Used Cormak Ps12E-2000 for sale (7,354)

Condition: new, Year of construction: 2026, The CORMAK MCB350HD cutter in this segment of machines is the largest cutter with very large cutting capacity of 350x260. It has a more powerful engine and a convenient control panel. Machine arm made of one-piece cast iron with additional ribs for greater rigidity. Reversible cutting angle from -45° to 60°. Machine characteristics The CORMAK MCB350HD metal band saw with CE enables cutting in a plane perpendicular to the axis of the cut material or at any angle in the range from -45 to +60 degrees. The cut piece can be fed manually or through any feeding device. The feed during cutting is gravitational based on the principle of oil flow in a two-chamber hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. When the cut is complete, the machine automatically stops and the operator raises the arm manually to the starting position. Feeding is done manually. This model is used for both unit and serial production, and due to its robust construction, it can cut a wide range of materials, including stainless steel, tool steel, solid materials and profiles. The device enables angular cutting of the material by turning the arm to the left and right. The cutter arm made of a uniform cast iron together with the 27 mm wide cutting band used in this cutter allows you to fully perform multi-series cuts of both profiles and solid materials. The arm is equipped with an automatic blade tension sensor, it is tilted by 25 degrees, which increases the life of the blade. A cleaning brush is attached to the bottom of the arm for perfect blade cleanliness and function. The drive of the machine is transmitted through a worm gear filled with gear oil. The machine has a three-phase motor with double windings and two cutting speeds. Motor thermal protection. This cutter has a very large range of work when cutting at an angle from 45º to the left to 60º to the right. The machine has two speeds of the cutting band: 32 and 72 m/min. A cutter with an automatic, smoothly adjustable, gravitational arm feed downwards. Construction: the frame, vice and rotating table are cast iron. Closed emulsion cooling system with fluid distribution to the blade guides. The machine is equipped with a bumper with a ruler for setting the length of the cut material. At the back of the machine there is a roller feeding the material to be cut. Safety during the cutting process is ensured by an electrical installation that meets all CE requirements. The machine has a limit switch that stops the machine after the cutting process is finished, an emergency switch, the so-called "safety mushroom", a series of microswitches that turn off the machine when, for example, we open the cover of the belt transmission or the cover of the cutting band. Technical data MINIMUM CUTTING DIAMETER - ø5mm MINIMUM LENGTH OF MATERIAL IN VISE - 100mm DISTANCE OF THE VISE BASE FROM THE GROUND - 940mm CUTTING BAND DIMENSIONS - 2950x27x0.9mm TOTAL POWER - 2.2kW TAPE SPEED - 36 / 72 m min-1 DRIVE/PULLEY DIAMETER - 330mm DIMENSIONS - 2000x1330x2020mm WEIGHT - 540kg ANGLE PIPE PROFILE SQUARE 0º-- ø270 350 × 240 260 x 260 45º R ø230 230 × 150 210 x 210 45º L ø200 200 × 170 170 x 170 60º R ø140 140 × 140 140 x 140 Kdodpfxji D Di Se Aayek The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Multifunctional, efficient milling machine, designed for working with stone, manufacturing tombstones but also for wood materials, MDF, plywood, plexiglas. Made of steel and cast iron. Features Rigid device with a precise resolution and full interpolation in each of the X, Y, Z axes Tool height sensor Central lubrication Double vented control panel Strengthened design Water table for material cooling Strengthened guiding rolls - improve inserting and removing workpieces Capabilities tombstone manufacturing (all kinds of stones, ceramics, glass, granite, marble, etc.) stone reliefs, engraving, milling, etc. wooden materials, MDF, plexiglas, plywood, etc. Technical data Working area 1300x2500 (1500x3000mm) Z-axis 400 mm (raised gantry) Spindle 5.5 kW flood coolant Inverter 7.5 kW Controller DSP - digital data processing + RichAuto-AutoNow-A11E control Linear guides Hiwin Software Artcam The price is a net price. Price does not include shipping costs. Kodpei Ab Akofx Aayedk For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: new, Year of construction: 2026, A universal mobile belt grinder designed for grinding/polishing elements that may be impossible to transport due to their size or weight. Machine description Kdodpfxsvu Unmo Aayok Excellent device stability. Adjustable depth stop Easy and convenient operation Designed for grinding/polishing elements that are difficult to transport due to their dimensions Highly effective in grinding or polishing welds near the floor Technical parameters Motor (kW) 2.8 Contact wheel (mm) 195x150 Steering roller (mm) 195x150 Flat grinding (mm) 150x450 Tape size (mm) 2000x150 Belt speed (mm) 15/30 m/s m/s Working height (mm) 475-1240 Weight (kg) 85 Packaging (cm) 750x1100x800

