Used Cross-Flow Membrane Filtration System for sale (43,246)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Nodpfjzp H R Ejx Aiyjda Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: used, Year of construction: 2014, Overview  The Millichilling ST-12, manufactured in 2014 by Millipore Ibérica S.A.U., is a stainless-steel normal flow filtration (NFF) unit designed for wine clarification prior to microbiological stabilization. It offers a cost-effective, environmentally friendly alternative to diatomaceous earth filters, preserving the wine’s sensory characteristics while supporting continuous operation. This unit is suitable for medium to large-scale wineries and is immediately available. Technical Details  - Capacity: 1,000–1,500 l/h (depending on wine turbidity) - Total Volume: 81 L - Applications: Final wine clarification before bottling — suitable for white, rosé, and red wines - Construction Material: Stainless steel - Max Operating Pressure: 5 bar - Max Temperature: 110 °C - System Type: Normal Flow Filtration (NFF) - Operation Modes: Automatic, semi-automatic, or manual - Design: Fully enclosed system with integrated reverse-flow cleaning Ndsdpew Nkqqsfx Aiyja  

Condition: used, This listing is for a Pall Scientific lm50NCN-B4N Laboratory Filtration System The unit is in full working condition and ready for immediate use This laboratory filtration system is a high-quality lab instrument manufactured by Pall / Pacific Scientific (Model: lm50NCN-B4N). An industrial-grade filtration housing/system designed to provide reliable contaminant removal in bioprocessing or research applications. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Nedpfx Aiozuf Uyoyeda Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for the Millipore MpodPilot Enerpac Pilotscale filtration system The unit is in full working condition and is ready for immediate use The Millipore MPODPILOT is a pilot-scale filtration system designed for laboratory and pilot plant applications. It is commonly used in processes such as microfiltration and ultrafiltration, particularly in the pharmaceutical and biotechnology industries. The system includes a filter holder capable of accommodating pod filters up to 2.2 m² in size Nodpfoxhgaqjx Aiyeda

Condition: good (used), Year of construction: 1992, fully automatic programmable capping with additional line detection for defect capping via LUT system infeed belt 6 m 6 ejection stations total length 12 m Ndodpfsl H E Taox Aiyea The infeed belt is not running at the moment, probably because of the frequency converter.

Condition: ready for operation (used), Year of construction: 2014, A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Nsdjy Eg Dyjpfx Aiyeda

Condition: used, This listing is for Quattro Fluid SystemFlow 1000S Nsdpfx Ajxhfp Reiysda The unit is in full working condition and ready for immediate use This four-piston quaternary diaphragm pump offers gentle, low-pulsation fluid transfer ideal for delicate biological materials, proteins, and cell suspensions in bioprocess applications

Condition: used, Year of construction: 2018, functionality: fully functional, load capacity per storage section: 1,000 kg, total length: 37,030 mm, total height: 4,310 mm, total width: 4,590 mm, shelf height: 4,310 mm, We are offering a used, fully functional flow rack system with a two-level construction (ground floor and upper floor) for sale. This system is perfectly suited for storage and order picking according to the FIFO principle (First In – First Out) and is ideal for logistics, shipping, or manufacturing operations. The racking is optimized for cartons with dimensions of 600 x 400 x 250 mm, accommodating a total of up to 3,000 cartons. Dimensions: The entire system has a total length of approx. 37 m, divided into two sections: one continuous block (approx. 20 m), a staircase section (approx. 1.3 m), and a second block with a walk-through passage (approx. 15.6 m). The total depth is approx. 4.6 m and consists of two racking depths of 1.3 m each, as well as a central service aisle of approx. 2 m. The upright height is approx. 4.3 m; the bottom edge of the intermediate deck (upper floor) is at approx. 2 m, providing sufficient clearance for ergonomic work on the lower level. Configuration and equipment: Each bay is approx. 2.12 m wide (upright width approx. 0.1 m) and contains a total of 10 flow channels – 5 on the lower and 5 on the upper level. Shelf heights are variably adjustable via perforations in the uprights, allowing flexible adaptation to different article sizes. The shelves are equipped with roller conveyors that have a slight incline, ensuring goods and handling units automatically move to the picking side. Access to the upper floor is via an integrated staircase. A central aisle between the rack rows allows loading from the rear and picking from the front. Load capacities (with evenly distributed loads): - Shelf load: 100 kg - Bay load: 1,000 kg - Mezzanine floor: 250 kg/m² Summary of core data: - Total length: 37.03 m - Overall width / depth: 4.59 m Nedpfxjyxqhvj Aiyjda - Upright height: 4.31 m - Headroom lower level: approx. 1.98 m - Bay width: 2.12 m - Shelves per bay: 10 (5 lower / 5 upper) - Roller conveyors: yes, inclined (FIFO) - Shelf load: 100 kg - Bay load: 1,000 kg - Mezzanine floor load: 250 kg/m² The system will be dismantled at its current location prior to collection. Inspection possible by appointment. Self-collection required.

