Used Baykal 3100 X 6 for sale (86,782)

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 320 t, working range: 4,100 mm, Like Baykal 320ton x 4metre Cnc Pressbrake For sale Make: Baykal Capacity: 4metre x 320ton Axis: R and X axis on the back gauge - 2 axis back gauge Iodpfevgc R Hex Anietn Year: 2022 Control: Esa S660W Complete with tooling: Multi V lower as well as segmented tooling Technical information: Up to 12mm thickness at 4 meters / Up to 15mm thickness at 3 meters Bending power: 320 tonne 5 axis Bending length (over tooling) 4100mm Bending length (between frames) 3550mm automatic under crowning and laser angle measurement system with live feedback to CNC control for the most accurate folding process

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, sheet thickness (max.): 6 mm, HACO SHEARING MACHINE 3000 X 6 HYDRAULIC MODEL: HSLX 3006 MOTORIZED BACK GAUGE Itjdpfxoz Sbxpo Anion IN GOOD VISUAL CONDITION USED MACHINE, IN WORKING ORDER INTERNAL CODE: SVR 448

Year of construction: 2005, condition: used, Working length: 3100mm, pressing force: 2500kN, max. stroke: 465mm, rapid down speed: 190mm/s, working speed: 10mm/s, rapid return speed: 150mm/s, machine weight: 18t. Machine control retrofitted to Cybelec approx. 5 years ago. Safety control completely renewed in July 2026, new Siemens components installed in the control cabinet. Inspection possible by arrangement. Iedpfx Anezun T Sjijtn

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Dimensions: 2050 x 6 / 4 mm, adjustable cutting angle and cutting gap, rear light barrier. Ijdpfx Asz Iv Nfsnietn

Condition: like new (used), Year of construction: 2020, Technical data: Working width: 2050 mm Max. bending capacity (mild steel St40): 6.0 mm Max. pre-bending (mild steel St40): 4.0 mm Top roll diameter: 170 mm Ijdpeyzc Iaofx Aniotn Side lower roll diameter: 170 mm Central lower roll diameter: 145 mm Cone bending device Hardened rolls Working height: 800 mm Mobile control panel Hydraulic drop-end bearing CE marking Motor power: 2.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very good, almost as-new condition, very little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology and wear are age-appropriate; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, punching force: 30 t, total height: 2,220 mm, total width: 5,210 mm, total length: 6,050 mm, working range: 2,540 mm, travel distance X-axis: 2,540 mm, travel distance Y-axis: 1,540 mm, punching diameter: 25 mm, workpiece weight (max.): 170 kg, overall weight: 15,000 kg, Maximize your sheet metal fabrication efficiency with this heavy-duty, high-precision Baykal BPM-TE 1525x30 CNC Punch Press. Engineered with an ultra-rigid "O" Frame design, this industrial workhorse offers unparalleled stability, minimizing frame deflection even under full-capacity operations. Equipped with premium Rexroth servo motors and linear guides, it delivers blistering speeds up to 900 strokes per minute and up to 1G acceleration—perfect for high-volume production runs and precise part creation. Manufacturer: Baykal Makina Model: BPM-TE 1525X30 Condition: Excellent / Fully Operational (Used) Location: Plovdiv, Bulgaria Availability: Immediate Technical Specifications Punching Force: 30 Tons (300 kN) Working Range (X x Y): 2540 mm x 1540 mm (Without repositioning) Maximum Sheet Thickness: 6.4 mm Maximum Workpiece Weight: 170 kg Maximum Punching Rate: 900 hits/min (1mm pitch nibbling) / 360 hits/min (25mm pitch nibbling) Turret Capacity: 12 Stations Indexable Stations: 3 x Indexable "D" Stations Maximum Punching Diameter: 88.9 mm Axes Layout: X, Y, Z, C1, C2, T Positioning Accuracy: ± 0.1 mm Repeatability: ± 0.04 mm Combined Axis Speed (X+Y): 128 m/min Key Features & Machine Benefits Finite Element Analysis (FEA) Optimized Frame: The stress-relieved, normalized O-frame ensures structural integrity, flawless punching accuracy, and a prolonged tooling life. Iodpfxjzcb Exo Anijtn Advanced CNC Control Unit: Powered by an ergonomic, free-standing Bosch MTX CNC control system with a 15.6" TFT Windows screen for simple programming and high machine availability. Smart Nesting Software: Includes Lantek Sharp Punch software for offline programming, automatic nesting, and fast DXF file importing to drastically reduce material waste. Material Protection Table: Features a smart combination of a moving table with ball transfers and brushes to prevent scratching on delicate sheet surfaces. Heavy-Duty Work Clamping: Fitted with pneumatically operated sheet clamps featuring a sliding system and sensors to eliminate material slippage and prevent sheet jamming. Integrated Production Aids: Built-in work chute with a mobile storage box for small parts collection, automatic lubrication system, and waste collection box. Safety Features: CE certified, equipped with warning lamps and light barrier safety curtains.

