Used Complete Sawmill (Mobile) for sale (18,105)

Condition: used, Year of construction: 1999, 1. EWD Log Processing Line BHZ (Timber Processing Center) Log handling Cable winch Cross conveyor Cable winch EWD H84 Infeed with FZ1 debarking unit EWD FZ3 Debarking unit, 2 x 75 kW EWD EVW Roller bed EWD FR22 T4 Saw with a cutting height of 330 mm, 4 x 80 kW EWD SK Splitting wedge Complete automatic log handling system Complete electrical system and controls Complete hydraulic system 2. EWD Edger Line FR9 T2 Cross conveyor Singulator Alignment roller conveyor Cross conveyor Slabber saw Edger infeed with plate measurement Edger FR9 with ripsaw Splitting wedge Transfer cross conveyor Njdpfx Aiezt Hzleyoda Side product sorting

Condition: good (used), Year of construction: 1995, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 380 V, input current: 32 A, cutting height (max.): 900 mm, cutting width (max.): 900 mm, Equipment: documentation/manual, lighting, motor brake, This sawmill includes: 2x clamping devices 4x vertical stops 4x leveling devices with clamps 4x log lifting arms 1x pre-cutter 1x log roller with drive 1x saw blade lubrication system 1x water lubrication system 1x electric positioning control Basic cutting length: 9.0 m Log passage: approx. 90 cm Hydraulic pump: 14 liters Motor power: 11 kW Saw blade width: 100 mm The saw was used as a secondary source of income, with approximately 500 cubic meters of timber cut per year. The friction wheel drive has been replaced with a hydraulic feed system, and the hydraulic pump has also been replaced. It has a tilting cabin and a handle heater for the fingers, which is supplied with warm hydraulic oil. The cast iron rollers were replaced about two years ago, and approximately 800 cubic meters of timber have been cut with them. Two saw bed extensions are included, one 3.0 m and one 2.0 m, for a total cutting length of 14.0 m. The saw motor was re-conditioned last year. Ndjdpfx Ajzk Exdjiyoa An additional 18.5 kW electric motor is included, but has not yet been installed. Approximately 15 saw blades for hardwood and softwood are included, some of which are new. The machine runs very well, all components are fully functional, and there are no leaks in the hydraulic system. The saw can be inspected while in operation. For sale due to the purchase of a new machine.

Condition: used, Year of construction: 2016, functionality: fully functional, cutting length (max.): 6,000 mm, wheel diameter: 1,000 mm, Horizontal Band Saw WRAVOR WRC 1000 Proffesional industrial saw with 30 kW motor — for cutting logs up to diameter Ø 950 mm Year of manufacture: 2016 Technical Specifications: • Main motor: 30 kW • Fixed command board on sawhead Ndsdpfx Aezd A Ivsiyoa • Control: fixed control panel with Unitronics V-130 PLC • Manual adjustment of cutting thickness possible • Track length: 9,5 m • Hydraulic log clamps: 4 X • Hydraulic lifting / mechanical rollers: 2 X • Hydraulic angles (90°): 3 X • Standard log turner: 2 X • Outfeed silon conveyor belt for board transport

Condition: new, Year of construction: 2026, HEAVY-DUTY horizontal band saw WRC 1150 AC, featuring the best technology on the market and a robust construction. - Powerful and reliable performance - Complete hydraulic equipment - SPS system supporting Industry 4.0 - Fast log turning and manipulation system on the saw bed - Fast up-down and forward-backward movements of the saw head - Precise and clean cutting results - Heavy-duty industrial construction - Easy operation (one operator manages the entire line) and efficient workflow, easy maintenance - Ideal for professional workshops and production use Nedpfjzd T Nwsx Aiyeda - Durable, accurate, and built for long-lasting performance

Condition: new, Year of construction: 2026, THE LARGEST BANDSAW IN ITS CLASS – the high-performance industrial bandsaw Wravor WRC 1250 AC – robust, precise, and suitable for cutting large logs. Equipped with automatic control and advanced features for maximum efficiency! ✔ strong and stable construction ✔ high precision ✔ large cutting capacity ✔ automatic control ✔ reliable and robust design Njdjzd Ua Rspfx Aiyeda ✔ main wheels made of cast steel, double-bearing (EXTREMELY STABLE CONSTRUCTION!), wheel diameter: 1250 mm, width 135 mm ✔ saw blade length: 160/180 (DOUBLE-SIDED) L = 9045 mm ✔ motor power: 55kW – 110kW, frequency converter optional Saw width: approx. 4500 mm (depending on equipment) Track width: approx. 2300 mm (depending on equipment) Saw weight: approx. 23,500 kg (depending on equipment and chassis length) Maximum cutting width (between guides): 1300 mm

