Used Cfm Nilfsik 118 for sale (418)

Condition: new, machine/vehicle number: a3b1347da4aa7f31dceb875db, empty load weight: 2 kg, maximum load weight: 9 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle trailer Welded fine-grained steel construction 6 pairs of lashing eyes bolted to the outside of the floor/outer frame, 5 tons each Front gear support leg Folding rear support 2 wheel chocks with holder Steel underride guard Rear spray flaps across the entire width Quarter-shell mudguards Towing device central axle trailer Towbar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension BPW drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Floor Steel/ checker plate floor for high point load capacity Note: Slight floor corrugation possible due to welding distortion! Platform length approx. 5,200 mm Rear sloping to approx. 900 mm Front wall / front corner stanchions 25 mm aluminum hollow profile, 320 mm high, Drop sides 25 mm aluminum hollow profile, 320 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions attached to the frame and with bracket for locking the drive-on ramps, drive-in width approx. 2,430 mm Drive-on ramps 2 steel ramps 2 300 mm long, 510 mm wide, can be moved sidewayswith grab handle on the ramps covered with wood With gas pressure jack for one-man operation Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray10-year warranty against rusting through Front wall aluminum Dujdpsi Ri Iljfx Aa Not Side wall anodized aluminium Drive-on ramps Hot-dip galvanized Attention: Archive pictures!

Condition: new, machine/vehicle number: bdf30cb8a53c70e900bdb40a7, empty load weight: 2 kg, maximum load weight: 9 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: -, Further information Chassis central axle tipping trailer Welded steel construction, continuous tipping shaft at the rear with 80 mm ball tipping bearing Gearbox support foot at the front 2 wheel chocks with holder Steel underride guard Rear splash guards across the entire width Quarter-shell mudguards Lockable storage space for access ramps underneath the loading area Towing device central axle trailer Tow bar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension BPW drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Hand spindle parking brake Integral air reservoir ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 swap-proof coupling heads at the front, with connecting cables to the motor vehicle, Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable, Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with lift limiter and safety cable, Dusdsi Riwispfx Aa Not Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this must be retrofitted to the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Hydraulic actuation via truck power take-off Tilting bridges Sturdy tipper body with 4 mm sheet steel floor, steel side wall structure, continuous side walls, hinged and pivoted with central locking at the bottom. Rear corner stanchions pluggable. Rear wall can be folded down and pivoted, with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 hinges at the bottom. Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Dropside/bridge RAL 3002 carmine red Rear support, access ramps, storage box are optionally available at extra cost Attention: Archive pictures

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, center height: 130 mm, grinding length: 575 mm, grinding diameter: 125 mm, pivoting range: -90 °, spindle bore: 38 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Largest grinding diameter with set blocks: 125 mm Largest grinding diameter without set blocks: 250 mm Dedpfxjvt S Dio Aa Neut Maximum grinding length: 575 mm Centre height: 130 mm Spindle speed (grinding spindle): 1,150/1,460 rpm (2 levels) Workpiece spindle Spindle bore: 38 mm Head swivel: -90° Workpiece weight: 75 kg Table Table swivel: ±12° (total 24°) Longitudinal table movement: 4 - 710 mm Grinding wheels Maximum grinding wheel diameter: 500 mm Maximum grinding wheel width: 60 mm Grinding wheel bore: 127 mm Holder diameter: 127 mm Flange diameter: 190 mm Cone diameter: 60 mm MACHINE DETAILS Area required: 3.28 x 3.0 x 1.5 m Weight: 2,700 kg Main drive: AEG AM 134 MV4 W1 Workpiece spindle drive: AEG AM 90 S6 W1 Coolant pump: AEG TP 44/270 Voltage: 220/380 V Frequency: 50 Hz EQUIPMENT - Grinding headstock with fixed disk - Workpiece headstock for internal and external grinding - Coolant pump and lubricating oil pump - V-belt drive - Extensive documentation

Condition: used, 🧰 Product features • Condition: used, see photos • Colour: galvanized • External dimensions: 1181 x 1093 x 40 mm • Internal clearance: 1116 mm • Load capacity: 500 kg / m² • Weight: 14.7 kg • Mesh size: 43 x 65 mm 💰 Price €32,- net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: available immediately • Inspection and collection: possible anytime by prior arrangement Constantly over 5,000 linear metres of pallet racks from various manufacturers in stock Dsdpfxex Exnqs Aa Njut (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our General Terms and Conditions, all prices excl. VAT ex stock.)