Condition: excellent (used), Technical Details: Working width: 3100 mm Maximum bending capacity: 16.0 mm Maximum pre-bending: 12.0 mm Top roll diameter: 300 mm Side roll diameter: 270 mm All three rolls powered Hardened rolls Conical bending device by tilting of both side rolls Swiveling control panel with digital display Hydraulic drop end bearing Motor power: 7.5 kW Dimensions (L x W x H): approx. 5800 x 1700 x 1500 mm Net weight: approx. 8.5 tons Isdpfx Ajxyvx Tonijtn The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, Simple and very robust machine; scope and condition as shown in the pictures; weight approximately 5 tons. Itedpfez Hpyhex Anijn

Condition: used, Year of construction: 2013, General technical data: Machine type: Flexographic printing press Web width: 530 mm Number of colors: 10 Equipment & Configuration: • 1-side tape cleaner • 1-side corona treatment • Turning bar • Delam/Relam unit – 1 color Iodjyplyaspfx Anijtn • Cold foil unit – 1 • Die-cut station – 1 • Master gap unit – 1 • Rewind shaft – 1 • 10 UV GEW lamps • 3 sets of sleeves • 10 anilox rollers • 3 magnetic cylinders

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,763 h, pressing force: 61 t, total width: 1,580 mm, total height: 2,545 mm, overall weight: 5,400 kg, product length (max.): 2,100 mm, number of axes: 7, This 7-axis Baykal APHS 21060 press brake was manufactured in 2021. It features a pressing force of 60 tons and a bending length of 2100 mm, providing robust performance for various applications. The machine includes a throat depth of 410 mm and a stroke of ram measuring 210 mm. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 21060 press brake we have for sale. Contact us for further details. • Performance and capacity: • Distance between columns: 1600 mm • Throat depth: 410 mm • Daylight opening: 475 mm • Stroke of ram: 210 mm • Table width: 60 mm • X-axis travel: 1000 mm • Backgauge axis: Y1, Y2, X, R, Z1, Z2 + crawling • Hydraulics and drive: • Hydraulic pressure: 265 bar • Oil capacity: 140 liters • Main motor power: 10.3 kW • Installed power: 11 kW • Power supply: 400 V / 50 Hz / 3 Ph • Other: • Maximum stopping time: 80 ms Isdpfjzdktmex Anijtn Additional equipment • Upper tool, 57 kg • Lower tool, 87 kg Technical Specification Bending Length 2100 mm

Condition: good (used), Year of construction: 2009, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, stroke length: 250 mm, operating speed: 100 mm/s, reverse speed: 90 mm/s, table height: 900 mm, throat depth: 400 mm, total length: 4,550 mm, total width: 2,350 mm, total height: 2,950 mm, overall weight: 15,000 kg, controller manufacturer: CYBELEC, controller model: MODEVA 10S, working width: 3,100 mm, bending force (max.): 250 t, distance between stands: 2,550 mm, installation height: 517 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 6, type of crowning: CNC-controlled, Technical data NEW INTERMEDIARIES/PUNCHES/DIES. Protective laser Crowning table with CNC CNC CYBELEC MODEVA 10S CNC axes: Y1/Y2/X/R Manual axes: Z1/Z2 Itsdpeymyffjfx Anisn Year: 2009 FREESTANDING MACHINE

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 200x3100, functionality: fully functional, pressing force: 200 t, stroke length: 215 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, overall weight: 12,000 kg, controller manufacturer: Bystronic, working width: 3,100 mm, bending force (max.): 200 t, working range: 3,100 mm, control type: CNC control, number of support arms: 4, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, lower tooling, safety light barrier, upper tooling, Used High quality / very good condition Bystronic Xpert 3metre x 200ton cnc pressbrake for sale Bystronic Beyeler Xpert 200×3100 Make: Bystronic Model: Xpert 200 Year / new: 2008 Total axis: 8 – 6axis back gauge X1 X2 R1 R2 Z1 Z2 Hydraulic upper and lower tool clamping Tool stacking system Crowning Free standing no pit required Capacity / bed size / tonnage: 3metre x 3100mm x 200ton Fully serviced with Bystronic Uk General Information: Ijdpfx Aovua Ifoniotn Model: XPERT2000x3100 Manufactured: 2008 Specification: Working length mm 3100 press force kN 2000 stroke mm 215 Rapid Approach mm/s 190 Working speed mm/s 10 Return speed mm/s 150 Weigh 12,000kg

