Used Chainsaw + Drilling And Milling Machine for sale (70,320)

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG Hnodpfxjzg H H Ij Abhsp

Condition: like new (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, machine/vehicle number: F9B192402, feed length X-axis: 450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, quill travel distance: 80 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, total height: 1,990 mm, total width: 2,030 mm, total length: 1,980 mm, table width: 270 mm, table length: 400 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, table load: 450 kg, overall weight: 2,270 kg, input voltage: 400 V, workpiece weight (max.): 450 kg, input current: 16 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, EMCOMAT FB-450 MC with Sinumerik 828D Contouring control with “manual Machine” Universal Milling- and Drilling-Machine with Sinumerik 828D Contouring control and hydraulic tool clamping working area X450/Y350/Z400mm 7/10kW power Spindle speeds from 10-5000 U/min feeds from 10-5000 mm/min rapid traverse up to 5000 mm/min toolmaker accuracy DIN8615 tool clamping acc. DIN 69871 SK40 including:  linear guides  ball screws  vertical milling head +/-90° swivelling with 80mm sleeve stroke  swivel device for vertical milling head  hydraulic tool clamping  coolant equipment  LED-machine lamp Hnodpjxapdcsfx Abhop  automatic central lubrication  rigid angle table 800x400mm  chip box  operating tools  dokumentation  executing with open work area protection (mode3)  controlled and manual version in one mashine  Sinumerik 828D Contouring control incl. Control unit in 3-Axis with ballsrews and servodrives, Conversational cycles entry with grapfic support: Drilling cycles for drilling, pecking, reaming and tapping on linear and circular hole patterns, Milling of rectangular and circular pockets and studs, Slot milling cycle, Face milling cycle, ... USB Interface,

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Hnsdeyxy S Repfx Abhop Very good condition

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 14008455, Fehlmann Picomax 54 model with Heidenhain TNC 320 control, in very good condition. Technical specifications: - Year of manufacture: 2008 - Travel in X, Y, and Z axes: 500/260/480 mm Hodpszgwiysfx Abhsnp - Travel of the drilling spindle: 160 mm - Table dimensions (L x W): 880 x 320 mm - Maximum table load: 250 kg - Distance from table to spindle nose: 0 - 605 mm - Feed rate in X/Y: 1 - 2000 mm/min - Feed rate in Z: 1 - 1200 mm/min - Rapid tool change system: SF 32 - Spindle speed range, infinitely variable: 7100 rpm - Machine dimensions (W x D x H): 1850 x 2550 x 2400 mm - Weight: 2150 kg Accessories: - Heidenhain TNC 320 control - 4th axis with tailstock and Rohm 140mm 3-jaw chuck - Various holders - Microscope - Heidenhain probe - Machine lamp - Cooling system

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 410 mm, spindle speed (max.): 2,400 rpm, spindle speed (min.): 120 rpm, type of input current: three-phase, table length: 670 mm, table width: 300 mm, Sixis S-103-R 3-phase 380V motor is running smoothly. 9 spindle speeds adjustable from 120 to 2400 RPM. Power feed on the X and Z axes. Infinitely adjustable feed rate. Axis travel: X: 450mm Y: 170mm Z: 410mm Table can also slide over the apron. Table size: 670x300mm Head can be adjusted in degrees. ISO30 spindle mount. Coolant pump in the machine base. Overall dimensions: 115x110x150cm Swiss-made machine tool. Includes accessories as shown in the pictures! Hodpfx Abswbkpfshsnp Contact us for shipping options! € 4,400.00

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 250 mm, feed length Z-axis: 160 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 480 mm, spindle speed (max.): 9,000 rpm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 1 m/min, spindle speed (min.): 100 rpm, quill stroke: 160 mm, table width: 320 mm, table length: 880 mm, X-500, Y-250 , Z- quill stroke 160 , W- traverse path machine head 480 , table 880 x 320 , max. 320 kg , fixture SF 32 , 100-9000 rpm , 5 kW , 60 Nm , Heidenhauin TNC 124 Hedpfx Abjq R Rb Hjhonp Many accessories

