Used Buchi Spectrometer for sale (53)

Condition: good (used), Büchi R-134 Rotavapor system: 5-240 RPM 20-100 Celsius degrees Good working condition. Guedonm Apljpfx Ag Sjh Please check out our other listings as well.

Condition: excellent (used), Bruker Ultraflex TOF/TOF UT0100 G002 11 020 44 02 Guodpfx Aorit Insg Seh Mass spectrometer

Condition: used, functionality: fully functional, Agilent G1956A LC/MSD VL + PC & software mass spectrometer. The Agilent G1956 LC/MSD Mass Spectroscopy Instrument is a highly reliable, laboratory-grade mass selective detector. Godpfx Ast Uk I Esg Seuh The Agilent 1100 Series includes variable,multiwavelength, diode-array and mass selective detectors in addition refractive index and fluorescence detectors. The fluorescence detector, which has an innovative optical design, provides: • Simultaneous quantitative and qualitative information from up to four signals in a single run, saving time • Real-time spectra (similar to diodearray detection) for fast method optimization and peak identification. The mass selective detectors offer: • complete mass spectral information from the single-quadrupole LC/MSD and complete MS/MS data from the ion trap LC/MSD Trap • excellent sensitivity, reproducibility and ruggedness thanks to a patented orthogonal-spray ion source and highcapacity drying gas system. Good working condition. Please check out our other listings as well.

Condition: good (used), This Buchi R-114 Rotavap system can be used for single-staged distillations at high speeds with low stress. The digital heating bath can be adjusted from 20° to 180°C and has a volume of 5L. Modular construction makes it possible to configure units with different glassware assemblies. All of our equipment is fully tested to perform at factory specifications after arrival at our premises and before being shipped after sale. Godpfsnm Aphox Ag Sjuh Technical specifications: Voltage: 220-240 V Outer dimensions (W) x (D) x (H): 40 x 41 x 61 cm – (rotavapor) Weight: 14 – 16 kg

Condition: used, functionality: fully functional, Mettler Toledo ReactIR-4000 AUTOCHEM Spectrometer S-1206-0900A MCT Mid-Band Detector FTIR Analyzer Lab with S-1506-0001A Power Supply with Software. In situreal-time data collection- Investigate chemistry and processes in real-time, directly in reactor. Mid-infrared technology - Deduce reaction pathways, mechanisms and kinetics with the spectral information. ReactIRTMReaction Analysis Software - Determine reaction performance, conversion, completion. Analyze and monitor virtually all classes of chemical reactions. Sealed Optics - Operates safely in fume hoods, mounted either on bench top or wall. CompactTower Design - Preserves valuable lab space. Product Specifications: Mid FTIR (4800 to 450 cm-1) analyzer Compact size Sealed optics Temperature stabilized Pinned in-place detector modules Gjdpoua Hdrofx Ag Ssuh Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2023, Standard observers: 2° (1931) and 10° (1964), standard illuminants: D65, D55, F11, A, C, color spaces/values: XYZ, Yxy, LCh*, Luv*, ΔE CIE Lab*, ΔE CIE94, ΔL*, Δa*, Δb*, yellowness index according to DIN 6167 or whiteness metrics, spectral range: 400-700nm, spectral resolution: 10nm (internally 3.5nm), spectrometer: holographic grating spectrometer, display: relative values, absolute values or customer-specific values, repeatability: ΔE = 0.05 CIE Lab, repeatability test: 10 measurements of the supplied white standard, memory: non-volatile, more than 1,500 measurements without a PC, ambient temperature: 15-35°C, max. relative humidity: 85%, non-condensing, PC interfaces: USB, RS232, current output: 4-20mA, length: 235mm, width: 220mm, height: 60mm, weight: 1.85kg, including original operating manual, USB flash drive with installation file for "ColorDaTra_IPM" software version 1.94, installation file for update to version 1.95 and license key, last calibrated in 2025. On-site inspection is possible. Godpfx Ajz R Uwpjg Sjuh

