Used Fawema Fa 310/Plk 310 for sale (5,705)

Condition: good (used), Year of construction: 1997, Max. cutting width: 310 mm Gedpfx Aozzrckeatokb Chain width: 340 mm with spikes Max. cutting height without rake: 90 mm Max. cutting height with rake: 75 mm Engine power: 30 kW

Condition: good (used), Swivel bending machine, a press brake from the renowned manufacturer Schröder. Gjdpfjz Ad Rvex Aatskb Capacity: 3mm steel, aluminum, etc., and more. Working width: approximately 2.04m. Weight: approximately 2.4 tons. Easy to operate. Manual and foot controls. Optionally, a segmented upper beam or a back gauge is available. The machine comes from private use. Loading with a forklift is no problem. On-site testing is, of course, possible. You will receive an invoice according to §25a UStG – the VAT is included in the invoice amount. Subject to differential taxation. Optionally, a matching plate shear, 2m, 3mm, is available – a set price is also possible. Other equipment and tools for sheet metal processing are available.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, REX BIGMASTER Planer A+D+FR+FL+AFV+NSH+HFRo+HFRu 6 spindles + 2 chamfering units. Spindle arrangement: U-O-L-R-O-U Feed rate controlled by frequency inverter up to 80 m/min. Planing width 310 mm. Planing height 205 / 300. Positioning control. Electrical control cabinet with control unit and power supply. Gedpjzrtpmjfx Aatekb Control panel. Soundproof cabin. 2 sets of tools. Technical documentation.

Condition: used, Year of construction: 2007, turning diameter 200 mm Godpfxozzfbys Aatskb turning length 393 mm control Siemens 810D weight of the machine ca. 3200 kg

Year of construction: 2018, operating hours: 4,700 h, condition: ready for operation (used), functionality: fully functional, For sale are four used cogeneration units, type ENGUL 310 XACB, in an open-skid design. The units consist of a gas engine, a generator, and the corresponding technical components. The systems have previously been operated with syngas/synthesis gas and are suitable for professional operators, plant builders, as well as Gjdpfx Ajzyc Easatjkb projects for reuse, overhaul, or technically verified fuel conversion. Of particular interest is the low operating hours of approximately 4,700 engine hours. In addition, photo documentation and operating displays are available, which document the synchronous parallel operation of the four units.

Condition: excellent (used), Year of construction: 2012, GILDEMEISTER - CTX 310 eco V3, year of manufacture 2012, spindle hours approx. 8000 hours Turning diameter 210 mm Turning length 580 mm Control system 840 D Siemens Center height 190 mm Turning diameter over the bed 330 mm Turning diameter over the compound slide 260 mm Spindle speed range - main spindle max. 4,000 rpm Drive power - main spindle 10 / 7.5 kW Max. torque 115 / 86 Nm Gedpfx Aszumn Usatokb Spindle bore 68.5 mm Usable bar diameter 51 mm C-axis 0.001 ° Travel - x 185 mm Travel - z 455 mm Number of tool positions 12 Tool holder VDI 30 Driven tool stations: 6 Tailstock travel 400 mm - Chuck including various jaws - 12 VDI 30 tool holders - Driven tools: none - Chip conveyor