Condition: refurbished (used), Year of construction: 2014, operating hours: 2,187 h, load capacity: 1,800 kg, lifting height: 122 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,350 mm, fork length: 1,150 mm, empty load weight: 334 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically overhauled according to FEM-4.004 and the latest safety standards—for maximum quality and your safety. From the frame to the battery, including drive, brakes, steering, and electrics—every vehicle is thoroughly inspected and refurbished. ✔ Made in Germany—with responsibility and precision ✔ Strict technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support—even after purchase Test on site and get individual advice—we’ll find the right solution for you. Industrial truck data: Manufacturer: Jungheinrich Model: Low lift pallet truck EJE 118 Drive type: Electric Load capacity: 1,800 kg Year of manufacture: 2014 Djdexnk D Hspfx Aa Neut Operating hours: 2,187 Lift height: 122 mm Mast type: None Initial lift: Yes Length: 1,800 mm Width: 800 mm Height: 1,350 mm Fork length: 1,150 mm Unladen weight: 334 kg Load center: 600 mm Tyres: Polyurethane Model type: EJE 118 Battery type: PzS Battery weight: 222 kg

Condition: new, machine/vehicle number: e77e603e96d0ea4194a7f7661, empty load weight: 3,000 kg, maximum load weight: 8,800 kg, overall weight: 11,800 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle trailer Welded fine-grained steel construction 5 pairs of lashing eyes bolted to the outside of the floor/outer frame, 3 tons each 2 pairs of lashing eyes additionally bolted to the floor, 5 tons each in the corners Gear support foot at the front Folding rear support 2 wheel chocks with holder Galvanized steel underride guard Rear spray flaps across the entire width Quarter-shell mudguards Towing device central axle trailer Towbar with tested 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 250 mm Axles + suspension GFA or BPW drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system Dodpfxsi Riv To Aa Nsut 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Floor Steel/ checker plate floor for high point load capacity Note: Slight floor corrugation possible due to welding distortion! Platform length approx. 5,200 mm Front wall / front corner stanchions 25 mm aluminum hollow profile, 320 mm high, steel corner stanchions in volume design Drop sides 25 mm hollow aluminum profile, 320 mm high, hinged and removable, subdivided with 1 pair of plug-in middle stanchions Rear wall / rear corner stanchions 1 pair of steel stanchions attached to the frame and with bracket for locking the drive-on ramps, drive-in width approx. 2,430 mm Drive-on ramps 2 steel ramps 3 100 mm long, 510 mm wide, divided lengthwise, can be moved sidewayswith grab handle on the ramps covered with wood With gas pressure jack for one-man operation Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray 10-year warranty against rusting through Front wall/side wall anodized aluminium Centre stanchion DB 7350 nova grey Hot-dip galvanized drive-on ramps Attention: Archive pictures!

Condition: repair required (used), Year of construction: 2008, machine/vehicle number: 118009950, functionality: not functional, feed length X-axis: 2,450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 280 mm, spindle speed (max.): 18,000 rpm, No reserve price – guaranteed sale to the highest bidder! Condition: The machine has always been maintained but now has a software error. TECHNICAL DETAILS X-axis travel: 2,450 mm Y-axis travel: 350 mm Z-axis travel: 280 mm Feed rate: 30 / 15 / 15 m/min Spindle Spindle speed: 18,000 rpm Spindle power: 3 kW Dodpfxowu Ekqj Aa Neut Working area Max. machining length: 2,400 mm Compressed air Compressed air connection: 7 bar MACHINE DETAILS Length: 3,100 mm Depth: 1,650 mm Height: 2,250 mm Weight: 1,227 kg Voltage: 400 V, 3~, 50 Hz Connected load: 8 kW