Condition: used, This listing is for Thermo Scientific Evolution 300 UV-Visible Spectrometer Gsdpfxszdurme Ag Seuh The unit is in full working condition and ready for immediate use This high-performance double-beam spectrophotometer delivers exceptional accuracy and versatility for demanding research and routine quality control applications. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Year of construction: 2004, condition: used, functionality: unexamined, machine/vehicle number: 116996-04, Manufacturer: SPECTRO Analytical Instruments GmbH & Co. KG Type: SPECTROLAB F / LAVFC01A Year of Manufacture: 2004 Project/Order No.: 16996/04 Lab No.: 116996-04 Stationary metal analysis instrument / OES spark spectrometer for copper alloys Stationary SPECTRO SPECTROLAB F metal analysis instrument for quantitative material analysis using optical emission spectrometry (OES/spark spectrometry). Guedpfozx Dwnjx Ag Sjh According to the available original documentation, the system is designed for the analysis of copper-based materials. The programs CU-00 for standardizing the Cu base, CU-20 for Cu/Zn alloys, and CU-70 for Cu/Al alloys are installed and documented. The spectrometer has three documented optics and measurement channels for numerous alloy elements and accompanying elements. Among others, it detects Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, and S. Extensive original documentation is available for the instrument, including test and photomultiplier protocols, configuration documents, standardization documents, and the operating manual for the Spark Analyzer Vision software. Various re-calibration/reference samples and accessories are also included. An existing analysis printout dated December 20, 2022, documents the practical use of the system for the analysis of CuZn40Pb2 materials. The printout shows measured values for numerous alloy and trace elements. Used condition with signs of wear and tear due to age and use. The instrument dates from 2004. Extensive instrument-specific documentation, accessories, and re-calibration/reference samples are available. The use and performance of material analyses are documented by existing analysis printouts from December 2022. Scope of delivery • SPECTRO SPECTROLAB F metal analysis instrument • Available re-calibration/reference samples • Various sample specimens and standards • Set of cables or available connection lines • Small parts and consumables • Adapter for small parts • Available boron nitride discs • Available SPECTRO accessories • Software/data carrier, including SPECTRO Data Backup • Documentation and test documents • Operating manual Spark Analyzer Vision • Documents for DIA 2000 / DIA2000SE • Photomultiplier test protocols • Configuration and standardization documents PC, monitor, and printer are listed in the original delivery documents. Measurement method: Optical emission spectrometry (OES) / Spark spectrometry Design: Stationary metal analysis instrument Readout system: MICRO 8 Calibration: Cu-base Applications: Cu-20 / Cu-70 Standardization: CU-00 – Cu-Base Installed programs: CU-00 – Standardization Cu-Base CU-20 – Cu/Zn alloys CU-70 – Cu/Al alloys Optical system: 1 × UV optic, documented with 6 lines 2 × Air optics, documented with 13 / 7 lines Optic 1: 3600 / 750 Optic 2: 3600 / 750 Optic 3: 2400 / 750 Monochromator: No Excitation source: 3000 / 300 Hz / Pure Ar Operating voltage: 230 V Mains frequency: 50 Hz Operating language: German Documented elements: Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, S Photomultiplier: predominantly R6350, individual UV channels R6351 according to test documents Software according to documentation: DIA 2000 Basis / DIA2000SE, Spark Analyzer Vision Spark Analyzer Vision manual: Version 09/2004 Documented software version: 1.40.0xx

Year of construction: 2022, condition: as good as new (ex-display), functionality: fully functional, For sale is a FTIR spectrometer - NICOLET IS20 MID-IR DTGS spectrometer which was used for one year as part of a research project. Operation in laboratory environment; no damage; Scope of sale: 1x NICOLET IS20 MID-IR DTGS spectrometer 1x IS20 German device labeling 1x European Schuko plug, 250V 1x ATR ITX BASE 1x AR diamond crystal for Smart iTX ATR 1x COMP-U-16 Upgrade from monitor 20" to monitor 24" Guodpjrklx Isfx Ag Ssh 1x iS10-iS20 TRANSMISSION ACCESSORY 1x ST JAPAN ATR-FTIR POLYMER BUNDLE 1x DELL OPTIPLEX 3090 MT - I3-10105 8GB NP: € 31.998.,77 Sale EXW, tel que