Condition: good (used), Year of construction: 2019, functionality: fully functional, For sale is a high-quality, all-in-one winter combination machine, type 5K 310-2600, manufactured in 2019. This machine combines several processing units in a compact design and is ideal for carpentry workshops, joineries, and demanding woodworking applications. The technical data has been taken from the nameplate. Technical data Manufacturer: Winter Holztechnik GmbH Type: 5K 310-2600 Year of manufacture: 2019 Machine no.: 201904001 Weight: approx. 575 kg Voltage: 400 V / 3 phases / 50 Hz Jointer and Thicknesser Motor power: 2.8 kW Planing width: 310 mm Knife shaft Ø: 70 mm 3 knives Knife shaft speed: 4,800 rpm Removal rate (jointing): max. 4 mm Removal rate (thicknessing): 2 mm Feed speed: 6 m/min Jointing table: 1,380 × 310 mm Thicknessing table: 540 × 306 mm Max. feed height: 235 mm Sliding Table Circular Saw Motor power: 3.8 kW Saw blade Ø: 315 mm Main saw blade speed: 4,500 rpm Cutting width with parallel fence: up to 860 mm Sliding table: approx. 1,260 mm Blade tilt: 90°–45° Spindle Moulder Motor power: 2.8 kW Spindle diameter: 30 mm Working height: 100 mm Speeds: 1,800 / 3,000 / 6,000 / 9,000 rpm Mortising Machine Drill chuck: 16 mm Drill stroke: 140 mm Table size: 500 × 210 mm Max. workpiece length: 1,250 mm Equipment Spindle Moulder Jointer and Thicknesser Mortising Machine Sliding table Angle and parallel fence Godpfx Aezfilwoatskb Compact multi-function machine for space-saving work Transportation possible for an extra charge! Note The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, REX BIGMASTER Planer A+D+FR+FL+AFV+NSH+HFRo+HFRu 6 spindles + 2 chamfering units. Godozrtn Njpfx Aatekb Spindle arrangement: U-O-L-R-O-U Feed rate controlled by frequency inverter up to 80 m/min. Planing width 310 mm. Planing height 205 / 300. Positioning control. Electrical control cabinet with control unit and power supply. Control panel. Soundproof cabin. 2 sets of tools. Technical documentation.

Condition: excellent (used), Year of construction: 2006, operating hours: 8,513 h, functionality: fully functional, machine/vehicle number: 8042942323C, We are offering this refurbished Gildemeister CTX 310 V4 CNC SIEMENS 840 D SHOPTURN CNC turning and milling center, year of manufacture 2006. Serviced and prepared for transport Extensive tool accessories included, such as tool cabinets and measuring devices Year of manufacture: 2006 Weight: 3950 kg Maximum spindle speed: 6000 rpm Connected load: 26 kVA Max. connection current: 35 A Current: 38 A Mains voltage: 400 V Gkodsyvfq Sopfx Aatob Frequency: 50/60 Hz Control voltage: 230 V Control power consumption: 150 W Internal voltage: 24 V If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, mileage: 5,84,500 km, power: 228 kW (309.99 HP), first registration: 03/2011, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, Year of construction: 2011, Equipment: ABS, crane, electric window regulation, power assisted steering, power mirror, = Additional options and accessories = - Disc brakes - Immobilizer - Radio - Toolbox = Remarks = Crane Number of hydraulic extensions: 5 Number of manual extensions: 2 Gksdozyb Nkopfx Aatob DAF CF 75-310, 2011, 584,500 km 6x2 with Steering shaft (steering shaft fault), Fassi F260XP, 5x Hydraulically extendable, 2x Extra manually extendable = More information = Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Steering Crane: Fassi F260XP = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: good (used), Year of construction: 2006, MACHINE Wire EDM Machine Manufacturer: Mitsubishi Machine Model: FA 20 Control: Year of Manufacture: 2006 TECHNICAL DATA Travel distances - X-axis: (mm) 500 - Y-axis: (mm) 350 - Z-axis: (mm) 300 Gkedpfx Aezr Uuqeatjb Machine Table - Table size, fixed table L x W: (mm) 780 x 630 - Max. table load: (kg) 1,500 - Workpiece dimensions: (mm) 1,050 x 800 x 295

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: Powerline FA 500.3, HSM Powerline 500.3 The flagship model of the HSM Powerline high-performance document shredder series. This powerhouse is perfectly suited for shredding large quantities of documents in archives or central shredding facilities. Godpfjy Anvrex Aatokb Premium materials and HSM’s proven high manufacturing standards, "Made in Germany," ensure that the machine is safe and built to last. Specification Application: Archives / Central Offices Cutting type: Particle cut Cut width: 3.9 mm Particle length: 40 mm Security level (DIN 66399): E-3 | F-1 | O-3 | P-4 | T-4 Sheet capacity, 80 g/m²: 180 – 200 Cutting speed: 210 mm/s Throughput: 340 kg/h Drive power: 7.5 kW Voltage / Frequency: 400 V / 50 Hz Feed width: 500 mm Collection volume: 530 l Noise level (idle): approx. 65 dB(A) Weight: 905 kg Colour: Anthracite, Iron Grey, Light Grey Media to be shredded: Paper, staples and paper clips, credit cards, CDs/DVDs, USB sticks, crumpled paper, floppy disks, computer files