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, cutting length (max.): 8,000 mm, overall weight: 14,000 kg, total length: 13,000 mm, year of last overhaul: 2026, saw band length: 9,045 mm, EXCELLENTLY MAINTAINED, FULLY REFURBISHED horizontal band saw WRAVOR WRC 1250 AC High-performance industrial saw with a 55 kW motor — for cutting logs with a diameter of 1250 mm Year of manufacture: 2018 Technical data: • Main motor: 55 kW • Control: fixed control panel with PLC Unitronics V-280 • Option for manual adjustment of cutting thickness Njdpfx Aiozd Uifsyjda • Track (length): 12.5 m • Log clamps: 5 x hydraulic • Hydraulic cylinders: 5 x • Angle supports (90°): 5 x • Standard log turner: 4 x • Mechanical support: 3 x • Pre-cutter: 1 x • Output conveyor belt for transporting sawn timber The images are for illustrative purposes only.

Condition: excellent (used), Year of construction: 2010, The following components of a Linck VM50 saw line are available: Condition of the machines is very good! Ndjdozfwlfspfx Aiyja Infeed device ZV21, model EV 50 (in stock) Profiling chipper ZD31, model VM50, 2 × 200 kW (in stock) Outfeed device AV31, model VZM (in stock) Centering device VZ21, model VZV (in stock) Log rotator DV21, model DV70-2 (in stock) Additional components: Infeed and centering device EVP – available from September 2026 Profiling chipper VM50, 2 × 200 kW – available from September 2026 Profiling aggregate VMP450 F61, 4 × 110 kW – available from September 2026

Condition: refurbished (used), functionality: fully functional, /// MONOBLOC COLUMN MODEL 1300/ SHF - Cast iron structure with stabilization treatment. - Cast iron flywheels, ellipsoidal shape, flywheel diameter 1300 mm. - Flywheel width of 165 mm for maximum blade width of 180 mm. - Flywheels with solid discs with special ribs to enhance mechanical characteristics, subjected to stabilization treatment; modeled with a double curvature for the best stability on the table; perpendicular to the axis of rotation. - Tilting the upper flywheel to adjust the blade thrust. - Hydraulic blade tensioning with tension indicators. - Main motor 55 kW (75 HP), automatic star-delta start, pulleys, belts and brake - For 180 mm wide canvas ///Carts hydraulic PRIMULTINI with 4 MORSE - 4 hydraulic morses - Max. clamp blade distance 1000 mm - Maximum needle opening 900 mm - Simultaneous hydraulic clamps - Fast and precise movement of clamps - Electronic module 2026 for control MOVEMENT clips - return arms Ndodpfx Aozmfrcsiyja - Hydrostatic advance - Automatic centralized lubrication with pump - Double control unit with seat - Cables ELECTRICAL and electrical panel - Flat and profiled rails for a maximum cutting length of 6 m MANUFACTURER PRIMULTINI ITALY - REFURBISHED LIKE NEW 2026 OPTIONAL: -Log ramp, length 4 m..... 20,000 eur excluding VAT -Log loading arms on the log saw trolley hydraulically operated with a single cylinder..... 20,000 eur without VAT - Conveyors with ROLLER for unloading - length Approx. 7m , width 1m ..... 20,000 eur excluding VAT SECOND UNLOADING ROLLER -length 6.3 m approx. ..... 20,000 eur without VAT

Condition: new, Year of construction: 2026, Engine Electric 30 kW Electric 37 kW Electric 45 kW Cutting dimensions Max. log diameter 105 cm Max. log length 4.5 m (Bed S) 8.4 m (Bed L) Up to 12 m (non-standard) Clearance between rollers 90 cm Max. cutting width (cant) 85 cm Headstock equipment Automatic cutting thickness adjustment device (Setworks) Industrial PLC controller with automatic mode Headstock up/down feed Electric (Servo) Headstock forward/backward feed Electric Saw blade guide arm Electric (joystick controlled) Saw blade cleaning system Automatic oil mist lubrication with pneumatic assistance Saw blade tensioning system Electric hydraulic with pressure accumulator Debarker Optional Chip outlet diameter 150 mm (6") Headstock features Four cameras Board discharge system Additional options Laser Saw blade Length 6270 mm Width 50 mm Ndjdpfozqz T Rjx Aiyea 75 mm (Standard) 100 mm 120 mm Saw blade guide wheels Diameter 800 mm Type Beltless Material Convex cast iron Bed equipment Bed structure Dual-sided headstock guide system Bed features Board conveyor belt Shock-absorbing roller Additional options Saw-following conveyor Log maneuvering kit Industrial hydraulics 1 or more log clamps on two rods 1 or more bidirectional chain turners 2 or more driven leveling rollers 2 or more stops 7.5 kW or 11 kW hydraulic unit

