Used Center Lathe New for sale (34,742)

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MC 0120, turning diameter over cross slide: 270 mm, spindle bore: 70 mm, turning diameter: 460 mm, turning diameter over bed slide: 460 mm, turning diameter over top slide: 270 mm, center height: 230 mm, turning length: 1,500 mm, feed length X-axis: 1,500 mm, total length: 3,045 mm, total width: 1,200 mm, total height: 1,450 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 60 rpm, type of input current: three-phase, overall weight: 2,700 kg, Colchester Mascot Gap Bed Lathe Model: Mascot 2000 Vari Speed Swing Over Bed: 460mm Swing In Gap: 730 x 216mm Distance Between Centres: 1500mm Spindle Speeds: 60-2000 RPM (variable) Spindle Bore: 76mm Motor: 11KW Hnodpfxszux Ele Ab Ijt Machine With: 300mm 3 Jaw Chuck 600mm Face Plate Digital Readout Quick Change Toolpost with Holders Dimensions: 3045 x 1200 x 1450mm high Weight: 2700 Kgs

Year of construction: 1968, condition: ready for operation (used), Offered is a lead and feed screw lathe. Swing diameter over bed 710mm, over carriage 480mm. Distance between centers 1000mm. Spindle bore 71mm. Speeds 18-800rpm (12 steps). Motor power 7.5kW. Machine weight approx. 3070kg. Equipped with Heidenhain digital readout, chip protection wall, splash guard, coolant system, and four-position tool post. Repaired and inspected prior to storage. Inspection possible by prior arrangement. Hodpfx Absx Th Nge Ijnt

Condition: good (used), turning diameter over cross slide: 200 mm, spindle bore: 32 mm, turning diameter over bed slide: 315 mm, center width: 600 mm, turning length: 560 mm, quill stroke: 140 mm, overall weight: 1,750 kg, Digital display, Heidenhain Collet system E163 Hnjdpfx Abjzzpx Nj Iot

Condition: new, Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, nominal power (apparent): 15 kVA, controller manufacturer: Fanuc, controller model: 0iMF, workpiece weight (max.): 800 kg, total height: 2,875 mm, total length: 4,090 mm, total width: 3,475 mm, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, distance table center to spindle nose: 150 mm, spindle motor power: 11 W, spindle nose: BT 40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 140 mm, tool weight: 800 g, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, An ECOM VL10i vertical machining center is immediately available. This is a NEW machine that has never been used in production and has never been installed at an end customer’s site. The machine was purchased in 2021 as part of a stock program designed to ensure immediate availability for customers. This is the last unit remaining in stock, available at our facility and ready for delivery without the usual lead times required for a new machine. The machine is supplied complete with: - 10.4" LCD monitor - BT40 direct drive spindle - 24-position tool magazine with swing-arm tool changer - spindle cooling system - 30 bar high-pressure system - refrigeration system Hjdjzcmhxjpfx Ab Ijnt - belt-type chip conveyor - rigid tapping

Condition: used, functionality: fully functional, spindle bore: 35 mm, well-maintained conventional lathe. Hnsdpfxjzzdnlo Ab Ijt

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 215 mm, spindle bore: 41 mm, turning diameter over bed slide: 380 mm, turning length: 1,000 mm, total length: 2,900 mm, total width: 1,050 mm, total height: 1,410 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 30 rpm, overall weight: 2,000 kg, Equipment: rotational speed infinitely variable, The lathe underwent a general overhaul in 2011 by M-MOOS spol. s.r.o. During the overhaul, it was fitted with an Omron Varispeed 7 frequency converter for convenient speed regulation during operation and to reduce current surges. The lathe's accessories include: a fixed and a movable steady rest, a faceplate, 2 chucks, a clamping angle, a rotating center for the tailstock (Morse 4), a micrometric stop for longitudinal and transverse feed, 1 coolant system with a pump, and an operating manual. Technical parameters: swing over bed 380 mm, swing over carriage 215 mm, distance between centers 1000 mm, bed width 340 mm, spindle bore 41 mm, spindle taper metric 50, tailstock center taper MORSE 4, spindle speed range 30 - 2800 rpm, main DC motor power 10 kW, maximum machine dimensions: length: 2900 mm, width 1050 mm, height 1410 mm, machine weight 2000 kg. The overhauled lathe was used for maintenance purposes by a large manufacturing company. The machine can be tested in our warehouse in Přerov by appointment. Hnjdjzy Shwopfx Ab Ijt