Condition: good (used), Year of construction: 2015, functionality: fully functional, Reverse Osmosis Plant for ethylene glycol recovery, with a 12 m³ raw-water storage and homogenisation tank, nominal feed flow rate of 4 m³/h at 4 bar and filter backwash flow rate of 11 m³/h at 1.5 bar. Includes an automatic downflow multimedia filter with anthracite and sand beds supported on gravel, designed to remove suspended particles and protect the membranes. Compact skid-mounted reverse osmosis unit with two-stage filtration using replaceable 20- and 5-micron cartridges, a variable-speed high-pressure pump and a two-stage (1+1) × 6 reverse osmosis membrane configuration. Equipped with 8-inch DOW spiral-wound aromatic polyamide membranes installed in GRP pressure vessels rated up to 1,000 psi. Nominal recovery rate: 90%, equivalent to a theoretical permeate production of approximately 3.6 m³/h under design conditions. Low- and high-pressure piping and interconnections manufactured from AISI 316L stainless steel. Includes recirculation, front and side permeate collection, a CIP chemical cleaning system, membrane flushing, a GRP solution-preparation tank, a 25-micron mesh microfilter and a delivery pump for cleaning solutions and permeate water. Automated control system based on a Siemens S7-200 PLC, providing measurement and control of flow rates, temperature, pressures, pressure drops, operating times, pumping, backwashing, flushing and process alarms. Operator panel with a 6-inch colour touchscreen for parameter display and configuration, start/stop control, filter washing, alarm monitoring and trend graphs. Includes a 2 m³ reverse osmosis reject-water tank for subsequent transfer to the evaporator. Serial No.: MPP51525. Itodpfx Aozvddcsnion

Condition: used, Year of construction: 2005, machine/vehicle number: 05/460/013, functionality: fully functional, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, stroke length: 265 mm, operating speed: 200 mm/s, overall weight: 18,000 kg, Equipment: CE marking, For sale: Betzeler 3200 KN x 3100 MM machine – Hydraulic bending press Manufacturer: Beyeler GmbH, Mühlhäuser Strasse 3, D-99867 Gotha Machine type: PR 3200 kN x 3100 mm Serial number: 05/460/013 Itsdpfx Anozm S Ttjisn Year of manufacture: 2005 Machine weight: 18,000 kg Electrical data Voltage: 400 V Power: 30 kW Frequency: 50 Hz Phases: 3∼ Max. fuse rating: 80 AT Hydraulic/pneumatic data Max. air pressure: 8 bar Technical data (press brake) Force: 3200 kN Max. stroke: 265 mm Max. closing speed: 200 mm/s Pressing speed: 1–10 mm/s Max. O.A. response time: 90 ms Min. ESPE safety distance: 290 mm

Condition: good (used), Year of construction: 1981, Ural 375D | 6x6 | Off-road drive | Military vehicle. For sale: the legendary Ural 375D – a reliable military truck with a 6x6 drive, designed to operate in the most challenging off-road conditions. - Imported from Germany, complete documentation available. - New tarpaulin. • Engine: V8 gasoline ZIL-375 (7.0L) • Power: approx. 180 hp • Drive: 6x6 (with axle disconnect capability) • Transmission: 5-speed manual • Off-road tires in good condition • Central tire inflation system Itjdez Sk U Tjpfx Anijn • Cargo bed with tarpaulin Starts without any problems, ideal for collector's purposes, off-road expeditions, military shows, or as a base for conversion (e.g., an expedition camper).

Condition: excellent (used), Technical Data: Isdpfx Anoyzm Nhoijtn Working length: 3100 mm Distance between uprights: 2560 mm Pressing force: 220 t CNC control: OPERATOR II grafic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Bending simulation automatic crowning motorized adjustable backgauge Throat depth: 650 mm Stroke: 200 mm Working height: 960 mm Laser safety system: FIESSLER Motor power: 17 kW CE marking Dimensions (LxWxH): approx. 3700 x 2400 x 2900 mm Weight: approx. 15 tons Accessories: 1 set of tooling: 1 upper tool 120 mm 1 lower tool, segmented die: V 50, 35, 22, 16 Condition: Very good condition, complete overhaul in 2026 The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are age-appropriate; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 2017, operating hours: 280 h, functionality: fully functional, machine/vehicle number: CR751, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual,

Condition: good (used), Year of construction: 2001, Cutting length 3060 mm Maximum cutting capacity 6 mm Manual adjustment of cutting gap 750 mm backstop Fold-up finger guard Support arms with scale Iedpfx Ansz Sx Exsijtn with sheet metal holding device

Condition: excellent (used), Year of construction: 2000, Technical specifications: Working length: 3100 mm Frame width: 2760 mm Press force: 170 t Iodpfxoyi Upde Anistn CNC control: OPERATOR Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 automatic crowning motorized adjustable backgauge Throat depth: 410 mm Stroke: 200 mm Working height: 960 mm Motor power: 16.5 kW CE mark Dimensions (Length x Width x Height): approx. 3500 x 2200 x 2900 mm Weight: approx. 11 tons Accessories: 1 pc. new upper tool 1 pc. new 4-sided die The seller is not liable for any typographical or data transmission errors. The machine is provided in a condition appropriate to its age for appearance, technology, and wear; used machines are sold without any guarantee or warranty.

