Used Dega Dega Dg304 7.5Kw for sale (226)

Condition: used, • Maximum dimensions: 1800 x 2500 mm • Maximum load capacity: 3,000 kg • Price on request Bsdpfjxt Ev Ijx Aigowr

Condition: used, functionality: fully functional, power: 7.5 kW (10.20 HP), protection type (IP code): IP54, VEM KPER 132 SX2 7.5 kW functionally tested Bsdpfxsx H N Dls Aigowr

Condition: used, Water degassing (deareation) system for removing oxygen from drinking water, mainly built in 1995. The system operates using a two-stage cold degassing process involving counter-current stripping with CO₂ and consists of the following components: - 2 degassing vessels connected in series - Vacuum pump with separator - 70 hl holding tank (Gross, 2018) for storing degassed water at up to 4 bar overpressure. - Centrifugal pumps - CO2 dosing via needle valve - Pipe panel, various pipework, valves, fittings, measurement and control technology - Control cabinet with Simatic S5 control system Bodpfx Aisy Ti Ansgjwr Capacity: 20000 l/h Gross volume deareation vessels each: 285 l ; overpressure up to 1 bar Gross volume buffer tank: 7060 l ; overpressure up to 4 bar Residual oxygen content appr.: 0,010 - 0,015 mg/l Operation / Control: Simatic S5 Material: stainless steel Position: mounted on stainless steel frame with feet Features: 2 x degassing vessels; pressure tank; centrifugal pumps; vacuum pump with separator; CO₂ dosing (via needle valve); flow, pressure and level measurements; switch cabinet; pipe panel; various pipework, valves and fittings Additional title: cold degassing via CO2-Stripping

Condition: used, Year of construction: 2004, Additional title: water deaeration Capacity: 50 hl/h O2-contents after deaeration: 0,5 ppm Temperature: 16 °C Pressure: 4 bar Power: 1,0 kW Bwsdpoxw R Rxefx Aigsr Voltage: 380 V Frequency: 50 Hz Operation / Control: Fully automatic / Steuerung S7 Material: Frame: 1.4301, pipes: 1.4404 Features: Water line (pneumatic flap valves, flow meter, check valve, sampling valve), membrane module (water inlet from below), CO2-line (flap valve, pressure reduction valve, flow meter, manual regulation valve) Vaccum line (Flap valve, vacuum pump (ELMO), manual regulation valve), plate heat exchanger (Thermowave), pressure boosting pump (Hilge, 4,5 bar with 250 hl/h, 7,5 kW motor)

Condition: used, Liter per hour: 7000 Bedpfoxytwyex Aigswr

Condition: new, ABEL degassing valve for ABEL piston diaphragm high pressure pumps. NEW ! Bedpfx Aoiyqi Noigswr We are your supplier for ABEL piston diaphragm high pressure pumps and service and spare parts partner for ABEL pumps. Spare parts available from stock or at short notice.

Condition: new, ABEL degassing valve for ABEL piston diaphragm high pressure pumps. NEW ! We are your supplier for ABEL piston diaphragm high pressure pumps and service and spare parts partner for ABEL pumps. Spare parts available from stock or at short notice. Bedpfeiyqi Eox Aigewr