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with a new 3-axis digital readout and accessories. Original paintwork. Hnodpoyuyrusfx Ab Ist Machine No. 96-2374 with CE certification. Technical specifications: - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centers: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose: DIN 55027-5 with bayonet lock - Tailstock: Morse Taper 3 - Feed rates: from 0.016 to 0.5 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitch: from 0.18 to 28 mm - Weight: approx. 1100 kg - Switchable spindle brake - Required space: LxWxH 183 x 88 x 129 cm Accessories and equipment: - Rhom steel 3-jaw chuck - New collet set 5C 1-28 mm in 0.5 mm steps with new drawbar - New drill chuck 1-13 mm - Multifix toolpost with 4 steel holders - Bed stop - New live centre - Change gears - Faceplate - Coolant system - Chip guard - Spindle cover with emergency stop - German instruction manual

Condition: excellent (used), Lathe Hnjdpfxjzzrt Ns Ab Iot

Condition: good (used), Lathe Angelini MAS 160 (similar to Weiler Primus) Spindle speeds: 45-2840 rpm Three-jaw chuck: 140 mm Spindle bore approx. 35 mm Tailstock MK3 Distance between centers: 500 mm Hsdoy Ryrhopfx Ab Isnt Center height approx. 140 mm Coolant system 2 tool holders and various accessories (blue box) The machine has been inspected and runs perfectly

Condition: good (used), Year of construction: 1986, Muller lathe, model 1500 - Max. turning diameter: 700 mm - Distance between centers: 1500 mm - Bore diameter: 72 mm Hedpfezuvxcjx Ab Ient - Year of manufacture: 1986 - Rapid traverse rate on the Z-axis (cross slide)

Condition: good (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 1105, spindle bore: 48 mm, center height: 170 mm, total length: 1,800 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,500 kg, input voltage: 380 V, input frequency: 50 Hz, WEILER CONDOR B – Guide and Feed Spindle Lathe - Connection: 4 kW - Rated current: 9.5 A - Distance between centers: approx. 900 mm - Distance between centers above the bed: approx. 170 mm Hsdpfjztwwksx Ab Ient - Swing over bed: approx. 340 mm - Distance between centers above the carriage: approx. 90 mm - Swing over carriage: approx. 180 mm - Spindle bore: approx. 48 mm The machine is equipped with a tailstock, a Multifix tool holder, and a digital display from the manufacturer ACU-RITE. The machine comes from a training workshop; therefore, the guide and feed spindle are covered. FCA D-73235 Weilheim Teck – loaded onto a truck.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Weiler Praktikant 140 B Lead and Feed Screw Lathe with Toolroom Accuracy featuring NEW K&C 3-Axis Digital Readout! Technical Data: - Year of construction: 1989 Machine No.: 89-140-1471 - Centre height: 140 mm - Centre distance: 650 mm - Spindle speeds: from 24 to 2500 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock MK 3 - Feeds: from 0.02 to 0.63 mm/rev Hnjdpfjymdymsx Ab Iet - Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible - Metric thread pitches: from 0.25 to 8 mm - Weight: approx. 680 kg - Spindle brake, selectable - Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: - NEW K&C 3-axis digital readout, 12 months manufacturer warranty and operating manual Functions: switch mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool library for 200 tools, taper calculation, radius/diameter indication, quick zeroing, count direction switching - NEW collet system with collets from 3 to 25 mm, 1 mm increments - Three-jaw chuck, 160 mm, with 1 set of jaws - Multifix size A with 2 tool holders - Face plate - Bed stop - Rear cover - Machine feet - Electronic spindle guard - Operating manual Safety features: Electronic spindle protection, lead and feed screw cover, 2 emergency stops, spindle brake, electronic change gear guard About the machine: For sale is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This well-maintained lathe comes from a training workshop. All slides operate smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-like surface finishes. Take the opportunity to view and test this machine under power on site to verify its condition for yourself.

