Used Direct Key Module for sale (13,625)

Condition: used, mileage: 2,42,466 km, power: 120 kW (163.15 HP), first registration: 05/2015, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front under the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, battery 100 Ah, additional battery (reinforced), 1-pole battery disconnect switch, turn signals at the front on the side, roof control unit with reading light on driver/passenger side, entry lights, additional main key, folding cover for storage compartment, configurable special module, spare wheel with Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps at the front, seats in the cab: passenger seat comfort, seats in the cab: driver's seat comfort, reinforced rear stabilizer, reinforced front stabilizer, fuel gauge for auxiliary heater, separating relay with additional battery, rear wall lining, thermal insulation of the driver's cab, heat-protective glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag on the driver side, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both sides, brake assistant, braking system with ABS+ASR, headliner in the cab, lockable glove compartment, body/superstructure: standard platform, fuel tank: main tank 75 liters, headlight range adjustment, truck approval, engine 2.1 liters - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to Euro 5 emission standard, safety belt system with warning system (driver side), seat cover/upholstery: fabric Lima, maintenance interval indicator Assyst, permissible total weight 5.00 t, dual tires on 2nd axle / rear axle * 1st owner * Rear axle with air suspension * Ambulance and rescue vehicle with box body * Superstructure from WAS * Adjustable floating table * Stretcher frame * Light carrying chair * Central locking for patient compartment * KONVEKTA air conditioning * 1 attendant seat * Refrigerator compartment * Warming cabinet * Sink * Medicine cabinets * Oxygen and suction system pre-installed * 12 + 230 Volt sockets * Skylight * External storage compartments * Rear wing doors with step * Side door with sliding window and step * All-round work lights * Partition with sliding window * Ambient lighting left, right and rear * 2x interior lighting, bright white and blue * Cab with 2 seats * 2x air conditioning at the front and rear * Automatic transmission * Telma retarder * Electric windows * electrically adjustable and heated mirrors * Searchlight * Daytime running lights Hedjz A Ncbspfx Ab Ijnt * Driver and passenger airbags * ABS and ASR * Dual-tired rear axle * Extra pneumatically extendable step at the rear * Superstructure dimensions: L=3.650 x W=1.900 x H=1.980 mm * Wheelbase: 3.650 mm * Permissible total weight: 5,000 kg * Unladen weight: 4,415 kg Proper all-season tires from Conti, DOT 2024, at the front with approximately 6.0 mm and at the rear with approximately 4.0 mm tread depth Engine, automatic transmission, and rear axle are dry The engine runs smoothly, and the automatic transmission shifts cleanly Starter battery is new +++ Errors, changes and prior sale reserved

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 221/2-306, functionality: fully functional, operating hours: 207 h, type of input current: three-phase, travel distance X-axis: 3,200 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 70 mm, workpiece length (max.): 1,000 mm, number of axes: 3, number of slots in tool magazine: 4, total height: 2,500 mm, total length: 1,500 mm, total width: 2,500 mm, overall weight: 3,000 kg, Equipment: CE marking, documentation/manual, HOLZ-HER EVOLUTION 7402 4MAT – Vertical CNC Machining Center Year of manufacture: 2023 Operating hours: 207 h Availability: Immediately High-performance industrial vertical CNC machining center suitable for milling furniture carcasses and other components from wood and laminated panels. Key Features - Vertical machining with highly accurate vacuum positioning system (including complimentary vacuum pads) - Rear clamping for processing all edges of the workpiece, enabling complete machining without repositioning - Laser length measurement system - Air-conditioned control cabinet - Uninterruptible power supply for computer unit Technical Specifications - Working length: 200–3200 mm - Working height (Y): 70–920 mm - Panel thickness: 8–70 mm - Maximum speed: - Vector: 68 m/min - Per axis: X 25 – Y 60 – Z 20 m/min Machining Unit - 10.3 kW electrospindle (air-cooled) - HSK-F63 tool holder - 4-position tool magazine - XL boring unit – 19 drilling spindles (13 vertical, 6 horizontal) Hsdpfxsy Eygnj Ab Isnt - Groove saw in Y-direction Software and Control - Complete CAMPUS V7 EVOLUTION CAD/CAM software - Included modules: NC-HOPS, aCADemy, MT-Manager, Workcenter, Scenes - Integrated 3D simulation - Intuitive programming and advanced machining management - Remote control console - USB port - Wifi Equipment - ECO vacuum system (8 m³/h)

