Used Engel Es 200/75 Hl for sale (30,997)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 98,780 h, clamping force: 2,000 kN, overall weight: 12,200 kg, controller manufacturer: ENGEL, controller model: CC100, This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie-bar distance of 920 x 750 mm. Equipped with dual injection units, screw diameters of 40 mm and 25 mm, and a rotary table control. Consider the opportunity to buy this Engel ES650H/200W-200HL-2F hydraulic injection moulding machine. Contact us for more information about this machine. • Clamping unit • Mold weight (WZ): 1500 kg • Total moving weight: 3000 kg • Minimum mold height: 550 mm • Mold opening stroke: 700 mm • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1250 mm • Ejector stroke: 150 mm • Ejector force: 61 kN • Centering ring diameter A-side: 110 mm • Centering ring diameter B-side: 90 mm • Mold locking system: Hydraulic / Pneumatic • Core pull control: Yes • Number of cores: 4 (A-side) • Rotary table control: Yes • Index plate control: Yes • Injection unit 1 (Main) – Type 650H • Max. shot volume: 200 cm³ • Stroke volume: 251 cm³ • Screw diameter: 40 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1930 bar • Injection rate: 142 g/s • Shot weight (PS): 216 g • Plasticizing rate: 26 g/s • Nozzle orifice: 15 mm • Pump motor: 30 / 12.3 kW • Injection unit 2 (Secondary) – Type 200W • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 104 g/s • Shot weight (PS): 60 g • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump motor: ~6.8 kW Ncodpfxeyf H Nne Alhju • Machine axes travel • X-axis (injection unit): 500 mm • Y-axis (rotary table / mold carrier): 1000 mm • Z-axis (clamping unit): 1400 mm • Equipment and options (machine-integrated) • SPC / Process control: Yes • Pressure interface: Yes • Second injection barrel: Yes • Mold monitoring: No • Cavity pressure sensor: p-θ-t-θ (Priam) • Hot runner control: 16 zones • Filter dryer: No • Special programs: Yes • Special option: GealanXcomp • Automation: No • Condition • Well-maintained and serviced Additional equipment • Engel Linear Take-out Robot ERC 23/1-E (included)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ENGEL Typ: ES650H/200W-200HL-2F Baujahr: 2004 Schließkraft: 200 Tonnen Holmabstand Holmlos Einbauhöhe min.: 500 mm Öffnungsweg: 750 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 251 cm³ Spritzteilgewicht in PS: 216 g Schnecke DN 2: 25 mm Max. Hubvolumen: 69 cm³ Spritzteilgewicht in PS: 60 g Steuerung: CC100 Technische Ausstattung: -Roboter Engel, Typ: ERC23/1-E Ncodpfx Ajyak A Ijlhou -4 Stück Kernzüge -Drehtischsteuerung

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 2,942 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, No minimum price – guaranteed sale to the highest bidder! Engel injection moulding machine including robot! Ncedsy Ew U Ajpfx Alhsu TECHNICAL DETAILS Clamping force: 300 tons Screw diameter: 70 mm Max. shot volume: 1,039 cm³ EQUIPMENT 3x core pulls Robot Note: When purchasing multiple items from the same location (see offers below), the respective lower costs for dismantling and loading will be waived.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, clamping force: 3,432 kN, screw diameter: 60 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 350 tons Screw diameter: 60 mm Note: When purchasing multiple items from the same location (see offers below), you will be charged the lowest applicable costs for dismantling and loading. Nedpfx Aey Ew Shelhjcu

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, clamping force: 5,883 kN, screw diameter: 90 mm, injection weight: 2,480 g, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 600 tons Screw diameter: 90 mm Shot weight: 2,480 g MACHINE DETAILS Platen size: 1,480 mm x 1,300 mm Minimum mould installation height: 500 mm EQUIPMENT PVC cylinder with extra screw for PP, PE Nsdpjy Ewtxofx Alhjcu Note: When purchasing multiple items from the same location (see offers below), the most favourable disassembly and loading costs will apply.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, clamping force: 2,451 kN, screw diameter: 70 mm, displacement volume: 1,000 cm³, injection weight: 901 g, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 250 tons Screw diameter: 70 mm Shot volume: 1,000 cm³ Injection weight: 901 g MACHINE DETAILS Enlarged mounting platen: 1,050 x 900 mm Note: When purchasing multiple items from the same location (see offers below), the more favorable costs for dismantling and loading will be waived accordingly. Ncjdpfx Aoy Ewd Rslhsu