Condition: reconditioned (used), Colchester Triumph 2000 x 50” Gap Bed Centre Lathe Height of Centres 190mm Max’ Distance Between Centres 1250mm Max’ Swing over Bed 390mm Max’ Swing over Cross Slide 240mm Max’ Swing in Gap 580mm Spindle Bore 54mm Spindle Nose D16 Camlock Spindle Taper in Bush No.4 Morse Spindle Speeds 25 - 2000 rev/min Tailstock No.4 Morse 3 Phase Electrics 7.5hp Motor Supplied with: Hnodpfxszzxxfe Ab Iet 3 Jaw Chuck Digital Readout Quick Change Tool Post This machine is an ex-university machine and is in excellent condition overall.

Condition: good (used), Year of construction: 1989, functionality: fully functional, Wagner DCG 160 precision guide and lead screw lathe – year of manufacture 1989 Technical data Manufacturer: Wagner Maschinen Model: DCG 160 Year of manufacture: 1989 Swing over bed: 160 mm Maximum turning diameter over bed: approx. 320 mm Distance between centers: approx. 750–1,000 mm Speed range up to approx. 2,000 rpm Guide and lead screw Hsdpjzhitysfx Ab Isnt Longitudinal and cross feed Threading unit 380 V Equipment 3-jaw chuck Quick-change tool holder Tailstock Work light Coolant system Description Robust German precision lathe for toolmaking, maintenance, training, and the production of individual parts. The machine is in good used condition and is fully equipped. Ideal for workshops, training centers, or general mechanical engineering.

Condition: good (used), turning diameter over bed 280 mm turning diameter over slide rest 170 mm Hsdpfx Aboyz Dg Ro Isnt turning length 600 mm weight of the machine ca. 400 kg spindle passage 26 mm speeds 55-2000 U/min total power requirement 1,4 kW dimensions of the machine ca. 1,5 x 0,8x 1,3 m Including EMCO SOD grinding support Including EMCO 4-jaw chuck Including machine feet Including change gears

Condition: good (used), Used 2-meter lathe from Colchester Hnedpozi Salefx Ab Ist Type: Mastiff 1400 Turning length: 2000 mm Turning diameter over bed: 540 mm Spindle bore: 89 mm Includes 3-jaw and 4-jaw chuck Includes steady rest 2-axis digital readout

Condition: reconditioned (used), Lead and feed spindle lathe Kern Hodpfx Aey H Eckjb Isnt Type / Model: D 20 A Condition: Overhauled Technical data Center height: 215 mm Distance between centers: 600 mm Spindle bore: 50 mm Bed width: 300 mm Spindle speed (24): 31.5 - 1400 1/min Motor power: 4 kW Quill travel: 150 mm Weight: approx. 1500 kg Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: - Geometry protocol - 3-axis digital display - Emergency stop button - Quick-change tool holder system Multifix - Machine light - Coolant system - Follower center

Condition: ready for operation (used), Optimum lathe D330 x 1000 SG -Distance between centers: 1000 mm -Swinging diameter over bed: 330 mm -Swinging diameter over cross slide: approx. 190–200 mm -Spindle bore: approx. 38 mm -Speed range: approx. 70 – 2000 rpm (stepped) Hodsztdv Tjpfx Ab Ijnt -Feeds: longitudinal and cross, automatic -Thread cutting: Metric / Inch -Motor power: approx. 1.5 – 2.2 kW -Voltage: 400 V / 3 phases -Tailstock: MK3 -Spindle: MK5 -Work light -Three-jaw chuck -Multifix system with 1 steel holder -Machine feet -Chuck guard Dimensions: L x W x H 1.9 x 0.7 x 1.5 meters / Weight 700 kg