Condition: used, mileage: 100 km, power: 110 kW (149.56 HP), color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, - To ensure you receive the best possible advice, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you, Tel: Henschel three-way tipper Hnsdpfx Abozr Twqj Ijt Dimensions approx. 2,700 x 2,020 mm BA3 Active Brake Assist, BH1 HOLD function, C6L Multifunction steering wheel, C71 Underrun protection (EC), CL1 Steering wheel adjustable in inclination and height, DK1 Special vehicle for municipal services, E07 Hill start assist, E1D Digital radio (DAB), E1U USB socket 5 V, E2I Additional battery for retrofitted equipment, interior, E30 Single-pole battery main switch, E36 Separating relay for additional battery, E43 Trailer socket 13-pin, E5M PSM standard contact extension, E7B Navigation pre-installation, E7M MBUX multimedia system, ED4 Fleece battery 12 V 92 Ah, ED5 Parameterizable special module, EE5 Ultracap, automatic transmission interlock, EK1 Terminal block for electrical connection, ES0 Jump start contact, ES5 Charging package for instrument panel, EW6 Pre-installation for Remote Services Plus, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F2W Winter package, F35 Rear window, F49 Heated windshield, F61 Interior mirror, F68 Heated and electrically adjustable exterior mirrors, FF0 Clothes hook in passenger compartment, FF5 Storage compartment above windshield, FG8 Cup holders in the front, FJ4 Storage compartment under cockpit, FM3 WET WIPER SYSTEM, FQ6 Lockable compartment in storage above windshield, FR7 ELECTRICAL PRE-INSTALLATION FOR REVERSING ASSISTANCE, FS1 Mirror holder, extended, FZ9 Two additional main keys, G43 9G-TRONIC, H00 Warm air duct to passenger compartment, H12 Auxiliary hot water heater, H15 Seat heating for front passenger, H16 Seat heating for driver, H21 Heat-reflecting glass with band filter on windshield, HH9 SEMI-AUTOMATICALLY CONTROLLED TEMPMATIC CLIMATE CONTROL SYSTEM, IF4 Chassis with double cab, IL5 Left-hand drive, IR4 Wheelbase 3665 mm, IT5 5.0-tonne, J10 Speedometer km/h, J1A Seatbelt warning system for rear seats, J1V Pre-installation for blind spot assist by body manufacturer, J55 Seatbelt warning system for front passenger seat, J58 Seatbelt warning system for driver's seat, J65 Outside temperature display, J92 Deletion of tachograph, JA8 Crosswind assist, JB4 Active lane keeping assist, JF1 Rain sensor, JF7 Start-off information assist, JH3 Communication module (LTE) for digital services, JI7 Start-up mileage maintenance interval 60,000 km, JK5 Combination instrument with color display, JS2 Intelligent speed assist, JT7 Turning assistant, JV7 Pre-installation for tone sequence system, JW0 Rear warning system, JW8 ATTENTION ASSIST, KB7 Main tank 93 liters, L LEFT-HAND DRIVE, L07 Outline lamps, L22 Rear lights in partial LED technology, L72 Electrical system for external superstructure, L76 Rear lamp wiring harness extended, L94 Deletion of parking lights, LA2 Driving light assistant, LB1 Lateral marker lights, LB9 Courtesy lights, LC4 Comfort roof control unit, LE1 Adaptive brake light, LG7 LED High Performance headlights, LV1 Pre-installation for all-round beacon, LX5 Europe, MD4 Speed limitation 90 km/h EC, MJ8 ECO Start-Stop function, MP6 Engine version Euro VI, MR0 Emission class E (for heavy commercial vehicles), MS1 Cruise control, MU3 OM 654 DE 20 LA 110 kW (150 hp) 3800/min, P47 Mud flaps in the front, P57 Pre-installation for three-way tipper, Q10 Cross member for trailer coupling, Q11 Longitudinal member reinforcement, Q18 Rear cross member bolted, QA3 Vehi

Condition: used, Year of construction: 2013, functionality: fully functional, spindle bore: 105 mm, turning diameter: 800 mm, turning length: 3,000 mm, quill stroke: 240 mm, quill diameter: 100 mm, spindle speed (max.): 720 rpm, spindle speed (min.): 7 rpm, bed width: 600 mm, overall weight: 5,500 kg, rapid traverse X-axis: 4 m/min, rapid traverse Z-axis: 2 m/min, workpiece weight (max.): 2,000 kg, IMTI SDM 800/3000 – USED HEAVY-DUTY LATHE An IMTI SDM 800/3000, manufactured in 2013, from a company liquidation. Originally an exhibition/demonstration machine in our showroom, sold to the previous owner in 2016. Inspection on-site or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, center distance 3,000 mm - Multifix quick-change tool holder with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm - 3-axis digital display SINO SDS6-3V TECHNICAL DATA - Swing over bed: 800 mm - Swing over cross slide: 1,000 mm - Swing over carriage: 480 mm - Center distance: 3,000 mm - Bed width: 600 mm - Spindle bore: 105 mm, spindle nose DIN 55027 size 11 - Spindle taper: Ø 120 mm, taper 1:20 - Spindle speeds: 7-720 rpm - Thread cutting: metric 1-240 mm (52 steps), inch 1-14 (26 steps), module 0.5-120 mm (53 steps) - Longitudinal feed 0.1-24.3 mm/rev, cross feed 0.05-12.5 mm/rev - Rapid traverse longitudinal/cross: 4,000 / 2,000 mm/min - Tool toolbit cross-section: 50 x 50 mm - Cross slide travel: 420 mm, top slide: 200 mm - Tailstock quill Ø 100 mm, taper MK 6, stroke 240 mm - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Main motor: 11 kW, rapid traverse motor: 1.1 kW - Workpiece weight between centers: max. 2 t, in chuck: max. 500 kg - Total weight: approx. 5,500 kg STANDARD EQUIPMENT Hedozi Dhbepfx Ab Isnt - Multifix quick-change tool holder size D1 with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm incl. chuck flanges 350/500 mm - 3-axis digital display SINO SDS6-3V - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Complete coolant system - Fixed center, drive plate, change gears - Electrical end stop longitudinal, halogen machine lamp - German and English technical documentation incl. CE declaration of conformity - 400 V, 50 Hz, 3-phase CONDITION Used machine, manufactured in 2013, from a company liquidation. Sold “as is”, no warranty. Inspection on-site or via video call is highly recommended. OUR SERVICE Online or on-site factory visit, transport organized upon request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact for spare parts and support, member of the FDM, the trade association for wholesale trade in machines and tools. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: good (used), Year of construction: 2017, Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current power supply, power supply module, power supply module -Manufacturer: Lenze, L-force Power Supply Module power supply module -Type: E94APNE1004 Hnodpfxsxm S I Re Ab Ijt -Dimensions: 510/210/H290 mm -Weight: 13.6 kg

Condition: used, Year of construction: 1994, machine/vehicle number: GA24, Used ROBINO & GALANDRINO Wirehooder record 10-2Technical Specifications & Performance DataThis Automatic Wirehooder is a compact, high-performance wirehood applicator designed for sparkling wine and premium beverage closures. Built for reliable operation on glass bottles, it delivers precise wirehood positioning and twisting for consistent, secure muselet application at industrial speeds.Machine type: Automatic Wirehooder (wirehood/muselet applicator)Model: Record 10/2Year of manufacture: 1994Refurbishment: Overhauled in 2017Production speed: 10,000 bphContainer material: Glass bottlesInfeed direction: ClockwiseWirehood magazine: High-capacity, long-autonomy designSupported wirehood styles: Collio, Collio light, Collina, Lia, Sile, Extra L, Valdobbiadene, Elegance, Artù, Piave, Monterossa, Cru, Magnum CollioAdvanced Automation & Control SystemsEngineered for stable, repeatable operation, this wirehooder features automated feeding and consistent torque application to protect cork integrity while ensuring firm cage tightening. The long-autonomy magazine reduces manual replenishment for improved uptime on a used bottling line or integrated second hand packaging cell. Operator-friendly controls support quick setup and process monitoring for efficient beverage production.Automated wirehood feeding with alignment and controlled twist applicationHigh-capacity magazine to extend runtime between reloadsOperator controls for speed and format parametersStandard safety interlocks and emergency stop circuitsProduction Line Integration CapabilitiesThis wirehooder integrates seamlessly downstream of a corking machine on glass bottling lines. It can function as a standalone module or as part of a synchronized industrial packaging line with upstream and downstream conveyors, accumulation, and inspection systems.Inline or standalone operation with conveyor interfacesDesigned for glass bottle handling in sparkling applicationsFormat changeover kits support various wirehood styles listed aboveSuitable for integration into complete bottling and beverage production linesMachine Condition & Maintenance HistoryThe unit was manufactured in 1994 and underwent a refurbishment in 2017, providing renewed reliability of key components and alignment systems. It is presented in good working order and ready for operation, ideal for facilities seeking robust second hand bottling equipment with proven performance.Operational Performance & VersatilityOptimized for sparkling closures, the machine handles a broad range of wirehood designs without compromising on application quality. Its high-speed performance supports commercial throughputs, while the magazine capacity helps maintain continuous operation and minimize changeover interruptions.Consistent cage placement and twist control for secure closureWide compatibility with premium wirehood styles for different brand aestheti... Hsdpfx Aezmpzueb Ijnt

