Used Böllhoff Automatic Screw Feeder for sale (25,339)

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Fjdpfxjxf Up Uo Aa Njpg Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: good (used), Screw Conveyor Custom made conveyor Overall dimensions: 3500 x 900 x 2600 mm Screw dimensions: diam. 150 x 2700 mm Fpjdpfjhfdviex Aa Nsg

Condition: excellent (used), Manufacturer:REO-USA type: reovib mts 442 Electrical data: 230 V; 60 Hz; dimensions: 610 x 560 x 1180 mm Fpsdpjt H Nk Njfx Aa Nog plate diameter: 330-380 mm weight: 223 kg

Condition: used, Diameter: 900 mm Fodpfxjh Eygho Aa Njpg

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 Fpsdpfx Aasy H Aizo Njg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate Fpjdpfxjy E Exis Aa Nog – Built-in compressor

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SCC, warranty duration: 12 months, volume flow: 45 m³/h, screw conveyor length: 6,000 mm, type of input current: three-phase, screw diameter: 323 mm, input voltage: 400 V, rotational speed (max.): 240 rpm, rotational speed (min.): 140 rpm, Custom-manufactured to order. Send us your diameter, length, and installation angle — receive a full technical quote within 24 hours. INOTEK SCREW manufactures heavy-duty SCC-type cement screw conveyors for bulk material handling in cement plants, dry mortar facilities, fly ash transfer, lime and gypsum processing lines. Based in Ankara, Turkey, we have supplied equipment to over 40 countries with full export documentation and ISO 9001:2015 certified production. KEY SPECIFICATIONS: - Diameter: Ø114 / Ø168 / Ø219 / Ø273 / Ø323mm – any size made to order - Drive speed: 140 / 200 / 240 RPM - Motor power: 1.5 kW to 22 kW (IE2 efficiency class) — Siemens motors standard - Material: Carbon steel S235/S355 standard | AISI 304/316 stainless steel on request - Screw flights: cold-rolled, 3–10mm thickness - Orientation: horizontal, inclined (up to 45°), or vertical - Custom inlet/outlet: conical, square, or rectangular - Surface treatment: primer + epoxy topcoat standard | hot-dip galvanizing on request CAPACITY BY DIAMETER (approximate, horizontal, cement powder): - Ø114 mm → 4–8 m³/h - Ø168 mm → 10–18 m³/h - Ø219 mm → 20–30 m³/h Fpedpfx Aoyq H Iusa Nog - Ø273 mm → 30–40 m³/h - Ø323 mm → 40–55 m³/h All values depend on RPM, inclination angle, and material bulk density. Custom diameters and capacities available on request. APPLICATIONS: Cement | Fly ash | Limestone powder | Dry mortar | Gypsum | Clay | Silo filling & emptying | Batching plants | Asphalt facilities WHY INOTEK: ✔ CE marked — compliant with EU Machinery Directive 2006/42/EC ✔ ISO 9001:2015 certified factory ✔ 12 months warranty — replacement parts shipped internationally ✔ Exported to 40+ countries – full documentation (packing list, EUR.1, certificate of origin, test reports) ✔ Trusted by: Coca-Cola | Unilever | Anadolu Efes | Limak Holding | OYAK | Cengiz İnşaat ✔ 20–35% more competitive than equivalent European pricing ✔ Production lead time: 3–5 weeks from drawing approval PRICING REFERENCE: Entry-level unit Ø114mm — from €1,500 EXW Ankara. All diameters, lengths, and configurations quoted within 24 hours. REQUEST A FREE QUOTE WITHIN 24 HOURS: Send us your required diameter, length, material type, and installation angle – we return a full technical offer and delivery schedule. Distributor and OEM partnerships welcome. Contact us to discuss exclusive regional agreements.

Condition: new, functionality: fully functional, power: 22 kW (29.91 HP), fuel type: electric, color: other, Year of construction: 2026, • The Fabo Wobbler feeders are designed to feed sticky, wet and large materials comfortably and clean to the crusher with an ellipse-shaped bar and unique motion mechanism. With its self-cleaning structure, it eliminates the problem of obstruction and stone compression. • Work with wet and sticky materials without clogging and jamming. • Adjustable feed rate. • It occupies less space and has smaller height. • It works without dust, vibration and noise. • Low power consumption and maintenance frequency. • Width: 1400 mm • Length: 2500 mm • Motor power: 22 kW • Bar number: 5-9 • Elliptical bar shape • Aperture: 25-150 mm • Feeding size 50-1.500 mm Fsdpfx Aey A En Eoa Nepg • Chainy drive system • Max. Capacity 200-300 T / s • Capacities calculated according to the specified material density (1.6 tn/m3)

Condition: excellent (used), machine/vehicle number: 2069056, Equipment / Additional information: WITH DELIVERY BELT Fpjdpfx Aajw Rvu Do Njg Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Fpodpfx Aoh Eibaoa Nsg Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: like new (used), Morgana Autocreaser 33 automatic creaser The device is in very good condition. A modern device that allows you to create a crease (groove), thanks to which we can bend paper or other materials more easily. Sheet size 330x900mm Weight: 400gsm Fjdpfx Aeyxryyoa Nopg programmer Weight: 150kg Manufacturer: Morgana, UK Image Creasing: Yes Creased materials: paper, cardboard, cardboard