Condition: new, Year of construction: 2026, machine/vehicle number: KF0409HKP20260601, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 10 mm/s, reverse speed: 170 mm/s, throat depth: 400 mm, total length: 1,685 mm, total width: 2,300 mm, working width: 3,200 mm, workpiece length (max.): 3,200 mm, workpiece height (max.): 370 mm, bending angle (max.): 90 °, number of spindles: 4, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 4 mm, warranty duration: 12 months, Mechanical Structure 1. Frame: Integral thick steel plate welded structure with shot blasting stress relief, high torsion resistance, stable long-term precision; processed by large CNC boring & milling machine. 2. Sliding ram: Connected to cylinders via spherical joints; self-lubricating rectangular guide rails; fitted with 0.005mm grating scales on both sides for synchronous closed-loop detection. 3. Worktable: Equipped with motor-driven integral mechanical crowning wedge to compensate deflection. 4. Backgauge: Servo-driven ball screw with dual linear guides, modular multi-axis expandable design, fast and high-precision positioning. 5. Tooling & accessories: Quick clamping upper dies, dual V lower dies for fast mold change; adjustable front support stand with horizontal & vertical movement. 6. Anti-deviation structure: Dual-side grating scales eliminate throat deformation interference, strong anti-unbalanced load capacity. 7. Cantilever operation box conforming to ergonomics for easy operation. Hydraulic System 1. Integrated PHUCHIN hydraulic manifold, compact layout and zero leakage. 2. Original SKF/PARKER sealing rings for long service life. 3. Special oil tank with high cleanliness; oil level & temperature visual display; built-in overload protection. Bedpfswfwkwsx Aigjwr Electrical & Control System 1. Main SCHNEIDER electrical components, anti-interference and safe. 2. Movable foot switch with emergency stop; neat heat-dissipating electrical cabinet wiring. 3. DA53T CNC Controller (4+1 axes standard, expandable to 6+1 axes): - 15-inch color LED touch screen, multi-language support, mouse compatible - Storage: 999 workpieces, 20 upper molds + 20 lower molds, 100 programs with 25 steps each - Multiple ports: USB, RS232, Ethernet; supports robot linkage & automatic production line connection - Real-time mold graphics, programmable step speed, dual-machine linkage function Core Component Brands Hydraulic system: PHUCHIN/Bosch Rexroth; Oil pump: Hi-Tech/SUNNY; Grating scale: Italy GIVI; Seals: SKF/PARKER; Electric parts: Schneider; Main motor: Siemens/Lido Other Advantages - Comply with national JB & GB standards for press brakes; Noise ≤82dB(A) - 12-month warranty; 8-hour response & 24-hour on-site after-sales service 二、.Technical Parameters 1. Rated bending force: 1000KN 2. Max bending length: 3200mm; Column distance: 2700mm 3. Ram stroke: 200mm; Max opening height: 450mm; Throat depth: 400mm 4. Speed: Rapid traverse 180mm/s, working speed 0–10mm/s, return speed 170mm/s 5. Main motor power: 7.5KW; Power supply: 380V/50Hz three-phase 6. Precision Index - Y1/Y2 ram positioning accuracy: ±0.02mm; Repeat positioning: ±0.01mm - Workpiece angle tolerance: ±30' full length - X-axis backgauge repeat accuracy ≤±0.01mm; R-axis ≤±0.02mm 7. Environment requirements: Temp -5℃ ~ 40℃, humidity 55–85%RH, altitude ≤1000m 8. Standard axes: Y1,Y2,X,R,V (4+1 axes)

Condition: excellent (used), Catalogue number: 7649 TECHNICAL DATA Bodpfozrm T Sox Aigswr Infeed width: 900mm Infeed height: 300mm Shaft width: 1030mm Shaft diameter: 700mm Knife length: 1030mm Number of knives: 3 pcs Screen dimensions: 70x70mm Bottom: 2 toothed feed rollers Bottom roller motor: 7.5kW Top: 2 toothed feed rollers Top roller motor: 7.5kW Belt conveyor Redler chain conveyor 5600mm + 10600mm 2.2kW Infeed belt width: 800mm Main motor: 90kW Reverse operation Total machine dimensions (L/W/H): 3300x3100x1700mm Shredder base dimensions: 3300x2080x1940mm Feeder / redler dimensions (L/W/H): 5600x900x1000mm + 10600x1050x1600mm Base dimensions for infeed belt: 5100x1300x2520mm Total weight approx.: 16000kg ADVANTAGES – German-made – Redler chain conveyor equipped with scrapers – Reverse operation – DTR technical documentation – Used shredder in very good condition Net price: 219,900 PLN Net price: EUR 52,350 (at EUR 4.2 exchange rate) (Prices may vary with significant fluctuations)

