Used Daewoo Puma 2000 Sy for sale (9,009)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, turning diameter over cross slide: 350 mm, turning diameter: 550 mm, spindle bore: 66 mm, spindle motor power: 15 W, chuck outer diameter: 201 mm, bar diameter (max.): 66 mm, collet bore: 66 mm, controller manufacturer: Fanuc, controller model: Fanuc 21i-T, Equipment: documentation/manual, TURRET POSITIONS: 12 PARTS CATCHER TAILSTOCK Njdpfxsygidkj Am Uswk CHIP CONVEYOR

Condition: ready for operation (used), Year of construction: 2000, operating hours: 2,900 h, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Perfectly functioning machine with sub-spindle, chip conveyor, tool presetting, and set of tool holders and manuals Nedpfx Aoxrgglsm Uewk

Condition: good (used), Year of construction: 2005, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2005 Product number: 05026/4 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns - 1÷4 bar Working air pressure for opening the guns - 5÷6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min ROLLER TRANSPORTER type PRN-6.3 Producer: MCRS Type: PRN-6.3 Njdpfx Aozumvxem Uewk Year of production: 2018 Product number: 18014/1 Working height - 920 mm +/- 50 Roll working width -1610 mm Total width - 1700 mm Roll diameter - 53 mm Total length - 6300 Movement speed - 20 m / min Weight - 320 kg Power supply - 400V 50Hz 6 bar TRANSPORTER PPR1050 Producer: CEFLA Type: PPR 1050+ TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter with a length of 1050 mm and a working width of 1250 mm with two speed ranges: low from 1.7-11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min (for the time of loading into the dryer carousel). Main engine power 1.72 kW. TRANSPORTER TRC2000 Producer: CEFLA Type: TRC 2000/125 Year of production: 2005 Product number: 05026/1 Transporter with a length of 2000 mm and a working width of 1250 mm. The transporter is driven by a 0.25 kW engine and reaches a speed of 1.7-10.7 m / min. CEFLA OVEN (drying room) Producer: CEFLA Year of production: 2005 Machine for the complete or partial drying of paint products that are applied to the parts to be treated, such as linear panels of all kinds. Vertical two-zone platform oven with warm air drying. Evaporation fan flow - 2x8000 m3 / h Drying fan flow - 8000 m3 / h Installed thermal power - 130,000 Kcal / h Total installed power - 17 kW Compressed air consumption - 92 Nl / min Platform length - 3500 mm Overall dimensions - 5192x4120x4524 mm TRANSPORTER TRC3500 Producer: CEFLA Type: TRC 3500 / 2V / 125 Year of production: 2005 Product number: 05026/16 A conveyor with a length of 3500 mm and a working width of 1250 mm with two speed ranges: low from 1.7 m / min and high up to 10.7 m / min - for the time of unloading from the carousel dryer. Main engine power 2.2 kW.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 630 mm, turning diameter: 376 mm, spindle motor power: 18 W, spindle speed (min.): 40 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 81 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, bar passage: 81 mm, total height: 2,170 mm, total length: 4,400 mm, total width: 2,100 mm, overall weight: 6,650 kg, spindle diameter: 254 mm, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​6-axis CNC lathe with counter spindle, live tools and Y-axis and FANUC 0i-TF PLUS CNC Nwsdpfxezrmiaj Am Ujk

Condition: used, Used chamber filter press Andritz/Netzsch 1500x2000 with 125 plates Quantity: 2 available Nedjzlb D Sopfx Am Uswk Press dimensions: Length: 13455 mm x Width: 3125 mm x Height: 4635 mm Empty weight: 51600 kg Filter area: 459 m2 Filter area after expansion: 559 m2 Press volume: 4989 l Press volume after expansion: 6080 l Cake thickness: 25 mm

