feeding system • Reduced downtime with automatic reverse function • Low maintenance design with accessible rotor chamber • Seamless integration into complete recycling lines Need a tailored shredding solution? Contact us for a customized quotation, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,860 mm, total width: 1,200 mm, total height: 3,000 mm, overall weight: 5,500 kg, warranty duration: 12 months, blade width: 75 mm, power: 60 kW (81.58 HP), rotor length: 770 mm, MIZAR DSH Series - Double Shaft Shredder for Metal, E-Waste & Plastics High-Torque Performance for Demanding Industrial Applications Engineered for continuous operation, the MIZAR DSH Series delivers powerful, low-speed, high-torque shredding performance for the toughest materials. Designed for reliability, built for industrial scale. CORE ADVANTAGES • Drive System: Independent dual shafts powered by heavy-duty planetary gearboxes. High torque at low RPM ensures efficient size reduction with minimized wear. • Industrial-Grade Components: Siemens/WEG motors, SKF/FAG bearings, Schneider or ABB electrical systems. Globally trusted brands for long-term reliability. Chjdpegwhb Iofx Ab Usa • Blade Technology: Custom-engineered, high-alloy wear-resistant steel blades [Örn: HARDOX or equivalent]. Optimized cutting geometry for aggressive intake and consistent output size. • Structural Strength: Reinforced steel frame construction for vibration resistance and extended service life. Fully CE-certified for international compliance. APPLICATION FIELDS • Scrap Metal: Aluminum profiles, radiators, light scrap, sheet metal. • E-Waste: PCBs, motherboards, hard drives, mixed WEEE materials. • Cable Recycling: Copper and aluminum cables, wiring harnesses. • Plastic Waste: HDPE pipes, industrial drums, PET, big bags. • Wood & Alternative Fuels: Pallets, MDF waste, pre-shredding for RDF and SRF production lines. MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration based on your material) • DSH S1: Compact footprint. Ideal for medium-capacity operations. • DSH M1: High-performance all-round solution for diverse material streams. • DSH L1: Heavy-duty industrial powerhouse for large-scale recycling plants. Why Mizar DSH? • High torque without high energy consumption • Modular design for seamless integration into complete recycling lines • Easy maintenance access and quick blade-change system • Built for 24/7 industrial environments Need a tailored shredding solution? Contact us for a customized quotation, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, load capacity: 8,000 kg, lifting height: 7,000 mm, battery voltage: 380 V, DGUV certified until: 06/2030, overall weight: 10,000 kg, total height: 9,900 mm, Equipment: CE marking, For sale: a two-rail gantry crane, manufactured in 2025 and with only 5 months of service. In impeccable condition, fully operational, and available for viewing in operation before purchase. Key features: Capacity: 8 tons using two independent 4-ton hoists on the main beam Cedpfxszrmigo Ab Ueha Span: 8 m Lifting height: 7 m Overhangs: 1.75 m on each side Overall height: 9.9 m Equipment weight: approx. 10 tons Power supply: 380 V three-phase Travel speed: 20 m/min Manufacturer: Henan Dafang Heavy Machine Co., MHE series Includes: electrical panel, cable reels, control unit, and access ladder Complete documentation: EUROCERT certificates No. 10.16.2627 (gantry crane) and No. 10.16.2628 (electric hoist) in accordance with Machinery Directive 2006/42/EC, valid until 2030, plus manufacturing drawings and declaration of conformity. The dual hoist configuration allows for synchronized handling of long loads, making it ideal for handling pipes and drilling columns, stone processing, precast concrete, and metal structure workshops. Located in Malaga. For sale due to the cessation of the activity for which it was acquired. Price: €26,000 (excluding VAT). Option to sell with dismantling and loading handled by the buyer. Operational video available upon request. If you have any questions or need more information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024126, product width (max.): 650 mm, working width: 650 mm, We are offering this very well-maintained, two-color flexographic printing machine, manufactured in 2024. Machine designation: Flexographic printing machine / 2-color / for a web width of up to 650 mm Manufacturer: China Wenzhou Hongyang Machinery Co. Ltd. Model: HYR-650-2 Serial number: 2024126 Year of manufacture: 12/2024 Condition: very good (used) Functionality: fully functional Dismantling and transport must be organized by the buyer at their own expense. If you have any questions or require further information, please feel free to send us a message or call us. Chjdozmul Sopfx Ab Usa

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Cedezp E T Sspfx Ab Ujha Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Year of construction: 1998, condition: excellent (used), Technical detils : Chedpfx Abeh Hp H Sj Uea - Capacity - 500 nails/ min. - Power - 7 kw - Wire range - 1,0 - 4,2 mm - Nails lenght - 30 - 150 mm - Year - 1998

Condition: used, Year of construction: 2011, Industrial furnace for tempering flat glass, used in construction, for door and window glass, furniture glass, decorative glass, and certain types of coated glass. Manufacturer: SHANGHAI REFINE MACHINERY Type: RGT A-1530 Maximum glass size: 1500 x 3000 mm Minimum glass size: approx. 200 x 300 mm Glass thickness: 5-19 mm Output for 5 mm glass: approx. 16-18 cycles/hour Installed power: 500 kVA Compressed air pressure: >0.8 MPa Codpfjzh Uyrox Ab Usha Year of manufacture: 2011 Technical condition: used machine, requires technical inspection, condition as shown in the photos.

Year of construction: 2026, condition: new, functionality: fully functional, power: 200 kW (271.92 HP), load capacity: 1,300 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. Codpfxjyy Rk He Ab Ueha 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: new, power: 120 kW (163.15 HP), overall weight: 6,500 kg, Year of construction: 2025, The CUA Series efficiently separates the internal and external components of cables for recycling. The integrated system, consisting of granulation, separation, and fan units, effectively shreds and separates 99.6% of cable components. Materials can be fed manually via a conveyor belt or automatically with the SSH Series Pre-Shredding Machine equipped with smart PLC software. Its compact structure and user-friendly PLC touch-screen control panel make management easy. The CUA Series enhances durability with high-quality components and is CE-certified. Available in three models: CUA S3, CUA M3, and CUA L3. Chjdjd R Slaspfx Ab Usa