Condition: used, empty load weight: 3,500 kg, maximum load weight: 8,300 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 10/2009, loading space length: 6,200 mm, loading space width: 2,440 mm, loading space height: 3,000 mm, suspension: air, tire size: 235/75R17,5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, tarpaulin and bows, 2-axle, tandem, air-suspended, lifting+lowering, ABS (anti-lock braking system), Edscha, lashing eyes, U-protection, front support, rear support, height-adjustable drawbar Body: Flatbed + tarpaulin Trailer for glass transport with Edscha canopy Tires approx. 50% ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Duodpfxoi Rpx No Aa Not - .

Condition: used, machine/vehicle number: 11209, Year of construction: 2010, operating hours: 3,850 h, load capacity: 1,800 kg, load center: 600 mm, construction height: 1,300 mm, fork length: 1,150 mm, overall weight: 546 kg, enginetype: Electric, manufacturer: Jungheinrich Dodpfoxubfujx Aa Njut

Condition: new, Tanos Systainer - 118 pieces - printed with Festo lettering Dujdsw Upnljpfx Aa Net - approx. dimensions - External dimensions H 112 x W 396 x D 296 mm - Internal dimensions H 71 x W 389.5 x D 275 mm - Shipping available at extra cost

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,177 h, machine/vehicle number: 10067745, empty load weight: 205 kg, construction height: 1,400 mm, fuel type: electric, drive type: Elektro, working height: 2,997 mm, Vertical lift Chassis number: 10067745 Condition: Ready for use and fully functional Technical condition: good Djdsuhwm Hspfx Aa Nsut Battery Volt: 24V Battery Ah: 219Ah Description: Crown WAV 60-118 No.: C Year of construction: 2018 Operating hours: 2,177 The device is visually and technically in good condition. Charger on request Fast and uncomplicated transport possible by arrangement! The advertisement only serves to identify the device! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. All used goods are sold without warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site.

Condition: excellent (used), Year of construction: 2016, Debus DDS 118 / 5/ 23 chip industrial vacuum cleaner 6 bar 4,6 m³/min 278 Manufacturer: Debus Model: DDS 118 full name: DDS 118 / 5/ 23 chips Duedpfx Aoivd A Uea Net Year of manufacture: 2016 Make No.: 278 operating pressure: 6 bar suction capacity: 4,6 m³/min Air requirement: 1,3 m³/min weight: approx. 30 kg Capacity: approx. 40 liters Dimensions: 55 cm long, 60 cm wide and 150 cm high Condition: used Scope of delivery: see pictures Complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines More items - new and used - you will find in our store! International shipping costs on request!

Condition: new, Year of construction: 2025, lifting height: 10,000 mm, empty load weight: 3,250 kg, All-terrain scissor lift; aerial work platform; tracked aerial work platform; lifting platform; lifting platform with outriggers Model: CFPT0815LDS Load capacity: 450 kg Platform extension load capacity: 113 kg Platform dimensions: 2.27 x 1.11 m Platform extendable by +0.90 m Transport dimensions: 2.77 m x 1.50 m Height: 2.46 m Height with guardrails folded down: 1.87 m Weight approx.: 3253 kg Working height: 10 m Platform height: 8 m Gradeability up to: 30% Drive via battery: 8x6V / 240 Ah Integrated charger: 48V/40A Outriggers with automatic level compensation. Duedpovv Egisfx Aa Not Non-marking, bright rubber tracks German operator's manual included 2-year manufacturer's warranty Other sizes with wheel and track drive available. For further data, offers, or availability, please enquire. Due to EU regulations, this offer is exclusively for business customers. Depending on availability, the machine can be inspected and test driven at our warehouse. Subject to prior sale. All information without guarantee. The machines can be collected by the buyer or shipped via freight carrier at the buyer's expense. Loading or packaging can be organized by us. Shipping costs are estimates; depending on distance and unloading options, these may vary. Please enquire for details.