Condition: excellent (used), Technical data: Itsdpfx Anoyxvgqoisn Max. cutting width: 3100 mm Max. cutting capacity (steel ST45): 0.4 - 10 mm Motorized adjustable backgauge: 1000 mm NC control: OPERATOR Stroke: 160 mm Motor power: 15 kW CE marking Dimensions (L x W x H): approx. 3900 x 2200 x 2250 mm Weight: approx. 9 tons The seller accepts no liability for typographical or data transmission errors. The machine's visual condition, technical functionality, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1999, pressure 180 t chamfer lenght 3100 mm distance between columns 2550 mm throat 310 mm stroke 200 mm ajustment speed 80.0 mm/sec working feed 10.0 mm/sec return speed 58.0 mm/sec dayligth 385 mm table width 240 mm work height max. 885 / 1050 mm oil volume 180 ltr. total power requirement 15.0 kW weight of the machine ca. 9850 kg. range L-W-H 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition (!!) - in checked condition - machine video - ?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) * with 4x manually adjustable stop fingers * fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools Isdpjxab Erefx Anietn - 1x rotatable MULTI V universal die block - 2x front / movable support arms - 1x freely movable 2-hand foot control - operating instructions (PDF)

Condition: used, Year of construction: 1989, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Iodpfxeru Un Hj Anijtn Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: used, Surface Grinding Machine BURDETT type No 70 - 18" x 6" Travel X: 350 mm Travel Y: 150 mm Maxi grinding height: 180 mm Iedpfx Ansz Iz Tpjiotn Manual magnetic chuck Magnetic chuck dimensions: 350 x 150 mm Grinding wheel dimensions: Ø 210 mm x thickness 25 mm X and Y Axes: auto pass taking Z Axe: manual Lubricant tank Voltage : 380 V Dimensions (L x W x H): 1300 x 1200 x 1700 mm Weight: approx 1 T

Condition: excellent (used), Year of construction: 2007, AMADA MODEL HFT 103 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, FEISSLER machine mounted electronic laser guards , side and rear interlocked fencing Model Amada HFT 100/3 downstroke CNC Press brake Year 2007 Tonnage 100 KN Type CD 2000 CNC Itsdezbql Sepfx Anien Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Motor Power 7.5kw Weight 7300 kg Bed Length 3000 mm Bed Width 180 mm Throat Depth 420 mm CNC Control 12000 hours BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, machine/vehicle number: 00034269-ERH, control type: NC control, actuation type: manual, working width: 2,100 mm, stroke rate (min.): 28 1/min, table height: 800 mm, back gauge: 1,000 mm, oil tank capacity: 150 l, overall weight: 4,250 kg, total length: 3,010 mm, total width: 2,410 mm, total height: 1,650 mm, number of support arms: 2, Equipment: documentation/manual, emergency stop, foot remote control, type plate available, Standard Equipment: - Upper and lower blades also suitable for stainless steel processing - Hydraulic blade gap adjustment - Upper blade with two cutting edges, special steel hardened - Lower blade with four cutting edges, special steel hardened - Blade gap adjustment device - NC-controlled backgauge with ball screw spindle - Cutting line illumination - Automatic hold-down system Iedoxwvptepfx Aniotn - CE safety features - Support arm with ruler and side stops - Support table with ball rollers - HGS-A control console - CybTouch 6 control with color touchscreen - Mobile operator pedestal with foot switch and emergency stop button - Operating manual / CE documentation TECHNICAL DATA: Cutting length: 2100 mm Cutting capacity (42 kg/mm²): 6 mm Cutting capacity (70 kg/mm²): 4 mm Blade gap min. / max.: 0.05 - 0.8 mm Strokes per minute: 28 Hold-downs: 11 units Hold-down pressure: 9 t Main drive motor power: 11 kW Backgauge motor power: 0.75 kW Backgauge adjustment range: 1000 mm Adjustment speed: 110 mm/s Cutting angle: 1.2° Table length: 2415 mm Support arms: 2 units Width without support arms: 2410 mm Transport width: 2100 mm Table height: 800 mm Oil tank capacity: 150 l Length: 3010 mm Width: 2410 mm Height: 1640 mm Weight: 4250 kg