Condition: new, Year of construction: 2026, Electric Motor 22 kW Cutting Dimensions Max. log diameter 105 cm Max. log length 6.1 m 7.9 m (with BX6 bed extension) 9.7 m (with BX12 bed extension) Min. log length 1.8 m Clearance between rollers 84 cm Max. cutting width (cant) 78 cm Max. cutting height above the blade 34 cm Max. width of clamped material 66 cm Min. width of clamped material 5 cm Max. log weight 2.5 t Head Equipment Automatic thickness setting device (Setworks) Industrial PLC controller Head feed up/down Electric (Servo) Head feed forward/backward Electric Blade guide arm Electric (joystick controlled) Blade cleaning system LubeMizer Blade tensioning system Hydraulic with air cushion Debarker Optional Chip outlet diameter 150 mm (6") Head Features Board discharge system Laser Blade Length 5000 mm Width 38 mm 50 mm (Optional) Blade guide wheels Diameter 600 mm Type With flange-pressed and brush belt Material Cast iron Bed Equipment Bed construction Single-sided head guide system Cribbing beds Standard Ndsdpjzqz Sgsfx Aiyea Bed extension BX6 bed extension: 1.8 m BX12 bed extension: 3.6 m Bed Features Board conveyor belt Shock-absorbing roller Log maneuvering kit Industrial hydraulics Center clamp with two bars 2 double-sided clamping devices (optional) 2 two-way chain log turners 2 driven leveling rollers 3 stoppers on two bars 7.5 kW hydraulic unit

Condition: new, The edger is used for double-sided edge trimming of boards and logs. The use of automatic width adjustment, smooth feed, and laser markings on the cutting guide enable optimal use of edged boards. Technical specifications: Njdpfjwb Uwgex Aiyoda Minimum cutting width: 60 mm, maximum cutting width: 500 mm (horizontal clearance: 700 mm) Edge thickness: max. 65 mm Infeed table: 2000 mm Pick-up table: 2200 mm Distance between electric saws can be adjusted via the control panel Feed speed: uniform Saw diameter: 350 mm Number of saws on the spindle: 2 Main motors: 2 x 5.2 kW Machine weight: 1000 kg – Laser for marking the cutting line (2) – Electronic width measuring controller ANP 05

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automatic edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Cross-transfer of boards with a 4-strand chain cross conveyor - Singulation inclined conveyor 6000 mm wide, 3000 mm at an angle - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turners and sorters before the trimmer - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - cut length 505 mm for the underlying vibration trough - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - Automatic lowering of finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control system with Siemens S 7 - ensures perfect operation. Performance records/daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers Nodpfxey Uzhfo Aiyjda For example, one employee, processing side boards of 4000/17 x 76 mm, produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. We can provide a process video via WhatsApp!

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16041309, Equipment: 3rd hydraulic function, We offer this very good WRAVOR WRC 1150 AC complete sawmill (stationary), year of construction 2016. Njdpfx Ajy Hx I Toiyjda Manufacturer: WRAVOR Model: WRC 1150 AC Year of construction: 2016 Condition: very good Category ID: 1389 Type ID: 415 Type: complete sawmill (stationary) If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), machine/vehicle number: 406341 S222 N7804, BRENTA ETYELEC Industrial Band Saw Robust industrial quality – built to last for generations For sale is a BRENTA ETYELEC industrial band saw, manufactured by Ateliers de Construction Louis Brenta SPRL (Belgium). This machine comes from a professional Dutch sawmill and was used reliably there for decades. It has been regularly maintained and is in good technical condition. Technical data Manufacturer: BRENTA Type: ETYELEC Motor power: 60 HP (approx. 44 kW) Speed: 340 rpm Band wheel diameter: 1,400 mm Heavy-duty industrial design Suitable for professional continuous operation Condition Band wheels overhauled New bearings on the band wheels Smooth and low-vibration operation Guides and idler pulleys in good condition Ready for immediate use Special features Nodpfx Aozqmhgoiyeda We are deliberately waiting with the disassembly of the machine so that interested parties can still inspect and test the machine while it is running. This gives you the opportunity to personally verify the function, smooth operation, and technical condition of the machine. Advantages Extremely robust construction High cutting accuracy Easy-to-maintain design Proven BRENTA quality Suitable for soft and hardwood Ideal for professional sawmills and woodworking companies This machine was built in a time when industrial machines were designed for a lifespan of decades. Thanks to its robust construction and high-quality workmanship, it is still a reliable investment today. We will gladly provide you with the technical data, dimensions, and drawings upon request. Inspection and demonstration in running condition are possible by appointment. We are available for further information, additional photos, or videos.

