Used Bonfanti Mb 4023X4 for sale (2,984)

Condition: excellent (used), Year of construction: 2004, operating hours: 78,50,000 h, functionality: fully functional, MB Bäuerle CAS38-4 folding machine year 2004 standard equipment flat pile feeder 4 motorized buckles stream delivery good condition Itodsxc Inrspfx Aahoi

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of Itsdpfx Aexabm Noahsi 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch Itedpfxsxabl Sj Aahsi

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. Itedoxaatnspfx Aahji - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: Itedoxaafqepfx Aahei - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: excellent (used), Year of construction: 2021, Conveyor belts MB Conveyors Type: N-TR Iodpfx Aasvy Amhohjti BJ 2021 L. 2.0 meters B. 0.50 meters H. Up to 0.95 meters

Condition: excellent (used), Year of construction: 2020, STROAGE system MB Conveyors Year of manufacture 2020 Isdov Uacijpfx Aahjti

Condition: new, table load 1000 kg table diameter 900 mm turning speeds 0,12 - 1,2 U/min swivelling range 0 - 135 Grad speed Kipp 0,35 U/min welding current 500 A Itodpfx Aexaac Ajahsi dimensions of the machine ca. 1475 x 1050 x 900 mm For heavy industry When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Furnishing : - 1 control (integrated) - 1 wired remote control

Condition: ready for operation (used), Year of construction: 2020, Wittmann Battenfeld N-CPR angled conveyor belt Part receptacle length: 2300 mm Inclined conveyor section: 2250 mm Belt width: 400 mm Total width: 450 mm Year of manufacture: 2020 You are welcome to visit for an inspection. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided you have a valid VAT identification number. Subject to prior sale. Visit our shop and take a look at our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Isdpfxeywuayo Aahjti Deviations from technical data as well as errors in the article description are possible and remain reserved.

Condition: new, Year of construction: 2025, Equipment: documentation/manual, type plate available, Rummel conveyors 800/1800 x 340 mm - Parts pick-up 720 mm, ascending conveyor 1800 mm, conveyor width 340 mm - Quality anodized aluminium profile, with grooves - Effective width = 340 mm Belt width = 410 mm - Aluminum side guide 50 mm high - PU conveyor belt with cleats 30 mm high, approx. every 400 mm - Worm gear motor 0.12 kW - 3 x 400 V, 50 Hz - Constant belt speed approx. 4.5 m/min. - Mobile base frame, discharge height at 25° = 650 mm, at 50° = 1,250 mm - Feed hopper made of V2A - Motor protection switch with 5 m cable & 16 A CEE plug Optional: Dimensions on customer request FDA compliant belt Various belt speeds Main features: Anodized ALU profile structure (thickness 15 µm) alloy 6060 with integrated and and non-removable side guides h 50 mm. Standard configuration with central base, switch/motor protection + cable and plug. Cut and oil resistant standard conveyor belt with smooth surface in green Itjdpfxotmty Ej Aahsi polyurethane (Pantone 320), with thermo-sealed cleats h=30 mm, cleat spacing 400 mm, vulcanized conveyor belt splice.