Condition: excellent (used), WEINIG HYDROMAT 22 AL four-sided planer - max. width of workpiece: 220mm - max. height of workpiece: 130mm - 8 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 130mm, 7.5kW 3) vertical left 130mm, 7.5kW 4) vertical right 130mm, 5.5kW 5) horizontal upper 220mm, 11kW – 5th spindle electrically adjustable up/down Bwodpfx Aiezrladsgsr 6) horizontal lower 220mm, 5.5kW 7) horizontal lower 220mm, 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) universal 220mm, adjustable 360°, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - top: - 6 infeed rollers, double-toothed, pulling + 1 single - 3 outfeed rollers, pulling, rubber, smooth double + 3 single - meter counter - bottom: - infeed roller, toothed, pulling, swiveling in the lower bed - 3 metal rollers, pulling, smooth - feed on Cardan shafts - rollers pneumatically pressed - stepless feed speed adjustment + 2 speeds 10-60m/min - feed motor 10kW - electric setting of planing thickness - body lifting motor 0.75kW - central lubrication of the bed - diameter of extraction nozzles 5x140mm, 3x 120mm - machine dimensions L/W/H 4680x1780x1850mm - control cabinet dimensions (on pallet) 1020x1000x2230mm - weight approx. 5000kg - Infeed conveyor with centering device: - roller width 450mm - 1 toothed pulling roller at the inlet - 22 smooth pulling rollers - adjustable top pressure - conveyor length 9020mm - stepless speed adjustment 10-60m/min - motor 0.75kW - dimensions L/W/H 9020x790x1150mm Net price: 179900 PLN Net price: 42850 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), Catalog number 7995 TECHNICAL DATA - max. planing width 240mm - max. planing height 140mm 4 spindles: 1) horizontal bottom 240mm, 5.6kW 2) vertical right 140mm, 5.6kW 3) vertical left 140mm, 7.5kW 4) horizontal top 240mm, electrically adjustable up/down, 0.37kW - 7.5kW - diameter of all spindles 40mm - all spindles adjustable up/down and right/left - from above, 5 toothed, twisting feed rollers, including 1 double roller - from above, 2 rubber feed rollers - from below at the outlet, a split metal feed roller - rollers are pneumatically pressed - 3 side pressure rollers - electric adjustment of planing thickness, 0.37kW - length of infeed table 2080mm - stepless feed rate adjustment via frequency inverter - feed via Cardan shafts - feed motor 3.7kW - central lubrication - diameters of dust extraction nozzles 4x125mm - dimensions L/W/H 3600x1650x1700mm - weight approximately 3000kg ADVANTAGES – German-made, GUBISCH brand – with 4 heads Bedpfx Aiezrk Umogewr – DTR documentation available – used planer, very good condition Net price: 32900 PLN Net price: 7840 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Catalog number: 8061 TECHNICAL DATA - max width of workpiece: 230mm - max height of workpiece: 130mm - 5 spindles 1) horizontal lower: 230mm, 4kW 2) vertical right: 130mm 3) vertical left: 130mm (spindles 2 and 3), 11kW 4) horizontal upper: 230mm, 5.5kW 5) horizontal lower: 230mm, 7.5kW - all spindles adjustable up/down, right/left - spindle diameter: 40mm - 4 infeed rollers from above, geared - outfeed roller from above, pulling, rubber, smooth - feed on cardan shafts - pressure rollers pneumatically actuated - stepless feed speed adjustment via frequency inverter - feed motor: 4kW - operating pressure: 6-10 bar Bwodpfezrgarsx Aiger - electric adjustment of planing thickness - central lubrication of the table - length of infeed table: 1970mm - diameter of dust extraction nozzles: 5x140mm - dimensions (L/W/H): 3400x1660x1600mm - weight: approx. 2500kg ADVANTAGES – German production, WEINIG brand – 5 heads – DTR documentation – used planer, very good condition Net price: 45900 PLN Net price: 10929 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 8060 TECHNICAL DATA - max. width of workpiece: 230mm - max. height of workpiece: 180mm - number of spindles: 5 1) horizontal lower: 230mm, 7.5kW 2) vertical right: 180mm, 5.5kW 3) vertical left: 180mm, 5.5kW 4) horizontal upper: 230mm, 7.5kW - 4 spindles with electric up/down adjustment from the control panel 5) horizontal lower: 230mm, 7.5kW - all heads adjustable up/down, left/right - spindle diameter: 40mm – top: - 6 feed rollers, toothed, including 2 double rollers - 2 feed-out rollers, rubber – bottom: - feed roller, toothed, driven, with swivel mechanism in the lower table, in front of the first spindle - 2 pneumatic side pressure rollers - feed-out roller, metal, smooth - all rollers with pneumatic pressure - length of feed table: 2180mm - table adjustable up/down - central lubrication - electric adjustment of planing thickness - lifting motor approx. 