Condition: excellent (used), Year of construction: 1998, Angel ES 330/80 HLS Closing 80 tons Year 1998 Nodepdr Aiepfx Alhscu Scrow 35 mm Stroke volume 154 cm3 Enlarged clamping plate 660x560 Mould height min 200 mm

Condition: ready for operation (used), GMN TSE 75 cdu x 200/30000 high-speed spindle, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ncodpfx Alsi Eaa Rohju

Condition: good (used), Year of construction: 1996, Engel ES 330H200V/125 HL – 2F Clamping force: 125 tons Ncedpfx Aljlu Hkieheu Tie bar diameter: 35 mm Tie bar diameter: 30 mm Injection volume: 158 cm³ 98 cm³ Year of manufacture: 1996 Enlarged clamping plate: 740 x 700 Minimum tool installation height: 350 mm Plus rotary platen

Condition: ready for operation (used), Year of construction: 2000, clamping force: 3,000 kN, total height: 2,460 mm, overall weight: 22,500 kg, product length (max.): 7,290 mm, Hydraulic injection moulding machine manufactured in 2000. This Engel ES1800/300HL features a clamping force of 3000 kN and a maximum opening stroke of 850 mm. It offers multiple screw diameter options of 60 mm, 70 mm, and 80 mm, along with a mould installation height of 350 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES1800/300HL machine we have for sale. Contact us for further details. • Screw diameter options: 60 / 70 / 80 mm • Injection unit: ES 1800 • Stroke volume (max): 763 / 1039 / 1357 cm³ • Injection pressure (specific): 1960 / 1441 / 1105 bar • Injection pressure (specific, increased): 2360 / 1735 / 1330 bar Njdpfezg Enwox Alhjcu • Opening stroke: 850 mm • Mould installation height (min): 350 mm • Max. daylight (distance between platens): 1200 mm • Mould fixing platen size (H x V): 1050 x 650 mm (standard) / 1050 x 900 mm (enlarged option) • Ejector stroke: 200 mm • Ejector force: 83 kN • Dry cycle / stroke (Euromap 6): 2.2 s / 300 mm • Oil capacity: 810 l • Pump power: 37 kW (standard) / 45 kW (N-Ausführung) • Heating power: 25.3 / 29.4 / 33.5 kW (standard) or 33.4 kW (N-Ausführung) • Number of heating zones: 5 (including nozzle) • Hopper capacity: 120 l • Control system: Microcomputer EC 100 regulated (standard) / CC 100 regulated (optional) • Standard equipment/features: 10-stage injection speed, 10-stage holding pressure profile, 5-stage screw speed, 5-stage back pressure profile, bimetallic cylinder, ceramic heating bands, energy-saving variable displacement pump hydraulics

Condition: new, Rexroth SE-B2.020-060.00.000 Brushless permanent magnet motor with Heidenhain ERN 221.2123-500 encoder, identification number 270 675 02, serial number as shown in the photo, mounting hole spacing: 81 x 81 mm, drive shaft diameter: 14 mm, unused, 100% functional. Nedpsi D Nthefx Alhjcu

Condition: good (used), I am offering an industrial vertical pump from the renowned German brand ALLWEILER GmbH – model NLT 50-200. This pump is designed for continuous operation in industrial, water, and process installations. The equipment is fully complete with an electric motor. Condition: used – visible signs of storage and slight surface corrosion. ⚙️ Technical data Manufacturer: ALLWEILER (Germany) Model: NLT 50-200 Nodeyxtfwspfx Alhjcu Year of manufacture: 2014 Capacity: 75 m³/h Head: 48 m Rotational speed: 2900 rpm Motor power: 11.6 kW Power supply: 400V (50 Hz) 460V (60 Hz) Connection diameter: approx. 65 mm Design: vertical (vertical inline pump) ✅ Technical condition complete pump with motor no visible mechanical damage rotates freely visual condition as shown in the pictures (storage marks, surface rust)

