Used Bürkert 38/120 for sale (12,208)

Condition: used, Year of construction: 2016, Spiral mixer Kemper SP 120 Year of manufacture: 2016 Condition: used, functional Iedpjz A Rz Sefx Aiysbb Capacity (dough): 120 kg Capacity (flour): 75 kg Timer with two clocks Two speed settings Bowl rotates clockwise/counterclockwise Movable with locking mechanism

Condition: used, Year of construction: 2015, Winding machine Fritsch CRH 120/400 Year of manufacture: 2015 Approx. 450 operating hours Isdpfxoz A R Ule Aiysbb Condition: technically like new, with minimal signs of wear Single-row operation 400 mm table width Output, depending on the size of the material, the number of windings, and the feed rate: max. 5000 pieces/h Suitable for line combination

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data Iodpszzz N Hefx Aiyjbb - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,174 h, product length (max.): 4,770 mm, This HOMAG KDF 230 edgebander was manufactured in 2014. It has processed a total of 65,428 workpieces and 108,908.92 meters of edge length. The machine features a digital touchscreen control panel and a multi-flexible overhead dust extraction system. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG KDF 230 machine we have for sale. Contact us for further details. - Total Operating Hours: 1174:30.12 h- Total Workpieces Processed: 65,428 Stck- Total Edge Length Processed: 108,908.92 m- Application Unit Temperature: 190 °C (Target), 76 °C (Actual)- Feed Speed: 11 m/min- Working Height: 950 mm- Pneumatic Connection: min. 6 bar- Overall Machine Length: 4,770 mm- Workpiece Width min.: 70 mm (at 8-22 mm thickness), 120 mm (at 23-40 mm thickness), 150 mm (at 41-60 mm thickness)- Workpiece Overhang: 38 mm- Workpiece Thickness: 8 - 60 mm- Edge Material Roll: 0.4 - 3 mm (max. cross section 135 mm² for PVC, 100 mm² for veneer, roll diameter max. 830 mm)- Edge Material Strip: 0.4 - 6 mm (max. cross section 165 mm²)- Control System: EasyTouch 2- Operating Voltage: 400 V / 3Ph / 50Hz- Joint Trimming Unit: 2 x 2.2 kW, 200 Hz with DIA cutter set (100 x 65 x 30 mm, Z=3, max. workpiece thickness 60 mm)- Gluing Unit: Standard A6 with workpiece pre-heater and quick-change application unit (suitable for Granulate / PU)- End Trimming Unit: 2 x 0.18 kW, 200 Hz, 12,000 rpm (swivel range 0-15 degrees) with pneumatic adjustment- Fine Trimming Unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm with pneumatic adjustment (chamfer/radius/straight), DFC combination cutters, and multi-roller sensing - Corner Rounding / Form Trimming Unit: 1 x 0.35 kW, 200 Hz, 12,000 rpm (max. edge thickness 3 mm, max. workpiece thickness 60 mm, min. workpiece length 250 mm) with structural floor attachment- Profile Scraper Unit: Quick-change heads, pneumatic adjustment, and special multi-roller sensing- Glue Joint Scraper Unit: Included with top/bottom tracing and dust extraction- Buffing Unit: 2 motors x 0.09 kW, tilt and height adjustable- Pressure Line: Smooth PU top pressure rollers- Additional Features: Hood internal lighting, feed fence extension (+300 mm), automatic edge infeed (KDX 1210/1400) Ibsdpfjzzwhfex Aiysb Technical Specification Feed Speed 11 m/min

Condition: good (used), Feeding control, controller, level controller, control -Manufacturer: H. Grote Stall- und Melktechnik, Futtersteuerung -Type: TF 38/50 -Dimensions: 220/120/H250 mm -Weight: 2.4 kg Iedpfxoxyf I Ro Aiysbb

Condition: good (used), machine/vehicle number: 3600, Year of construction: 2005, load capacity: 16,000 kg, lifting height: 4,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 5,500 mm, total width: 2,600 mm, operation weight: 23,000 kg, additional equipment features: Rear mud guards, Weight indicator, Centralized greasing system, Dual tread, Equipment: lighting, SveTruck 16120-38 from Uniktruck Ibodpfx Aioyuipvjysb Wheel type – Drive wheel: Pneumatic - Dual mounting Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20