Condition: new, Year of construction: 2025, load capacity: 240 kg, lifting height: 7,600 mm, platform length: 1,370 mm, platform width: 700 mm, empty load weight: 1,260 kg, transport length: 1,540 mm, transport width: 810 mm, transport height: 1,830 mm, construction height: 2,190 mm, Scissor Lift Platform; Work Platform; Lifting Platform; Hydraulic Platform Model: CFPT0608DC Load capacity: 240 kg Platform extension load capacity: 100 kg Platform dimensions: 1.37 x 0.7 m Platform extendable by +0.60 m Transport dimensions: 1.54 m x 0.81 m Height: 2.19 m Height with guardrail folded: 1.83 m Weight approx.: 1260 kg Working height: 7.6 m Platform height: 5.6 m Gradeability up to: 25 % Drive: Battery-powered, 4x12V / 115 Ah Integrated charger: 24 V / 15 A German operating manual included 2-year manufacturer’s warranty Non-marking, light-colored tires Djdpfevv Ekhsx Aa Nout Additional demonstration units from the trade fair available (see photos). Other sizes with wheel or tracked drive available. For additional data, quotes, or availability, please inquire. Due to EU regulations, this offer is directed exclusively at business customers. Depending on availability, the machine can be viewed and test-driven at our warehouse. Subject to prior sale; all information provided without guarantee. Machines can be picked up by the buyer or shipped via freight carrier at the buyer’s expense. Loading and packaging can be organized by us. Shipping costs are indicative and may vary depending on distance and unloading options; please inquire.

Condition: new, Year of construction: 2025, overall weight: 2,930 kg, Scissor Lift Platform; Work Platform; Lifting Platform; Aerial Work Platform Model: CFPT1012 Load Capacity: 320 kg Platform Extension Load Capacity: 113 kg Platform Dimensions: 2.27 x 1.11 m Platform Extendable: +0.90 m Transport Dimensions: 2.48 m x 1.21 m Height: 2.48 m Height with Rails Folded Down: 1.92 m Weight approx.: 2,932 kg Working Height: 12 m Platform Height: 10 m Gradeability up to: 25% Powered by Battery: 4x6V / 240 Ah Integrated Charger: 24 V / 36 A German operating manual included 2-year manufacturer's warranty Non-marking light tires These are exhibition machines from BAUMA in Munich 2025. Other sizes with wheel or crawler drive available. For further data, offers, or availability, please inquire. Due to EU regulations, this offer is addressed exclusively to businesses. Depending on availability, the machine can be inspected and test driven at our premises. Subject to prior sale. All information is provided without guarantee. The machines can be collected by the buyer or shipped by freight forwarding at the buyer's expense. Loading and packaging can be organized by us. The shipping costs are indicative; they may vary depending on distance and unloading options, please inquire. Dsdpfxevv Eh Hs Aa Neut