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine As shown in the pictures, its working condition is uncertain. Overall dimensions :3100 x 1950 x 2600 mm Weight: 5500 kg Manufacturer: Engel Type: ES 330/85 Ncodpfxeukn S Hj Alheu Year of manufacture: 1997 Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Condition: used, Used machine Condition: like new Equipment and technical data to follow Nedjxfc R Hspfx Alhecu

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 135 mm, displacement volume: 8,870 cm³, injection pressure: 1,640 bar, Stock No.: 503583 Manufacturer: ENGEL Type: ES 16050-800 DUO Controller: CC 200 Year of manufacture: 2007 Operating hours: 91708 h Technical Data, Clamping Unit Clamping force: 8000 kN Tie bar distance h x v: 1170 x 1000 mm Platen size h x v: 1550 x 1520 mm Minimum mounting height: 500 mm Maximum mounting height: 1100 mm Maximum platen distance: 2100 mm Opening stroke: 1600 mm Ejector stroke: 300 mm Ejector force: 180 kN Centering of moving platen D: 200 mm Centering of fixed platen D: 200 mm Tool weight: 21600 kg Technical Data, Injection Unit Screw diameter: 135 mm Injection volume: 8870 ccm Injection pressure: 1640 bar Screw length: 22 l/d Screw stroke: 620 mm Screw speed: 100 rpm Screw torque: 14000 N Free injection flow rate: 1245 g/s PS Number of heating zones: 7 Nozzle stroke: 950 mm Dimensions & Weight Machine dimensions L x W x H: 11.81 m x 3.2 m x 2.9 m Total weight: 56000 KG Equipment Screen text German Screen text English CEE socket 16A CEE socket 16A CEE socket 16A Compact Flash drive Hydraulic core pull 1x Ncedpfx Aszgt Rtslhju Machine including handling system Machine including safety enclosure Machine with water manifold Interface EUROMAP 12 Interface for handling system USB interface Tool heating 16x Technical Data, Handling System Machine type: Linear Manufacturer: ENGEL Controller: ERC 64/1-F Year of manufacture: 2007 Handling system weight: 25 kg X-axis: 1300 mm Y-axis: 2200 mm Z-axis: 4760 mm

Condition: excellent (used), Year of construction: 2007, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 200/28 TECH Baujahr: 2007 Schließkraft: 28 Tonnen Ncedpfxju Eu Tns Alhsu Holmabstand: HOLMLOS Schnecken DN: 25 mm Max. Hubvolumen: 49 ccm³ Spritzteilgewicht 44 g/PS Steuerung: CC200 Ausstattung: - 1 x Kernzug

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Ncjdpfxjy Ui Nqs Alhou Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 21953, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 405 mm, injection pressure: 1,300 bar, injection weight: 239 g, ejector stroke: 100 mm, installation height: 430 mm, total length: 3,910 mm, total width: 1,380 mm, total height: 2,050 mm, overall weight: 4,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, The machine is in good condition and has been maintained during operation with short maintenance intervals. The machine is connected and fully functional. An inspection with test run is possible. All machine documentation is available. The screw, heating cylinder tube, and RSP were renewed in 2022 by Plasma Kunststofftechnik. Basic data: - No: 21953 - Year of manufacture: 1991 - Weight: 4000 kg - Clamping force: 800 kN - Dimensions: 3910 mm x 1380 mm x 2050 mm (LxWxH) - Control system: CC100 Technical details: - Operating voltage: 400V 3~ 50Hz - Screw diameter: 45 mm - Screw geometry: 3-zone - Max. dosing stroke: 160 mm - Nozzle thread: M28x1.5 - Max. injection pressure: 1300 bar - Shot weight PS: 239 g - Tie bar spacing, horizontal: 405 mm - Tie bar spacing, vertical: 345 mm - Max. opening stroke: 430 mm - Min. installation height: 150 mm - Max. installation height: 430 mm Nedpjxcw T Rofx Alhscu - Centering diameter: 125 mm - Cooling circuits: 6 - Core pulls: 1 - Max. ejector stroke: 100 mm - Excl.: Piovan dosing unit, conveyor belt