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,000 rpm, controller model: DIXI CNC 4400, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 1,000 mm Vertical movement with pallet changer (Y-axis): 880 mm Distance from spindle axis to top of table: 0 – 1,000 mm Distance from spindle axis to top of table with changer: 0 – 880 mm Table dimensions without changer: 840 x 1,000 mm Table dimensions with standard changer: 800 x 800 mm Max. table load: 2,000 kg Max. table load with pallet changer: 1,200 kg Hnjdpfx Abezd Rizehop Table rotation: 360° continuous Rapid traverse: 1,500°/min T-slots: 7 equally spaced slots, width 18 H7 Tool interface: ISO 50 Spindle speeds: 8 – 3,000 rpm (in 3 ranges) Drive power: 11 kW Drive power in overload: 13.75 kW Max. torque: 200 kpm Working feed rates (X, Y, Z): 1 – 9,999 mm/min Rapid traverse (X, Y, Z): 9,999 mm/min Measuring system resolution: +/- 0.001 mm / 0.001° Positioning accuracy: 0.001 mm / 0.001° Distance from table axis to spindle flange: 390 mm to 1,390 mm MACHINE DETAILS Control system: DIXI CNC 4400 Installed total power: 47 kW Compressed air requirement: 6 kg/cm² Dimensions & Weight Dimensions (L x W x H): 4,835 x 4,160 x 3,190 mm Machine weight: approx. 17 t Compressed air requirement: 6 kg/cm²

Condition: like new (used), Year of construction: 2025, operating hours: 120 h, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 4,000 rpm, feed rate X-axis: 25 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, spindle speed (min.): 140 rpm, Equipment: rotational speed infinitely variable, Our demonstration machines at a great price: MDX-60 milling and drilling center, travel range X-axis 6300 mm, and MDX 20, travel range X-axis 2050 mm. Efficient CNC technology for economical component machining. Why use expensive and complex CNC machines with complicated standard CNC controls for these parts, or continue to rely on manual, time-consuming processes such as marking, center punching, and drilling?  No CNC knowledge is required thanks to a user-friendly interface.  There is no easier-to-use CNC milling/drilling machine.  Even with just one hole, the machine is faster than manual operation.  Up to 80% time savings.  Graphical display of the programmed parts on a 21” screen.  Long parts can be fed through using a follow-up program.  Import of DXF and DSTV data directly from the CAD system.  High process and repeatability reliability.  Parts can be programmed after only a few minutes of instruction. Why make it complicated when it can be more efficient? The MDX center is a robust, clearly structured machine with minimal follow-up costs. An investment that pays for itself from the very first component. A cost-reducer for every metalworking company. Our great price for these demo machines, directly from us as the manufacturer in Bavaria: Hodpfozdb Nmex Abhonp MDX 20: €63,500.00, including delivery MDX 60: €91,000.00, including delivery Validity: while supplies last. Arrange a demonstration appointment in Arnstorf or request our offer.

Year of construction: 1987, condition: good (used), max. drilling and milling diameter 20 mm maximum drilling depth 180 mm the largest drilling length 180 mm table surface dimensions (length / width) 280/600 mm the greatest distance from the table surface to the spindle axis 130 mm spindle speed 2800 rpm. engine power 2.2 kW Hsdpfx Aboiduhzjhenp air demand for sawdust extraction suction 300-350 m3 / h air speed in the extraction system 19-22 m / s squeegee tip connection diameter 80 mm dimensions (length / width / height) 1240/800/1350 mm weight 350 kg