1.1kW - stepless feed speed control via frequency inverter - feed motor: 3kW - feed via Cardan shafts - enclosed in a cabinet - diameter of dust extraction nozzle: 5x150mm - dimensions (L/W/H): 4100x1750x1900mm Bwedpfx Ajzrf Uzjigsr - weight approx. 3800kg ADVANTAGES – with 5 heads – ideal for wet and dry wood – DTR documentation – used machine, very good condition Net price: 68900 PLN Net price: 16405 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7732 Bwodpfx Ajzhvaaeigsr TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70mm - tank diameter: 1200mm - output: approx. 70kg/h - fully automatic machine operation - motor: 7.5kW - max working pressure: 150 bar - suction outlet diameter: 90mm - filter bag opening diameter: 500mm - max bag height: 900mm - dimensions (LxWxH): 1950x1400x2700mm - weight: 1130kg ADVANTAGES - Italian-made - direct connection to sawdust extraction possible - used briquetting press - operating & maintenance documentation (DTR) - condition: very good Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7153 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70mm - Hopper dimensions (H/W): 920x870mm - Output: approx. 110kg/h - Automatic machine operation - Oil cooler - Oil pre-heating Bjdpezh H Rijfx Aigowr - Inspection window - Motor: 7.5kW - Dimensions (L/W/H): 1750x1300x1460mm - Weight: 825kg ADVANTAGES – Unpainted – Italian production – Used briquetting press – Very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR exchange rate (Prices may vary in case of significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7130 TECHNICAL DATA - Maximum working width: 800mm - Maximum working thickness: 200mm Top section: - Pawls - Toothed feed roller - 3 rows of pressure rollers - Planing shaft 810mm, for 4 knives (2 blades fitted), approx. 7.5kW - Pressure - Smooth, metal feed roller Bottom section: - Adjustable infeed table with slip roller - Planing shaft 810mm, for 4 knives (2 blades fitted), 7.5kW - Smooth, metal slip roller - Electric table raising - Extraction nozzle diameter: 120mm - Dimensions (L/W/H): 1900x1450x1350mm - Weight approx. 2500kg – Czech manufacture Bodpfxszh I Amo Aigewr – Very good condition – Used planer Net price: 33,500 PLN Net price: 7,970 EUR depending on EUR 4.2 rate (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7964 TECHNICAL DATA - max. width of workpiece: 630mm - max. thickness of workpiece: 250mm - top: - toothed feed roller - pressure rollers - pressure pad - toothed feed roller, 2 pcs - pressure pad - 4-knife planing shaft, 630mm, 15kW - pressure pad Bwjdpfxezfi E Rs Aiger - smooth feed roller - bottom: - adjustable infeed table - toothed feed roller - 4-knife planing shaft, 630mm, 7.5kW - adjustable feed roller in the bottom table, 2 pcs - electric height adjustment - lifting motor 0.65kW - 6 feed speeds - feed motor 4kW - diameter of dust extraction nozzle 2x160mm - dimensions (L/W/H): 1780x1850x1700mm - weight approx. 3000kg ADVANTAGES - manufactured by the German brand KUPFERMUHLE - very good condition - used planer Net price: 37900 PLN Net price: 9024 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7663 TECHNICAL DATA - max planing width 510mm - max planing height 200mm – from above: - feed rollers - toothed infeed roller - pressure rollers, 2 rows - toothed infeed roller - pressure roller - planing roller 510mm, 4-knife, 7.5kW motor - pressure rollers - smooth, outfeed roller - outfeed pressure roller, 2 pcs - smooth feed roller – from below: - pressure roller Bwedpfozfiwyjx Aigor - adjustable infeed table + slip roller - planing roller 510mm, 4-knife, 5.5kW motor - 2 slip rollers, smooth - side pressure roller – from the rear: - side spindles 1) vertical right 140mm, 4kW 2) vertical left 140mm, 4kW - spindle diameter 40mm - 4-knife cutter heads fitted, height 120mm - spindles adjustable up/down, right/left - stepless feed rate adjustment - electric table lifting - dust extraction port diameters 3x150mm, 1x110mm - dimensions L/W/H 2300x1700x1700mm - weight 2200kg ADVANTAGES - ideal for processing flooring - electric table lifting - Czech production - used planer, very good condition Net price: 36900 PLN Net price: 8786 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to larger fluctuations)