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Manufacturer: ENGEL Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Ncodpfsy Au I Uex Alhju Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products. Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results. The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production. The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production. The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition. The ENGEL INSERT series is particularly suitable for: * insert molding applications * metal/plastic combination parts * electronic component production * connector and cable technology * technical plastic parts * precision industrial products With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

Condition: good (used), Year of construction: 2013, Ref. no.: 18494 Manufacturer: ENGEL Type: Victory 50-200 Spex Year of construction: 2013 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Mould height min.: 200 mm Opening width: 600 mm Platen size (h x v): 500 X 450 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2400 bar Measurements and weight Dimensions: 3,4 x 1,3 x 1,8 m Machine weight: 2900 kg Additional information & extras Core pull: 1 pcs Further information: ENGEL ENGEL Victory 50 SPEX (2013) – Tie-Barless Injection Moulding Machine For sale is a high-quality ENGEL Victory 50 SPEX injection moulding machine from 2013. Featuring tie-barless technology and a special SPEX configuration, this machine is ideal for precise and flexible production. Key Advantages: Tie-barless design → maximum mould accessibility SPEX special configuration → optimized for specific applications High precision & repeatability Energy-efficient operation Compact design → space-saving Automation-ready (robot interface possible) Applications: Automotive industry Electronics Medical parts Nsdpfx Alexzq Skohecu Technical plastic components 👉 Machine in good working condition. Inspection possible upon request.

Condition: used, Year of construction: 2006, operating hours: 4,500 h, VICTORY 200/80 Power SN: 50294 Year: 2006 Closing force (kN): 800 S10 screw, diameter 30mm Operating hours: ONLY 4,500 Mounting plates enlarged vertically Mould heater with 12 control loops HV 2 version with control pumps (pressure and flow control in a closed control loop) for parallel movement sequence Microcomputer CC100 A03 Ethernet interface for use with EMS 8x digital output, 8x digital input Interface for ejector protection Interface for temperature control units, Data protocol: Engel, physical type: 20MA-CL Microflow MINI-CAM: Process parameter adjustment support based on an expert system 2-pole service socket, 230V 6x 3-phase socket, 10A / 16A 2x 3-phase socket, 10A / 16A, switchable 2/2-way magnetic air valve, R1/4 inch Flow regulator 0-10 l, 4 circuits Temperature control circuits can be switched off manually or automatically (centrally at the flow controller) - Switch-off function selectable. Nedpfx Alezcanrjhscu Tubing for flow controller, 4 temperature control circuits

Condition: used, Year of construction: 2003, operating hours: 6,500 h, VICTORY 200/60 Power SN 162699 Closing force (kN) 600 (expandable to 800 kN) Year of manufacture: 2003 Screw diameter 30.00 mm, L/D ratio of the mixing cylinder 20.50 Operating hours: ONLY 6,500 Vertically enlarged clamping plates (B-plates) Swiveling reject chute for reject selection, activated upon reject detection Version variant HV 2 with control pumps (pressure and flow control in a closed-loop control system) for parallel movement sequence Microcomputer CC100 A03 Kistler 5155 A2213Q02 charge amplifier with automatic switching pressure detection Nodpfxjzcanfs Alhecu 4x digital output, 4x digital input Interface for temperature control units or hot runner controllers Data protocol Engel, physical type 20 mA – CL Microflow MINI-CAM - Process parameter adjustment support based on an expert system 1x service socket, 2-pole, 230V 4x 3-phase socket, 10A / 16A 2x 3-phase socket, 10A / 16A, switchable 2/2-way solenoid air valve, R1/4 inch Flow regulator 0-10 l, 8 circuits Temperature control circuits can be switched off manually or automatically (centrally at the flow controller) – Switch-off function selectable.