Condition: used, functionality: fully functional, Agilent/HP 1100 Series MSD + PC & software. HP first benchtop quadrupole LC/MS the 1100 Series LC/MSD. The 1100 Series LC/MSD provides information quickly in one chromatographic run. It provides molecular weight structural information and has excellent selectivity needed to identify compounds check the purity of chromatographic peaks and quantitate trace level samples in complex matrices in a rugged reliable easy-to-use benchtop system. For chromatographers and mass spectrometrists who need the utmost in sensitivity the LC/MSD SL makes analyses in the very low picogram range possible. The 1100 Series LC/MSD offers many advantages as an LC detector. It offers the dynamic range and repeatability needed for most quantitative applications. In the SIM mode it offers high sensitivity. For compounds lacking a strong chromophore it offers detection limits not possible with other detectors. By offering unit mass resolution to m/z 3000 the LC/MSD allows for characterization of large proteins beyond 60000 KDalton. Having extended mass range to 3000 is also beneficial when studying modified proteins such as glycoproteins where their charge distribution falls above m/z 2000. Gedot Ui E Nepfx Ag Ssuh Good working condition. Please check out our other listings as well.

Condition: ready for operation (used), Varian 640-IR FT-IR Spectrometer The Varian 640-IR is a high performance spectrometer that makes FT-IR spectroscopy easy. With a range of unique, user-friendly hardware and software features, you can quickly become productive. Spectral range: 7900 - 375 cm-1 Spectral resolution of at least 0.25 cm-1 Signal-to-noise ratio (the number of scans is 100, with a standard configuration with a spectral resolution of 4 cm-1): at least 10000 cm-1 The level of pseudo-scattered light is not more than 0.1% Integration time: 5 s Monochromator: High-speed Cerny-Turner No software Description has been adopted. Gujdsry Tqrepfx Ag Soh You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, functionality: unexamined, machine/vehicle number: TSH 065 D, Used Pfeiffer TSH 065D with Mass Spectrometer. Complete set! Turbo pump: Pfeiffer TSH 065 D (Controller Pfeiffer TCP 015) Diaphragm pump: Vacuubrand MZ 2 NT Gjdpfxow H Np Ij Ag Sjuh Mass Spectrometer: Balzers QME 064 + Partial Pressure Gauge Printer: Philips PM8222 recorder Complete with many vacuum components.

Condition: good (used), The Buchi R-210 Rotavapor with B-491 Heating Bath offers you a complete solution with vacuum controller, vacuum pump and recirculating chiller all in a small foot-print. Features include: easy to operate, long-life seals for maintenance-free operation, vapour ducting to prevent cross contamination, compact design, maximum safety, and wireless contact on the heating bath. Specifications, Rotavapor: Dimensions 21.65" W x 16.34" D x 22.64" H(55 x 41.5 x 57.5 cm) Weight 35-40 lbs. (16-18 kg.) Power 100-240 V Rotation Speed 20-280 rpm Gjdpfx Agsma A Ivo Ssuh Flask size 50-4000 mL Max Flask Capacity 3kg Specifications, Heating Bath: Dimensions 11.22" W x 11.81" D x 9.45" H (28.5 x 30 x 24 cm) Weight 8.82 lbs. (4 kg.) Operating Voltage 100–120 Flask size Up to 4000 mL Controlled Temp Range 20–180°C Temperature Deviation ±2°C Bath Capacity 4 L

Condition: excellent (used), Optical Emission Spectrometer Ultima 2 benchtop unit, sequential spectrometer with a 1m monochromator, 2400 g/mm grating in first and second order, 160-800 nm without image Gusdszhkccepfx Ag Soh Rapid overview analysis IMAGE: Rapid overview analysis IMAGE NAVIGATOR for JY 2000-2, JY Ultima 2 or JY Ultima 2C External closed cooling circuit for cooling the RF coil of the Ultima 2 Argon humidifier – for the analysis of solutions with high salt content. ULTIMA 2 ICP-OES – Optical Emission Spectrometer Reliable, highly efficient 40.68 MHz semiconductor generator Complete and precise wavelength scan from 160 to 800 nm as standard Highest practical resolution