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 88271, turning diameter over cross slide: 180 mm, turning diameter: 42 mm, spindle bore: 180 mm, spindle speed (min.): 6,000 rpm, travel distance X-axis: 160 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 260 mm, spindle motor power: 7 W, rotational speed (min.): 60 rpm, rotational speed (max.): 6,000 rpm, total height: 20,330 mm, total length: 3,420 mm, total width: 1,850 mm, type of input current: three-phase, overall weight: 6,000 kg, Equipment: documentation/manual, Control: Brand & Model FANUC 31i Controller incl. Dynamic graphics display, 10.4” LCD Max. diameter Ø 180 mm Max. machining diameter over the body Ø 180 mm Max. turning diameter Ø 180 mm Chuck diameter 6” Max. workpiece length 180 mm Diameter of workpiece bar material Ø 42 mm Spindle motor FANUC α P12i AC Spindle motor power 5.5/7.5kW Spindle speed range 60~6000rpm Guide type Linear & box ways Travel on X1-axis 160mm Travel on X2-axis 160mm Travel on Y1-axis 60mm(±30) Travel on Y2-axis 60mm(±30) Travel on Z1-axis 210mm Travel on Z2-axis 260mm Rapid traverse on X-axis 15m/min Rapid traverse on Y-axis 10m/min Rapid traverse on Z-axis 36m/min Turret Number of positions 12 Number of rotary positions 12 Rotary position speed 4,000 rpm Power of rotary position motor 3.7 kW Tool change time 0.2sec/single step OD tool shank size 20 mm ID tool shank size Up to Ø 25mm Live tooling shank size 1~16mm ER 25 collets Total installed power 38 kVA Machine weight 6000kg Dimensions LxWxH 2565x2030x1850mm Dimensions with chip conveyor 3420x2030x1850mm Description of basic package and standard accessories 6” hydraulic cylinder x 2 12-position turret x 2 Fanuc αP12 AC spindle motor Thread cutting/Spindle orientation High-precision NSK linear guides Fanuc AC servo drive motors C3 class ball screw pairs Coolant system with “Grundfos” ¾ HP coolant pump x2 Hydraulic system Protective screen – full enclosure Automatic guide lubrication system Tool holders and sleeves Signal lamp Bwsdpfezq Rm Tjx Aiger Work lamp M code automatic power off Foot pedal for chuck RS-232 interface Cooler for the electrical cabinet Foundation and leveling elements Machine maintenance tool kit Machine operating manuals Bar feeder (3 m material length)