Condition: good (used), Year of construction: 2009, operating hours: 41,994 h, functionality: fully functional, GLEASON-PFAUTER P 1600/2000 – Internal and external gear cutting – Ø 2,000 mm – 2009 Machine data Field | Information Manufacturer | GLEASON-PFAUTER Type | P 1600/2000 Year of manufacture | 2009 Machine type | CNC gear hobbing machine / gear cutting machine Machining process | Internal and external gear cutting Workpiece nominal diameter | 1,600 mm Max. workpiece diameter | 2,000 mm Nominal module | 20 / 30 mm Module, special version | 25 / 35 mm Tool head swivel range | +30° / −45° Tool diameter max. | 350 mm Tool length max. | 375 mm Tool speed | 20–200 min⁻¹ Further speed ranges according to manufacturer | 26–265 / 36–360 min⁻¹ Tool head drive power | 35 kW Special version according to manufacturer | 52 kW Hnjdpfx Aboz Au Rtj Iot Distance between workpiece and tool axes | 100–1,000 mm Special version | 100–1,200 mm Axial slide travel, standard | 700 mm Lowest tool head position above table | 450 mm Table diameter | 1,460 mm Table bore Ø | 500 mm Table bore depth | 875 mm Table speed max. | 8 min⁻¹ Table load max. | 20,000 kg Machine width | approx. 6,900 mm Machine length | approx. 8,400 mm Machine height | approx. 4,700 mm Machine weight | approx. 33,000 kg Electrical data for the specific machine Field | Value Operating voltage | 400 V Frequency | 50 Hz Connected power | 100 kVA Rated current | 155 A Fuse rating | 160 A Control voltage | 24 V Description for machine search GLEASON-PFAUTER P 1600/2000 CNC gear cutting machine, year of manufacture 2009 Heavy-duty vertical CNC gear cutting machine for machining large gear components. The machine is equipped for machining both external and internal gears and features a very large working area up to Ø 2,000 mm. The massive workpiece table has a diameter of 1,460 mm and is designed for workpiece weights up to 20,000 kg. The tool head can be swiveled from +30° to −45°. Maximum tool diameter 350 mm, maximum tool length 375 mm. Of particular interest is the existing configuration for internal gear cutting, which distinguishes the machine significantly from a classic external gear cutting machine. The machine is particularly suitable for the production of large: Gears, internal gear rings, bevel gears, large gearbox components, industrial gearboxes, wind turbine gearboxes, planetary gearboxes, and heavy-duty drive components. Technical key data: Workpiece diameter up to 2,000 mm, module up to 25/35 mm according to manufacturer's specifications, table Ø 1,460 mm, table load 20 t, machine weight approx. 33 t. Technical data according to available manufacturer documentation and nameplate. Subject to prior sale and errors.