Condition: excellent (used), CATALOG NUMBER: 7480 Technical data: - Track width: 360mm - Shaft width: 350mm - Max. blade diameter: 350mm - Blade bore diameter: 80mm - Max. cutting height: 120mm - Table size: 2040x1220mm From above: - Pawls - Driving/sprocket shaft - Pawls - Shaft with saw blades - Sliding, pressure shaft Ijdpfx Aszulzmjiyebb From below: - Rollers in front of the table, 2 pcs - Guide - Pawls - Track - Central track lubrication - Electric height adjustment of saw blade shaft - Electric height adjustment of the body - Stepless feed speed control - Extraction outlet diameter: 140mm, 160mm - Main motor: 30kW - Overall dimensions (L/W/H): 2600x2300x1850mm - Weight: approx. 4000kg ADVANTAGES – Czech production – Used multirip saw – Very good condition Net price: 30,900 PLN Net price: 7,360 EUR (depending on EUR exchange rate of 4.2) (Prices may change with large fluctuations)

Condition: excellent (used), CATALOG NUMBER 6913 TECHNICAL DATA - track width: 360 mm - shaft width: 350 mm - max. saw blade diameter: 350 mm - blade hole diameter: 80 mm - max. cutting height: 120 mm from above: - pawls - toothed feed shaft - pawls - smooth sliding shaft - shaft with saw blades - pressure sliding shaft from below: - 2 sliding rollers in front of the table - guide - pawls - track - central track lubrication - electric lifting of the saw blade shaft - electric body lifting - stepless feed speed control - feed motor approx. 2.5 kW - main motor 30 kW - overall dimensions L/W/H 2500x2300x1900 mm - weight approx. 4000 kg Isdpfx Aszu R H Ieiyebb ADVANTAGES – Czech manufacture – 2 sliding rollers in the table – used multi-blade saw – very good condition Net price: 31,900 PLN Net price: 7,600 EUR Net price calculated at exchange rate 4.2 PLN/EUR (in case of significant exchange rate changes, the price may be adjusted)

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 11,000 h, load capacity: 16,000 kg, lifting height: 4,250 mm, fuel type: diesel, mast type: duplex, power: 147 kW (199.86 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, drive type: Diesel, Heavy-duty forklift - diesel Load center: 1200 Fork width: 200 mm Fork thickness: 100 mm ISO class: Terminal West Isdpfxezx H H Es Aiysbb Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: very good

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 8445, functionality: fully functional, operating hours: 3,000 h, power: 80 kW (108.77 HP), input voltage: 380 V, input current: 126 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension height: 1,000 mm, total height: 4,425 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, We offer this Rohde SG 80/120 nitriding furnace, which is new and manufactured in 2024. Manufacturer: Rohde Schutzgasofen GmbH Model: SG 80/120 Year of manufacture: 2024 Ibedpfx Aszuabzeiyjb Condition: As new Category ID: 34 Type ID: 4293 Type: Nitriding furnace If you have any questions or need further information, please do not hesitate to send us a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: 8107000021B, spindle bore: 32 mm, spindle speed (max.): 8,500 rpm, overall weight: 4,300 kg, controller model: FANUC 32i MB, bar length: 3,200 mm, DMG MORI GILDEMEISTER SPRINT 32/5 – Short/Long Turning Automaton Iodpfxsz A Tbuo Aiyebb Well-maintained machine, low operating hours, including IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016, as well as a conversion kit to a long turning automaton (Swisstype kit) for short and long turning on a single machine. Delivery terms: Free on truck Availability: Immediate - subject to agreement NOTE: The machine must be picked up on a fixed date in mid/late October 2026; we will provide the exact date in advance! Technical data: Control: FANUC 32i MB Operating hours recorded: 25,263 Spindle hours recorded: 22,772 MAIN SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z1: 100 mm Max. speed: 8,500 RPM Drive power S1: 5.5 kW TAILSTOCK SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z2: 200 mm Max. speed: 8,500 RPM Drive power S1: 2.2 kW AXIS DATA X1: Travel: 70 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² AXIS DATA Y1: Travel: 405 mm Max. speed: 30 m/min Max. acceleration: 5 m/s² AXIS DATA X2: Travel: 300 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² TOOL HOLDER DATA – SLIDE 1: Tool holder diameter: 25 mm Number of fixed tools for external machining: 6 Tool holder size: 16 × 16 mm Number of driven tools: 4 Collet type: ESX20 TOOL HOLDER DATA – SLIDE 2: Number of fixed tools for internal machining: 4 Tool holder diameter: 25 mm Scope of delivery: IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016 Chip conveyor Available manuals Accessories as shown in the pictures Dimensions & Weight Footprint (L x W x H): approx. 7500 x 1600 x 2500 mm Weight: approx. 4300 kg Attention: Disc damaged! If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ► Upon request, we can offer transport to your destination. ► The goods are sold without any warranty. ► Technical data is subject to change.