Condition: used, Instrument Systems Instrument Systems LED Measurement Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for the precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices come from a laboratory environment, manufactured in 2007–2008, and represent high-quality industrial measurement technology. Scope / included components CAS 140C-152 Spectrometer (2008) Integrating Sphere ISP250-110 + ISP250-211 (2008) LEDGON 100 Goniophotometer (2007) CSD315 3-axis Controller + Emergency Stop Control Panel (2007) Keithley 2611 SMU / SourceMeter PC system including software: Gujdpfx Ajzimaaog Soh SpecWin Pro SpecWin Light Goniometer module Original license CDs User manual “LED test sockets” Cables & accessories as shown in the photos Technical features Measurement of total luminous flux (lumens) Spectral analysis (color temperature, CRI, xy, spectrum) Goniophotometric angular measurement Analysis of radiation patterns Electrical control and IV measurements with Keithley 2611 Fully automatic measurement sequences with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating Sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Dimensions / weights (total approx. 40–45 kg) Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, HPLC Waters The system consists of the following modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow Control Modules Flow rate of 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates of 0.10 to 5.00 µl/min. Flow control module Flow rate of 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples, which it draws from microtiter plates or vials, into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard wash, or it can do so in less than 60 seconds, including a double standard wash. The sample manager accepts plates with standard footprint, 5.03” x 3.365”, which correspond to SBS/ANSI-compliant plates (maximum height of 2.2 inches, including covers). The sample manager can store samples at any temperature between 4 and 40 °C (39 and 104 °F) under ambient conditions of 25 °C (77 °F) or less. Heating and capture module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient temperature to 65 °C (149 °F). The column base can be pivoted outwards into any position between 0° and 180°. In the 0° “home” position, the column base is located directly above the sample manager Gjdpfx Aozg Tzxsg Seuh and can be connected to an optional optical detector. In the 180° “away” position, the analytical column can be connected to a mass spectrometer (on the right side of the system). The Synapt G2 is a Q-TOF-based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of the ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used not only for peptide identification (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Operating manual Condition: used Scope of supply: (See image) (Changes and errors in the technical data, information are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2018, Equipment: raster image processor, We offer this very good Konica Minolta AccurioJet KM-1 digital print machine, year of construction 2018. 27,2 million prints. It is placed at over plant in Szczecin in Poland. 27,2 million prints. It includes pallet feeder and delivery, Alwan colour server for creating ink saving print files, a Konica Minolta FD-9 photo spectrometer and a high tower sever rack with UPS for the rip hardware Its today dismantled and ready for transportation. Gedpfx Agsz Dtvuj Seuh If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Agilent 7000C GC/MS/MS Triple Quadrupole + 7890B GC + 7693 Autosampler – 2014 – lightly used – extensive accessories Gujdpfxjx A E D Dj Ag Seh For sale: a professional gas chromatography system with mass spectrometry from Agilent Technologies, model 7000C GC/MS/MS Triple Quadrupole, paired with an Agilent 7890B gas chromatograph and an Agilent 7693 autosampler. Year of manufacture: 2014 The unit has been used very little and is in very good visual condition. The system comes from a laboratory and is offered with a comprehensive set of additional accessories and numerous original Agilent Technologies accessories. System configuration: * Agilent 7000C GC/MS Triple Quadrupole – a high-end mass spectrometer with a triple quadrupole. * Agilent 7890B (G3440B) – gas chromatograph. * Agilent 7693 Autosampler – automatic sample injection system. * Edwards RV5 – laboratory vacuum pump with an oil mist filter. * Original CDs/DVDs with Agilent software. * A large number of additional accessories and Agilent laboratory equipment. Additional accessories: The package includes a comprehensive set of accessories, including: * Hoses and installation components for the chromatograph. * Components and accessories for the chromatographic oven. * Additional equipment for installing and operating the system. * Original Agilent Technologies laboratory accessories. * Software discs and additional equipment as shown in the photos.