Condition: excellent (used), total width: 1,450 mm, total length: 1,550 mm, total height: 2,500 mm, Ruwac Filter System Used, good condition, see pictures Length 155 m Width 145 cm Height 250 cm 2850 RPM 2 units in stock. Negotiable price: €1,400 net ex warehouse Goods are in stock. Transport and installation available upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Changes and errors in technical data, information, and prices, as well as prior sale, are subject to change! See our general terms and conditions, all prices exclude VAT, ex warehouse.) Lenox Trading – Top storage technology & heavy-duty shelving used & new Ndsdpfxjtwy Rvs Aiyea Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ AVAILABLE IMMEDIATELY: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer loads of goods processed weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether it's pallet racking, heavy-duty shelving, high-bay racking, shelving with adjustable shelves, tire racks or shelving for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty shelving Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi Cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance orders, we offer a comprehensive, worry-free package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock, including complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty shelving or are looking for galvanized heavy-duty shelving / heavy-duty shelving systems – we guarantee the best conditions. Contact us for a non-binding offer!

Year of construction: 2021, condition: ready for operation (used), A laser cross-welding system is offered. Fiber laser 1500W water-cooled, cooling unit integrated, pallet truck guide, shielding gas supply, weld seam pressing device, remote access RMACC01 SECOMEA, strip width max.: 110mm, strip material: steel: 0.25mm-3.0mm, C steel: 0.25mm-2.5mm, aluminum: 0.25mm-2.5mm, copper: 0.20mm-1.2mm, dimensions W/H/L: 650mm/2054mm/1050mm, weight: approx. 650kg. Inspection possible by appointment. Nodpfeyugl Usx Aiyjda

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Nsdpfjxf Up Isx Aiyjda

Condition: ready for operation (used), Year of construction: 2017, operating hours: 26,000 h, functionality: fully functional, machine/vehicle number: M5427F3D01, Flow MACH 500 4020 DWJ Waterjet Cutting Machine Manufacturer: Flow Model: MACH 500 4020 DWJ Year of Manufacture: 2017 Technical Specifications Working area: 4,000 × 2,000 mm Dynamic Waterjet (DWJ) taper compensation cutting head UltraJet 60,000 PSI intensifier pump Abrasive waterjet cutting system Abrasive sludge extraction system Approx. 26,000 operating hours 380–480 V, 50/60 Hz, 3 Phase CE marked Machine Description A well-maintained Flow MACH 500 4020 Dynamic Waterjet cutting system in good working order. The machine is currently installed and can be inspected under power. The Dynamic Waterjet head provides automatic taper compensation, producing highly accurate components with excellent edge quality while reducing secondary finishing operations. Suitable for cutting a wide range of materials including: Stainless Steel Mild Steel Aluminium Titanium Copper & Brass Plastics Composites Glass Stone Ceramics The machine is fitted with an UltraJet 60K intensifier pump and an abrasive sludge extraction system, making it suitable for continuous production environments. Condition Regularly maintained throughout its working life Fully operational Demonstration available by appointment Service history available on request Included Flow MACH 500 4020 Waterjet System Dynamic Waterjet Cutting Head UltraJet 60K Intensifier Pump Abrasive Delivery System Abrasive Sludge Extraction System Nodpfx Aezhkmueiysda Location: Ireland Price: On Request The machine is available immediately. Further photographs, videos, maintenance information and machine demonstrations can be provided upon request.