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total length: 950 mm, total height: 930 mm, table width: 180 mm, input voltage: 400 V, total width: 560 mm, table length: 700 mm, stroke length: 52 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 50 rpm, Equipment: documentation/manual, Features Equipped as standard with forward and reverse rotation enabling thread cutting Tilting milling head on both sides for angled drilling, bevel milling, etc. Universal application, e.g. milling, drilling, tapping, etc. Large cross table with scale Infinitely variable speed control 2-speed gearbox for optimal power transmission High concentricity thanks to precision bearings Ergonomically designed control panel Digital display of feed and spindle speed Drill chuck B-16 Arbor Table length 700 mm Digital spindle feed display Digital spindle speed display EMC filter according to CE standard Safety guard Service tools Base / stand Technical data Drilling capacity in steel: 25 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 25 mm Distance between spindle and column: 170 mm Minimum distance between spindle and table: 45 mm Maximum distance between spindle and table: 325 mm Spindle travel: 52 mm Spindle speed range, variable: 50 – 3000 rpm Spindle taper: MT3 Table size: 700 x 180 mm Maximum X-axis travel: 490 mm Maximum Y-axis travel: 160 mm Tilting milling head: -90° / +90° Milling head height adjustment: 275 mm T-slot size: 12 mm Motor power: 1 kW Dimensions (L x W x H): 950 x 560 x 930 mm Weight: 160 kg Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. Hnodoytpl Uopfx Abhjp If you are interested in other machines, please visit our website.

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Hsdpfoqa Txqex Abhonp Weight 1600 kg good condition

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Hnodpsu T Ty Hofx Abhop Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: used, Radial drilling machine with table WEBO type HRH 100 / 3000 Machine No. 10009555/7 -- 1110185 -- 6046 -- Year of manufacture 1979 Hnedpfx Absfbt Hushep Drilling capacity: Ø 100 mm in ST 60 at a feed rate of 0.5 mm/rev. Nominal overhang: 3000 mm Maximum overhang: max. 3100 mm Spindle mount: MK 6 Spindle speed: 22.4 - 1600 rpm, 36 steps Feed rate: 0.05 - 2.5 mm/rev, 18 steps Distance spindle - baseplate: 970 - 2335 mm Quill stroke: 325 mm Swivel range of the arm: 360° Traverseable on bed, bed length: 7500 mm Clamping area of the table: 8000 x 2100 mm - Electric central clamping device - Drilling unit on the machine bed, traversable lengthwise by electric motor - Table consisting of 2 clamping plates with 7 x T-slot, (length 4000 x width 2100 x plate thickness 360 mm) Space requirement L x W x H: 8000 x 4550 x 4300 mm Maximum height: 4300 mm Transport height (bed with drilling machine): approx. 3150 mm Transport weight (bed with drilling machine): approx. 20 tons Transport dimensions table: L x W x H 4000 x 2100 x 900 mm (2 plates stacked on top of each other) Transport weight table: approx. 14 tons Good condition

Condition: new, WMD45A ROGI Drilling and Milling Machine VERY COMPLETE MACHINE Drilling capacity ----- 45 mm Face milling capacity ----- 80 mm Finger milling capacity ----- 32 mm Dimensions of the work table ----- 800 x 240 mm Dimensions of the T-slots ----- 14 mm Spindle mounting ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle stroke ----- 120 mm Head tiltable ----- Left / Right 90 degrees Longitudinal travel ----- 560 mm Cross travel ----- 230 mm Speed range 75 - 3200 RPM Weight ----- 580 KG Motor ----- 1.1 KW Voltage ----- 400V-3PH INCLUDED * 3-axis digital readout, brand SINO * Automatic longitudinal feed for the work table * Drill chuck with taper ISO30 - B16 * Left / Right switch Hjdpfx Aoga Tyzobhjnp * Spindle guard * Fine adjustment * 2-speed motor * Ejector pin * LED work light * Cooling system * Tapping function * Digital depth stop * Milling head with motorized height adjustment * Various tools in a case

Condition: new, Year of construction: 2018, I sell the throughfeed CNC drilling machine MAGGI Boring Evolution 1000 Router, Year 2018. New machine from showroom ! Configuration: Milling head motor 3,3kW / 24.000 rpm 11 + 4 + 2 pcs. drilling units Grooving saw 1 pc. Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. Max. Working width 1200mm Max. Element thickness 40mm Total area covered: 2200 x 1400mm / Only 3m2 Hnedey U Er Uspfx Abhop Total weight: 1350 kg. With full documentation and CE. Tools included and programmed. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2018, I sell the throughfeed CNC drilling machine HIRZT Imaco MAGGI Unica F12, Year 2018. New machine from showroom ! Configuration: Milling head motor 2,2kW / 18.000 rpm 14 + 6 + 2 pcs. drilling units Grooving saw 1 pc. Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. Max. Working width 1200mm Max. Element thickness 40mm Total area covered: 2600 x 1300mm Total weight: 1650 kg. Hedpfjy U Elusx Abhonp With full documentation and CE. Tools included and programmed. Very good condition. Available immediately.