Condition: used, This listing is for 1 of 18 Qiagen BGR-Z-Modul Dt-1100uL Bez Handler with grippers. Each boxed in original packaging These units is in full working condition and ready for immediate use Hnedpfx Aoxv Dnheb Ijt The Qiagen BGR-Z-modul Dt-1100uL Bez Handler with Grippers (Part No. 9015210) is a component designed for use with Qiagen's automated liquid handling systems, such as the BioRobot 8000. This module facilitates precise and efficient handling of 1,100 µL volumes, equipped with grippers to manage sample tubes or plates, enhancing the automation of laboratory workflows. Key Features: Volume Capacity: Designed to handle 1,100 µL volumes, suitable for various liquid handling tasks. Gripper Mechanism: Equipped with grippers to securely handle sample tubes or plates, ensuring accurate placement and retrieval. Compatibility: Specifically designed for integration with Qiagen's automated systems, ensuring seamless operation and reliability.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 80 mm, We offer this very good Morbidelli Uniflex HP Throughfeed Borer and Router CNC, year of construction 2016. Manufacturer: Morbidelli Model: Uniflex HP Year of manufacture: 2016 Condition: very good Category ID: 2074 Type ID: 151 Machine type: Throughfeed Borer and Router CNC The Morbidelli UNIFLEX HP is a high-performance CNC drilling and routing centre designed for precision panel processing in furniture and cabinet manufacturing. It allows drilling on multiple faces of a panel and routing operations with high accuracy while minimizing setup time through automated clamping and CNC control. Key Features • 6-side panel drilling capability with upper and lower machining heads • Up to 134 independent spindles for high production throughput • RO.AX rotoaxial spindle technology ensuring zero backlash and extremely accurate drilling • Dual independent clamps eliminate machine setup time and allow simultaneous operations • Ability to process two overlapped panels simultaneously • Integrated saw blade in X-axis for panel cutting operations • Heavy-duty welded O-frame structure for maximum rigidity and precision • CNC controlled panel movement with brushless motors and ball screws • Xylog Plus 2 CNC software with PC interface Drilling System • 96 vertical drilling spindles (48 upper + 48 lower) • Horizontal drilling spindles: o 8 + 8 in X direction o 4 + 2 in Y direction • Maximum spindle speed: 6,000 rpm • Integrated X-axis saw blade: o Diameter: 125 mm o Speed: 7,500 rpm CNC Control & Software • Industrial PC with Windows operating system • 17" colour display and keyboard interface • Xylog Plus 2 programming software • Programming options: Parametric programming • DXF and ASCII file import support • Simulation and optimisation of drilling cycles Panel Capacity • Panel length: 250 – 3000 mm • Panel width: 70 – 1300 mm • Panel thickness: 10 – 80 mm • Maximum panel weight: 100 kg Axis Speeds • X axis: 120 m/min • Y axis: 35 m/min • Z axis: 30 m/min Hnedpfx Absyr Uguj Iot Machine Requirements • Compressed air: 6.5 bar • Average air consumption: 500 Nl/min • Dust extraction airflow: o Upper head: 5000 m³/h o Lower head: 2250 m³/h Additional Equipment Included • Panel length measuring device • Electrical cabinet with air conditioning • Manual loading and unloading stations with cross belts If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, mileage: 20,900 km, power: 60 kW (81.58 HP), first registration: 09/2020, fuel type: electric, next inspection (TÜV): 09/2026, color: black, gearing type: automatic, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, second-hand vehicle warranty, 1st hand, 12-month warranty, single-speed gearbox * 12-volt socket * 38.1 cm (15") steel wheels with hubcaps * 4.6 kW onboard charger * 5AL electric motor * ABS (anti-lock braking system) Hnodpfxoy Hm N Se Ab Iet * Airbags * Active brake assist * Acoustic environment protection * Antenna integrated in fender * Exterior mirrors manual * Exterior mirrors with aspherical convex glass * Exterior mirror caps textured (black) * Outside temperature display with frost warning * BATTERY 017KWH * BATTERY INDEX 1000 * BATTERY TYPE BT6BE1 * WATER-COOLED BATTERY * Model series 453 * Owner's manual and service book – German * Front passenger seat with through-loading function * Hill start assist * Brake assist * Glasses compartment for driver and front passenger * COC paper EU6 – with registration certificate part II * Cool & Audio package * Crash sensor for hazard light activation * German specification * Three-point seat belts * Third brake light * Drive lock – automatic door locking when driving * Simple electric window opener without comfort function or anti-pinch protection * Electric power steering * Electric specification (for body shell) * ELECTRO-DRIVE * Electronic architecture T4VS * ESP® – Electronic Stability Program * Driver's airbag * Direction indicators with comfort tip function * Vehicles with 4x2 drive * Pedestrian impact protection front and side * All-season tires * Privacy glass (dark tinted) * Seat belt warning function * H4 halogen headlights * Open glove compartment * Rear window * Rear window wiper with interval function * Rear spoiler * Heating element for electric vehicles * Displacement 2275cc (dummy for e-motor) * i-Size child seat anchorage * Interior lighting * Instrument panel without insulation * Instrument panel black textured, door center panels in black fabric, accent parts in black * Interior storage without color * REFRIGERANT R1234YF * Automatic climate control * Kneebag * Instrument cluster with monochrome display * Comfort windscreen wipers with interval function * Communication module (2G/3G) * Plastic steering wheel * Radiator grille in body panel color * Charging cable for wallbox and public charging stations * Charging cable bag * LED daytime running lights * 3-spoke steering wheel design * Steering wheel without height adjustment * Headlamp range adjustment * MB-Mobilo with DSB and GGD * Mercedes-Benz / smart brand * Center console with roller cover * Zero emission for electric drive * Black fabric upholstery * Fabric upholstery * Tire pressure monitoring system (TPMS) * Leather gearshift knob * Crosswind assist * Side indicator lights * Service cover * Seat belt without height adjustment * Sidebags * Seat type 1 * Seat heating * smart audio system * smart road assistance * Sun visor with parking ticket holder * 15-inch steel wheels * Standard production vehicle * Remote key system frequency 433 MHZ * Odometer in kilometers * Cruise control * tridion safety cell * Door handles textured (black) * Interior door openers textured (black) * TRANSITION OF WORLD MANUFACTURER TO MERCEDES-BENZ AG * Full roof with black fabric covering * Windowbag * Central locking * Auxiliary instrument with battery charge and power display * Additional equipment for countries with mild temperatures