Condition: used, Year of construction: 1998, machine/vehicle number: 8.2259/355138, This Charmilles Technology wire erosion machine is being auctioned off online as part of our industrial auction / machine auction follow-up auction by J&S GmbH Automotive Technology - Machine Park. You can find this and many other items on our platform. Gkodszyf R Eepfx Aatob

Condition: used, Year of construction: 2013, functionality: fully functional, Type: Automatic sheet-to-sheet laminating machine Manufacturer: Lamina system AB, Sweden Gsdpfx Aasxnzm Eotokb Model: Laminating 1110 FA Year: 2013 Technical Specifications Max. sheet size: Width: 1100 mm Min. sheet size: Width: 200 mm /Length: 350 mm Top sheet: 130 - 450 gm/m2, 1 pts = 28.25 g/m2 Bottom sheet: from 250 gm/m2 Thickness: 0.6 - 10mm (0,016 - 0,39*) Glue: PVA type or as specified Feeder height: Top: 500 mm Bottom: 800 mm Registration accuracy:* < +/- 0.50 mm Operating speed:* Up to 3000 sheets/hour Total installed power: 4.0 kW Electrics: 400 V, 3-Phase, neutral, 50/60 Air requirements: 6 bar; 0.6 MPa or 80 psi Approximately 500 lpm* Oil- and water free air

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1214, product width (max.): 250 mm, working width: 240 mm, product height (max.): 381 mm, sheet thickness aluminum (max.): 2 mm, roll width: 250 mm, roll diameter: 700 mm, year of last overhaul: 2023, type of input current: three-phase, inner diameter: 76 mm, film width: 250 mm, heating capacity: 5 kW (6.80 HP), overall weight: 7,883 kg, operating speed: 2,916 mm/s, total height: 1,970 mm, total length: 7,160 mm, total width: 1,920 mm, The Nilpeter FA2500 is a well-known narrow web flexographic printing press designed for high-quality label and flexible packaging production. Nilpeter is a globally recognized manufacturer with a long history of innovation in flexo printing technology, supplying reliable and efficient presses to converters worldwide. The FA series is particularly valued for its robust construction, printing accuracy, and versatility across a wide range of substrates. This Nilpeter FA2500 label press is configured with 8 colour flexographic printing units, allowing for complex and high-quality print jobs. With a maximum web width of 260 mm, the machine is well suited for label production where precision and consistent print quality are essential. Flexographic printing is widely used in the label industry due to its efficiency, fast setup times, and ability to print on various materials. The press is equipped with electric and UV drying systems, supporting efficient ink curing and stable production speeds. UV drying is commonly used for achieving excellent print quality and durability, especially for demanding label applications. The combination of drying technologies provides flexibility in ink choices and production requirements. Gsdpjyf E Tfjfx Aatekb Additionally, this FA2500 includes 3 die cutting units, enabling inline converting and finishing. Die cutting is an important feature for label production, allowing printed material to be finished directly on the press, improving workflow efficiency and reducing the need for additional offline equipment. Overall, the Nilpeter FA2500 is a proven flexo label printing press, suitable for converters looking for a reliable solution for high-quality label production within the narrow web segment.

Condition: excellent (used), Year of construction: 2010, Raimann KM 310M with movable blade Gkodpfx Aaezv E D Deteb