Condition: used, Application: Woodworking Diameter: Various Hnodpfsvy Apiox Abhop Weight: 12 kg Length: Various Shank: Various As-new, unused, sharpened, and used shank cutters and drills for CNC machines as exemplarily shown.

Condition: good (used), Year of construction: 2002, Drilling and Milling Machine Manufacturer: KNUTH Type: TBF 500 Year: 2002 with coordinate table Spindle taper: MK4 Spindle speeds: 125-2500 rpm Motor power: 1.1 kW Hjdjy Spubjpfx Abhsnp Table travel: X 500 mm, Y 160 mm Max. installation height: 300 mm Spindle stroke: 130 mm Table size: 200 mm x 730 mm Machine dimensions: Width 1000 mm, Depth 800 mm, Height 1800 mm, Weight approx. 350 kg In good condition.

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 580 mm, feed length Y-axis: 200 mm, feed length Z-axis: 130 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 130 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 100 rpm, spindle mount: MK 4, throat depth: 286 mm, quill diameter: 130 mm, quill travel distance: 130 mm, type of input current: three-phase, total length: 860 mm, total height: 1,200 mm, table width: 240 mm, input voltage: 400 V, total width: 740 mm, table length: 800 mm, drilling capacity: 45 mm, position of the milling head: ±90°, drilling depth: 130 mm, workpiece weight (max.): 375 kg, distance table to spindle center: 450 mm, Equipment: documentation/manual, rotational speed infinitely variable, Drilling and Milling Machine ZX7045B VARIO (with automatic spindle feed) – professional metalworking machine The ZX7045B VARIO drilling and milling machine is a solid and versatile machine designed for professional metalworking in workshops, production plants and tool rooms. The machine allows drilling, milling and tapping operations, making it a universal solution for many machining applications. The machine is equipped with a powerful 2.2 kW motor and infinitely variable spindle speed control in the range of 100–3200 rpm. The spindle is mounted on precision bearings ensuring high machining accuracy, while the gear transmission operating in an oil bath guarantees durability and quiet operation. The head can be adjusted in height and tilted ±45°, allowing machining at various angles. The automatic spindle feed and automatic spindle reverse during tapping significantly improve operator convenience. A large worktable measuring 800 × 240 mm with T-slots allows stable clamping of workpieces. The heavy-duty construction and base ensure high stability during operation. The machine is also equipped with a cooling system and an emergency stop switch. Technical specification Parameter Value Model ZX7045B VARIO Max drilling capacity 45 mm Max face milling diameter 80 mm Max vertical milling diameter 32 mm Max tapping capacity M12 Spindle taper MT4 Spindle travel 130 mm Spindle speed 100 – 3200 rpm Speed control variable Max distance spindle–table 450 mm Distance spindle axis–column 286 mm Hnedpfxjyvh Hqj Abhsp Table travel X 580 mm Table travel Y 200 mm Table size 800 × 240 mm Head tilting ±45° Motor power 2.2 kW Power supply 400 V Machine dimensions 860 × 740 × 1200 mm Weight 375 kg Delivery to the customer is possible. Shipping cost is calculated individually by the transport company. If you are interested in other machines, please visit our website.