Condition: excellent (used), Year of construction: 2006, operating hours: 69,000 h, functionality: fully functional, machine/vehicle number: 163769, Here we offer a permanent maintained injection molding machine. from the following machine we have other machines of the same type and same year in stock also with Geiger Robot Manufacturer Engel Type Victory 200/80 Tech Ncedpom Nclvofx Alhou year of construction: 2006 Control system: CC 200 Extras -installed Languages: German Englisch -25 mm (wear and corrosion protected) - control CC200 - enlarged clamping plates (B plates) - minimum installation height 250 mm - maximum platen distance 700 mm - quality switch / PD protocol + graphics - 5 x CEE 400 V / 3 x Schuko 230 V - 4 freely programmable inputs and outputs - handling interface Euromap 12 - Host computer interface Engel EMS - Geiger EA Mini 2001 SLI (#156686 0504 4417 / year 2005) - without material hopper or conveyor Clamping unit clamping force: 80 to./ 800 kN tie bar dimension: tie bar-less clamping platens: 730 x 600 (hxv) platen distance: 700 mm max installation height: 250 mm min. opening stroke: 450 mm Injection unit screw diameter 25 mm stroke volume: 69 ccm injection pressure: 2090 bar / 2400 increased Weight: 5,200 kg. dimensions: 4,00 mtr. x 1,40 mtr. x 2,00 mtr LxWxH from our warehouse Hannover /Germany free loading on truck of the buyer or free delivery against freight reimbursement Viewing under electric power possible functional guarantee

Condition: like new (used), Year of construction: 2008, operating hours: 58,000 h, functionality: fully functional, clamping force: 1,000 kN, super well-maintained injection molding machine from clean room (pharmaceutical production) - fully functional with functional guarantee - with GEKU SR 500 ST. linear robot - perfect optical condition Technical data Manufacturer Engel Type e-max 200/100 serial number 170609 Nsdsubamvjpfx Alhocu Year of construction 2008 Operating hours 58774 h approx. Dimensions L/W/H 4.0 x 1.3 x 1.9 mtr. Weight 3,900 kg Fully functional Condition excellent Clean room Special Control unit CC200 Screw ⌀ 25 mm Injection weight 55 gr./hp Injection pressure 2400 bar Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm mold mounting height 150-450 mm max distance between platens 800 mm Opening stroke 350 mm Ejector stroke / force 100 mm / 25 kN Clamping unit electric Connected load: 45 KW Rated current: 69 A The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras GEKU Robot SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping FCA-free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing On request - installment plan option Price: On request

Condition: used, Year of construction: 2005, operating hours: 81,700 h, clamping force: 45 kN, displacement volume: 69 cm³, injection pressure: 2,400 bar, overall weight: 3,300 kg, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: % prior to delivery Manufacturer: Engel Type: VICTORY 200/45 Tech + er/usp Condition: aus laufender Produktion Operating hours: ca. 81.700 CLAMPING UNIT: - Clamping force: 45 t Öffnungsweg: 355 mm Mould installation height min.: 175 mm Nedperbqtnofx Alhecu Mould installation height max.: - Tie bar distance (h x v): holmlos Plate dimension (h x v): 550 x 430 mm Centering (fix- movingplate): / mm INJECTION UNIT: IU200 Screw diameter: 25 mm Injection weight in polystyrol: 63 g Stroke volume: 69 cm³ Einspritzdruck: 2.400 bar CONTROL: CC Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Angußpicker er/usp Other equipment: Nadelverschl. Hydr., Schnittstelle Dosier- und Temperiergerät GENERAL DATA: - Installed heating capacity: 6,8 kW Pump drive power: 11 kW Total installed power: Motor + Heizung Total weight: 3.300 kg Total size L x B x H: 3,3 x 1,2 x 2,2 m