Condition: good (used), Year of construction: 2004, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2004 Product number: 04177/1 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns -1 ÷ 4 bar Working air pressure for opening the guns - 5 ÷ 6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min TRANSPORTER TRC2500 Producer: CEFLA Type: TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter, 2500 mm long and 1250 mm working width, with two speed ranges: low from 1.7–11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min. Main engine power 1.72 kW. OVEN UNISON 12 M Producer: UNISON Type: UNI-LEVEL 6/12 Year of production: 2010 Length 13500 mm Width 2600 mm Nwsdpozumxmsfx Am Usk Height 2510 mm Weight 6950 kg Power supply 3 x 400 VAC, Hz Air pressure 0.6 Mpa The shelf dryer is used for hot air drying of painted elements in the automatic varnish machine that applies paint coatings using the spray method. The drying room has 6 shelves - each 12.2 meters long. The rated speed of the main conveyor is 4 m / min. TRANSPORTER MCRS PRN 6,3 with belt transformer (II) Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/5

Year of construction: 2001, condition: good (used), Parts shown by hand not come. Nwsdpolyrbzefx Am Ujk Technical book with characteristics of machine is in attachment.

Condition: good (used), Year of construction: 2019, CNC Turning / Millingcenter Machine type: PUMA TT1300SYYB Control: Fanuc 0i-F Year: 2019 Installation: 2024 SPECIFICATIONS Max. turning length: 120 mm Nsdpfx Aezizcvom Uswk Turningdiameter: 175 / 175 mm Travel X-Axis: 135 mm Y-Axis: 80 mm Z-Axis: 530 mm Rapid motion: (X/Y/Z): 30 / 40 m/min. Main Spindle Max. revolution: 6.000 rpm Spindle power: 15 / 11 / 5,5 kW Torque: 116 Nm Bar capacity: 51 mm Subspindle Max. revolution: 6.000 rpm Spindle power: 11 / 7,5 / 5,5 kW Torque: 93 Nm Amount of turrets: 2 Tool capacity: 12 + 12 Tool: BMT 45 Driven Tools revolution driven tools: 6.000 Equipment Chip conveyor High pressure pumps: 30 bar 3-jaw chuck: Samchully x 2 mm Oil mist separator Interface barfeeder Partscatcher Parts ejector High pressure pumps: Brinkmann 30 bar inkl. 5 mü Filter Toolholders: 12 Standard- Klemmhalter

Condition: excellent (used), Year of construction: 2022, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, Nwjdpfszt Spnox Am Uek 24 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, Fanuc I series, 3 jaw chucks, swarf conveyor, tool setter, LNS barfeed unit.

Condition: used, Year of construction: 1996, Technical details: pressure: 300 t chamfer lenght: 6000 mm control: Delem DA 24e distance between columns: 2x5100 mm throat: 645 mm dayligth: 520 mm plate thickness: 5 mm total power requirement: ca. 10,0 je machine kW weight of the machine ca.: ges. ca. 66 t dimensions of machine: L:12,0xB:2,3xH:3,65 m Hydr. Pressbrake 6000-300 - jib arm length= 720mm - incl. back gauge (without crowning system) adjustment travel horizontal/vertical: 680/200mm motoric Optionally, two of these press brakes can be offered - also applicable as a Tandem Pressbrake with 2x 6 meter with 300t, with table size: W:165xL.12000mm, - program sequence via both presse(synchronized) and single available Optional are tools available! Copy of documentation available i.D. * Nwsdpfx Aeu Ib Drjm Usk

Condition: ready for operation (used), Year of construction: 2018, operating hours: 18,845 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, spindle motor power: 33,000 W, controller manufacturer: SIEMENS, controller model: 828D, number of axes: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information. Additional equipment • Mekiload Gantry Loader • Renishaw Equator • Renishaw Equator • Machine includes a rotary indexing magazine • Machine includes a gantry robot Machine Benefits Qualitative Machine Benefits • Tool change time: 1. 0 second • Max speed (station): 5000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump capacity: 1. 5 kw Technical Machine Benefits Nwsdpoyr R A Esfx Am Ujk • Max. Turning diameter over bed: 780 mm • Max. Turning diameter over slide: 630 mm • Max. Turning length: 760 mm • Main spindle torque: 719 nm • Spindle mount (main): a2 #8 • Sub spindle speed: 6000 rpm • Sub spindle power (30 min): 18. 2 kw • Sub spindle torque: 220 nm • Spindle mount (sub): a2 #5 • Number of stations: 24 (12 driven) Extra Information Machine still under power