Condition: good (used), - MK3 - Variomat (continuously variable speed control) - Table dimensions: 670 × 290 mm - Digital display on the X-axis Hnsdsza Suropfx Abhjp - Cooling system - Lighting - 380V

Condition: good (used), Year of construction: 2008, CNC MILLING MACHINE Manufacturer: FEHLMANN (SWITZERLAND), Type: PICOMAX 55 CNC 2/3, Year of manufacture: 2008, with quill, Control system: HEIDENHAIN 520, x/y/z travel: 500/255/160 mm, rotary axis (w-axis) travel: 500 mm, Hnjdpfezabv Ejx Abhsp Table size: 885 x 320 mm, Spindle speed: 7100 rpm, Hydraulic tool change system: SF 32, Low operating hours.

Condition: new, Year of construction: 2025, functionality: fully functional, table size: 800 x 240mm table longitudinal movement range: 400 mm table transverse movement range: 230 mm max. drilling diameter in normal steel D30 mm max. drilling diameter at horizontal head D25 mm distance between table plane and spindle face 60 – 360 mm speed range: 80 – 2200 rpm max. vertical spindle speed 100 – 2000 rpm max. horizontal spindle speed 60 – 1350 rpm spindle taper ISO40 spindle stroke 120 mm power 2.2 / 1.5 kW drilling capacity dia. 50 mm thread drilling capacity max. M16 dimensions 1300 x 1100 x 2200 mm (w x d x h) weight approx. 900 kg Accessories - 3-way SINO DRO system - 90 degree rotatable head bracket Hsdpfx Asyr Ib Eobhjnp - 2 reducers (ISO40/MK3, ISO40/MK2) - drill head with shank, diameter 3 – 16 mm - 2 horizontal milling spindles - 1 15-piece chuck set diameter 2 – 26 mm - work lamp - cooling water system

Year of construction: 2011, operating hours: 8,000 h, condition: good (used), machine/vehicle number: 041-045, AUERBACH drilling and milling machine, model AX3 TLF, 2011, in good condition. Photos, dimensions, nameplate attached in the photos. Technical parameters: Longitudinal travel (X axis) table: 1600 mm Cross travel (Z axis) column: 700 mm Cross travel (W axis) drilling head: 1300 mm Vertical travel (Y axis) of the drilling head: 800-1200 mm Rotation axes: - B axis rotary table: 360 degrees - A axis drilling head: -25 to +15 degrees Drilling range - deep drilling: Diameter range: 3 - 32 mm Drilling depths in one pass: 1300 mm Maximum possible drilling depth: 1700 mm Main drive / deep drilling module: Hedpfx Abog N Tb Nehenp Nominal drive power: 12 / 18.5 kW Speed range: 60 - 8000 RPM Spindle torque: 115 Nm Feed drive: Feed speed: 1 - 15 (in the Y 1-10 axis) m / min rapid feed speed in all axes: 15 (Y axis 10) m / min Machine dimensions / installation site: Weight - main machine kg 12000 Installation site size: - Width: 5500 mm - Depth: 5300 mm - Height: 3400 mm Location: Kopalniana 72 Tarnowskie Góry, Poland

Condition: excellent (used), Rapid radial drilling machine / Radial drilling machine / Drilling machine (used) Manufacturer: Mikrosa Year of manufacture: 2001 Type: SRB 35 Drilling capacity: - Steel: 35 mm - Cast iron: 40 mm Thread cutting: - Steel: M20 - Cast iron: M24 Spindle taper: MK 4 Spindle speed: 20 – 2800 rpm, infinitely variable Automatic feed: infinitely variable Spindle stroke: 140 mm Arm reach: 1000 mm Table size: 1050 x 400 mm Column diameter: 200 mm Installation height: 600 mm Connected load: 7.8 kW Space requirement: approx. width 1250 mm, depth 2100 mm, max. height 2700 mm Weight: approx. 2000 kg Hnjdpfx Aey Skrzobhsp Hydraulic clamping Thread cutting device Depth stop Lateral clamping surface Drill chuck 2 gearbox stages The machine is in very well-maintained condition, runs very smoothly, and is ready for immediate operation. Forklift available, free loading on truck. Affordable shipping possible. Location of the machine: 48477 Hörstel

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Carrier machining Hedsv Iamzepfx Abhonp