Used Erlab Erlab Captair Chem Filtair 936 Filtration Extractor Fume Hood Laboratory Extractor 200 M³/H for sale (97,668)

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 620 kg, filter area: 60 m², suction capacity: 5,000 m³/h, negative pressure: 2,500 Pa, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based system for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Kemper System 8000 The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Fedpfszil Ivox Ap Djpn Year of manufacture: 2003 Fans with a power of 5.5 kW. Flow rate: 5000 m3/h Vacuum: 2500 Pa Filtration area: 60 m2 Stock number: 1147

Condition: new, functionality: fully functional, overall weight: 450 kg, Year of construction: 2022, machine/vehicle number: 41728980, THERMOBILE, IMA-200 RHP GB 200-RHP, mobile warm air generator (400 V) with separate exhaust gas duct, mounted oil burner RG 4, heating oil pre-filter, radial fan and plug-in thermostat preparation. Year of manufacture 2022, operating hours: 0 - Nominal heat load 200 kW - Air output 13000 m³/h - Connection 400 V - Pressure 500 Pa - Weight 450 kg Technical highlights of this series: - Burner hood with oil drip pan - Blow-out opening Ø 600 mm - Preparation for recirculation operation (optional intake manifold available, article no. TE41728445) - Thermostat connection prepared (plug-in contact) - Electrical distribution placed in a shock-protected manner Fpsdpfxevnuq Ij Ap Den - Robust design with large wheels for easy Transport even on difficult terrain Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as exhaust pipes and rain hats are not included in this offer, but can be offered on request. Note: The buyer can have the item picked up by a freight forwarder. If you do not have contact with any shipping companies, we will be happy to provide you with addresses or make inquiries for you.

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, overall weight: 95 kg, Equipment: documentation/manual, type plate available, Extraction capacity of filter unit at spigot*: 2200 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Dimensions L/W/H in mm: L 1623 / W 508 /H 545 Colour: RAL 7035 Weight: 95 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Filter equipment*: - 40 mm aluminium mesh pre-filter (optional/retrofittable: PrePac pre-filter package) Fsdpeum Uzaefx Ap Djpn - 1 piece electrostatic filter cell - 20 mm knitted aluminium post-filter (optional: 40 mm post-filter range) OPTIONAL: Several pre-filter packages possible The application: Horizontal, electrostatic air cleaner with EC centrifugal fan for separating oil mist, emulsion mist and smoke from the hall air in recirculation mode. Vertical raw air capture via intake manifold with suction nozzle. Clean air recirculation via adjustable diffusion grille. Your advantages of the ELBARON series: - 6 appliance variants available - Directly from the manufacturer - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large programme of mounting and connection accessories - Quality made in Germany We have developed the hall extraction system as a cost-effective alternative to expensive centralised extraction systems or complex individual machine extraction systems. This allows you to protect the health of your employees and maintain your factory building without major investment. We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter devices on the market and are in use worldwide.

Condition: used, Year of construction: 2012, functionality: fully functional, Control system: Matrix II Travel ranges: X-axis 207 mm X2-axis 141 mm Y-axis 100 mm Y2-axis 70 mm Z-axis 760 mm Z2-axis 815 mm Main spindle: Drive power 22 kW Max. spindle speed 5,000 rpm Spindle nose A2-6 Counter spindle: Drive power 22 kW Max. spindle speed 5,000 rpm Spindle nose A2-6 Fpjdpfx Apjz Dtmgj Djn Tool turret: Number of tool positions 24 Max. speed of driven tools 6,000 rpm Tool stations 24 Driven tool stations 24 2 pcs. 12-position turret Max. turning diameter: Max. turning diameter (upper turret) 344 mm Max. turning diameter (lower turret) 210 mm Max. swing diameter: Max. swing diameter (upper turret) 370 mm Max. swing diameter (lower turret) 320 mm Additional equipment: Bar feeder LNS Robot interface Automatic door Tool setter on the right and left Chip conveyor, discharge to the right Separate coolant system 15 bar high-pressure pumps Coolant temperature control