Condition: like new (used), Year of construction: 2022, operating hours: 942 h, functionality: fully functional, turning length: 600 mm, turning diameter: 230 mm, spindle motor power: 22 W, spindle speed (min.): 50 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 5,000 rpm, rotational speed (min.): 50 rpm, bar passage: 65 mm, total height: 2,100 mm, total length: 5,000 mm, total width: 2,200 mm, overall weight: 8,800 kg, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​8-axis CNC lathe "DN Solutions mod. PUMA TT1800SY" with motorized upper turret equipped with Y axis, motorized lower turret, opposing spindles and DN Solutions-Fanuc i-Plus iHMI CNC. Nodjwuqp Eopfx Am Ujwk

Condition: used, Year of construction: 2017, operating hours: 45,000 h, functionality: fully functional, machine/vehicle number: 17L5M0045, turning length: 490 mm, turning diameter: 395 mm, spindle bore: 61 mm, travel distance X-axis: 235 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 105 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 10 m/min, rotational speed (max.): 6,000 rpm, total height: 2,085 mm, total length: 2,790 mm, total width: 1,752 mm, overall weight: 4,150 kg, The lathe was primarily used for the production of spacers, distance sleeves, and other stainless steel fasteners. It has always been operated by professionals and professionally maintained. Njdpsxylzdefx Am Ujwk

Condition: like new (used), Year of construction: 2020, operating hours: 4,300 h, functionality: fully functional, spindle motor power: 15,000 W, spindle speed (min.): 6,000 rpm, spindle speed (max.): 6,000 rpm, rotational speed (max.): 6,000 rpm, feed length X-axis: 135 mm, feed length Z-axis: 530 mm, bar passage: 51 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 40 m/min, chuck outer diameter: 152 mm, bar diameter (max.): 51 mm, overall weight: 8,100 kg, Equipment: documentation/manual, We offer this DOOSAN PUMA TT1300SYYB CNC turning and milling center, in like-new condition, manufactured in 2020. Manufacturer: DOOSAN Model: PUMA TT1300SYYB Year of manufacture: 2020 Condition: Like new Category ID: 1128 Type ID: 2239 Machine type: CNC turning and milling center If you have any questions or need more information, please do not hesitate to send us a message or call us. A nearly new DOOSAN PUMA TT1300SYYB from February 2020 is for sale, with the option to purchase an LNS SPRINT 565 S2 automatic bar feeder for an additional €20,000. It has 6 motorized tool holders (3 axial and 3 radial) and only 3,800 cutting hours. This is a high-end, multitasking CNC lathe with a double spindle and double motorized turret with a double, independent Y-axis in both positions. A unique machine in its category, designed for complete machining in a single setup. -Synchronized double spindle -Double turret with motorized tools -Upper and lower Y-axis (SYYB configuration) -Simultaneous machining of both sides -Drastic reduction of cycle times -High precision and thermal stability -Spindle speed up to 6,000 rpm -Bar capacity up to Ø51 mm -2 Hainbuch tool holders Nwjdpfxeyryyme Am Ujk Special price: 140,000 EUR, WORKING HOURS: ONLY 3,800 CUTTING HOURS. Available for inspection and operational testing. Simultaneous machining with two turrets. Automatic transfer between main and sub-spindle. Possibility of completing the entire part in a single operation. Ideal for use with a bar feeder. Significant reduction in cycle times compared to a single-spindle lathe.