Condition: used, mileage: 1,53,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially with the fire department and then with the municipal depot. This vehicle has a civilian truck registration as a "closed-body truck" and the papers indicate a total of 9 seats. The vehicle was initially used as a multipurpose vehicle (MZF), and later the municipality's lawnmower was transported in it. Only one bench seat is permanently installed. Two of the three bench seats were not needed in recent years and are included as loose items. The seatbelts and mounting screws are also included in their original condition. A folding table with a radio headset is still mounted on the left side, and an original large fire department first-aid kit is integrated into the interior. Engine: OM 602, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and initially runs smoothly, but after approximately 20 seconds of idling, the idling performance deteriorates significantly, and smoke starts to appear. When the engine reaches operating temperature, the smoke decreases, and the engine runs smoothly again, almost normally. The engine is either severely worn or has an engine malfunction. No precise diagnosis has been made yet. The vehicle starts immediately and functions well, and the usual engine power was fully available during a short test drive, but we do not guarantee its drivability. A repair is certainly necessary in the short term! For driving short distances or loading onto a RORO ship in the port heading to Africa, this 310 D appears to function without any problems. Gkedpjyx N Hqjfx Aatob 5-speed manual transmission. 127 km/h. Ball-type trailer hitch with a 2000 kg braked or 750 kg unbraked towing capacity. Power steering. Original Mercedes/Eberspächer auxiliary heater (operational). Body with individual rust spots; overall, it is still relatively well-preserved due to being stored in a garage for many years. The window of the passenger door is damaged and covered with a film. The paintwork has been repaired in black around the lower part of the vehicle. Apparently, the car was always very well maintained at the fire department, but unfortunately not afterwards! The running board on the sliding door – which is still visible in the photos – has been removed for use on another vehicle and is no longer present. Unladen weight: 2370 kg. Permissible total weight: 3200 kg. Overall vehicle dimensions: Length 5345 mm / Width 1975 mm / Height 2680 mm. The tires (205R14C) are from 2013 and are not porous, with approximately 50-60% tread depth. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unaltered base for restoration. The TÜV (technical inspection) expired in 12/2025 and will not be renewed. We have deliberately kept the purchase price attractive, as comparable vehicles in good condition are now usually sold for twice the price or even higher. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for commercial businesses, freelancers, and emergency services of all kinds. Unfortunately, sales to private end consumers are generally excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT (according to §25a UStG / differential taxation).

Condition: used, machine/vehicle number: 7033, Year of construction: 1984, operating hours: 21,102 h, 20.000 kg Antrieb. Diesel 4x4 max. Traglast. 20.000 kg bei 3 m, 1.700 kg Traglast bei max. Ausladung 18 m, Gesamtmasse des Kranes 22.400 kg, Transportabmessungen 10,86 m x 2,50 x 4,0 m Drehbereich 360°, Radformel 4x4, Hydraulische Federung Hubraum 6086 cm³, Leistung. 89 kW (121 PS) bei 2500 U/min Motor. 6-Zylinder Deutz Dieselmotor, wassergekühlt Getriebe. 4- Stufen- Automatik- Getriebe Bereifung. 385/95R 24, Profil vorn 21 mm, hinten 18mm ID 7033 Nähere Daten und weitere Bilder gern auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben. Traglast. 20.000 kg Antrieb. Diesel 4x4 max. Traglast. 20.000 kg bei 3 m, 1.700 kg Traglast bei max. Ausladung 18 m, Gesamtmasse des Kranes 22.400 kg, Transportabmessungen 10,86 m x 2,50 x 4,0 m Gsdpfxjzcbmij Aatokb Drehbereich 360°, Radformel 4x4, Hydraulische Federung Hubraum 6086 cm³, Leistung. 89 kW (121 PS) bei 2500 U/min Motor. 6-Zylinder Deutz Dieselmotor, wassergekühlt Getriebe. 4- Stufen- Automatik- Getriebe Bereifung. 385/95R 24, Profil vorn 21 mm, hinten 18mm ID 7033 Nähere Daten und weitere Bilder gern auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben.

Year of construction: 2023, operating hours: 2,980 h, condition: used, machine/vehicle number: 140497, Fiber laser cutting system for large-format sheets, frame construction, sheet size up to 4,065 x 2,025 mm, travel ranges: x: 4,200 mm, y: 2,070 mm, z: 130 mm, powerful IPG laser source with 10 kW power, highly developed cutting head with automatic adjustment of the focus position, automatic pallet changer system, integrated control and drive system, Touch-L control with a 19" flat screen, scrap conveyor with collection container, large-format automation type FL for loading and unloading pallets for formats up to 4,000 x 2,000 mm in 2 levels, including Thermotec cooling unit and Camfil filter unit. Gedszqzb Uopfx Aatekb