Year of construction: 2010, condition: ready for operation (used), Automatic pouch-filling machine for tobacco. Iedozi Akbspfx Aiyebb Includes a weighing and dosing system, a packaging unit, and a device for applying excise stamps. Condition: like new. All necessary documentation for the machine, including all documents and catalogs, is available. It is possible to arrange a visit date after prior coordination via email or telephone. A video showing the machine in operation and its layout in a working state can be provided upon request.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 15 h, machine/vehicle number: 121282, BENDMAK PRO 120 – Hydraulic three-roll profile and tube bending machine | 2024 | only 15.5 hours of use We offer a nearly new hydraulic three-roll profile and tube bending machine, BENDMAK PRO 120, manufactured in 2024. The machine has been used only minimally. The control system currently shows only 15 hours and 27 minutes of machine operating time and 31 hours and 14 minutes of hydraulic operating time. Operating times can be verified directly on the machine's display – see photos. The machine is fully functional, in very good technical condition, and ready for immediate use. The sale includes an extensive set of interchangeable rolls/tools for bending various profiles and tubes, as shown in the photos. Iodpjzzkvpsfx Aiysbb Technical data: Manufacturer: BENDMAK Model: PRO 120 Year of manufacture: 2024 Serial number: 121282 Machine operating hours: 15:27 h Hydraulic operating hours: 31:14 h Type: hydraulic three-roll profile bending machine Shaft diameter: 120 mm Working roll diameter: 390 mm Motor power: 11 kW Power supply: 400 V / 50 Hz Weight: 4,720 kg CE Equipment and accessories: hydraulically controlled lower rolls hydraulic side guide rolls drive for all three rolls separate mobile control panel touchscreen display multiple sets of interchangeable rolls/tools for various profiles and tubes accessories shown in the photos are included in the sale The machine can be inspected and demonstrated in operation on-site.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Model: VR-5200 Type: Measuring Head Light Sources Observation light source: LED ring light (red, blue, green) Measurement light source: White LED Control Unit: VR-5000 Observation and Measurement Range Macro Mode Magnification (based on a 15-inch monitor) 12×: Horizontal 24.0 mm Vertical 18.0 mm Magnification (based on a 15-inch monitor) 25×: Horizontal 12.0 mm Vertical 9.0 mm Magnification (based on a 15-inch monitor) 38×: Horizontal 8.0 mm Vertical 6.0 mm Magnification (based on a 15-inch monitor) 50×: Horizontal 6.0 mm Vertical 4.5 mm Micro Mode Magnification (based on a 15-inch monitor) 40×: Horizontal 7.6 mm Vertical 5.7 mm Magnification (based on a 15-inch monitor) 80×: Horizontal 3.8 mm Vertical 2.9 mm Magnification (based on a 15-inch monitor) 120×: Horizontal 2.5 mm Vertical 1.9 mm Magnification (based on a 15-inch monitor) 160×: Horizontal 1.9 mm Vertical 1.4 mm Zoom: 1× to 4× Height Measurement Measurement resolution: 0.1 µm Height Measurement Range Without Z image composition Macro mode: 10 mm Micro mode: 1 mm With Z image composition Macro mode: 50 mm Micro mode: 30 mm Repeatability (σ) Without Z image composition: 0.4 µm With Z image composition: 1.0 µm Measurement Accuracy Without Z image composition: ±2.5 µm With Z image composition: ±4.0 µm Width Measurement Repeatability (σ) Macro mode: 1 µm Micro mode: 0.5 µm Measurement Accuracy Macro mode: ±5 µm Micro mode: ±2 µm Image Composition Fully automatic measurement (automatic XY control + automatic Z focus), automatic assignment, automatic area setup Measurable XY range: 206 × 104 mm Object Table XY travel: 184 × 88 mm (motorized) Z travel: 73 mm (motorized) Load capacity: 4.5 kg Ibodpfx Aieyc Nmwoyob Working distance: 75 mm Image Sensor 4-megapixel CMOS, B/W Transmitter Lens Dual telecentric lens ×2 Receiver Lens Dual telecentric lens Data Processing Dedicated PC as per KEYENCE specifications (Operating system: Windows 11 Pro) Power Supply Voltage: 100 to 240 V AC, 50/60 Hz Power consumption: Max. 200 VA Environmental Resistance Operating temperature: 15 to 30°C Relative humidity: 20 to 80% RH (no condensation) Weight: Approx. 28 kg (net measuring unit weight approx. 11 kg)