Condition: used, Year of construction: 2006, For sale: LBL Brenta log clamping carriage – year of manufacture 2005 Ndjdpfex Ndpbjx Aiyea LBL Brenta log clamping carriage This LBL Brenta log clamping carriage has been completely overhauled and is ready for immediate use. The machine comes from a professional sawmill and was regularly maintained until it was dismantled. Equipment 4 independently adjustable clamping supports Integrated log turner Integrated flippers Distance between clamping supports: 2,300 mm – 1,800 mm – 1,400 mm New drive unit Including rails and control panel Ready for immediate transport and loading This machine is ideal for the precise cutting of roundwood and impresses with its robust construction and the proven LBL-Brenta technology. Please refer to the attached PDF documents for the technical data, dimensions, and drawings. Inspection is possible at any time by appointment. We are available for further information, photos, or videos.

Condition: refurbished (used), Year of construction: 2002, Sawmill ARTIGLIO Year - 2002 - ( Refurbished in 2023 ) Technical Details : - Flywheel - 1300 mm - Flywheel band - 168 mm - Max. blade length - 8860 mm - Three - Phase 400V 50hz Motors - Primary motor power - 55,8 kW - Blade tension motor - 0,55 kW - Pushing blade guidemotor - 1,5 kW - Flywheel inclination motor - 0,12 kW - Hydraulick brake unit motor - 1,5 kW - Central Crowing Equioment Consists : Nedov Ny Nxepfx Aiyeda - 3 Log clamping pressure - Fixed hooks - Mobile knockers with 3 fixed positions - Hydraulicl log turner - El . divider with 50 works programs - Transversal vice movement with two speed motor 1,8 - 8 mt./min. - Hydrostaic advancement with steel cable towing - Comand pult - Automatic centralized rubrication - Pantograph for cable

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Logs Wagon - Trolley - BONGIOANNI Technical Details : Year - 1997 Wagon length - 7 m Nedpfjrx Rq Eox Aiyjda Number of staples - 4 Eqipment Consisits : 1- Wagon - trolley 2. El. Cabinet 3. Comand pult 4. Hydraulic drive

Condition: new, Year of construction: 2026, WRAVOR Horizontal bandsaws WRC 1050,1150,1225,1250,1550,2000 edgers, multirip saws, mechanization etc. We are your contact for the company Wravor in Germany. We are happy to offer you the right machines. Ndedetpwgxopfx Aiyja

Condition: used, Year of construction: 1993, functionality: fully functional, Complete Sawmill / Sawing Line E.GILLET–KARA-STENNER Description: For sale: complete E.GILLET–KARA-STENNER sawing line for professional timber processing. Nsdpfszhbr Iex Aiyjda The line includes log handling, sawing, board discharge, cross transport and length cutting equipment. Suitable for a sawmill or wood processing company looking for a complete production line rather than separate individual machines. Included equipment: 1. E.GILLET wide band saw 2. KARA YS-VI, LS-240 circular saw 3. STENNER 105 wide band saw 4. Log conveyor — 26 m 5. Log conveyor — 7 m 6. Log splitter / log divider 7. Roller table — 16 m 8. Board unloading table 9. Cross conveyor — 8 m 10. RKG 1-400 cut-off / length cutting saw 11. Roller table — 6 m If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: reconditioned (used), Year of construction: 1996, Sawing unit, manufacturer Linck, type KCS 6 Ndodpfjzdiulsx Aiysa Base frame with 4 saw spindle units Twin-spindle system with 6 adjustable saw heads Cutting height 370 mm, weight 12,400 kg The machine is currently being overhauled in our workshop.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Canter Linea COSTA, model Prisma 30, with roller infeed for 6 m and roller outfeed left and right Ndodpfx Ajwt Uqqoiyea