Condition: used, Year of construction: 2002, feed length Y-axis: 1,200 mm, feed length Z-axis: 900 mm, Make: Daewoo-Doosan Model: PUMA V-1200M Category: Vertical CNC Turning Center Year of manufacture: 2002 CNC Control: FANUC Series 18-T Machine weight: 23,000 kg Machine dimensions Length: 8,500 mm Width: 4,900 mm Height: 5,650 mm Capacities Maximum turning diameter: Ø 1,600 mm Maximum machining diameter: Ø 1,600 mm Maximum machining height: 1,200 mm Maximum load on spindle: 6,000 kg Main spindle Chuck diameter: Ø 1,200 mm Spindle speed: 2 ÷ 320 rpm Number of ranges: 2 Motor power: 37/45 kW (continuous / 30 min) Powered spindle (RAM) Tool holder: ISO-50 Speed: 15 ÷ 1,500 rpm RAM section: 240 × 240 mm Travels X-axis: 1,200 mm Z-axis: 900 mm C-axis: 360° (minimum resolution 0.001°) Feed rates Rapid traverse X/Z axes: 10,000 mm/min Working feed rate X/Z: 3,000 mm/min Turret Number of stations: 16 Tool holders: BT-50 Drawbar type: 403 P50T-I Maximum tool diameter: Ø 400 mm Maximum tool length: 450 mm Maximum tool weight: 50 kg Maximum tool weight in the magazine: 600 kg Nwodpfsziavnox Am Uok Accessories Chip conveyor Coolant tank with washing pumps Spindle line cooler Powered and fixed tool holders Manuals, electrical diagrams, and CE Declaration.

Year of construction: 2021, condition: ready for operation (used), - USED - 8-AXIS TWIN-SPINDLE CNC LATHE WITH DOUBLE TURRET HEAD MAX ROTATING DIAMETER: 230 mm MAX TURNING LENGTH: 230x2 mm MAX TURNING DIAMETER: 230 - 230 mm BAR CAPACITY: 81 mm SPINDLE: 3500 rpm; 18,5-22 kW; 244 Nm; ASA A2-8 COUNTER SPINDLE: 5000 rpm; 15-18,5 kW; 223 Nm; ASA A2-6 X1-AXIS TRAVEL: 165 mm X2-AXIS TRAVEL: 165 mm Y1-AXIS TRAVEL: ±50 mm Y2-AXIS TRAVEL: ±50 mm Z1-AXIS TRAVEL: 700 mm Z2-AXIS TRAVEL: 700 mm B-AXIS TRAVEL: 730 mm RAPID FEEDS X-Y-Z: 30 - 15 - 40 m/min DRIVEN TURRET HEAD: BMT55P ; 24 + 24 POS; 5000 rpm; 7,5 kW HIGH PRESSURE COOLANT: 35 Bar CONTROL UNIT: DOOSAN FANUC i-series Nwodpfozbnrpjx Am Usk WEIGHT: 9600 Kg OVERALL DIMENSIONS: 3880 x 2360 x 2250 mm ACCESSORIES: PARTS CATCHER ; SWARF CONVEYOR ; PIECE CONVEYOR ; TOOL SETTER ; LINEAR SCALES

Condition: new, Year of construction: 2025, Hand pallet truck 2000 kg LWPW with weighing system, new 2025. Continuous stock, see our website. Prices are ex Nuland. Van de Wert Trading B.V. has a variable stock of machines, trucks, trailers, and attachments. All deliveries are offered at trade prices in AS-IS condition without warranty. (see our general terms and conditions) For a viewing and/or test drive, you can schedule a non-binding appointment. Please call in advance, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 Nwjdpfx Amox Td Dtj Ujk 5391 LR Nuland

Condition: ready for operation (used), Year of construction: 2016, operating hours: 28,151 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, controller manufacturer: FANUC, controller model: F31iB with Celos, number of slots in tool magazine: 32, number of axes: 6, This 6-axis DMG MORI NZX 2000/800SY was manufactured in 2016. It features a maximum turning diameter of 320 mm and a swing over bed of 800 mm. The machine is equipped with dual turrets, each with 16 stations, and offers high-speed canned cycle capabilities. If you are looking to get high-quality turning capabilities, consider the DMG MORI NZX 2000/800SY horizontal turning machine we have for sale. Contact us for further details. • Number of turrets: 2 • Number of tool slots: 2 x 16 stations • Main electronic connection: Transformer 95 kVA Nwedpfxjzkrqyo Am Usk • Chip conveyor: Yes • 4 x angel live tools will follow • 6 x straight live tool holder will follow • 2 x angel C4 Capto live tool holder will follow • 10 x capto fix tool holders will follow • Possible to buy also robot solution • Well maintained • Only running stainless steel since day one • Chuch high/low pressure both spindles • Spindle 2 tailstock spec • 7 MPa high pressure Knoll system • Coolant gun • Coolant float switch • Chuck top coolant both spindles • Airblow for tool tip both turrets • Airblow for chuck spindle 1 • Oil skimmer • Autodoor • Robot IF • Ethernet IF • Safety fence IF • Barfeeder IF • 10 external M codes • Handwheel • Spindle orientation both spindles • Text engraving function • High Speed canned cycle • Program restart • Island open pockets • 1 mB storage • Additional workpiece coordinate 48 sets • Tool offsets 200 sets • Swing over bed = 800 mm • Swing over cross slide 800 mm • Maximum distance between nose 1130 mm • Max turning diameter 320 mm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2005, The machine is in good working condition; testing is possible upon prior arrangement. SPACESAVER SS 2101. Fanuc MSX-850 control system. Nedoznl Nqepfx Am Uowk