Condition: used, Thermo Fisher Type: ARL easySpark metal analyzer Analysis: Tabletop spectrometer with PC, monitor, and software Thermo Scientific OXSAS 2.7 Software OXSAS is the most advanced software for optical emission spectrometers. Current analyses are displayed in tabs. Immediate processing of data sets using fill-down and increment-down tools. OXSAS is a multi-processing application with amazing capabilities and potential. The comprehensive functionality of OXSAS enables you to meet all your requirements. Technical machine description: Condition: fully functional In new condition Year of manufacture: Technical description of the system: The ARL easySpark metal analyzer is designed to meet the challenges and requirements of small to medium-sized facilities and laboratories in the metal industry that require high-quality, but cost-effective OES analysis for the production of parts for the automotive, aerospace, consumer goods, and other industries. The device is characterized by particularly high resolution thanks to a unique optical system based on a multi-grating/CCD (charge-coupled device) system. Other advantages of the Thermo Scientific ARL easySpark analyzer include: The ability to accurately analyze all elements, from trace amounts to percentages, in all metallic solid samples. A groundbreaking spark excitation and optical design to ensure the best performance in its class. Gsdpfsziar Nsx Ag Ssuh An intuitive, user-friendly Thermo Scientific OXSAS analysis software for a quick learning curve and easy routine operation. A robust and reliable design that requires minimal maintenance. Compliance with safety and quality guidelines. A simple design that is suitable for both new users in production and experienced laboratory personnel. The device is also ideally suited for other areas, such as metal recycling, academic and non-academic laboratories, and primary metal producers, where a cost-effective solution is needed for the analysis of metal products and materials for quality assurance and process control, or a second device is required. Power connection: 110-230 VAC, 50Hz or 60Hz Max. power: 600 VA Dimensions: Approx. L x H x D 0.80m x 0.45m x 0.70m Weight: Approx. 80 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, functionality: fully functional, Agilent 7500 Series G3155A Inductively Coupled Plasma Mass Spectrometer. Gujdeuaxzispfx Ag Soh The Agilent 7500 ICP/MS (Inductively Coupled Plasma Mass Spectrometer) is a cutting-edge analytical instrument known for its exceptional sensitivity and performance. With detection limits that go down to parts per trillion for most elements, the 7500 ICP/MS offers unparalleled sensitivity, enabling the accurate quantification of trace elements in various sample matrices. The instrument's wide dynamic range spans from sub-ppt to high ppm levels, accommodating diverse sample concentrations without compromising accuracy or precision. Capable of analyzing up to hundreds of samples per day, the 7500 ICP/MS provides rapid throughput, facilitating high-volume sample analysis in research, environmental monitoring, and industrial applications. Featuring robust interference removal capabilities and excellent stability, the instrument delivers highly accurate and precise quantitative results, ensuring confidence in analytical measurements. The Agilent 7500 ICP/MS is compatible with various sample introduction systems, including autosamplers and chromatographic interfaces, allowing for the analysis of complex sample matrices such as biological fluids, environmental samples, and geological materials. The Agilent 7500 ICP/MS is the instrument of choice for laboratories and research facilities requiring sensitive, fast, and quantifiable elemental analysis across a wide range of applications, including environmental monitoring, geochemistry, pharmaceutical analysis, and materials science. Good working condition. Please check out our other listings as well.