Condition: new, Year of construction: 2026, Industrial bench grinder equipped with two 250 mm diameter discs. The stable and rigid construction ensures quiet and vibration-free operation. Machine description Rotor design based on bearings from the world's best manufacturer NSK, ensure quiet and smooth operation and a long service life of the machine Powerful drive motor with high torque Adjustable guards made of durable plastic for effective protection against sparking Adjustable workpiece supports Kedpfsvlkvhjx Aaysdk Technical specifications SANDER BOARD SIZE 250 x 32 mm disc or grinding wheel bore 32 mm GRINDING WHEEL GRIT K 36 / K 60 RPM 2960 rpm MOTOR POWER S1 0,9 kW MOTOR POWER S6 1,5 kW POWER 400 V DIMENSIONS 530 x 310 x 1150 mm WEIGHT 32,5 kg

Condition: new, Year of construction: 2026, The Cormak M200S sander is a professional tool with high performance and precision. Equipped with a powerful drive motor, it provides fast and efficient grinding of various materials. The rotor design based on ball bearings ensures motor reliability and quiet operation. Plastic guards protect against sparks. This is a versatile tool that is easy to use thanks to the speed control and ergonomic handle. Ideal for professionals and hobbyists. Features of the M200S disc grinder The Cormak M200S grinder is a professional grinding tool that offers an excellent combination of high performance, precision and durability. Thanks to the rotor design based on ball bearings, this grinder guarantees motor reliability and quiet operation, which is important for both intensive use in the workshop and in domestic applications. The powerful drive motor of the Cormak M200S sander is equipped with high torque, which translates into efficient material removal and a fast surface finish. The number of revolutions provides the optimum sanding speed for a variety of materials. The motor power of 0.9 kW allows efficient material removal and rapid achievement of the desired results. Designed for use with 400 volts, ensuring stable power supply and efficient operation. Regardless of the type of material, be it wood, metal or plastic, this sander will meet all requirements. Equipped with a 200x32 mm fi sanding disc, it enables larger surfaces to be sanded efficiently. An important aspect that contributes to work safety is the Cormak M200S sander's plastic guards. As well as providing protection from sparks, the guards are lightweight yet robust, making them easy to manoeuvre and reducing operator fatigue. In addition, the intuitive control panel provides convenience and ease of use. If you are looking for a professional sanding tool that offers reliability, high performance and precision, the Cormak M200S sander is an excellent choice. Its robust construction, powerful motor, protective guards and ability to connect a dust extraction system make it an indispensable tool in the workshop, carpentry shop or during renovation work. Check the specifications and compare prices to find the best deal for your needs. Technical specifications of the M200S disc sander SIZING DIAGRAM 200 x 32 mm disc or grinding wheel opening 32 mm Ksdpfx Aasvlktteyodk DISC GRANULATION K 36 / K 60 RPM NUMBER 2850 rpm MOTOR POWER S1 0,9 kW MOTOR POWER S6 1,5 kW VOLTAGE 400 V DIMENSIONS 520x300x1130 mm WEIGHT 26 kg

Condition: new, Year of construction: 2026, Industrial bench grinder equipped with two 300 mm diameter discs. The stable and rigid construction ensures quiet and vibration-free operation. Ksdpfovlkwfsx Aaysdk Machine description Rotor design based on bearings from the world's best manufacturer NSK, ensure quiet and smooth operation and a long service life of the machine Powerful drive motor with high torque Adjustable guards made of durable plastic for effective spark protection Fitted with 35 mm diameter suction port, with possibility of connecting an extraction unit Adjustable workpiece supports Unlike the competition, the machine is equipped with industrial bearings from world-class manufacturer NSK. Technical specifications DIMENSION OF THE DISPLAY 300 x 50 mm disc, grinding wheel bore 75 mm GRINDING WHEEL GRIT K 36 / K 60 suction nozzle diameter 2 x 35 mm NUMBER OF RPM 1450 rpm MOTOR POWER S1 2,2 kW MOTOR POWER S6 3,0 kW VOLTAGE 400 V DIMENSIONS 700 x 430 x 1170 mm WEIGHT OK. 78.5 kg