Condition: new, Year of construction: 2025, Equipment: documentation/manual, type plate available, Rummel conveyors 800/2000 x 440 mm - Parts pick-up 720 mm, ascending conveyor 2000 mm, conveyor width 340 mm - Quality anodized aluminium profile, with grooves - Useful width = 440 mm Belt width = 510 mm - Aluminum side guide 50 mm high - PU conveyor belt with cleats 30 mm high, approx. every 400 mm - Worm gear motor 0.12 kW - 3 x 400 V, 50 Hz - Constant belt speed approx. 4.5 m/min. - Mobile base frame, discharge height at 25° = 750 mm, at 50° = 1,400 mm - Feed hopper made of V2A - Motor protection switch with 5 m cable & 16 A CEE plug Optional: Dimensions on customer request FDA compliant belt Various belt speeds Main features: Anodized ALU profile structure (thickness 15 µm) alloy 6060 with integrated and and non-removable side guides h 50 mm. Standard configuration with central base, switch/motor protection + cable and plug. Isdpfx Aastmtzyehoti Cut and oil resistant standard conveyor belt with smooth surface in green polyurethane (Pantone 320), with thermo-sealed cleats h=30 mm, cleat spacing 400 mm, vulcanized conveyor belt splice.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Folding machine "Multimaster CAS 35/2 -PBA"\nYear of production: 2007\n\n2-buckle folder\nFeatures: - computer control - automatic buckle adjustment\n- program memory\n- double sheet control\n- sheet travel control\n- automatic delivery unit adjustment\nTechnical specifications:\n- Size: max. 35x46 cm; min. 8.5 x 10 cm\n- Fold length: max. 36 cm; min. 5 cm\n- Paper weight: 40 to 250 g/m2\n- Output: 160 m per minute (depending on paper)\n- Power: 230 V / 10 A\n\nPrice on request Itedpfxsyu Spfj Aahji

Condition: used, functionality: fully functional, Year of construction: 2022, Item no.: 1000003766 Used conveyor belt driven - 1.520 mm Itjdpem Twvdofx Aahei Technical data: Manufacturer: MB Conveyors Year of construction: 2022 Overall dimensions: 1.520 x 540 x 320 mm (LxWxH) Conveyor length: 1.400 mm Conveyor width: 400 mm Cheek height: 110 mm belt type: PVC, smooth Gear motor: included - gear construction NORD 50 Hz - 230/400V - 0,18 kW Conveying speed: constant 0,1 m/s Condition: used / fully functional Function test: Ok OPTIONAL: Supports (height freely selectable), Electrical connection (ON/OFF) EMERGENCY STOP button Frequency converter

Year of construction: 2008, condition: good (used), Grist dust removal + 2 comp. Grav. dosing unit MB Engineering T 250, year: 2008, price: 6.800 €, contact: Mr. Rainer Eckerle Itjdsd S S Rzjpfx Aahji

Condition: excellent (used), Year of construction: 2017, 1 used steam boiler Manufacturer: Bosch Type: U-MB 2020 Capacity: 2,000 kg/h Permissible operating pressure: 13.0 bar Increased test pressure: 24.1 bar Maximum temperature: 195°C Iedpfx Aaszltalohsti Total volume: 2,065 l Year of manufacture: 01/2017 CE marking: CE 0036 Equipped with a Weishaupt gas burner, type WM-G20/3-A, 300-2,000 kW, ZM-LN design, 15-500 mbar, gas control system, separate control cabinet, Loos Boiler Control LBC boiler control system, feed water pump, Eco Type 1, capacity 89 kW, volume 41 liters, temperature 238°C, permissible operating pressure 31 bar, test overpressure 56 bar, and the existing coarse and fine fittings.

Condition: new, Year of construction: 2025, Heavy-duty, solid cast-iron construction High running smoothness due to ground, oil-bath lubricated gears Right-hand/left-hand operation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Ijdjg U Uv Uepfx Aahoti Motorized table feed of the X-axis Coolant system Machine lamp Gear head can be swiveled ± 60° Adjustable wedge strips Solid dovetail guide for the column, hand-scraped, for maximum stability and precision Height-adjustable, large-sized protective shield with microswitch Drilling depth stop Digital position display DRO 5 Drilling/tapping function Solid and large-sized cross table, precisely surface-finished with T-slots and adjustable wedge strips Solid machine base made of cast iron with chip collection groove Single-stage, high-quality industrial electric motor Large speed range of 60 - 2,760 rpm through 2 continuously adjustable speeds Dimensions and weights Length approx. 1600 mm Width/Depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drilling/Milling performance Arbor size max. 63 mm Shell mill size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Connection voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Milling table, horizontal Length 800 mm Width 240 mm Distance Vertical spindle - Milling table max. 420 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-axis manual 560 mm Y-axis manual 195 mm Z-axis manual 350 mm X-axis automatic 480 mm Vertical spindle Overhang 258 mm Spindle mount MK 4 Speed range 60 – 2760 rpm Number of speed ranges 2 Speed control Steuerung der Drehzahlregelung electronic Draw bar M 16 Swivel range milling head Z - X plane ± 45 ° Quill diameter 75 mm Quill stroke 120 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: new, Schneider Automation TSX A250 ALU 154 CPU, 4 MB Modnet1/SFB, condition and serial number as shown in the photo, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Ijdpsi Ec H Ejfx Aahsti