Condition: good (used), Year of construction: 2020, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, overall weight: 4,500 kg, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, safety light barrier, HYDRA is a high-speed, two-head digital quilting machine, equipped with a fully automatic double-feed system, designed for the furniture, mattress, and home textile industries. It performs all operations: feeding via motorized rollers, quilting, and cutting of the duvet or padding to the desired length. The double-feed system allows quilting of two rolls simultaneously, while also offering motorized width adjustment for single-feed mode, with a changeover time of just 20 seconds. This double-feed system is ideal for large-scale production of sofas and headboards, doubling the manufacturing capacity through the simultaneous quilting of two rolls. Conversely, switching to single-feed mode allows for the quilting of high-end mattresses and large-format home textile items. No rework machine required: the ability to resume stitching at the exact stopping point or at the desired point. Automatic parking in case of upper or lower thread breakage. Automatic measurement of the maximum physical stitching area for cross-verification with the active pattern. Easy adaptation of quilting patterns. Motorized adjustment of the width of the side and center roller clamps. Your sofas, mattresses, headboards, and duvets will stand out for the quality of their stitches, their patterns, their durability, and your increased efficiency. Key features: High-quality Dürkopp Adler sewing head with spare parts available worldwide. Upper and lower thread trimming in 0.5 seconds. Simultaneous quilting of two different rolls for increased productivity. Single-roll feed mode available, with switching between single and double modes in seconds. Statistical production graphics: stitch length, pattern name, customer name, stitching time, number of stitches, etc. ElektroteksCare: online after-sales service. Hnodezx Sw Aopfx Ab Iet Advanced side cutters. Easy troubleshooting through error code display. Adjustable material tension in both directions. Reliable Omron control system offering maximum efficiency. Ergonomic feeding system for multiple rolls. High-durability pneumatic system with low air consumption.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). Hnedozw Apgopfx Ab Ijt The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: used, Year of construction: 2018, Overview This Krones Linatronic M is an empty bottle inspector for glass bottles, built in 2018. It inspects every empty container before filling and rejects any container that fails one of the inspection stages. The machine combines camera-based base, sealing surface, screw thread and sidewall inspection with high-frequency and infrared residual liquid and caustic detection. Two sidewall modules with four mirror assemblies and four cameras provide a compact full-front view of the container, and the DualFlash neck finish lighting inspects the outer and inner sealing surface separately using two minimally offset lighting angles. Foreign containers are identified at the machine infeed by height, contour and colour detection. Three Ecopush rejection points separate foreign, dirty and damaged containers. The machine is operated from a Krones iPanel CD terminal. Technical data - Manufacturer: Krones - Model: Linatronic M - Machine type: empty bottle inspector - Year of manufacture: 2018 - Application: inspection of empty bottles prior to filling; neck ring detection for returnable PET containers included - Inspection modules: base inspection, sealing surface inspection, screw thread inspection (cone optics), sidewall inspection - Sidewall inspection: 2 modules with 4 mirror assemblies and 4 cameras, two views per camera at 45° - Residual liquid and caustic detection: high frequency and infrared - Additional detection: polarising transparent films at container base and sidewall, glass fragments at the container base, scuffing via sidewall camera - Foreign bottle detection at the infeed: container height, contour and colour via camera - Rejection: 3 x Ecopush - foreign containers at the infeed, dirty containers and damaged containers at the discharge - Control: Krones iPanel CD operator terminal, prepared for data connection to a single-station PC (Datalyser) - Test bottle programme with 2D code - Conveyor height: 1,200 mm, adjustment range 1,155 - 1,315 mm - Minimum required room height: 2,810 mm - Overall dimensions: approx. 6,700 x 1,300 x H 2,800 mm - Direction of operation: right-left machine - Power supply: 400 / 230 V, 3/N/PE, 50 Hz, 6 A full load current, 20 A pre-fuse; auxiliary supply 230 V, 1/N/PE, 5 A - Standards: IEC 61439-1 / IEC 60204-1, CE marked - Machine base and housing: stainless steel (AISI 304 equivalent), clean design Equipment - DualFlash neck finish lighting, separate inspection of outer and inner sealing surface - Combined thread inspection via the sidewall mirror assembly - Fallen container detection in front of the machine (photoelectric sensors with infeed pusher) - Base blow-off unit with clocked air nozzle for foam and lubricant residues - Container blower at the infeed, conveyor dead plate (3-fold) - Servo-driven collection module for rejected containers at the discharge - Festo pneumatic system with maintenance unit, food-grade lubricants - Emergency mode: passage operation without inspection Hodpfozy Ud Ijx Ab Ijnt - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: IRB0580-02-0066, ABB Robotics IRB 580 robot, serial number IRB0580-02-0066 The ABB Robotics IRB 580 is a compact, high-precision 6-axis painting robot. Equipped with a hollow wrist and a reach of up to 2200 mm, it offers excellent flexibility and reduces maintenance effort, as the hoses are routed internally. It is ideal for automated painting processes in industry. It is typically offered with two horizontal arm lengths: short (1,220 mm) and long (1,620 mm). Further key technical features include: Hnsdpfx Abszm Hdtj Ist Payload: Up to 16 kg Range of motion: The wrist can be rotated 140° in any direction Process monitoring: The integrated system (IPS) monitors wear and automatically switches to open-loop operation in the event of cable or sensor failures to minimize downtime. Used item – normal signs of wear. Further details, article numbers, and images available on request. "Illustrative photos. The actual product may vary." Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the number of items, weight, and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city, and postal code. Freight costs on request – please specify delivery address.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, operating hours: 12,666 h, power: 12 kW (16.32 HP), MACHINING CAPACITIES: - X-axis (U) vertical milling travel: 3875 mm, 3170 mm between stops - Y-axis (V) milling travel: 1390 mm between stops, for drilling: 1201 mm - Z-axis (W) milling travel: 290 mm Maximum workpiece height (thickness), effective travel: 110 mm For further details, see aggregate travel schematic - Maximum traverse speeds: X-axis (U): 60 m/min Y-axis (V): 50 m/min Z-axis (W): 20 m/min MACHINE CONFIGURATION: - Worktable with 6 mobile support beams, equipped with several vacuum pods and pneumatic clamps 2 pneumatic connections per beam for clamps, usable capacity ranging from 44 to 78 mm 6 rear stops 6 intermediate stops 3 right lateral stops 3 left lateral stops 4 lifting blades (for loading/unloading assistance) Table divided into 2 working zones - Becker VTLF vacuum pump 250 m3/h, 5.5 kW with air filter - Pfannenberg cooling unit 1.7 kW - Chip conveyor belt - X-axis movement by rack and pinion, Y & Z axes by ball screw and bearing block (high-precision linear guides with automatic lubrication) - Aggregates on swan-neck, composed as follows: • 12 kW HSD milling/routing unit - Toolholder type: HSK 63 F - Variable spindle speed 6000 - 24000 rpm - Inverter-controlled - Surround extraction hood - Onboard tool magazine with 10 stations + additional 12-station magazine • 11-spindle drilling unit, 1.7 kW - Center distance between spindles: 32 mm - Spindle speed: 4000 rpm - 11 vertical spindles (8 along X, 3 along Y) - 2+2 horizontal spindles on X - 1+1 horizontal spindles on Y • Control panel - Windows PC - Network card and Ethernet connection - Software: Masterworks and user manual - DXF conversion and direct execution of ISO, TLF, DXF - Pre-programmable zones - Remote control OTHER FEATURES: - Overall electrical supply: 400V, 3Phases+N+E, 50Hz Nominal current: 58.6A, 46.6 KVA - Pneumatic supply: 7/8 Bar - Average consumption: 100Nl/min - Extraction Lower port Ø120 mm, upper port Ø250 mm Recommended flow rate: 6500 m3/h at 20 m/s Hnedpfsy Nb Tkjx Ab Iet - CE certified, safety zones and protective grille Lockable isolator, emergency stops Operating footprint: see schematic Transport dimensions: to be specified during equipment preparation Estimated total weight: 2400+350+350 kg Please contact us for supply of consumables, accessories and/or extraction systems. Original documentation, manual, spare parts list, electrical and pneumatic diagrams, service keys, software and license keys included.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, total length: 3,200 mm, For sale: a new CIDAN RAPIDO 32 electric guillotine from our showroom. The machine has not been used in production and is connected and fully ready for operation. It can be viewed in person, tested, and trial cuts can be performed. The machine is in stock – fast delivery is possible. The CIDAN RAPIDO is a fast and reliable electric guillotine designed for precise sheet metal cutting. The machine can perform up to 35 cuts per minute, making it ideal for both individual jobs and intensive series production. The drive system with eccentrics, the material clamping system, and the sheet support elements mounted close to the blades allow for convenient and precise cutting, even of narrow strips. The guillotine has angular supports on both sides of the front table, ensuring accurate sheet feeding at a 90° angle. LED lighting in the cutting area allows the operator to clearly see the cutting line. Key information: Manufacturer: CIDAN Machinery Model: RAPIDO 32 Condition: New / showroom machine Working length: 3200 mm Max. steel thickness: 2.5 mm Max. stainless steel thickness: 1.6 mm Max. aluminum thickness: 3.7 mm Cutting speed: up to 35 cuts/min. Weight: approx. 2100 kg CUTLINK control and automatic back gauge The guillotine is equipped with the CIDAN CUTLINK control system – a fast and easy-to-use program that allows up to 10 different operations to be programmed simultaneously. After the operator enters the required dimensions, the 750 mm automatic back gauge automatically adjusts to the required position, allowing for quick and accurate cutting of different widths. Sheet support and return The pneumatically controlled sheet support system allows for control of the material during cutting. After cutting, the cut sheet is directed to the front material trolley, so the operator does not need to collect parts behind the machine. The trolley can be easily removed and transported, and also picked up with a forklift. Additional equipment included with this machine: Telescopic extension of the front table up to 800 mm from the cutting line – for easier positioning and support of large sheets. Material trolley – for collecting cut sheets and convenient transport to bending or other machines. LED cutting area lighting. Automatic 750 mm back gauge. CUTLINK control system. Ideally suited for sheet metal processing, roofing and facade manufacturing, ventilation, and other sheet metal processing companies. The machine is located in our showroom, connected, and ready for demonstration. Fast delivery is possible. Hnedpfx Abozz Rqte Iet If you have any further questions, please do not hesitate to ask.