Condition: new, Year of construction: 2026, CORMAK MSM250 Belt and Disc Sander with Stand – A Professional Machine for Multiple Applications The CORMAK MSM250 multifunctional belt and disc sander is a modern and efficient combination sanding machine designed for industrial, workshop, and woodworking use. By combining both belt and disc sanding functions, this unit offers maximum flexibility and efficiency when working with metal, wood, and plastics. Equipped with high-quality NSK bearings, this sander operates extremely quietly, smoothly, and reliably over long periods. This sets it apart from the competition and ensures professional-grade performance. The belt sander with stand features a balanced rotor supported by ball bearings and a powerful motor with copper windings, delivering high torque – essential for intensive sanding tasks. An integrated 38 mm dust extraction port allows easy connection to a dust collection system, improving both comfort and safety during operation. Additionally, the CORMAK MSM250 disc sander with stand is equipped with an adjustable work rest and an IP54 protection rating – ensuring precision and operator safety. If you're looking for a reliable bench sander with universal application, the MSM250 model will meet the expectations of even the most demanding users. Key Features: Combination belt and disc sander – maximum functionality Industrial-grade NSK bearings – quiet operation and high durability Suitable for sanding metal, wood, and plastics – versatile applications Copper-wound motor – reliability and performance 38 mm dust extraction port – clean and safe workspace Stable stand – user comfort and ergonomic design Technical Specifications: Specification Value Disc size 250 x 32 mm Disc bore diameter 32 mm Disc grit K 40 Belt size 1020 x 75 mm Kodpfxjxfgw Rs Aayedk Belt grit P 80 Rotational speed 2960 rpm Motor power (S1 continuous duty) 0.9 kW Motor power (S6 intermittent) 1.5 kW Voltage 400 V Dimensions 570 x 310 x 1410 mm Weight 32.5 kg S1 – Motor power for continuous operation under full load S6 – Motor power for intermittent operation with idle periods up to 40%

Condition: new, Year of construction: 2026, Folding machine with exchangeable segments. Its simple construction ensures comfortable handling. Machine characteristics The folding machine has exchangeable segments on the upper and lower part. It gives extremely broad use for big elements as well as details folding. The segments are made of pressure iron castings, resistant to deformations and of exceptionally high strength. A simple construction secures high operation comfort and a broad range of practical use. The smallest segment possible to clamp is of 25 mm size and the biggest is of 270 mm size with a possibility of place change enable folding of any shape in the quality to be achieved. The sheet metal maximum thickness is 2 mm and the possibility of opening adjustment up to 48 mm make that there is practically no limits for this model. Segment dimensions 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 75 mm 100 mm 150 mm 200 mm 250 mm 270 mm Technical data WORKING WIDTH 1270 mm MAXIMAL SHEET METAL THICKNESS 2,0 mm MAXIMAL OPENING LENGTH 48 mm BENDING ANGLE 0° - 135° NUMBER OF SEGMENTS 12 pieces Kjdpfx Aomtwtmeaysdk DIMENSIONS 1710 mm x 750 mm x 1420 mm WEIGHT 422 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description Ksdpfowq A Dyjx Aayedk CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, The very efficient Cormak 32 column drill is an ideal solution for professional workshops and small-scale production. Equipped with a 1500W two-speed motor with a rotation direction switch for right and left. It has a table height adjustment using a toothed rack. The work table tilts from 0-45 degrees to the left and right. Additionally, the Cormak 32 drill is equipped with a gravity cooling system. The set includes a 150 mm vice and a drill chuck. Technical data Maximum drilling diameter 32 mm Grip capacity 16 mm Spindle to column distance 254 mm Maximum spindle stroke 120 mm MK4 spindle mount Maximum distance of the table from the spindle 595 mm The distance between the pin and the column is 260 mm Maximum distance of the base from the spindle holder 1075 mm Table dimensions 475x425 mm Column diameter 92 mm Motor power 1.5 kW 400V power supply Gravity cooling system Kdodpfx Aajridpwjyek Overall dimensions 1670 x 760 x 475 mm Net weight 144 kg Spindle speed range Motor speed Spindle speed (min-1) 1400 min-1 120 200 250 360 400 450 950 1280 1520 1840 2440 3480 700 min-1 60 100 120 180 200 220 470 640 760 920 1120 1740 Standard equipment 1500W two-speed motor Left and right rotations DTR in Polish CE declaration Gravity cooling system Optional equipment feeder

Condition: new, Year of construction: 2026, The Cormak 25 column drill is a very efficient column drill, which is standardly equipped with a two-speed 1000 W motor with a rotation direction switch for right and left. The excellent design makes this device work very precisely. It has a table height adjustment using a toothed rack. The work table tilts from 0-45 degrees to the left and right. The set includes a 123 mm vice and a drill chuck. FREE MAGNETIC CHIP COLLECTOR ZW580! Technical data Maximum drilling diameter 25 mm Grip capacity 16 mm MK3 self-locking chuck The distance between the spindle and the column is 216 mm Maximum spindle stroke 80 mm Maximum distance of the table from the spindle 640 mm The distance between the pin and the column is 215 mm Maximum distance of the base from the spindle holder 1136 mm Table dimensions 355x355 mm Column diameter 92 mm Motor power 1000 W Overall dimensions 1635 x 642 x 356 mm Net weight 85 kg Spindle speed range Motor speed Spindle speed (min-1) 1400 min-1 160 240 290 350 410 480 530 590 660 720 1190 1350 1510 1970 2100 3000 700 min-1 80 120 140 170 200 240 260 290 330 360 590 670 750 980 1050 1500 Standard equipment 1000W two-speed motor Left and right rotations DTR in Polish CE declaration Optional equipment cooling system feeder Kedsridn Sopfx Aayjdk