Condition: ready for operation (used), Year of construction: 2005, The following are offered: 3x Kaeser compressors, 1x Gieb compressor, 1x Atlas Copco compressor and 1x Maschinen- und Behälterbau pressure vessel. 1) Gieb compressor, 750/250-11, year of manufacture: 2005, max. operating pressure: 11bar, intake capacity: 750l/min, power requirement: 4.0kW. 2) 3x Kaeser EPC 630-150 compressors, year of manufacture: 1995, max. operating pressure: 10bar, displacement: 630l/min, motor power: 3.0kW. 3) Atlas Copco LT compressor with sound enclosure, operating pressure: 15bar. 6) Maschinen- und Behälterbau pressure vessel, volume: 350l, year of manufacture: 1997, max. operating pressure: 16bar, temperature range: -10°C to +50°C. An on-site inspection is possible. Ijdpfx Aszmh Uasahoti

Condition: used, For sale is a high-quality 3D CNC coordinate measuring machine from the renowned manufacturer Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. This device stands out for its precision, reliability, and versatility in industrial metrology. Features & Equipment: - CNC-controlled 3D coordinate measuring machine - Multi-sensor capable (optical and tactile measurements possible) - Moving-bridge design (MB/Z) for high stability and flexibility - High precision measurement of complex workpieces - Robust construction, designed for continuous industrial use - Suitable for quality control, production monitoring, and R&D applications Additional Equipment – Renishaw TP200 Probe System: The high-precision, touch-trigger Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It allows for quick probe change-outs and precise measurements even with long probe styli. Key Features: - Strain gauge technology: Minimizes deflections are registered with high accuracy; typical errors such as “lobing” are avoided - High precision: Repeatability up to 0.4 μm, 2D probing uncertainty ±0.8 μm - Fast changeover: Automatic probe change with SCR200 rack, no recalibration required - Durability: Probe module lifetime exceeds 10 million triggerings - Flexibility: Standard- (SF) and low-force (LF) modules for sensitive materials - Compatibility: Usable with Renishaw PH10 probe heads and extensions up to 300 mm Technical Specifications (excerpt): - Connection: M8 connector, PI200 interface - Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) - Probing force XY: 0.02 N, Z: 0.07 N - Overtravel force XY: up to 0.4 N, Z: up to 4.9 N - Weight (sensor + module): 22 g - Stylus threads: M2 Itsdozii Dzepfx Aahji Technical Data: - Manufacturer: Werth Messtechnik - Model: Scope-Check 650×750×500/MB/Z - Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm - Supply voltage: 115–230 V AC - Power consumption: max. 10 A Scope of Supply: - Werth Scope-Check 650×750×500/MB/Z - Renishaw TP200 probe system including probe modules - Accessories as shown in the attached images Important note: "The table shown in the photos is not included in the sale." (Specifications and technical details subject to change and errors!) We are happy to answer further questions by phone.