Year of construction: 2008, condition: used, functionality: fully functional, FREWITT MF-LAB – PHARMACEUTICAL LABORATORY MILL / GRANULATOR For sale: FREWITT MF-LAB laboratory mill / oscillating sieve mill, used in pharmaceutical applications, in excellent used condition. The machine is supplied with an extensive package of 13 original sieve inserts in different sizes, as well as comprehensive original documentation and qualification documentation. TECHNICAL DATA Manufacturer: FREWITT SA, Switzerland Model: MF-LAB Year: 2008 Serial No.: 6180310817 Electrical supply: 400 V / 50 Hz Current: 16 A Design: ATEX APPLICATION The MF-LAB is designed for laboratory and pharmaceutical applications and can be used for gentle size reduction, calibration, and sieving of dry or moist products. Particularly suitable for: - Pharmaceutical R&D - Laboratory and pilot applications - Granule calibration - De-agglomeration - Sizing and sieving - Heat-sensitive products EXTENSIVE SIEVE PACKAGE A major advantage of this machine is the large number of included sieve inserts. Included are 13 marked sieve inserts in 9 different designs/sizes. Fodpfx Apezxdgio Depn All sieves shown in the photographs are included in the scope of supply. DOCUMENTATION Comprehensive original documentation and qualification documentation are available with the machine. CONDITION Excellent, very clean used condition from pharmaceutical use. Inspection and demonstration can be arranged by appointment at CYCRON GmbH in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged upon request. CYCRON GmbH Switzerland Invoice will be issued by CYCRON GmbH. Subject to prior sale and errors.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 150 mm, The KT1200 coordinate table with TSB 35 (drilling machine by Knuth) allows for high efficiency – maximum time savings, as the time-consuming measuring, marking with high tolerances, center punching, and manual positioning are no longer necessary. Functionality – precise positioning capability and absolute repeat accuracy thanks to adjustable stops. Coordinate Table Technical Data: - Max. travel distance x-axis: 1,200 mm - Max. travel distance y-axis: 150 mm - Max. workpiece weight: 60 kg - Vices: 2 pcs. - Max. clamping width of vice: 158 mm - Max. clamp opening of vice: 140 mm - Required space (L x W x H): 1850 x 560 x 2000 mm - Repeatability: +/- 0.2 mm - Electronic position indicators Fjdpfx Asx E Sl Nsp Dopn - Position stops: 8x (x-axis) - Travel movements x and y: 2x handwheel with clamping Knuth TSB 35 Drilling Machine Technical Data: - Drilling capacity in S235JR: Ø 35 mm - Continuous drilling capacity in S235JR: Ø 25 mm - Thread cutting in S235JR: M22 - Spindle taper: MK 4 - Speed range: 125 – 3030 rpm Subject to prior sale. No warranty for typographical errors or mistakes.

Condition: good (used), Year of construction: 1999, thermal exhaust air combustion system, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter -Thermal exhaust air combustion plant: Manufacturer LTG Type 20000 Nm³/h -Protocols: regarding maintenance and emissions are available -Documentation: complete -Combustion chamber temperature: 850° C -Heating fuel: Natural gas -Calorific value: 10 kWh/m³ -Connected load: 45 kW -Exhaust air volume: 20,000 Nm³/h -Max. solvent quantity: 1.5 g/m³ -Individual components: see photos Fpodpfx Apovtzdlo Den

Condition: excellent (used), Standard steam boiler 2000 kg/h 22 Bar (2166) oil or gas burner Fpsdpfxexqr E Dj Ap Djn

Condition: excellent (used), I am offering for sale a high-quality RÖHM KFD-HS 200/3 hydraulic lathe chuck, designed for professional CNC lathes. The chuck is in very good technical and visual condition. It looks practically new and appears to have been used only a few times. The working surfaces and guides show only minimal signs of use. The set includes: * RÖHM KFD-HS 200/3 lathe chuck, * 3 standard jaws, * 3 RÖHM 538-55 top jaws, * operating wrench, * sturdy wooden transport box (I am not sure if this is the original box for this chuck). Technical data: * Manufacturer: RÖHM * Model: KFD-HS 200/3 * Diameter: 200 mm * Type: hydraulic 3-jaw lathe chuck * Maximum clamping force per jaw (Fmax): 48 kN * Total clamping force (Fges): 110 kN * Maximum rotational speed: 6500 rpm * Identification number: 155099 * Top jaws: RÖHM 538-55 * Country of manufacture: Germany Fjdpfx Aszlaqkjp Dspn The chuck is ideal for professional applications in machining and working on CNC lathes. It is a robust piece of equipment from the renowned German company RÖHM, which is valued for its high quality and precision.