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK DC2200 Model The CORMAK DC2200 is a powerful and robust cyclone dust extractor, designed to efficiently purify the air in woodworking shops, furniture factories, and metalworking facilities. Thanks to its cyclone separator, high-performance radial fan, and modern filtration system, the machine ensures effective particle separation and long-term high efficiency. Main Advantages of the CORMAK DC2200 High extraction capacity – up to 2800 m³/h – effective removal of dust and shavings from multiple workstations simultaneously Cyclone separator – separates larger particles before the filter, extending its service life Powerful 2.2 kW (2200 W / 50 Hz) motor – stable and reliable continuous operation Large 151-liter metal container – convenient and safe waste collection Filtration area of 4.8 m² – ensures high efficiency in capturing fine dust particles Compact, mobile design – sturdy frame with transport wheels for easy movement Quiet operation – optimized fan design reduces noise without sacrificing performance Design and Technology The CORMAK DC2200 is equipped with a 365 mm radial fan, generating a maximum static pressure of 2220 Pa. This allows efficient air suction through long ducting systems and multiple workstations. The extractor offers three suction inlets (3 × Ø100 mm) and one main inlet (Ø200 mm) for flexible setup according to the production area layout. The cyclone separation system effectively removes heavier particles at the inlet, directing only pre-cleaned air to the container. The cylindrical filter (Ø370 × 612 mm) ensures consistent airflow even during intensive operation. Performance and Ergonomics The DC2200 extractor is designed for daily use in small and medium-sized workshops. The 151-liter container (Ø620 × 570 mm) provides long working cycles without frequent emptying. With its compact dimensions (1320 × 900 × 1840 mm) and lightweight design (136 kg net), the unit fits easily into any workspace. Applications The CORMAK DC2200 is ideal for use in: Carpentry and furniture workshops Sawmills and wood-processing facilities Model-making and metalworking shops Kdodpfx Aexrdhajayek Production of composite and MDF components Standard Equipment Cyclone separator Cylindrical filter with large filtration surface 151 L metal container for dust and shavings Transport wheels Suction inlets: Ø200 mm and 3 × Ø100 mm Technical Specifications Parameter Specification Motor power 2.2 kW / 50 Hz Airflow (without filter) 3900 m³/h Max. static pressure 2220 Pa Fan diameter 365 mm Inlet diameter 1 × Ø200 mm / 3 × Ø100 mm Container volume 151 L Container dimensions Ø620 × 570 mm Filter surface area 4.8 m² Filter dimensions Ø370 × 612 mm Overall dimensions (L × W × H) 1320 × 900 × 1840 mm Weight (net / gross) 136 / 170 kg

Condition: new, functionality: fully functional, Year of construction: 2026, The extractor is characterized by high negative pressure and vibration-free operation. Thanks to its appropriate dimensions, the extractor can be placed under the table of the format saw. All our extractors are characterized by simple operation and quick bag change. The metal impeller of the absorber guarantees quiet, failure-free operation of the device. Very favorable price to the efficiency of the device. The extractor works perfectly with saws, format saws, planers, milling machines, etc. Device description For shavings, sawdust, dust from milling machines, planers and saws, etc. High suction power Easy movement thanks to the chassis Impeller and metal housing Quick mounting system for the filter and bag Thanks to its compact design, it takes up little space in the workshop, while maintaining high efficiency of 2200 m / h3!!! Technical parameters SUCTION CAPACITY 2200 m³/h BAG DIAMETERS 500 mm INLET DIAMETER 125 mm MOTOR POWER 2.2 kW / 400V DIMENSIONS 1160 x 605 x 750 mm Kdodjvuzt Nepfx Aayek WEIGHT 50 kg