Condition: excellent (used), Catalogue number 7988 TECHNICAL DATA - spindle width: 510mm - 4-knife planing shaft - max thickness of workpiece in thicknesser: 200mm - max thickness of workpiece on side heads, 3-sided: 100mm From above: - pawls - toothed infeed pulling roller - planing shaft - pressure beam - smooth outfeed pulling roller From below: - 2 adjustable rollers in lower table - guide rail From rear: - 2 side spindles + pressure beams - spindle height: 100mm - max spindle spacing: 510mm - spindle diameter: 30mm - manual left/right spindle adjustment - motor approx. 2x3kW - main motor: 7.5kW - exhaust port: 2x120mm - overall dimensions (L/W/H): 1700x1200x1000mm - weight: 1060kg ADVANTAGES – made in Poland – 4-knife shaft – DTR documentation – very good condition – used planer Net price: 12,900 PLN Bsdpfx Aiszc Nk Njgswr Net price: 3,070 EUR at 4.2 EUR rate (Prices may change with larger fluctuations)

Condition: excellent (used), CATALOG NUMBER: 6969 TECHNICAL DATA Circular saw: - Max saw blade diameter: 300mm - Spindle: 30mm - Max cutting height: 60mm - Saw blade adjustable front/back - Motor: 2.4kW Milling machine: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 190mm - Lockable spindle Bodpfx Aozc Iv Doigowr - Max cutter diameter: 360mm - Motor: 7.5kW - 2 spindle speed options - Material hold-down - Adjustable side carriage (up/down, front/back) - Angle stop - Pull-out table support - Manual carriage feed - Extraction port diameters: 80mm, 160mm - Dimensions (L/W/H): 1910x1960x1800mm, Weight: 830kg – Polish production – DTR (Technical Documentation) included – Upper control panel – Used tenoning machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated according to 4.2 PLN/EUR conversion rate (In the event of substantial exchange rate fluctuations, the price may be subject to change)

Condition: good (used), Year of construction: 1985, functionality: fully functional, total height: 2,480 mm, total length: 2,300 mm, total width: 2,400 mm, overall weight: 4,750 kg, spindle speed (max.): 6,000 rpm, Sale from Bremen location. Manufacturer: Mazak with chip conveyor and accessories Type: VQC-15/40 Year of manufacture: 1985 Technical data: Bwodpezq Hwnsfx Aigor X-axis travel: 560mm Y-axis travel: 410mm Z-axis travel: 380mm Control system: Mazatrol CAM M-2 Table length: 900mm Table width: 410mm Workpiece weight: 300kg Tool changer: 30 Spindle taper: CAT 40 Max. spindle speed: 6000rpm Spindle motor power: 7.5KW Length x Width x Height: 2300.0 x 2400.0 x 2480.0 Weight: 4750 Kg

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X,Y,Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. Bwedpfx Aijvupr Tsgsr CNC milling plotter CORMAK C2040 is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass, dibond and metals. The plotter is mainly intended for use in the furniture and modeling industries. Dissecting table with four independent vacuum sections with dimensions of 2100x4000 mm. Design Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. The work table is made using hybrid technology, It has T-slots enabling manual clamping of material with dimensions of 2100 x 4000mm, Drive SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor Linear bearings: trapezoidal rails, Hiwin carriages Spindle High-quality brushless spindle that is characterized by durability. Additionally equipped with an innovative AIR / not liquid cooling system! The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Software OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing Digital Signal Processing The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Work area 2100x4000mm Maximum spindle height 350mm Control DSP Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Power supply 400V Libra 1580 kg Machine dimensions 2270x4570x2200mm Table height 715mm Guides linear Vacuum Pump 7.5kW or 5.5kW (optional) Drivetrain toothed rack (Z axis - ball screw) Axle drives hybrid servo drives

Condition: excellent (used), Catalog number 7734 Bodpfxszmgnrj Aigswr TECHNICAL DATA - Roller width: 630mm - Max. thickness of the workpiece: 230mm - 4-knife planing roller * Top: - Pawls - Toothed feed roller - Pressure roller - Planing roller - Pressure roller - 2 smooth feed rollers * Bottom: - Adjustable roller in the lower table - Motor approx. 7.5kW - Stepless feed speed adjustment - Diameter of the dust extraction nozzle: 145mm - Dimensions (L/W/H): 1250x1300x1300mm - Weight: 908kg ADVANTAGES - Made in Italy - Very good condition - Used thickness planer Net price: 19,900 PLN Net price: 4,738 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7695 TECHNICAL DATA - shaft width: 640mm - number of knives: 4 - max thickness of processed workpiece: 200mm *from above: - pawls - feed roller, toothed, sequential (split, segmented) - pressure rollers Bwedpezmgmzsfx Aigjr - planing shaft - pressure rollers - outfeed roller, smooth *from below: - slip roller, smooth, at entry - feed roller, smooth, at exit - adjustable rollers in the lower table - electric table elevation - main motor: 7.5kW - stepless feed speed adjustment: 8-24m/min - extraction port diameter: 180mm - dimensions (L/W/H): 1400x1100x1650mm - weight: 1650kg Net price: 17,900 PLN Net price: 4,260 EUR (based on 4.2 EUR rate) (Prices may change with greater fluctuations)