Condition: excellent (used), Year of construction: 2016, operating hours: 9,000 h, functionality: fully functional, turning length: 510 mm, turning diameter: 360 mm, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, bar diameter (max.): 66 mm, CNC turn-mill center DMG MORI NLX 2000 / 500 SY Year of manufacture: 2017 Control system: Celos with Mitsubishi M 7300 Operating hours: 24,800 h Program running hours: 9,000 h Main spindle speed: 0 - 5,000 rpm Drive power: 11/15 kW Counter spindle speed: 0 - 4,500 rpm Drive power: 7.5/11 kW Bar diameter (main spindle): 66 mm Bar diameter (counter spindle): 43 mm Nsdpfozfguvsx Am Uswk X-axis: 260 mm Y-axis: +/- 50 mm Z-axis: 590 mm Turret: 20 stations Speed: 0 - 10,000 rpm Drive power: 3.5/5.5 kW Accessories: - High-pressure system 40 bar - Tool measurement system - Chip conveyor - Bar loader LNS - Workpiece collection tray

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 780 mm, turning diameter: 376 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, 6-axis CNC lathe with sub-spindle, driven tools and Y axis Nsdotvl U Hspfx Am Uewk

Condition: used, Büchel SH-2000-PEV Electrostatic Air Filter Extraction System Extraction capacity: 2000 m³/h Nodpezk H I Hofx Am Uewk Top performance and easy maintenance thanks to the filter inserts and adjustable exhaust air flow via the pod. Used, as shown in the pictures. From warehouse stock (may have storage marks). Please refer to the pictures for further technical information. Scope of delivery as shown in the pictures. The invoice will be enclosed with the shipment.