Condition: new, Year of construction: 2026, load capacity: 230 kg, lifting height: 17,700 mm, platform length: 1,340 mm, platform width: 2,000 mm, overall weight: 7,550 kg, transport length: 6,800 mm, transport width: 1,900 mm, transport height: 2,100 mm, fuel type: electric, Articulating Telescopic Work Platform CFMG Model: CFBA16E Load capacity: 230 kg Platform dimensions: 2.0 x 1.34 m Platform rotation: 160° Transport dimensions: 6.8 m x 1.9 m Height: 2.1 m Weight approx.: 7,550 kg Working height: 17.7 m Platform height: 15.7 m Max. outreach approx.: 9.3 m Gradeability up to: 30° Overload cut-off: Yes Proportional AC drive Driven by 48 V / 340 Ah battery Lithium-ion battery Integrated charger 48 V / 60 A 230 V power supply to platform Non-marking light-colored tires (different from shown, the machine will be delivered with light-colored tires) German operating manual included 2-year manufacturer’s warranty Images show an identical machine. This is a trade fair demonstration machine for the APEX exhibition in Maastricht from 02 to 04 June 2026. Dusdsyvyhaepfx Aa Net After the trade fair, the machine is available directly from Maastricht or can alternatively be collected in 94244 Teisnach. Please note the machine will only be available from June. Other sizes as well as scissor lifts with crawler or wheeled chassis available. For further data, offers, availability and delivery times, please inquire. Per EU regulations, this offer is intended exclusively for business customers. Interim sale reserved. All information without guarantee. The machines can be collected by the customer or shipped by freight forwarder at the buyer’s expense. Loading and packaging can be organized by us. Shipping costs are indicative, and may vary depending on distance and unloading options – please ask for a quote. The sales price stated is the net price (excluding VAT). An invoice with VAT shown will be provided. Manufacturer warranty 2 years: Spare parts are partly available from our stock. For used items, warranty is 12 months if the buyer is a consumer as per §13 BGB. If the buyer is a business as per §14 BGB, all warranties are excluded. For new items, warranty is 24 months if the buyer is a consumer according to §13 BGB. If the buyer is a business as per §14 BGB, warranty is 12 months.

Year of construction: 2024, condition: used, General information Field of application: Grounds care Serial number: LCELV1ZD0R6000133 Technical information Power: 52 kW (71 HP) Type of fuel: Petrol Weights Empty weight: 870 kg Carrying capacity: 1.550 kg GVW: 2.420 kg Dsdpfxotzixpj Aa Neut Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: - Front tyre size: - Rear tyre size: - Transport dimensions (LxWxH): 3.77x1.62x1.85 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), Weishaupt WM-L20/1a. 1400kw. 118kg/h year.2008 Dodpfeig Tw Njx Aa Nsut

Condition: new, sheet width 2550 mm 4 mm sheet thickness for stainless steel 2 mm rear stop 750 mm total power requirement 7,5 kW weight of the machine ca. 3050 kg dimensions 3300 x 2230 x 1360 mm Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades Dsdjyyc Azepfx Aa Njut - 750 mm motorized, digitally adjusted backgauge with ball screws recirculating ball screws - Manual blade gap adjustment system - Mechanical sheet clamping system with plastic base - Work table with insert plates - foot switch for single and repeat cutting cycles - 1 x squaring arm 1000 mm long with metric scale - 2 x 800 mm front material support arms - Front stop - Finger protection - front and rear covers - Rear light guards - CE declaration of conformity Youtube video link: ?v=pCuKwtBIQto&ab_channel=BaestleinGmbH

Condition: new, Siemens 6SN1118-0DM31-0AA1 control module version B, serial number as per photo, unused, 100% functional, scope of delivery as per photos. Dujdpfxsxahdbe Aa Nst

Condition: ready for operation (used), Siemens 6EW1811-8AA built-in power supply A5E00166828, serial number: Q6X2851248, as new, in good condition, 100% functional, scope of delivery as shown in photos. Duedpfxsy Nr Dgj Aa Net

Condition: ready for operation (used), Sillmann EDM LCD12L-CACS-SIL monitor from AGIE machine SN: 1183, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Dodpfx Aji D Tvcea Njut

Condition: ready for operation (used), Siemens 1FT5064-1AF71-3AA0 AC-VSA motor SN:YFM511874901001, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Dsdoi D Sbkepfx Aa Nsut

Condition: new, Heidenhain LS 486C ML 520mm linear scale ID: 329 991-18 SN:10072911, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Djdpfx Aajy Nqinj Nsut

Condition: ready for operation (used), SEW Eurodrive CFM71S/TF/RH1M/SM50 SN:01.1229434704.0001.08 , professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos, For this item, the agreed sales discounts do not apply. Price please ask separately! Dusdpfx Aei D N Nzja Net