Condition: used, The Wahli-Stream Feeder TM 530 is a reliable feeder designed for efficient paper handling. Manufactured by Wahli, this model is located in Germany, with pricing available upon request. The machine supports an A2 format and is designed to enhance productivity in printing and finishing operations. Format: 360 420 mm Equipment: AUTOMATIC ENVELOPE FEEDER (with vacuum suction) SUITABLE FOR PRESSES WITH STREAM / SINGLE SHEET FEEDERS ADJUSTABLE VACUUM, HEIGHT & SPEEDDELIVERY CONVEYOR Fpedpfx Ajvphzpea Nsg MIN ENVELOPE SIZE: 7.6 x 12.7 CM MAX ENVELOPE SIZE: 36 x 42 CM

Condition: excellent (used), Year of construction: 2011, We are pleased to present for Sale the Automatic transfer system TREC NT from Stork. Manufacturer: Stork Type: TREC NT Year: 2011 Iasbor Igpgstt Shdfor Capacity: 13500bph Condition: Used/Very good Fpsdpfxjwdibxo Aa Neg

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Fpsdpsyy U Shefx Aa Njg Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: good (used), In this offer you acquire a used longbow feeder "Canon BDT VX 370". Item for sale: 1 x Canon BDT VX370 suitable for: Canon imagePRESS C10000VP Canon imagePRESS C8000VP Ricoh Pro C7100 Serie Ricoh Pro C9100 Serie Fodpsl Axtgsfx Aa Nspg Condition: This is a used unit and may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The unit has been tested for function Packing and shipping: You are welcome to view the unit during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available upon request! Before shipment or collection, a function test will be recorded on video for you. For more information, you can of course also contact us personally.

Condition: new, This offer is for a new ‘BDT VX 370’ long-sheet feeder Fjdoyuuc Ispfx Aa Nepg Item for sale: 1 x BDT VX 370 for the following machines: Canon imagePRESS V1350 Condition: This is a brand-new unit in its original packaging Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH vibrating feeder bunkers are high-efficiency equipment designed to ensure continuous and balanced feeding of crushers in stone crushing and screening plants. These bunkers are placed in front of primary impact crushers or jaw crushers to ensure a homogeneous flow of material. This increases the capacity of the crushers, balances the loads on the intermediate crushers, and ensures continuity in the overall production line. The vibrating feeding system prevents sudden loads, eliminating the risk of overloading on conveyor belts and thermal damage to equipment. Thanks to CONSTMACH's special design, the vibrations in the bunkers are smooth and balanced. This ensures both a steady material flow and extended machine life. Otherwise, uneven feeding could cause serious wear on crusher hammers, conveyor belts, and bearings. Using a vibrating feeder bunker helps reduce maintenance costs, increase operational efficiency, and maintain long-term performance throughout the facility. Vibrating Feeder Bunker Technical Specifications Model: CPG - 09 Body Size: 2,500 x 520 mm Grid Size: 820 mm Motor Power: 2 x 3 kW Bunker Volume: 8 - 10 - 15 m³ Capacity: 80 - 100 t/h Weight: 8,000 kg Model: CPG - 10 Body Size: 3,000 x 850 mm Grating Size: 1,160 mm Motor Power: 2 x 4.5 kW Hopper Capacity: 10 - 15 - 20 m³ Capacity: 150 - 200 t/h Weight: 12,000 kg Model: CPG - 11 Body Dimensions: 4,600 x 1,100 mm Grate Dimensions: 1,400 mm Motor Power: 2 x 9.2 kW Bunker Volume: 15 - 20 - 30 m³ Capacity: 200 - 300 t/h Weight: 18,000 kg Model: CPG - 13 Body Size: 4,880 x 1,370 mm Grating Size: 1,840 mm Motor Power: 2 x 11 kW Bunker Volume: 30 - 45 - 50 m³ Capacity: 350 - 500 t/h Weight: 26,000 kg Why Choose CONSTMACH Vibrating Feeder Bunkers? CONSTMACH is a trusted brand in the industry with years of engineering experience and high production standards. Our products stand out with their durable body structure, low maintenance requirements, and energy-efficient motor systems. Each one undergoes high-quality control processes to ensure long-lasting use. CONSTMACH Vibrating Feeders increase the performance of your crushing plant while minimizing your operating costs. If you are looking for quality, durability, and maximum efficiency, CONSTMACH is the right solution. Fpodpfjxqf Sdox Aa Nog What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, Year of construction: 2026, The wobbler feeder is a feeding system that delivers superior performance, especially when handling large, sticky, and moist materials. Its structure, consisting of rotating elliptical rods, creates a vibrating motion during material flow. This motion separates fine materials from larger particles and provides consistent feeding to crushers and screens. As a result, clogging is prevented and the overall efficiency of the plant is increased. Widely used in the mining, aggregate, and recycling industries, wobbler feeders are typically placed in front of primary crushers. This ensures that the material undergoes pre-screening in the initial stage. Its ability to operate without clogging, even with sticky and clayey materials, makes it an ideal solution for demanding conditions. Its mechanically simple design, ease of maintenance, and long-lasting performance keep operating costs to a minimum. With these features, wobbler feeders are a reliable choice for all plants requiring a continuous and balanced material flow. Wobbler Feeder Technical Specifications Body Liners: HARDOX 450 – 10 mm Feeding Capacity: 150 - 200 t/h Weight: 18.5 tons Dimensions: 4,000 x 1,000 mm Wobbler Motor: 14 x 3 kW, 1500 rpm, GAMAK brand Gearbox: Heavy-duty type Walking Platforms: Available Steel Feet: Available Fsdpfoxqcn Aex Aa Nepg Why Choose CONSTMACH Wobbler Feeders? CONSTMACH wobbler feeders stand out with their high-quality, durable materials, heavy-duty gearboxes, and ease of maintenance. Each one is designed to offer long-lasting, low-cost operation. HARDOX body liners provide maximum resistance to wear, while the adjustable design easily adapts to different material types. CONSTMACH is a trusted name in the industry for its production quality, engineering support, and after-sales service. Invest in a wobbler feeder with the CONSTMACH guarantee for the continuity and performance of your facility. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products designed to meet the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Fsdpfxsyb Sdie Aa Njpg Made in Germany Good working condition