Year of construction: 2016, condition: used, Equipment: 1) Cartes GE362VR finishing machine, infeed unit: servo-driven pneumatic 76mm clamping mandrel/expansion shaft, accommodates rolls up to 800mm in diameter or 150kg, automatic electronic web tension and roll diameter control with photocell, automatic stop function at end of material, electronic web guide with ultrasonic sensor for precise web control, splicing table with pneumatic clamps, adhesive tape dispenser, photocell for detecting print marks and any contrast points on pre-printed material, complete servo motor control of the material web, Vetaphone corona treatment system, flexo coating unit, fully rotary operation, equipped with laminating module, rotary flexo coating unit, UV dryer, specification in the source document: 24W/cm / 160W/cm, for laminating, printing or full-surface overcoating/coating, 2) Semi-rotary die-cutting unit with Image Distortion System (IDS) and Air Gap System (AGS): die-cutting system, magnetic cylinder, air-gap adjustment system, semi-rotary and fully rotary gearless die-cutting system, printing plate/die plate thickness range: 0.2-2mm, Image Distortion System (IDS), 3) Air Gap System (AGS), 4) outfeed unit, web control, complete servo motor control of the material web, slitting unit, 10 pivoting razor blades with lateral adjustment, additionally 8 knife/counter-knife cutting groups for longitudinal slitting, rewinding shafts, first rewinding shaft, independent servo-driven pneumatic 76mm expansion shaft, for rolls up to 800mm or 150kg, automatic web tension control, direction of rotation: clockwise/counterclockwise, with documentation. An on-site inspection is possible. Hedpfx Abozy Rv Te Isnt

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Weiler Praktikant 140 B Lead and Feed Screw Lathe with Toolroom Accuracy featuring NEW K&C 3-Axis Digital Readout! Technical Data: - Year of construction: 1989 Machine No.: 89-140-1471 - Centre height: 140 mm - Centre distance: 650 mm - Spindle speeds: from 24 to 2500 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock MK 3 Hsdpfeymdymjx Ab Isnt - Feeds: from 0.02 to 0.63 mm/rev - Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible - Metric thread pitches: from 0.25 to 8 mm - Weight: approx. 680 kg - Spindle brake, selectable - Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: - NEW K&C 3-axis digital readout, 12 months manufacturer warranty and operating manual Functions: switch mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool library for 200 tools, taper calculation, radius/diameter indication, quick zeroing, count direction switching - NEW collet system with collets from 3 to 25 mm, 1 mm increments - Three-jaw chuck, 160 mm, with 1 set of jaws - Multifix size A with 2 tool holders - Face plate - Bed stop - Rear cover - Machine feet - Electronic spindle guard - Operating manual Safety features: Electronic spindle protection, lead and feed screw cover, 2 emergency stops, spindle brake, electronic change gear guard About the machine: For sale is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This well-maintained lathe comes from a training workshop. All slides operate smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-like surface finishes. Take the opportunity to view and test this machine under power on site to verify its condition for yourself.

Condition: used, Year of construction: 2012, functionality: fully functional, Weiler Primus VC Precision Lathe, manufactured in 2012. 3-axis digital display from Siemens with AC drive and stepless speed control. CE certified. Technical specifications: >> Year of manufacture: 2012, Machine No. HB 01 >> Center height: 140 mm >> Distance between centers: 500 mm Hnjdpfxezl T Hxj Ab Iet >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Hand lever tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be activated >> Machine dimensions: approx. 1.4 m x 1.55 m x 0.95 m Accessories and equipment: >> 3-axis digital display from Siemens >> Quick-change tool holder with collets (see pictures) >> Tool cabinet >> 3-jaw chuck, 160 mm, with 7 sets of jaws >> Stop >> Mulifix, size A, with 4 steel holders >> Electric chip guard >> Machine lamp >> Spindle stop, drill chuck, center >> Change gears >> Splash guard About the machine: Offered for sale is a Weiler Primus VC lead screw and draw spindle lathe, manufactured in 2012, in very good condition. The control system, in combination with a precision lathe from Weiler, performs the following functions: graphical display of travel paths and travel direction, graphical representation of the coordinate system on the lathe, compensation of tool corrections, zero point shift to compensate for workpiece position, radius/diameter switching, graphical display of the main spindle direction of rotation, and graphical display of the position of the machine's speed potentiometer. This is a very nice lathe with AC drive and stepless speed control of the spindle. All slides move very easily and smoothly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows for the production of surfaces that are as smooth as ground surfaces. The digital display from Weiler makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on site while it is powered up and to convince yourself of its condition.