Condition: good (used), Year of construction: 1998, functionality: fully functional, conveyor belt length: 2,200 mm, conveyor belt width: 120 mm, total length: 2,200 mm, total width: 170 mm, total height: 1,040 mm, power: 0.09 kW (0.12 HP), motor manufacturer: BAUKNECHT, TAF article number: 1000003869 Manufacturer: SPÄHT Year of construction: 1998 Overall dimensions: 2,200 x 170 x 1,040 mm (LxWxH) Width incl. cheek: 125 mm Side panel height: 40 mm Width incl. drive: 170 mm Conveyor length: 2,200 mm Ibodpfjr Drxtex Aiysb Conveyor width: 120 mm Belt type: PVC, smooth Belt width: 80 mm Substructure: included Drive: Head drive Motor: Gear motor Motor data: BAUKNECHT, 0.09 kw, 50 Hz, 400 Volt Conveying speed: infinitely variable, max. 0.011 m/s Special features: Frequency converter, lateral guidance Condition: Used / fully functional Function test: OK

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Processing diameter: 4,200 mm Table speed: 12.3 min-1 Max. workpiece weight: 9,000 kg X-axis: 1,110 mm Processing height: 850 mm Workpiece height: min. 50 / max. 850 mm Control system: SIMATIC S7-300 Tool holder: Grinding segments Integrated dressing unit on the grinding head In 2010, the machine underwent a comprehensive mechanical and electrical overhaul. As part of this modernization, the entire automation and drive technology was converted to Siemens technology. Ibsdpsz Didnjfx Aiyjb The machine is equipped with a MARPOSS P7 in-process measuring system. The measuring system is fully integrated into the Siemens SIMATIC S7-300 PLC control system via PROFIBUS.

Condition: excellent (used), Year of construction: 2011, We are offering for sale a used, two-sided Optimus sorting system. It is an optical sorter, model WS 45200. The system has been completely disassembled and is prepared for transport. Technical data: Year of manufacture: 2011 Distribution board: 3F + N + PE, Control voltage: 24 VDC, Power supply: 400 V, 25 A (max.) Ibjdpfxjixl S Rs Aiysb Product dimensions: min. 150x150x5mm, weight 0.1kg; max. 400x280x40mm, weight 2kg Capacity: 4500 containers per hour Total length: 38 m Width: 7 m Number of feed stations: 3 units Number of flaps: 114 pieces Total number of discharge points: 201, of which 120 are on one side and 81 on the other Number of motors: 2 units Location of the machine: 89-600 Chojnice/Poland The machine has been dismantled, is stored in a dry place, and is ready for shipment. If you are interested, please contact us.

Condition: used, Year of construction: 1985, Working width: 180 mm Working height: 120 mm Number of working spindles: 4 Spindle arrangement: bottom, right, left, top Motor power, bottom spindle: 3.7 kW Motor power, right spindle: 3.7 kW Motor power, left spindle: 3.7 kW Motor power, top spindle: 5.5 kW Adjustment, bottom spindle: - Adjustment, right spindle: - Adjustment, left spindle: handwheel Adjustment, top spindle: electric Planer heads: reversible knives Feed rate: 2 Feed roller pressure: spring-loaded Power consumption: 38 A Motor brake: automatic Iodpezdzbnofx Aiyobb Dust extraction connection: Machine length: Machine width: Weight:

Condition: used, Year of construction: 2010, Spiral mixer Diosna SP 120 D Dough capacity: 120 kg Flour capacity: 75 kg Timer control system Two timers Two speed settings Isdpfxez A Skno Aiysbb Reverse operation Movable with locking mechanism

Condition: good (used), Year of construction: 2017, operating hours: 11,621 h, functionality: fully functional, machine/vehicle number: 677222, overall weight: 1,075 kg, load capacity: 120 kg, arm reach: 3,195 mm, This is a KUKA KR 120 R3200 PA palletizing robot with a KRC4 controller, manufactured in 2017. We would also be happy to offer this robot to you as a fully refurbished unit! The controller includes the following options: BoardPackage Profinet ProfiSafe Device RemoteService RemoteSupportView Ibodpfjzw A Trsx Aiyob