Condition: good (used), Year of construction: 2005, Clamping force: 200 t Fpodpfxoyz Tmyo Ap Don Screw diameter: 50 mm Screw dia 2 : 22 mm Distance between tie bars V: 580 mm Distance between tie bars H: 580 mm Type: Multicomponent (2K injection) Drive: Hydraulic 2x hydraulic valve

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, overall weight: 2,000 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,200 mm, total height: 4,250 mm, filter area: 286 m², suction capacity: 18,000 m³/h, negative pressure: 3,500 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-operated for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 16 Year of manufacture: 2010 Fsdpfx Ajz Ayv Ujp Dspn Cartridge filter elements, oval - DFO ULTRA-WEB FR - 16 pcs Filtration area: 286 m2 Fan power: 18.5 Kw Fan model: FR 501 Built-in frequency converter. Remote monitoring of the device is possible thanks to Donaldson's iCue technology. Capacity up to 18000 m3/h Inlet diameter: 630 mm Noise silencer included. New filter elements, custom-made according to the device's intended use, are also available on request. Stock number: 1155

Condition: used, Year of construction: 2022, operating hours: 150 h, functionality: fully functional, machine/vehicle number: AMW200SM56T4002J, Microwave thawing unit for fast and waste-free thawing of frozen meat, poultry, and fish blocks, etc. Equipped with a chamber for cyclic operation (loading – thawing – unloading). Fpodpfx Apex D Aqde Den Ideal for thawing frozen blocks within minutes (temperature change from -20 °C to -4/-2 °C). The blocks remain sufficiently cooled for further processing (cutting/mincing). Thawing time from -20 °C to -2 °C may vary depending on the thickness of the blocks. Power: 10 kW Voltage: 3 x 400 V, 50/60 Hz Single batch load: up to 55 kg (e.g., 2 blocks of 600 x 400 x 200 mm each) Thawing time: 4–15 minutes (depending on desired state after thawing) Microwave frequency: 915 MHz Water pressure: 4 bar Water consumption: 12 l/min at a temperature of 18–22 °C Air consumption: 20 liters/minute Air pressure: 6 bar All further information is available on request.

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 Waterjet Cutting System for Sale For sale is a very well-maintained Flow Mach 200 waterjet cutting system, manufactured in 2021, with extremely low operating hours of only approximately 500 hours. The machine was used exclusively for single and small series production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive manual desliming system – EKOWA cutting water treatment – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath Fjdsy Urzispfx Ap Depn – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Special features: – Very low wear due to low operating hours – Complete documentation available – Operator training provided – Well-maintained overall condition – Ready for immediate use Asking price: €105,000 net Inspection possible by appointment. Further pictures and information are available upon request.

Condition: refurbished (used), Year of construction: 2006, load capacity: 200 kg, arm reach: 2,400 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots are the obvious choice for a wide range of applications – e.g. handling or spot welding. Model: KR200 COMP Payload: 200 kg Reach in mm : 2400 mm Condition: Used & Tested & Refurbished Year: 2006 (Multiple options available) Included: Manipulator + KRC2 ed05 Cabinet + Teachpendant + All Wire Sets + 1 year of warranty PLC MERKEZI Refurbishment Services Include: • Cleaning: The surface of the robot panel and the robot has been cleaned. • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. • Battery Changing: All batteries have been replaced with the new ones. • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. Shipment expenses are not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.We also offer custom engineering services and design for your specific production needs. (Source: Kuka's Website) Fpsdow H Az Rjpfx Ap Dsn

Condition: used, Year of construction: 1998, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 80 kN Ejector retraction force: 35 kN INJECTION UNIT (840) Screw diameter: 50 mm Fedjz D U Rmepfx Ap Djpn L/D ratio: 20 Injection pressure: 1946 bar Stroke volume: 442 cm³ Shot weight (PS): 400 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 14.8 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l

Year of construction: 2017, condition: new, Size: 040-200 Fsdpfsh I D Dyex Ap Djpn Impeller diameter: 190 mm Q: 32 m3/h H: 51,00 m