Condition: used, Year of construction: 1993, Additional title: Microfiltration Material: stainless steel Nedpfxeztwz Ne Aiyjda Base construction: on stainless steel frame with feet Features: 32 filtration modules, pumps, pipes, valves, control cabinet

Condition: ready for operation (used), Year of construction: 2002, A stationary Rippert filter and dust extraction system is available. Filter sections: 4, Filter elements: filter bags, Filter bag dimensions 1 X/Y: 6603mm/1775mm, Filter bag dimensions 2 X/Y: 6603mm/1200mm, Filter area 1/2: 45m²/60m², Regeneration drives: 4, Regeneration drive power: 1.1kW, Rotary valve: ZS 7.5, Motor power: 0.55kW. An on-site inspection is possible. Ndodpfxozhnu Ae Aiyoa

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, filter area: 0.283 m², Nutsche Pressure Filter Vacuum Filter Pressure Nutsche Year of manufacture: 2009 Condition: Used Availability: In stock Documentation: Complete set available Model designation: Pressure Filter Nutsche Vacuum Filter Suction Filter, 62 litre capacity Operational: Yes Filter area: 0.283 m² Material: Stainless steel 1.4404 Total heating/cooling chamber volume (L): 10 Weight (kg): 204 Nodpfxsxxxqvo Aiysda Total vessel capacity (L): 62 Permissible operating temperature vessel (°C): -20/+150 Permissible operating pressure vessel (bar): -1/+6 Permissible operating pressure heating (bar): -1/+6 Permissible operating temperature heating (°C): -20/+150 Design overpressure (bar): 11.5 Support structure: Standing on feet Heating material: 1.4404 Country of manufacture: Switzerland Accessories & fittings: Manometer, safety relief valve, sight glass, ball valve, Camlock coupling, lid opening aid

Condition: used, Year of construction: 2006, operating hours: 107 h, functionality: fully functional, machine/vehicle number: 365591, working range: 4,250 mm, travel distance X-axis: 2,200 mm, travel distance Y-axis: 4,250 mm, travel distance Z-axis: 200 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 100 mm, FLOW Waterjet Cutting Machine IFB-12 – Waterjet System We are selling our Flow waterjet machine with an additional special stainless steel water tank. Food-grade / Industrial / Chemical applications The machine has been in use with us for 2 years. No emergency sale – being sold due to purchase of a new machine. The system is in very good condition Fully functional Manufacturer: Flow Year of Manufacture: 2006 Type: IFB Model: IFB 12’ Base Serial No.: 365591 Laser type: Renishaw Transport dimensions Forklift pockets: 17x10 cm Total height: 220 cm Total width: 480 cm Total length: 450 cm Tank Length: 425 cm Width: 255 cm Data sheet for the machine is available (PDF upon request) Inspection before purchase is possible and encouraged. Nedpfx Asy D A Ifeiyjda Delivery available on request. Sale as-is in condition shown in the pictures.

Condition: excellent (used), Year of construction: 2006, We sell the Mambranpress for kitchen doors, doors, or door frames, etc. Producer ORMA Macchine, Model: PM Air System 25/14 Year 2006. Area 2500 x 1400mm. / 1 Table Ndodpfxjzmnyis Aiysa PIN system for edge binding. Possible to see at work. Documentation included

Condition: used, This listing is for a Merck Samplicity G2 Filtration System. The unit is in full working condition and is ready for immediate release. The Merck Samplicity G2 Filtration System revolutionizes sample preparation for High Performance Liquid Chromatography (HPLC) by offering a vacuum-driven solution that enhances efficiency and user comfort. Key Features: - Vacuum-Driven Filtration: Utilizes a vacuum pump to simplify the filtration process, decreasing the manual effort often required in traditional methods. - Multi-Sample Filtration: Allows filtration of 1 to 8 samples simultaneously, increasing throughput by up to 35%—perfect for busy labs. - User-Friendly Operation: Designed with a simple lever mechanism, enabling quick recovery of clean samples in seconds, which aids in maintaining workflow efficiency. - Millex Filter Compatibility: Fully compatible with Millex filters, ensuring reliability and effectiveness in a variety of HPLC applications. - Ergonomically Designed: Reduces manual strain compared to syringe filtration, promoting better user health and comfort during repetitive tasks. - Applications: HPLC Sample Preparation: - Ideal for preparing samples that require filtration before analysis, particularly those that are viscous or contain particulates. - Filtration of Challenging Samples: Well-suited for samples that are difficult to filter, such as those with high viscosity or substantial particulate matter, ensuring consistent results. Nodpjxxynvofx Aiyeda Key Benefits: - Increased Efficiency:Streamlines the sample preparation process, significantly cutting down on time and effort, allowing for quicker analysis turnaround. - Enhanced Accuracy:Provides reliable filtration, minimizing the risk of contamination or sample loss, crucial for maintaining analytical integrity. - Reduced Manual Fatigue:The design alleviates the physical strain associated with manual filtration methods, improving user comfort and lowering injury risk.