Condition: used, Year of construction: 2023, operating hours: 259 h, functionality: fully functional, machine/vehicle number: 1200002, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, Like-new Haas VF-4-EU CNC vertical machining center with only 259 operating hours. The machine is in excellent optical and technical condition. The VF-4 is already fully prepared for 4-/5-axis operation from the factory – the extensive 5th-AXIS package is installed: - Axis cards for the 4th and 5th axes - Dynamic workpiece offset - Tool center point control - High-speed machining - Programmable coolant nozzle - Wireless Renishaw measuring probe and tool probe In addition, the machine is unusually well-equipped: - TSC – internal coolant supply with 21 bar - Spiral chip conveyor - Complete coolant maintenance package (automatic replenishment, oil separator, mist collector) - Fast 30+1 tool changer - Spindle with 10,000 rpm The control system is the current Haas Next Generation Control with touchscreen, WLAN, Ethernet, and HaasConnect remote monitoring. This makes the machine immediately ready for demanding machining tasks. The original transport securing devices are available. An original Haas tool cart for SK40 is also included. Inspection and demonstration under power are possible at any time by appointment. Loading and transport can be arranged. A suitable TRT-210 CNC rotary table is offered in a separate listing and can be included in the package if desired. The LANG base plates are not included in the scope of supply. Technical data: - Travel ranges X / Y / Z: 1,270 × 508 × 635 mm - Spindle nose to table: 107 – 742 mm - Table: 1,321 × 457 mm, 5 T-slots (16 mm), max. table load 1,588 kg - Spindle: 10,000 min⁻¹, BT/CT 40, inline direct drive, liquid-cooled - Drive power: 22.4 kW - Max. torque: 122 Nm at 2,000 min⁻¹ - Rapid traverse X / Y / Z: 25.4 m/min - Feed rate max.: 16.5 m/min - Tool changer: Side SMTC, 30+1 positions - Tool max. diameter / length / weight: 64 mm / 330 mm / 5.4 kg - Tool change time (chip-to-chip): approx. 3.6 s - Connection voltage: 400 V / 50 Hz, 3-phase (internal transformer installed) - Compressed air: approx. 113 l/min at 6.9 bar - Coolant tank: 208 l - Weight: approx. 6,260 kg (with conveyor) Control: - Haas Next Generation Control with touchscreen - 1 GB program memory, Ethernet + WLAN - HaasConnect (remote monitoring), HaasDrop (wireless file transfer) - M130 media display, safe run, synchronized thread drilling - Early detection module for power failure, overvoltage protection - Equipment / options (all installed from the factory) - 5-axis package VF-YT (4th + 5th axis drive-side prepared, DWO/TCPC, high-speed machining, programmable coolant nozzle) - Wireless Renishaw measuring probe system (intuitive) - TSC – internal coolant supply through the spindle, 21 bar - Spiral chip conveyor - Coolant maintenance package (automatic replenishment, oil separator, mist collector) - Additional coolant filter (bag filter 25 µm) Hnsdpsy Tp E Aefx Ab Ist - Filter set for chip sump (200 µ) - Variable coolant flow (M-code controlled) - Blowing of the inside of the machine door - Lifting eyes, touchscreen, door lock

Condition: ready for operation (used), Year of construction: 2024, We offer for sale a modern PAOLETTI Salvacut 3000 automatic cross-cut saw, designed for high-performance and precise cutting of wood materials. This machine represents a powerful and efficient solution for automated cutting operations with high speed, accuracy, and reliability. Key Features & Benefits Manufacturer: Paoletti Energy S.r.l. Model: Salvacut 3000 Year of manufacture: 2024 Automatic cutting system for high productivity Suitable for industrial wood processing and production lines Robust and modern construction Technical Specifications General Voltage: 400 V Frequency: 50 Hz Installed power: 12 kW Saw motor power: 5.5 kW Cutting System Saw blade diameter: 500 mm Bore / thickness: 35 / 4.2 mm Hnedpfxozgr Sce Ab Iot Cutting speed: 2880 rpm Minimum cutting time: approx. 0.3 s Material Capacity Max. cutting section: approx. 70 × 300 mm Max. workpiece length: approx. 5,100 mm Min. workpiece length: approx. 500 mm Min. cross-section: approx. 30 × 15 mm Performance & Feeding Maximum feed speed: up to 200 m/min Material feed direction: right to left (left to right on request) High-speed automatic processing Compressed Air & Extraction Air pressure: approx. 6–8 bar Air consumption: approx. 500 Nl/min Extraction capacity: approx. 5,000 m³/h Extraction speed: approx. 28–30 m/s Extraction connections: Ø120 mm and Ø100 mm Dimensions & Weight Main unit weight: approx. 2,000 kg Max. output sorting unit load: approx. 500 kg Working height: approx. 1,000 mm Operating Conditions Operating temperature: +5 °C to +40 °C Storage temperature: +5 °C to +40 °C Advantages High cutting speed and precision Reliable industrial design Suitable for continuous operation Efficient material processing with stable output quality Additional Information CE certified Modern machine (2024) – very good condition

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Weiler Primus VC precision center lathe, year of manufacture 2008, 3-axis digital display, Siemens, with AC drive, stepless speed control, CE compliant! Technical data: Hedpfxozl T Tre Ab Isnt >> Year of manufacture 2008, machine no. DB-01 >> Center height 140 mm >> Center distance 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Hand lever tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 800 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and equipment: >> 3-axis digital display, Siemens >> Quick-change tool holder with collets (see pictures) >> Tool cabinet >> 3-jaw chuck 160 mm with 5 sets of jaws >> Stop >> Mulifix size A with 4 steel holders >> Electric chip guard >> Machine lamp >> Drill chuck, centering point >> Change gears >> Splash guard About the machine: Offered is a Weiler Primus VC lead screw and draw spindle lathe, year of manufacture 2008, in very good condition. The control system, in combination with a precision center lathe from Weiler, performs the following functions: graphical display of travel paths and direction, graphical representation of the measuring system on the lathe, compensation of tool corrections, zero point adjustment to compensate for the workpiece position, radius/diameter switching, graphical display of the main spindle rotation direction, graphical display of the position of the machine's speed potentiometer. A very nice lathe with AC drive and stepless speed control of the working spindle. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced with a ground finish. The digital display from Weiler makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on-site under power and convince yourself of its condition.