Condition: excellent (used), Year of construction: 2024, We offer for sale a heavy-duty double-blade angular saw type D9, designed for efficient processing of hardwood logs up to 4 m length. The machine is in very good condition and is supplied as a complete line including clamping wagons, conveyors, sorting system, and operator control cabin. Key Features & Benefits Double-blade angular cutting system (horizontal + vertical saw) Designed for hardwood processing High-performance industrial solution Smoothly adjustable feed speed Complete technology line including conveyors and sorting Includes operator control cabin Energy-saving system with braking energy recovery Technical Specifications Cutting System Saw blades: 2 × 500 mm (horizontal + vertical) Saw head power: 2 × 22 kW Blade speed: approx. 2,900 rpm Max. cutting section (angular): approx. 180 × 180 mm Material Capacity Log diameter: approx. 100 – 800 mm Log length: approx. 2,000 – 4,000 mm Processing line for logs up to 4 m Feeding & Handling 4 clamping wagons, each with clamp and rotator 1 transport wagon with travel motor (approx. 30–32 kW) Adjustable feed speed up to approx. 120 m/min Horizontal compensation of tapering Hydraulic system with lubricated track and wagons Drive & Power Main motors: 2 × 22 kW Saw head feed servo (X axis): approx. 5.5 kW Clamping tower servos (Y axis): 5 × 5.5 kW Travel motor: approx. 30–32 kW Hydraulic unit motors: 5 × 3 kW Total installed power: approx. 135 kW Control & Equipment Operator control panel 2 laser guides Remote access system Measurement of power consumption Hydraulic heating function Electric cabinet heating Conveyors & Line Equipment Infeed system: 2 × infeed conveyors, each 6 m long Heavy-duty 3-chain construction Integrated log handling and transfer system Nodpfx Aiszgtfqoysda Chip extraction belt conveyor (cutting waste removal) Outfeed system: 1 × single-sided tilting conveyor for waste 2 × sorting conveyors for processed timber (both sides discharge) Sorting System Extraction Requirements Required extraction capacity: min. 8,000 m³/h Connections: 150 mm + 2 × 200 mm Dimensions & Weight Machine length: approx. 36,500 mm Machine width: approx. 3,000 mm Machine height: approx. 3,000 mm Total weight: approx. 13,500 kg Condition & Sale Terms Condition: Very good Fully operational industrial line Sale includes control cabin Dismantling and removal to be arranged by the buyer Advantages Complete production line High productivity for hardwood processing Strong and reliable industrial construction Precise cutting and stable output Efficient handling with integrated conveyors and sorting

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Complete sawmill for pallet lumber production, consisting of: Individual sale of machine packages is also possible. 1. Log yard Häwa, with root reducer and Valon Kone debarker VK 90. Calibrated factory inlet measurement system, manufacturer Jörg. Sorting with 28 bins. Ndedpfxjx T Azws Aiysa Log length 2.0 - 5.0 m. Log diameter 20 - 90 cm. 2. Sawmill: Möhringer band saw, running band saw with Flexi Drive carriage. Splinter detection device. Log feeding with stepped singulation. Laser measurement system Bidac. Kallfass model trimming. Resawing: EWD Optimes with chipper PF 19 and double-blade saw NKU. Brodbaek edger. Stacking system for main product, empty pallet handling for main and side products. Kuka robot for packing side products and main products, four dimensions possible. Complete mechanization, electrical and electronic control cabinets, etc. Disposal. Detailed plans or a video can be sent upon request.

Condition: excellent (used), Wood-Mizer HR700 horizontal band saw, Main motors: 2 x 15 kW, Blade feed motor: 1.5 kW, Feed rollers: 3 x 0.12 kW, Max. cutting width: 400 mm, Max. cutting height: 370 mm, Guide wheel diameter: 600 mm, Pneumatic material clamping system, Adjustable feed rate via frequency inverter: 0-30 m/min, Ndodszg T Dyopfx Aiyja Hydraulic blade tensioning system, Manual height adjustment.

Condition: new, Year of construction: 2025, functionality: fully functional, Professional WoodMizer LT70 sawmill, complete configuration, still packaged. The machine was delivered in April 2025 and has never been used. It was assembled by the manufacturer and is ready for operation. Ndedeyr I Dmopfx Aiyja