Condition: new, Year of construction: 2026, Thanks to the many years of experience of our CORMAK team, DCV series extractors in the TC Viber version have been created. Designing a new technological line has allowed us to create high-class extractors Advantages has an additional pair of doors for easier bag replacement DCV 6500TC extractor is another milestone in the production of efficient sawdust and dust extractors whose aim is to constantly provide the same extraction parameters during the entire work cycle. the new TC extractor series has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Failure-free filter shaking system with the possibility of working in an automatic cycle The new patented security system on the market guarantees failure-free operation of the device, durable, massive construction guaranteeing quiet and vibration-free operation of the extractor takes up little space and yet can extract large amounts of dust and chips > strong and quiet fan guaranteeing high vacuum efficiency! failure-free operation confirmed by production plants dealing with large orders every day they have a special blade design, making them more efficient and effective, and also contributing to energy savings very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season large filter surface possibility of building a ceiling system and connecting several machines working simultaneously with DCV 6500 extractors quick replacement of waste containers designed in such a way as to maintain 99.99% airtightness of the system, metal waste containers with a mobile driving system facilitating trouble-free movement. Also equipped with a peephole to help check the level of filling of the containers low noise and high efficiency are ensured by a balanced metal rotor and an improved engine ensures perfection and cleanliness at the workplace, which directly translates into the quality of your products works perfectly with machines such as: grinders, edge banding machines, panel saws, etc. Control cabinet for switching the device on / off We guarantee high quality of cleaning !!! polyester filter stops dust up to 5 microns in diameter, to filter smaller particles, use a filter such as HEPA It is forbidden to use this extractor in an explosive atmosphere The extractor is used for work in the carpentry industry with sawdust, shavings, dust (it is not adapted to work with wet raw material, e.g. wet sawdust) Before starting the extractor, dismantle the lower beam to have free access to the containers for shavings POLISH PRODUCTION Technical parameters CONTINUOUS OPERATION MOTOR POWER S1 5.5 kW / 400 V, 50 Hz SPEED Kdsdouc U N Uepfx Aayek 2900 rpm SUCTION EFFICIENCY 6500 m3/h SUCTION PORT DIAMETER 280 mm SPEED SUCTION 28-32 m/s FILTER SURFACE 16 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 32 WASTE CONTAINER CAPACITY 500 L DIMENSIONS 2440 x 930 x 2270 mm WEIGHT 440 kg

Condition: new, For sale: high-quality compensation (flexible) hose by BOA, made of stainless steel, designed for industrial applications. 📋 Technical data: Manufacturer: BOA Kdjdpfx Aasyzi Hvsyek Type: SP20 (Ringwellschlauch) Nominal diameter: DN65 Length: 2000 mm Operating pressure: PN16 Connections: flanged Material: stainless steel (INOX) Construction: corrugated hose + steel braid Certifications: DIN / VdS ⚙️ Application: industrial installations water, gas, and steam systems compensation for vibrations and thermal expansion protection of pumps, valves, and pipelines 📦 Condition: New – old stock (NOS) Possible minor traces of storage (visible in the photos). Unused and in full working condition. ✅ Advantages: high resistance to temperature and pressure very good flexibility durable stainless steel construction vibration and noise reduction 📸 Included: Exactly what is shown in the photos.

Condition: new, Year of construction: 2026, functionality: fully functional, All our extractors feature easy operation and a possibility of quick bag replacement. Wheeled base ensures portability. Metal rotor ensures silent and failure-free extractor operation. Affordable price in comparison to machine's efficiency. Metal balanced rotor ensures vibration-free and quiet operation Quick mounting of the burlap extraction bag Stable metal construction Default equipment 6 burlap bags Technical data Suction efficiency 4860 m3/h Bags capacity 3×200 L Number of bags 6 Extracting connector diameter 1×180, 4×100 mm Kdjdpfx Aajvu Rx Ijysk Dimensions (L×W×H) 2355×590×2150 mm Weight 125 kg Motor power 3.8 kW Power supply 3-phase 400V User manual yes EC Declaration yes

Condition: new, Year of construction: 2026, Machine Characteristics Heavy, Stable Cast Iron Body: A solid structure based on a heavy cast-iron frame ensures stability and durability, even during intensive use. Milling Height Adjustment on the Support: A unique height adjustment system located on the support, rather than on the column, allows the machine to be adapted to various applications. Massive Cross Table for Milling/Drilling: The large, precisely ground table surface provides a solid base for a wide range of projects. Dovetail Guides: Innovative dovetail-shaped guides ensure smooth movement along all three axes, resulting in excellent machining precision. Quiet Operation Thanks to Ground Gears: Ground gears ensure quiet operation, improving working comfort in the workshop. Left and Right Spindle Rotation: Operate the tool in both directions to suit different tasks. Tiltable Head (+/- 90°) and Adjustable Head Height: Flexible angle adjustments and head-height control provide full machining versatility. Digital Longitudinal and Cross Readouts Additional Options, Additional Benefits The ZX 7045E DRO version is available immediately from stock, and you also receive a free accessory set: Drill chuck Reducing sleeve MK4/MK3 Reducing sleeve MK3/MK2 ZX 7045E DRO Milling-Drilling Machine The ZX 7045E DRO is a high-precision, advanced machine tool designed for reliable metalworking performance. Equipped with digital readout systems (DRO) and a robust construction, it enables accurate milling and drilling across a wide range of materials. Thanks to its versatility and reliability, the ZX 7045E DRO is an ideal solution for professional workshops, meeting the demands of even the most complex machining applications. (The base is available as an optional accessory.) Technical Specifications Maximum drilling diameter: 45 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 28 mm Maximum thread diameter: 12 mm Spindle quill travel: 100 mm Spindle taper: MT4 Spindle speeds (6 speeds): 95, 170, 280, 540, 960, 1600 rpm Maximum distance spindle nose–table: 460 mm X / Y / Z travel: 500 / 210 / 425 mm Distance spindle–column surface: 245 mm Worktable dimensions: 730 × 210 mm Base dimensions: 400 × 600 mm Motor (S1/S6): 1500 W / 2100 W, 400 V Machine dimensions (with base): 1080 × 770 × 1460 mm Weight: 278 kg Included Equipment 2-axis digital readout MK3/B18 drill chuck arbor Kedox Dkr Nspfx Aayodk Hand tools 3–16 mm drill chuck (B18) Reducing sleeve MK4/MK3 Reducing sleeve MK3/MK2 User manual