Condition: excellent (used), The milling cutter motor has a power of 37 kW, and the roller drive motor has a power of 4 kW. Fpsdezxc Aiopfx Ap Djn

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 100708, feed length X-axis: 6,300 mm, feed length Y-axis: 250 mm, feed length Z-axis: 200 mm, overall weight: 2,500 kg, saw blade diameter: 700 mm, input voltage: 400 V, saw blade bore: 30 mm, We offer this used H&M HM-Z Automatic Through-Feed Machine, year of manufacture 2008. Machine: HM-Z Type: 4-F Serial number: 100708 Production date: 15-04-2008 Connection voltage: 400 V Power: 19 kW Weight: 2500 kg Air pressure: 6-10 bar Maximum saw blade diameter: 700 mm Minimum saw blade diameter: 600 mm Saw shaft hole diameter: 30 mm Maximum milling cutter diameter: 400 mm Minimum milling cutter diameter: 300 mm Cutter shaft hole diameter: 60 mm Fedpjy H Dblsfx Ap Djpn Completely overhauled in 2024 by Diba Machinehandel and has hardly been used since, due to an additional business activity. Must go due to lack of space. Infeed section adapted to a working length of 7 meters during the 2024 overhaul. H&M crosscut saw: approx. 19.5 x 4 meters Price is exclusive of dismantling, transport, assembly and accessories, valves, pipes, extraction hoses, and power cables. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), For sale: Professional industrial extraction unit by TEKA, model STRONGMASTER BIA, designed for welding fume extraction and air pollution control. ‼️ VERY LOW HOURS – ONLY 1,550 OPERATING HOURS (this is rare for this type of equipment) ⚙️ Technical specifications: Manufacturer: TEKA (Germany) Model: STRONGMASTER BIA Capacity: 3,000 m³/h Fpjdpfx Ajyz Dilop Dsn Max. negative pressure: 2,500 Pa Motor power: 1.1 kW Power supply: 400V (3PH + N + PE) Frequency: 50 Hz Rated current: 2.5 A Protection class: IP54 Control voltage: 24V Weight: approx. 130 kg 🔧 Equipment: Flexible extraction arm Industrial filter Control panel Operating hours counter Mobile chassis with wheels 🔍 Condition: Used equipment, in good technical condition. Normal signs of use visible. ✅ Low hours – only 1,550h ➡️ Equipment is only lightly used ➡️ Significant potential for further operation

Condition: excellent (used), Year of construction: 2020, For sale is a used Drechselmeister Twister FU 200 woodturning lathe with a center distance of 715 mm. The machine is in good condition. Technical specifications: - Center height: 200 mm - Max. turning diameter: 395 mm (700 mm with optional outboard turning attachment) - Center distance: approx. 715 mm (optionally extendable) - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 Fsdsyucw Tepfx Ap Dopn - Speed ranges (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Tailstock quill travel: 100 mm (trapezoidal thread), prepared for ER-25 drill quill - Motor: 2 HP (230 V connection) - 2-stage brake switch - Weight, floor-standing version: 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Sale subject to prior sale! Related terms: woodturning lathe, lathe, turning machine, wood lathe, turning, turning tools, woodturning, machining, machine Reference: B18OO

Condition: used, This listing is for Cytiva Axichrom 200/300 chromatography column The unit is in full working condition and ready for immediate use The Cytiva Axichrom 200/300 is a large-scale chromatography column designed for bioprocess purification applications. It provides controlled packing and efficient separation for purification processes, making it suitable for laboratories, research facilities and industrial bioprocessing environments For all available chromatography columns please click ?q=Chromatography+Column Fjdpfx Ajzqf Hbop Depn Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Popular Uses include – purification of drugs, antibodies, proteins and other active ingredients. – purification of proteins, enzymes, antibodies, vaccines and other biologics. – research into proteins, DNA, metabolites, pharmaceuticals and chemical compounds. – separation and purification of chemical substances and intermediates. – analysis of sugars, flavours, additives, contaminants and other components. – testing water, soil and air samples for pollutants and contaminants. – analysis of drugs, metabolites, hormones and other biological compounds. – analysis and separation of hydrocarbons and petroleum products. – analytical and purification services for pharmaceutical and biotechnology companies. – downstream processing and purification of fermentation products.