Condition: used, Year of construction: 2009, Painting system Manufacturer: Cefla Type: Easy 2000D Year of manufacture: 2009 Painting line consisting of: - Infeed conveyor with light barriers Njdpfxozuzt Ej Am Uswk - Dust removal brush machine - Spray booth with two automatic spray arms, each equipped with six spray guns - Steel belt conveyor for collecting excess paint that does not adhere to the workpieces - Automatic transfer conveyor to the drying oven - Three-chamber drying oven for painted parts - Outfeed conveyor from the drying oven Including: - Heat recovery unit (recuperator) - Extraction system for volatile substances - Dust extraction system for the infeed table Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, total height: 2,250 mm, total width: 2,360 mm, controller manufacturer: FANUC, product length (max.): 3,880 mm, number of axes: 8, This 8-axis DN SOLUTIONS PUMA TT2100SYY was manufactured in 2023. As new, showroom model. It features a twin-spindle and twin-turret configuration, with a maximum spindle speed of 5,000 RPM and a bar capacity of 65 mm. The machine is equipped with 24 turret stations and high-rigidity linear roller guides for enhanced stability. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA TT2100SYY turn-mill centre we have for sale. Contact us for further details. • Chuck size: 8" (204 mm) • Bar capacity: 65 mm • X1/X2 travel: 165 / 100 mm • Z1/Z2 travel: 700 / 700 mm • Y1/Y2 travel: 30 / 40 mm • Spindle motor power: 22 / 18.5 / 15 kW • Turret stations: 24 (12 + 12) • Turret interface: BMT 55 • Guideway type: High-rigidity linear roller guides • Spindle type: Integral motor spindle with wide speed range • Turret capability: Upper and lower turrets with Y-axis and 12 driven stations each • Structural design: Highly stable Y-axis design for high-volume serial production Additional equipment • Cooling and filtration: High-pressure coolant through turret; Oil skimmer • Sub-spindle features: Coolant supply through sub-spindle; Parts ejector • Parts handling: Parts catcher; Parts conveyor for both spindles • Calibration: Tool setter (auto-electric) • Automation and interfaces: Air conditioning (electrical cabinet); Bar feeder interface; 3-color tower light • Optional: Chip conveyor (hinge belt conveyor). Price on request • Machine is delivered with standard basic package: Turret fully equipped, base holder included. • Optional: • 5 pcs. External turning tool holders SQ20, BMT 55 (500-0696) • 2 pcs. Facing tool holders R/L (500-0701) • 1 pc. Double external turning tool holder HS/GS (500-0868) • 2 pcs. Double external turning tool holders HS (500-0705) • 1 pc. Parting tool holder (500-0709) • 7 pcs. Boring bar holders; BMT 55 ID 32 (500-0698) • 2 pcs. Triple internal turning tool holder GS (500-0707) • 2 pcs. Cover IK (500-0711) • 1 pc. Reducing sleeve set Boring (n/a) • 2 pcs. Reducing sleeve set OD 32 ID 20/25 (500-0710) • 1 pc. Adapter set PRECI-FLEX ER25 (BMT 55P) (500-0523) • 2 angled externally cooled external heat sinks Eppinger • 2 straight externally cooled external heat sinks Eppinger Additional Information As new, showroom model Nwsdsyrtbqjpfx Am Uok Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 26,000 W, spindle speed (max.): 3,500 rpm, bar diameter (max.): 76 mm, total width: 2,210 mm, total height: 2,480 mm, overall weight: 12,700 kg, controller manufacturer: FANUC, controller model: Series 31i-MODEL A, product length (max.): 4,050 mm, number of axes: 8, This 8-axis DOOSAN PUMA TT2500SY was manufactured in 2008. It features a maximum turning diameter of 390 mm on the upper turret and 300 mm on the lower turret, with a maximum turning length of 350 mm. The machine includes a robust tool turret with 24 stations and a rapid traverse speed of 20 m/min for X1 and X2 axes. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA TT2500SY multi-spindle turning machine. Contact us for further details. • Number of axes: 8 (X1, X2, Z1, Z2, Y, B, C1, C2) • Swing over bed: 800 mm • Swing over saddle: 620 mm • Max. turning diameter: Upper turret 390 mm; Lower turret 300 mm • Recommended turning diameter: 255 mm • Max. turning length: 350 mm • Main/left spindle motor power (30 min / cont): 26 / 22 kW • Main/left spindle nose: ASA A2-8 • Right/sub spindle max. speed: 3500 rpm • Right/sub spindle motor power (30 min / cont): 26 / 22 kW • Right/sub spindle nose: ASA A2-8 • C-axis indexing (C1 & C2): 360° in 0.001° increments • Upper turret travel (X1/Z1/Y): 255 / 800 / 120 mm (±60 mm Y) • Lower turret travel (X2/Z2): 190 / 900 mm • Sub-spindle B-axis travel: 810 mm • Rapid traverse (X1/X2): 20 m/min • Rapid traverse (Z1/Z2/B): 24 m/min • Rapid traverse (Y): 7.5 m/min • Turret stations: 24 total (12 upper + 12 lower) • Tooling type/interface: BMT65P • Indexing time: 0.2 s • Rotary tool spindle speed: 4000 rpm • Rotary tool motor power (15 min / cont): 5.5 / 1.5 kW • Machine electric power supply: 95.77 kVA Additional equipment Nwsdjznwf Depfx Am Usk • Chip conveyor • Various static tool holders • Rotary live tool holders • Chucks on both spindles Technical Specification Counter Spindle Yes Driven Tools Yes