Condition: new, Year of construction: 2026, The ZX 7045E 230V milling/drilling machine is a versatile tool for machining steel . It is ideal for drilling, reaming, boring, threading , milling and face milling. The machine allows precise drilling of holes in cast iron up to 45/40 mm in diameter. In addition, bolts up to M12 mm can be threaded, up to 80 mm wide can be milled and rebates up to 22 mm deep can be made. The ZX 7045E milling/drilling machine is a reliable tool ready to go! Machine characteristics Heavy Stable Cast Iron: The robust construction based on heavy cast iron ensures stability and durability of the machine even during intensive use. Milling machine height adjustable on the slide: The unique height adjustment on the slide, rather than on the column, allows the machine to be adapted to different applications. Massive Cross Table for Milling/Drilling Machine: An impressively sized table with a precision-ground surface provides a solid base for a variety of projects. Swallow Tail Shaped Guides: Innovative dovetail-shaped slides guarantee smooth movements in three axes for excellent machining results. Quiet Operation Thanks to Ground Gear Wheels: The ground gears make the machine run quietly, which contributes to comfort in the workshop. Left and Right Rotation: Rotate the tool in both directions, adapting to different tasks. Pivoting head +/- 90 degrees and Adjustable head height: Flexibility in angle setting and height adjustment allow full control over material processing. Additional Options, Additional Benefits: The ZX 7045E version is available from stock and you will also receive a kit free of charge: Drill chuck Reduction bush MK4/MK3 Reduction bush MK3/MK2 The ZX 7045E milling/drilling machine is not just a tool, it is a partner that can meet even the most demanding challenges in your workshop. Order now and experience perfect precision and performance! (Base available as an option) Technical data Maximum drilling diameter 45 mm Maximum face milling diameter 80 mm Maximum cylindrical milling cutter diameter 28 mm Maximum thread diameter 12 mm Spindle pin protrusion 100 mm Spindle taper MT4 Spindle speed (6 speeds for 1400r/min motor) 1400r/min ) 95, 170, 280, 540, 960, 1600min-1 Maximum distance from spindle nose to table 460 mm Travel in X / Y / Z axis 500 / 210 / 425 mm Distance from spindle to column surface 245 mm Work table dimensions 730x210 mm Base dimensions 400x600 mm Motor s1/s6 1500W/2100 W 230V Machine dimensions (height with base) 1080 x 770 x 1460 mm Weight 278 kg Available accessories MK3/B18 drill chuck shank handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 Kdedpfx Aewnb T Ieayek reduction sleeve MK3/MK2