Year of construction: 2023, condition: like new (used), functionality: fully functional, machine/vehicle number: 300062271 / 800305248, Equipment: CE marking, NEW (USED for 1 test) The HABITAT control tower package is ideally suited for HABITAT’s cell culture applications, enabling advanced monitoring and control of bioprocesses. This package features the control unit with comprehensive connection options for gas supply, liquid addition, sensors, and temperature regulation, complemented by a tablet for straightforward and clear operation of the bioreactor. Hjdpfxoy D Rq Uo Ab Iont Process Control & Monitoring: All bioprocess parameters and associated test values can be conveniently managed and monitored via the integrated tablet, which is attached to the control unit. The intuitive, user-friendly software allows selection between batch, fed-batch, and perfusion/continuous operation modes, depending on your cultivation requirements. The new 'Chaotic Mixing' feature enables rapid and effective mixing when needed. The 10.4-inch touchscreen tablet provides direct access to all actuators from the main interface. Key functionalities include clear calibration management, diagram overviews, and comprehensive process documentation. An optional software version compliant with FDA CFR Part 11 requirements is available. Key Features: - Compact, space-saving design: 223 x 402 x 450 mm (WxDxH) - Large 10.4-inch tablet for user-friendly operation - Intuitive software with extensive features - 4 integrated Watson Marlow fast-load pumps - Multiple interfaces: USB, PC, RS232, Ethernet, external signal input, external pump, single-use unit, thermostat - Data storage capabilities The 1L vessel set for the HABITAT research bioreactor includes a 1-liter single-walled glass vessel designed for cell culture applications, alongside a compatible stirring drive. In conjunction with the separately available control tower package (e.g., HABITAT cell), you receive all essential components for successful cultivation.

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 2460039, Technical specifications: # Working area: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 1 rotary axis (A – rotary table with indexing head) - Direct angular measuring system with up to 50 rpm, accuracy +/- 5” # Maximum workpiece clamping dimension/weight: Ø575 x 830 mm / max. 360 kg # Rapid traverse: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Spindle center distance: 300 mm # Spindle speed: 1 – 17,500 rpm # Spindle interface: DIN 69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tools; chip-to-chip average time: 2.5 sec # Maximum tool dimensions: Ø75 mm / length: max. 275 mm / up to 7.5 kg Electrical data: # Mains voltage: 3x400V / 50Hz # Connected load: approx. 85 kVA / 125A Dimensions: # Installation area: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear measuring systems: Heidenhain linear scales # Chip extractor: Knoll Type 550 K-1 Hnedpfxsxxrnbo Ab Ijt # Oil cooling system # Cooling system for shaft, guides, and control cabinet # 2 oil lubrication systems # Oil filtration system (up to 80 bar): Knoll VRF450-2450 (can supply 2 machines simultaneously) # Oil vapor extraction/recovery system: IFS Vario E2000 (2,000 m³/h) # Fire suppression system: Kraft & Bauer # Part detection P/Y: with low-pressure air monitors # In-process measurement: Marposs T25 # Tool breakage detection and length measurement: inductive sensor # Tool presence monitoring in spindle Machine status: NOT OPERATIONAL - Spindle tool and part presence sensors - Tool breakage sensors - Tool magazine piston and slide system door open/close (2 units) - Tool magazine pistons and tool retainer slide system (2 units) - A-axis position encoder - Inductive and magnetic sensors (4 units each) - Chip extraction conveyor requires repair - Chiller for spindle cooling/heat exchanger - Communication module Murr - X axis linear scale - Emulsion chip conveyor level sensor - Hydraulic pump - Motor for hydraulic pump (repairable) - Heat exchanger unit - Electric Siemens contactors for electrical cabinet (3 units) - Safety door lock Euchner - Emulsion filtration unit is shared with another machine (SW BA321 2460038) Note: Machine is NOT WORKING and offered as described.

Condition: used, Year of construction: 2022, machine/vehicle number: LC653, Used Micro can CL10 filling line 4000 Cans per hourTechnical Specifications & Performance DataThis complete automatic canning line is a compact, engineered for efficient beverage production in aluminum cans. Manufactured by Micro Can, it integrates key bottling equipment into a cohesive, space-efficient unit suitable for industrial packaging environments. As a second hand, used bottling line, it offers proven reliability and excellent value for expanding or optimizing production.Line type: Complete automatic canning lineManufacturer: Micro CanMain module: Micro Can CL10 filler/seamerRated output: 4,000 cans per hourContainers: Aluminum cansFormats: Standard 0.33ml and 0.44mlFilling type: gravityAdvanced Automation & Control SystemsThe line is designed for streamlined operation with integrated control and coordinated infeed/outfeed logic between the depalletizer, filler/seamer, and labeling machine. Quick setup and simple recipe changes support efficient format adjustments. Operator-friendly controls, interlocked guards, and emergency stops provide safe, intuitive handling during routine operation and maintenance. The configuration minimizes interface risks and ensures stable synchronization across the complete packaging process.Production Line Integration CapabilitiesOptimized for inline operation, this second hand canning line connects upstream depalletizing to downstream labeling with harmonized conveyor handling. It is suitable for beverage production expansions, pilot facilities, or as a dedicated canning cell within a larger packaging plant. Designed for aluminum cans, it can be interfaced with upstream processing and downstream secondary packaging equipment as needed.Machine TypeManufacturer/ModelYearDepalletizerFilling MonoblockMicro Can CL10Labeling MachineWrap-around labellerMachine Condition & Maintenance HistoryThe line is offered as a complete, ready-to-operate unit. As a used bottling line, it has been configured for immediate deployment in industrial packaging environments, subject to standard site preparation and utilities. Overall condition is consistent with a professionally integrated second hand canning line built for dependable daily operation.Operational Performance & VersatilityWith a rated output of 4,000 cans per hour, the Micro Can CL10 filler/seamer delivers stable filling and precise seaming performance. The wrap-around labeling machine supports continuous production with consistent label application, and the depal... Hsdjzkhtqspfx Ab Isnt