Condition: good (used), For sale is the lathe shown in the pictures, manufactured by the Chinese company Sumore, model SP2114. I rate the condition of the machine as very good. It has high rigidity and accuracy. The machine is connected and ready for operation. We provide on-site machine loading. Spindle bore: 58 mm Lathe chuck: 250 mm Turning length: 1500 mm Turning diameter over the bed: 460 mm Turning diameter over the carriage: 260 mm Tailstock spindle: MK 4 Minimum speed: 25 rpm Maximum speed: 2000 rpm 12 spindle speeds Hnjdpfszqt Dzex Ab Iot Steady rest: fixed and traveling

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 76 mm, turning diameter: 800 mm, GURUTZPE Super AT 400/5000 lathe, with a 5,000 mm + 1,000 mm distance between centers, 820 mm swing over the bed, 550 mm swing over the cross slide, 1,150 mm swing over the tool rest, 76.5 mm spindle bore, 24 speeds from 9-500 rpm. It has a fixed steady rest and is equipped with a 3-jaw universal chuck with a diameter of 400 mm. It also comes with a separate 4-jaw independent chuck with a diameter of 600 mm. Overall, it is in good condition. Hjdpfxozmp Afs Ab Ijnt

Condition: used, functionality: fully functional, spindle bore: 60 mm, total length: 2,600 mm, type of input current: three-phase, spindle mount: MK 5, Equipment: rotational speed infinitely variable, Well-maintained and stable Cazeneuve HBX590 center lathe 1000 mm between centers Turning diameter above the bed: 580 mm Spindle bore: 60 mm Tool holder: MK5 Motor: 11 kW Speed control via Facom frequency inverter with speed control on the dashboard. Hnodpjz Ar A Tofx Ab Ijt Includes the following accessories: Fixed steady rest Protective guards (prevents coolant from dripping onto the floor) Machine lamp Coolant system Axial stop for the main spindle Acurite digital readout Hydraulic system cleaned and fluid replaced in 2025. Comes with the original tool holder. A multifix C can be included for an additional charge. Make a good offer and this versatile lathe can be yours! If you have any questions or would like more information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 1986, Available immediately from a workshop for disabled people: L & Z lathe, Imatec Type ID 175 Year of manufacture 1986 Center height 175 mm Diameter over bed 350 mm Diameter over carriage 210 mm Distance between centers 1000 mm Hnsdpfxezygguo Ab Iet Spindle bore 41 mm Spindle speeds 35.5 – 1600 rpm Digital display Chuck Faceplate Multifix with holders Coolant system Drive power 3 kW Weight 1700 kg Price: EUR 1,750.00 plus VAT, ex works.

Condition: good (used), Year of construction: 1976, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 65 mm, turning diameter: 480 mm, turning length: 1,000 mm, total length: 3,400 mm, total width: 1,000 mm, total height: 1,500 mm, spindle speed (max.): 2,240 rpm, type of input current: AC, overall weight: 3,500 kg, For sale is an L+Z lathe manufactured by VDF Boehringer. The machine is in good condition and can be inspected and tested upon request. Manufacturer: VDF Boehringer Göppingen Type: D 480 Year of manufacture: 1976 Swinging diameter over bed: 480 mm Swinging diameter over cross slide: 280 mm Turning length: 1000 mm Power feed Spindle bore: 65 mm Maximum speed: 2240 rpm Bed width: 310 mm Dimensions (L x W x H): 3400 x 1000 x 1500 mm Weight: approx. 3 tons Includes various Multifix tool holders and accessories. Hodpszu I A Tsfx Ab Ijnt Free loading onto a truck.

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, We are selling this lathe, already dismantled and stored in the warehouse. Fully functional; a video of the machine can be sent via WhatsApp. Swing over bed: 1080 mm Swing over support: 720 mm Distance between centers: 9000 mm Minimum turning diameter: 20 mm Spindle speed: 1.8 – 355 rpm Main drive power: 40 kW Workpiece weight: 10 t Hnsdpfjy I Ifwjx Ab Ist

Condition: good (used), functionality: fully functional, Scope as per image. Infinitely variable speeds up to 3,000 rpm. Hsdpfxez Alfhe Ab Ient