Condition: new, Year of construction: 2026, The ZX 7045E milling/drilling machine is a versatile tool for machining steel . It is ideal for drilling, reaming, boring, threading , milling and face milling. The machine allows precise drilling of holes in cast iron up to 45/40 mm in diameter. In addition, bolts up to M12 mm can be threaded, up to 80 mm wide can be milled and rebates up to 22 mm deep can be made. The ZX 7045E milling/drilling machine is a reliable tool ready to go! Machine characteristics Heavy Stable Cast Iron: The robust construction based on heavy cast iron ensures stability and durability of the machine even during intensive use. Milling machine height adjustable on the slide: The unique height adjustment on the slide, rather than on the column, allows the machine to be adapted to different applications. Massive Cross Table for Milling/Drilling Machine: An impressively sized table with a precision-ground surface provides a solid base for a variety of projects. Swallow Tail Shaped Guides: Innovative dovetail-shaped slides guarantee smooth movements in three axes for excellent machining results. Quiet Operation Thanks to Ground Gear Wheels: The ground gears make the machine run quietly, which contributes to comfort in the workshop. Left and Right Rotation: Rotate the tool in both directions, adapting to different tasks. Pivoting head +/- 90 degrees and Adjustable head height: Flexibility in angle setting and height adjustment allow full control over material processing. Additional Options, Additional Benefits: The ZX 7045E version is available from stock and you will also receive a kit free of charge: Drill chuck Reduction bush MK4/MK3 Reduction bush MK3/MK2 The ZX 7045E milling/drilling machine is not just a tool, it is a partner that can meet even the most demanding challenges in your workshop. Order now and experience perfect precision and performance! (Base available as an option) Technical data Maximum drilling diameter 45 mm Maximum face milling diameter 80 mm Maximum cylindrical milling cutter diameter 28 mm Maximum thread diameter Kdodpfxoud Izto Aaysk 12 mm Spindle pin protrusion 100 mm Spindle taper MT4 Spindle speed (6 speeds for 1400r/min motor) 1400r/min ) 95, 170, 280, 540, 960, 1600min-1 Maximum distance from spindle nose to table 460 mm Travel in X / Y / Z axis 500 / 210 / 425 mm Distance from spindle to column surface 245 mm Work table dimensions 730x210 mm Base dimensions 400x600 mm Motor s1/s6 1500W/2100 W 400V Machine dimensions (height with base) 1080 x 770 x 1460 mm Weight 278 kg Available accessories MK3/B18 drill chuck shank handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2

Condition: good (used), Pile Turner Toppy Twister 1000 AJ Silver h=2000 Fully operational, ready to work. Perfect condition. Year of manufacture: 2016. Made in Italy. This machine has an increased stack height of up to 200 cm. Equipment: Aeration, shaking, side margin. Technical specifications: Format: 1200×800 mm Stack height: 2000 mm Load capacity: 1200 kg Device weight: 1300 kg Power consumption: 9 kW Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, takes up little space. Ksdsyur Iujpfx Aaysdk Includes a ramp.

Condition: new, Year of construction: 2026, The CORMAK PT410S planer-thicknesser with a spiral cutterhead is a professional industrial-class woodworking machine that combines the functions of a jointer and a thickness planer in one compact design. Equipped with a modern spiral cutterhead, it ensures maximum machining precision, exceptional surface quality, and quiet operation. It is an excellent choice for woodworking shops, furniture production, and workshops that value efficiency, accuracy, and reliability. Key advantages of the CORMAK PT410S planer-thicknesser Spiral cutterhead – minimizes noise, reduces cutting resistance, and allows for a perfect wood surface finish, even with difficult species. Quick function change – rapid transition from jointer to thickness planer thanks to separately opening tables and dust extraction cover. Stable construction – heavy cast iron frame and tables ensure rigidity and reduce vibrations during operation. Precise adjustment – clear scale and accurate mechanism for setting planing depth and fence angle. High performance – a motor with power up to 4.0 kW (S6 duty) ensures smooth and efficient machining even of wide workpieces. Construction and technology The CORMAK PT410QS model is designed for long-term, intensive use. Its cast iron jointer tables provide excellent flatness and stability of the workpiece, while the centrally mounted thicknesser table ensures even lifting. The tilting aluminum fence with a precise scale allows angle adjustment from 90° to 45° for proper material guidance. Precision and performance Thanks to the spiral cutterhead with a diameter of 95 mm and spindle speed of 4300 rpm, the thicknesser ensures an even, smooth surface even when working with hard or resinous wood. The feed is smooth, without vibration or risk of tear-out. Planing height adjustment up to 220 mm allows machining of large elements—both solid wood and glued panels. Applications The CORMAK PT410S jointer-planer is ideal for: woodworking and furniture production shops, craft workshops, stair and wooden component production, processing of solid wood and glued panels. This machine is designed for demanding users who are looking for a precise and reliable planer-thicknesser. Standard equipment: cast iron jointer tables, spiral cutterhead, cutterhead guard, dust extraction outlet, feed switch, emergency stop switch. Optional equipment: transport trolley, knife setting jig, mortising attachment. Technical specifications Jointer table size: 1680 × 410 mm Thicknesser table size: 750 × 410 mm Cutterhead diameter: 95 mm Kdedoyy Nl Nepfx Aayek Spindle speed: 4300 rpm Fence tilt angle: 90–45° Dust outlet: 100 mm Max thicknessing height: 220 mm Motor power: 4.0 kW / 400V Max workpiece width: 410 mm Dimensions: 1680 × 1100 × 1100 mm Weight: 360 kg