Condition: like new (used), Year of construction: 2019, operating hours: 20 h, functionality: fully functional, overall weight: 1,069 kg, load capacity: 120 kg, arm reach: 2,701 mm, controller manufacturer: KUKA, controller model: KR C4, teach pendant manufacturer: KUKA, teach pendant model: KUKA SmartPAD, warranty duration: 12 months, Equipment: documentation/manual, KUKA KR 120 R2700-2 with KR C4 – AS NEW / only 19.95 operating hours We offer a KUKA KR 120 R2700-2 industrial robot in as-new condition with KUKA KR C4 controller. Manufactured in 03/2019 with only 19.95 operating hours. Robot specifications - Model: KUKA KR 120 R2700-2 - Payload: 120 kg - Reach: 2701 mm - Year of manufacture: 03/2019 - Operating hours: 19.95 h - Cable set: INT 084ST2700 - Configuration: ES13 133 CTR MB1 PNT EPS AIR - Colour: KUKA Industrial Orange Controller - KUKA KR C4 EU - KSS 8.5 - Servo configuration SC4.1 - 400 V transformerless power supply Iedpfxjzyyyne Aiysbb - Siemens SCALANCE X208 - Parallel Safety interface X11 - Ethernet interface X66 - CSP 2x USB 3.0 - Cabinet base with spacer - Set of 75 mm rollers Installed KUKA software & technology packages - KUKA.PROFINET M/S 4.1 - KUKA.DiagnoseSafety 3.0 The robot is supplied with the complete configuration according to the attached technical specification. 12-month warranty included. CUSTOM CONFIGURATION AVAILABLE The robot can be supplied in its current configuration or customized according to the customer's application and technical requirements. Depending on the application, RSA Systems can provide configuration and installation of suitable KUKA software and technology packages, communication interfaces and fieldbus systems, as well as configuration for external axes and other application-specific requirements. Additional services available on request Installation & commissioning | Programming & optimization | Integration & automation | Custom robot configuration | Technical support | ISO 9283 metrology & calibration | KUKA robot training Inspection and functional demonstration of the robot at our facility is possible by appointment. Send us your application and technical requirements and we can prepare the robot configuration according to your project. RSA Systems s.r.o. Experience. Reliability. No Compromise.

Condition: used, Year of construction: 1989, Tonelli PDC 120 Universal 2000 planetary mixing machine Year of manufacture: 1989 Condition: functional Siemens control system Vessel capacity: 120 liters Includes 2 mixing vessels Includes 2 tools Accessories available upon request and subject to availability. Ibjdpsz A Sdbofx Aiyob

Condition: refurbished (used), Diosna SPV 120 AD spiral mixer - machine for 120 kg of dough - 2 mixing bowls - machine after refurbishment - 2 timers - in perfect condition Iodpeztz Ugsfx Aiyobb - scraper with dough temperature display Price on request.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 31230 12050, functionality: fully functional, pressing force: 120 t, table length: 3,100 mm, oil tank capacity: 190 l, overall weight: 8,000 kg, Equipment: CE marking, safety light barrier, We offer this used Dener DMP-CNC/120-3020 press brake, manufactured in 2012. Type: DMP-CNC/120-3020 Bending force: 120 t Bending length: 3020 mm Weight: 8000 kg Year of manufacture: 2012 Ibodpfx Aiszuxpdoyeb The machine was manufactured in 2012 and purchased by us as a brand-new unit. Since its purchase, it has been operating in a single company under the supervision of permanent operators. I assess its technical and visual condition as very good – the machine is in continuous operation, well-maintained, clean, and fully functional. Key parameters and equipment: • Model: Dener Puma 3100 x 120 CNC • Pressing force: 120 tons • Bending length: 3100 mm • Control: Intuitive ESA S 500 CNC controller with 2D graphics (easy to program, menu in Polish). • Number of axes controlled by CNC: 4 axes (Y1, Y2, X, R). • Back gauge: Automatic, moving forward-backward (X axis) and up-down (R axis), controlled directly from the CNC panel. • Table deflection compensation: Manual. • Tooling clamping: Quick-clamping system, Amada/Promecam (Euro) type, with levers – significantly reduces setup time. • Safety: Full side protection and optical curtains (safety barriers) with CE certification. Technical condition: • Electrical cabinet and hydraulics are in their original condition, with no non-factory modifications or leaks. • The machine has been regularly serviced and has been used for light and medium-sized parts.

Condition: good (used), Year of construction: 1992, machine/vehicle number: 576892, Offer 25455 Hydraulic Flat Profile and Bar Steel Shear with Notching Device and Punching Station Technical Specifications: - Flat Bar Shear: cuts up to 300 x 15 mm - Profile Steel Shear: cuts L-profile steel at 90° up to 120 x 12 mm - Bar Steel Shear: - cuts round steel up to 40 mm - cuts square steel up to 35 mm Ibsdpfx Aox S Ib Hjiysb - Notching Device: with square notching unit 100 x 42 x 10 mm - Punching Station: - punching force: 600 kN - with stop table - throat depth: 220 mm - punches in steel up to 28 mm Ø in 15 mm or 38 mm Ø in 11 mm - various punch and die sets included - Drive: 400 V / 4 kW - Space requirements: approx. W 600 x H 1550 x D 1500 mm - Weight: approx. 1300 kg