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² Gjdpfxozuyp Ee Aatokb - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: used, Year of construction: 2010, - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Single-sided edge banding machine Manufacturer: Homag Type: KAL 310/7/A3 Year of manufacture: 2010 Technical data - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Edge trimming unit with 2 motors, each 3KW, 150 Hz, 9,000 RPM. Pneumatically controlled for pre-trimming PU gluing unit 34 with PU hot melt unit - capacity max. 6 kg/h Container size 2 kg. QA glue application unit Selectable edges from the ISAS 28-position edge magazine 4 pressure rollers Release agent spray unit, top and bottom Trimming unit WK 13, bevel / straight With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Electropneumatic adjustment of the trimming motors to 2 positions (flush trimming and with overhang) Pre-trimming unit with 2 motors, each 0.55 KW, 200 Hz, 12,000 RPM. With double-roller scanning. With electropneumatic adjustment Shaping trimming unit FK 11 - manual For processing the edge overhangs on the top and bottom edges of the workpiece, as well as for milling the front and rear edges Gkedpfx Aozuyhhsatob With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Universal trimming unit UF 11 With motor 4 KW, 150 Hz, 9,000 RPM. Swiveling 90°, electropneumatically controlled With HSK 63 F collet for unlocking by push-button Profile scraping unit PN 10 Pneumatic adjustment for moving sideways out of the working area Finishing unit FA11 top/bottom Consisting of: Glue joint scraping blade Cleaning agent application Buffing unit with 2 motors, height adjustment with the upper pressure Machine control via 19-inch touchscreen Return system BOOMERANG ZHR05 With air cushion table, angled, length 2,000 mm, width 1,000 mm Conveyor belt width 1,100 mm Workpiece parameters: Length 300 - 2,500 mm / Width: 60 - 1,100 mm or Length 300 - 800 mm / Width: 1,100 - 2,000 mm Thickness 8 - 60 mm For 4-sided processing: Min. part size: 300 x 300 mm / max. part size 2,000 x 800 mm With roller strip for supporting wider parts.

Condition: good (used), functionality: fully functional, Offered is a Kobe K-310 bone saw in good condition. The machine is fully functional and the bearing on the upper wheel has been replaced. New saw blade installed. Gjdpfjyh H Rbox Aatjkb Saw table dimensions: width 57 cm, depth 78 cm Max. cutting height approx. 35 cm Immediately ready for use, see photos. Further details on request. Payment in cash or in advance. Sale to commercial customers only, no warranty or liability.

Condition: used, Year of construction: 1998, functionality: fully functional, Laminating machine LAMINA 1114 FA. Manufactured in SWEDEN; year: 1998 Max format: 1400×1100 mm Min format: 200×350 mm Top sheet: 130–450 g/m2 Bottom sheet: from 250 g/m2 Material thickness: 0.6–10 mm Feeder height: 500 mm (bottom), 300 mm (top) Production depending on material: up to 1,500 sheets/hour The machine has been dismantled. At the time of disassembly, it was operational. Gedsy Ryhvopfx Aatskb

Condition: used, functionality: fully functional, Raimann KS 310 multi-blade saw Track width: 340 mm Cutting width: 310 mm Cutting height: 110 mm Godpeztztpofx Aatokb Spindle diameter: 65 mm Bushing diameter: 80 mm Blade size: 250-360 mm Feed rate: 4-48 m/min Main motor power: 37 kW Material receiver with side discharge Material return to the operator

Condition: used, functionality: fully functional, machine/vehicle number: 2117, mileage: 5,31,000 km, power: 228 kW (309.99 HP), first registration: 11/2004, fuel type: diesel, overall weight: 26,000 kg, tire size: 315/70/22.5, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel-air, loading space length: 6,300 mm, Year of construction: 2004, Equipment: ABS, EBS, additional headlights, air conditioning, car registration, cruise control, differential lock, electric window regulation, electronic stability program (ESP), hydraulics, low noise, non-smoking vehicle, onboard computer, power assisted steering, power mirror, seat heater, tachograph, traction control, trailer coupling, truck registration, LX cab, flat and short, 6x2 chassis, complete PTO for hydraulics, last axle hydraulically forced steered and liftable, front axle with leaf springs, rear axles air suspended, old tachograph, MAN 6-cylinder engine, ZF AS Tronic automatic transmission, German vehicle. Sale only to commercial customers and under exclusion of any warranty. Gkjdpswip S Usfx Aatob We deliver to any German seaport.