Condition: new, functionality: fully functional, fuel type: electric, color: yellow, Year of construction: 2026, The bunker of the PRO-150 Mobile crushers has been developed by our engineers as user-oriented to operate with high-level efficiency. The vibration speed of the vibrating feeding bunker is easily guided by the automation system which can be adjusted manually. This feature prevents the bunker from wearing out and provides the user with longer and more efficient usage. In order to avoid any performance loss due to the damp or muddy material processed in the crusher plants, the wobbler feeder contains all the necessary qualities. While the wobbler feeder has potential to process without any problems for many years. Aslo stands out with easy maintenance feature as well. The poor quality of material separated in the wobbler feeder is thrown into the bypass belt and therefore user get a high-quality final product. Additionally; if desires, the materials falling into the bypass can be sent directly to the screen thanks to the reversible conveyor in the bypass system under the wobbler feeder. FABO primary impact crushers are designed to crush soft and medium hard stones with high rotor speed. It is considered as the heart of the mobile system. With the help of high-speed rotating rotor crushing hammers, the products poured from the feeder are crushed with the help of pallets. Hydraulically adjustable rods allow the products to be obtained in the desired size. FABO folding type hydraulic belts send the right product to the crusher and the stock area according to customer requests after sorting through the vibrating screen. With foldable structure, the plant minimizes dimensions of the machine for the transportation. The number of stock belts can change due to customer requests. 10 mm EP 125 4-ply belt elastics moving on twisted sheets perfectly transport the aggregate coming out of the screen to the area desired by the user. Belt elasticity, which produced resistant to wear, offers many years of life without letting customer down. Fpedpfjyh Trlox Aa Njg The flap system is a special system that allows the directly crushed material to be taken from the crusher with the help of the pre-stock belt without being screened in the mesh. The plant minimizes production time with its unique location just in front of the screen.

Year of construction: 2005, condition: excellent (used), diameter: 1700mm Stainless steel Fpodefd E R Ajpfx Aa Nog

Condition: used, functionality: fully functional, input voltage: 220 V, Fully automated and fully functional automatic serger, machine head is PEGASUS. It features both upper and lower feed. Operates at a maximum speed of 9000 RPM. We have almost all types of machines for sewing casual and jean pants. Fpsdpjyctz Ssfx Aa Nsg

Condition: ready for operation (used), Stainless steel tub Dimensions: 1900 x 890 x 200 mm Fedpfx Aaox Hyp Ej Nopg

Condition: used, Year of construction: 2009, Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Engine power: 11 kW Fpodpfx Ajx Hyfyea Neg

Condition: new, Year of construction: 2025, functionality: fully functional, The ASM 6-30 is a high-speed tooth setter for band saw blades, making it perfect for companies that use different volumes of bandsaw / sawmill blades per day. The machine is very user-friendly and easy to set up, making it the ideal solution for a wide variety of customers with different experiences in the industry. Voltage - 220V Frequency - 50Hz Power - 220V Secondary voltage - 24V Blade width - 15mm-60mm Tooth pitch - 6-30mm Accuracy - +- 0.04mm Fjdpjxivgcjfx Aa Nspg Blade thickness - 1.2mm Possible types of tooth set - left, right,straight/right,left,straight The machine is very user-friendly and easy toset up, making it the ideal solution for a wide variety of customers withdifferent experiences in the industry. Achieving precise tooth setting isessential for straight cutting and extended blade life, and our advancedclamping system delivers an impressive accuracy of 0.04mm. Capable of setting80-120 teeth per minute, the ASM 6-30 enhances your company's efficiency andensures a smooth workflow.