Condition: used, functionality: fully functional, Comac LE 20 is a walk behind floor sweeper / scrubber is a walk-behind scrubber-dryer designed for maintenance cleaning of commercial surfaces, such as retail outlets and gyms, up to 1400 sq.m Ndsdpfxezl E Afj Aiyja

Condition: used, Burkert fluid control systems flow meter Nsdpfxswyfx Ej Aiyjda Pipe size: DN 65 Control system type: SE 56-B1D1B1A40 Flow meter type: SO 56-T65-3A1B VMA Wekerom See our other ads

Condition: excellent (used), Year of construction: 1994, Automatic defect cross-cut system Wood width max. 260 mm Ndsdpfx Aiskv Untjyja Wood height max. 100 mm Saw 7.5 kW Feed 6,9 kW worked 1995 - 2012 approx. 4 hours/day

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, Hello, selling a GAF Duplex candle filter unit. Ndjdpfx Aovl Imkjiyoa Completely made of stainless steel, 1.4404 Condition see photos, EXW Marthalen

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge Ndedpey N Duqjfx Aiysa - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, The water is pressed through the RO membrane by means of a high-pressure pump. The desalinated water/permeate is then led to consumption via a 1000 litre reservoir. The water containing the concentrated salts/concentrate is led to outlet. The relation between permeate/concentrate shall be adjusted manually on the needle valve. Under normal operating conditions the RO membranes have a long lifetime. But even with a good raw-water quality, layers of impurities will, to a certain extent, occur and there will be a slow reduction of the permeate capacity. Nsdpfxjzl E Dis Aiyoda

Condition: excellent (used), functionality: fully functional, overall weight: 45 kg, input voltage: 230 V, VITO XS Vacuum Filtration System The ideal frying oil management solution for commercial kitchens and bakeries The VITO XS frying oil filter is the perfect solution for businesses with larger fryers. With its 40-liter tank and unique vacuum filtration system, it enables efficient and hygienic handling of frying oil in your kitchen. All benefits at a glance: Save up to 50% on frying oil Ensure optimal oil quality Reduce labor Ensure maximum safety in the workplace Ndsdjv Hz Svspfx Aiyja A sustainable solution Digital monitoring via VITOconnect Easy and hygienic transport in the kitchen The X-Series operates according to a simple principle with a focus on oil conservation and safety: The device creates a vacuum and draws the used frying oil through a hose into a closed tank. Since the hot oil is not drained, a safe working environment is created around the fryer. During this innovative oil removal process, the frying medium is passed through an environmentally friendly filter pad. This ensures very fine microfiltration without the use of chemicals or additives. By removing the finest food residue and carbon particles, oil savings of up to 50% are achieved. After emptying, the fryer can be thoroughly cleaned while the oil is stored in the VITO X filter system. After the filtration process, the frying medium is pumped back. The result? Clean oil for a delicious fried product and a satisfied, satisfied customer. Technical Specifications Normal Use: Ideal for restaurants and bakeries or high frying volumes Filter capacity: up to 30 l/min (66 lbs/min) Filtration efficiency: up to 5 µm / 200 µin Pump capacity: up to 35 l/min (77 lbs/min) Tank volume: 40 l / 73 lbs Particle capacity: 10.7 kg Weight: 45 kg / 99 lbs Temperature: max. 200°C / 392°F Material: 1.4301 stainless steel Electrical connection: 1N/PE / 220 - 240 volts / 50 Hz - 60 Hz External dimensions W x D x H: 553 mm x 551 mm x 679.50 mm Lance available optionally (not included) Financing through our bank is also possible. komplett-konzept.leasingo.de Other items - new and used - can be found in our shop! International shipping costs on request!