Year of construction: 2015, condition: good (used), Output: 1200m3/h Fpodpfsrlm Ebox Ap Dsn motor: 2.2 kW

Year of construction: 1990, condition: excellent (used), Production: KOJA Year of manufacture: 1990 Power: 200kW, 370A RPM: 1485 rpm Air delivery: approx. 100,000 m3/hour Suction side: diameter 800mm Pressing side: 800 x 620mm Impeller diameter: 1800mm Housing dimensions: 3400x3100x2400 Net weight with engine: approx. 4.5t Aerodynamic control with inlet guide vane, grease-lubricated anti-friction bearings. Fpsdpfsrgqm Hox Ap Den The machine can be disassembled and transported with a standard truck.

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 240 mm, travel distance Z-axis: 430 mm, overall weight: 4,500 kg, controller manufacturer: SIEMENS, controller model: Sinumerik, number of axes: 2, This complete automated production cell includes two Hyundai HIT-200C CNC lathes and a FANUC M-20iA industrial robot with a ROBOTOWER automatic loading and unloading system. Each lathe offers a maximum turning diameter of 340 mm and a maximum turning length of 420 mm. The complete cell is designed for automated serial production, especially for larger production batches. Contact us for further details regarding this production cell. • 2 x Hyundai HIT-200C CNC Lathes • Year of manufacture: 2003 Fedpfoznm H Rjx Ap Djpn • CNC control: Siemens Sinumerik • Maximum turning diameter: 340 mm • Maximum turning length: 420 mm • X-axis travel: 240 mm • Z-axis travel: 430 mm • Spindle nose: A2-8 • Spindle bore: 80 mm • Hydraulic chuck: 10" • Machine weight: approx. 4,500 kg each • Rigid and dimensionally stable construction • Capable of maintaining IT6 tolerance class Additional Equipment / Automation • FANUC M-20iA industrial robot, year 2014 • ROBOTOWER automatic loading and finished-part unloading station • Automatic handling of raw and finished parts • Set of robot grippers • Operating manuals • CE documentation • Complete production cell suitable for serial production, especially for batches of 500 parts or more • Robot and loading/unloading system in very good condition • LOSMA air filtration units (oil mist collectors) visible in the photos is not included in the offer Technical Specification Counter Spindle No Driven Tools No

Condition: like new (used), Year of construction: 2016, functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 230 kg, temperature: 140 °C, The MH-8P 180/2000 model is ideal for medium-sized and large industrial facilities where cleanliness is a top priority. The hot water cleaner is also successfully used in transportation companies, auto repair shops, and agriculture. It is also popular with private customers who value the highest cleaning quality. Hot water cleaners are particularly recommended for areas with grease or oil contamination. Water temperatures above 70°C enable dirt removal up to five times faster than cold water cleaners! Technical Specifications: Model: MH-8P 180/2000 Manufacturer: NILFISK Condition: Display Unit Year of Manufacture: 2016 Power Supply (~/V/Hz): 3 / 400 / 50 Pump Output (l/h): 2000 Operating Pressure (bar): 180 Maximum Pressure (bar): 250 Maximum Water Temperature (°C): 70–140 Connected Load (kW): 12 Power Cable (m): 5 Fuel Tank (l): 32 Chemical Tanks (l): 15+10 Weight (kg): 230 Dimensions (L x W x H) (mm): 1190 x 702 x 1020 Equipment: High-Pressure Gun: Nilfisk Ergo 3000 – 250 bar – 150 °C High-pressure hose: Nilfisk Longlife DN10 – 500 bar – 155 °C Spray lance: Nilfisk Tornado 1120 mm – 300 bar with pressure regulation Nozzle: Flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt-removing power. Fpedpfxjwqw Tpe Ap Djn External control panel: Wired Schneider Electric remote control for controlling machine functions without having to go to the machine. Key features: The easily accessible water filter protects the pump from impurities in the water. Water softening system protects the heating coil from limescale deposits. Convenient handles on the housing + integrated nozzle storage Open oil system – no operating time limit Two integrated chemical tanks allow the cleaning fluid to be dosed directly via the machine. Easy-to-read and intuitive control panel The simple design and easy access to the individual components under the housing make the machine user-friendly and easy to maintain.