Condition: new, Year of construction: 2026, A sliding table saw for working with high density boards, MDF boards, ABS and PVC panels, solid wood and other wood-based materials of similar structure and hardness. The saw is designed for small and medium carpentry work. Machine description Strong, solid and compact design ensures convenient and and failure-free operation Sliding table saw mounted on a spindle tilting in relation to the worktable capability Steel, welded body with a permanent cast iron table and a movable table made of strengthened aluminium – the table of this machine is very durable and does not deform Technical parameters CUTTING LENGHT 1600 mm CUTTING WIDTH 1200 mm SAW TILT 0-45° CUTTING HEIGHT AT 90° 80 mm CUTTING HEIGHT AT 45° 56 mm MAX. SAW SIZE 315 mm Kodpetz Srlefx Aayjdk MAX. SCORING SIZE 120 mm MAIN SAW SPEED 4000/6000 obr/min SCORING SPEED 8000 obr/min MOTOR POWER OF CONTINUOUS WORK S1 5,5 kW SCORING MOTOR POWER (CONTINUOUS WORK S1) 0,75 kW WEIGHT 460 kg

Condition: new, Year of construction: 2026, functionality: fully functional, A sliding table saw for working with high density boards, MDF boards, ABS and PVC panels, solid wood and other wood-based materials of similar structure and hardness. The saw is designed for small and medium carpentry work. Strong, professional sliding table saw with a movable table on bars and a separately powered scoring. Saw tilts in the 90–45 degrees range Solid, durable design ensures stability and work safety Controllable speed adjustment Technical data Table dimensions 970×550 mm Sliding table length 3200 mm Cutting width by the fence 1200 mm Transverse cutting by the transverse cutting guide 3100 mm Saw tilt 0°–45° Saw diameter Ø350 mm Saw hole diameter Ø30 mm Saw blade height 0–87 mm Saw blade 350 max height 105 mm Saw blade height at 45° angle 0–60 mm Saw blade 350 max height at 45° angle 73 mm Main saw spindle speed 4000 / 6000 rpm Kdedjtz Smispfx Aayjk Scoring saw diameter Ø125 mm Scoring saw hole diameter Ø20 mm Scoring speed 8000 rpm Main motor power 5.5 kW Scoring motor power 0.75 kW Intake connector under table diameter 100 mm Intake connector diameter in the saw guard 80 mm Machine weight 680 kg Available equipment Cutting saw Scoring Transverse cut fence Longitudinal fence Modern - ergonomic saw guard Worktop extension Fence for mitre cutting Saw blade tilt gauge indicator User manual EC declaration of conformity

Condition: new, Year of construction: 2026, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Kdsdpfoudi Unox Aayek Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: new, Year of construction: 2026, The KS 652 is a double-column, semi-automatic band saw designed as the ideal working tool for professionals who need to cut bars, pipes, profiles, and other metal structural elements — with the ability to cut at angles up to 60° to the left and right. Machine description: Band saws from the KS series are the only machines in their class that allow cutting both to the left and right — simply set and clamp the vise. Once the material is positioned, the operator can set the angle and rotate the bow without reopening the vise or repositioning the bar. The vise moves transversely along the worktable, ensuring quick access. The cutting frame structure, made of electro-welded tubular steel, guarantees high stability during cutting. Like all IMET band saws, the KS model is equipped with high blade tension (2000 kg/cm²) and a 6° inclined saw, which improves material feed, reduces load, and optimizes cutting even for large cross-sections and solid materials. A wide worktable provides full support for the material. The machine is highly user-friendly and easy to operate thanks to the automatic stop system in the 0°–60° left/right range and the angle scale on the table, making it easier to set the cutting position. To increase cutting precision, IMET band saws are equipped with a system for detecting angular deviation from the center. A mechanical material detection system ensures rapid approach to the material by automatically detecting the first contact point. The end of the cut is managed by a microswitch in the blade guide, ensuring precise blade alignment thanks to hardened rollers and auxiliary bearings. All operating parameters and settings are controlled via an independent, mobile console with LED indicators for blade tension, blade guard, motor overheating, and electrical voltage monitoring. The console allows setting of machine operating parameters such as band speed, lowering speed, and cycle end management (options include: bow return with stopped blade, bow return with moving blade, or cycle end without bow return). Cutting performance can be further increased by using a 4 kW motor, a hydraulic blade tensioner, and a high-tension hydraulic system (2200 kg/cm²). Technical parameters: Power supply: 3-phase 400V Total power: 3 kW Arm lowering control: Hydraulic with smooth adjustment Cutting speed: 15–100 m/min Vise base height: 844 mm Blade dimensions: 5320 × 34 × 1.1 mm Dimensions: 1895 × 2870 × 2300 mm Weight: 2100 kg Kdsdpfxeyym I Uj Aayek