Year of construction: 2006, condition: as good as new (ex-display), machine/vehicle number: 4014, Mineralization system ASTORI - DIGI-6, KJELDAHL, model Digestor 67185 Description: The DIGI-6 Kjeldahl Digestion System allows the parallel digestion of up to 6 samples at the same time. Its strong and space-saving structure was studied to provide excellent heating efficiency and insulation. As a consequence, power consumption is reduced dramatically, meanwhile ensuring an optimized digestion procedure. The temperature is controlled by a digital thermal regulator: the selected value is kept with a surprising level of accuracy and precision; furthermore, the digital controller includes an over-temperature protection system. The provided rack allows quick handling of all digestion tubes, with its easy positioning and removal thanks to the practical lateral handles. The acid fumes are fully gathered by the glass caps and the acid-proof tubes, placed on the upper part of the equipment. The fumes are efficiently conveyed to the favourite fumes removing systems, such as a water jet pump or a scrubber: thus, the operator can choose to work outside the aspirating hood by easily connecting the DIGI-6 Kjeldahl Digestion System to an optional scrubber unit. The equipment can be used with up to 6 standard digestion tubes with 250 ml capacity, each. Upon request, a version for "Buchi" digestion tubes can be manufactured. Gjdpfefimhxex Ag Ssuh Advantages and technical features : - 6-place heater - External structure in stainless steel - Digital temperature controller - Temperature setting from room values up to 450°C - Over-temperature protection - Designed for the maximum operator"s safety - High heating efficiency and excellent insulation - Traditional 250 ml digestion tubes can be used - Supplied with a fumes gathering system - Easily connectable to a scrubber unit - Rack for the quick and easy handling of tubes (the tubes should be ordered separately) - Power Supply: 220 Volts/50 Hz - Absorption: 1000W • For Romanian companies, there is the possibility of selling in instalments. Price Euro 1.990 + VAT, Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale /Ne rezervăm dreptul la greșeli, modificări și vânzare. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, functionality: unexamined, machine/vehicle number: SX-50, Used Cameca SX-50 Electron Microprobe Guodpfxjwnb D Te Ag Seh Cameca SX-50 electron microprobe is used (Electron Probe MicroAlalyses). it has a 6” inch stage, 3 WDX Spectrometers with several Cristals LiF, PET, TAP, ODPb, PC1, PC2, PC3. Electron probe microanalysis (EPMA) are generally considered micro-analytical techniques which are able to image or analyze materials we can not generally observe with the resolution offered by visible techniques System is complete with all Books, service Manuals, Software and computer. Also many parts. 1 x Leybold Trivac D16B Vacuum Pump 1 x Alcatel 2012 A Vacuum Pump 2 x integrated Turbo Pumps

Condition: new, Year of construction: 2026, SUPERTOOTH jaw plate set for Pegson XA400S / XR400S and Powerscreen 400 / R400 This listing is for a complete set of SUPERTOOTH-profile jaw plates. The set is suitable for the following jaw crusher models: Pegson XA400S Pegson XR400S Gjdpfxez Dudye Ag Seuh Powerscreen 400 Powerscreen R400 The set consists of: Fixed jaw plate — part number CR005-068-001C, weight 1000 kg. Swing jaw plate — part number CR005-067-001C, weight 1100 kg. Material composition: 18% manganese, 2% chromium, balance iron. The chemical composition has been verified using a spectrometer. Price per set, EXW Poland. Worldwide shipping can be arranged. Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others.

Condition: new, Year of construction: 2026, We offer a complete set of SUPERTOOTH jaw plates for Powerscreen Premiertrak 300 and Powerscreen Premiertrak 330 jaw crushers. Fixed jaw plate — part no. CW017-002-MN180, dimensions 1300 × 973 mm, weight 656 kg, material composition 18% Mn / 2% Cr. Godpez Dt Tyefx Ag Sjuh Swing jaw plate — part no. CW017-001-MN180, dimensions 1339 × 963 mm, weight 669 kg, material composition 18% Mn / 2% Cr. Other jaw plate and liner versions are available on request. The parts can also be manufactured from an alloy containing 22% Mn / 2% Cr. Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others.

Condition: new, Year of construction: 2026, Mantle and bowl liner set for Metso HP200 STD This listing is for a complete set of wear cones for the Metso HP200 STD cone crusher. The set consists of: Bowl liner (outer cone) — part number N55208134-22, weight 550 kg. Mantle (inner cone) — part number N55308011-22, weight 482 kg. Material composition: 22% manganese, 2% chromium, balance iron. The components are manufactured from castings of the highest quality available on the market. Price per set, EXW Poland. Worldwide shipping can be arranged. Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! Gsdpfxjz Dulwj Ag Sjuh We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others.