Condition: used, Year of construction: 2012, Overview This craft brewery system was manufactured in 2012 by Slowbeer and other manufacturers. The system is designed for beer production and includes brewhouse, fermentation vessels, milling equipment, and temperature control units. The machines are described as in very good condition with low operating usage. Technical data - Capacity: 250 L brewhouse - Application: Beer production Itsdpfx Aaey Sic Sjhei - Configuration: Brewhouse, multiple fermenters, malt mill, heating and cooling unit Scope of Delivery  - Brewhouse | Slowbeer | MB 250E | 2012 | 250 L brewhouse system - Fermenter | 2012 | 500 L stainless steel fermenter with CIP system - Fermenter | 2012 | 2 × 1,200 L isobaric conical fermenters - Fermenter | 2012 | 1,200 L isobaric flat-bottom fermenter - Malt mill | Sommer | Piccolo 11S | 2012 | Capacity 100–150 kg/h with support frame and hopper - Heating and cooling unit | Winus | Model M | 2012 | Control unit with 4 digital thermostats for up to 10,000 L - Pump | 2012 | Transfer and cleaning pump with inverter

Condition: used, Year of construction: 2013, Overview  This complete brewhouse was manufactured between 2011 and 2013 by various European manufacturers, including spanish manufacturer SlowBeer. It is for sale as the current owner is unable to dedicate sufficient time to its operation due to other business commitments. The brewhouse is currently dismantled and stored in Spain. Optional services such as dismantling, transport, and installation are available upon request. Technical data  - Brewhouse capacity: 250 liters per batch - Production cycle: approx. 2 weeks per batch - Bottling cycle: 1 day per batch - Production months/year: 10 months - Shelf life of beer: 18 months - Heating method: Electric (1 Hot Liquor Tank used), Butane option available (unused) - Fermentation tank capacity: 500 liters each (3 tanks) - Brewing system power: 15 kW - Cooling system power: 2.3 kW - Labeling power: 2 kW Scope of Delivery  - 1 x Brewing Unit | SlowBeer | MB 250 E | 2013 - 1 x Plate Heat Exchanger | Sondex Italia | S4A-IG16 | 2013 - 3 x Fermentation Tanks | — | — | — (500 L each, atmospheric) - 1 x Cooling Unit | Winus | C2-W3R 4T | 2012 - 1 x Isothermal Hot Water Tank | Industrias Céspedes | — | 2011 - 1 x Labelling Machine | CDA | R1000 | — - 1 x Filling Machine | Toscana | — | — - 1 x Manual Capping Machine | — | P0085 | — - 1 x Coder | — | MC150V | 2013 - 1 x Electric Mill | SOMMER | 11717 | — - 1 x Compressor | FINI | — | — - 1 x Compressor | MADER | YL90S-2 | 2012 (100 L tank) Ijdpfxewcyc De Aahjti - 1 x Steel Water Heating Tank | — | — | — (900 L) - 2 x Water Softeners | — | — | — - 2 x Hot Liquor Tanks | — | — | — (1 electric, 1 butane-based – unused) Optional Services: Dismantling, transport, and installation – available upon request.  

Condition: used, Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer engine DEMAG type: KBA-112-MB-6 -Manufacturer engine DEMAG type: KBL-71-A4 -Manufacturer gearbox DEMAG type: FG08-B-14-U-0-H1- -Power: 0.3/2.9 kW -Speed: 106/945 rpm -Construction: B14 -Diameter shaft: Ø 28 mm Itsdpfx Aascb E Trshsi -Protection class: IP 54 -Dimensions: 670/300/H500 mm -Weight: 102 kg

Condition: good (used), Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 165 mm -Rezess recording: Ø 125 mm -Hole circle: 140 mm (3x M10) Itsdpfx Aajb A R Tnjhsi -Inner diameter: 40 mm -Speed: max. 4000 rpm -Weight: 12 kg

Condition: excellent (used), -Bearing type: Spherical roller bearing -Type: 23224. VB 33. MB Itedpfx Aob A Rzzeahei -Brass cage -Grease groove -Borway diameter: 120 mm -Outer diameter Ø: 215 mm -Width: 76 mm -Weight: 12.5 kg

Condition: good (used), geared motor, electric motor -Speed: 61 rpm -Power: 0.37 kW -Design: B14 angle -Shaft diameter: Ø 24 mm -Brake: 24 V Ijdpfsb A Rndex Aaheti -Protection class: Tropical resistant -Weight: 15 kg