Used Finn Power (Prima Power) Punching Press for sale (45,652)

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 10,740 h, machine/vehicle number: 1951 F 262, laser power: 4,000 W, travel distance X-axis: 4,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,020 mm, swivel angle B-axis (min.): -135 °, swivel angle B-axis (max.): 135 °, TECHNICAL DETAILS Linear axis travel paths (XYZ): 4,500 x 2,500 x 1,020 mm Rotary axis travel paths: A-axis ± 360º continuous, B-axis ± 135º C-axis: ± 10 mm Max. speed of linear axes (XYZ): 50 m/min Combined speed of linear axes: 85 m/min Max. speed of rotary axes A, B: 540 °/s Acceleration of rotary axes A, B: 60 rad/s² Laser type: CV4000 Laser Installed laser source power: 4,000 W MACHINE DETAILS Operating hours: 10,740 h Power supply: 400 V, three-phase, 50 Hz Installed cooling unit power: 53 kW / 58 kVA Extraction and dust collection system power: 15 kW / 18 kVA EQUIPMENT - OPTIMO machine - CNC control panel: P30L S/N 15/40 - 0083-01 - Prima Power remote control, serial number: 14/06 00489 - Hyfra Sigma 52-S cooling system - Donaldson DFPRO12 extraction and dust collection system - Donaldson MD2 micro-dosing system The machine is powered, however, air and gas supply are required. These are not available on site. Dismantling and loading can be arranged by a company for approx. €22,000. Iodpfx Aexd Um Rjn Doia

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, punching force: 1,000 t, operating speed: 93 mm/s, stroke length: 55 mm, table length: 1,100 mm, table width: 800 mm, machine/vehicle number: 100597, TECHNICAL DETAILS Press force: 10,000 kN Table surface (W x D): 1,100 x 800 mm Stroke range: 15 - 55 mm Clearance at max. stroke: 28 - 98 mm Puzzle thickness: up to 3 mm Format width (max.): 1,100 mm Punching speeds Upwards: 47.8 mm/s Downwards: 93.7 mm/s Punching: 0.28 mm/s Hydraulic unit Type: 250 Dimensions (L x W): 1,310 x 910 mm Oil capacity: 670 l Unit weight: 1,000 kg Oil weight: approx. 550 kg Weight with oil fill: approx. 1,550 kg Automatic punching table Type: 355 Table top size (W x D x thickness): 1,000 x 700 x 10 mm Hardness: 62 HRC Surface finish: 7 MACHINE DETAILS Electrics Operating voltage: 400 V Frequency: 50 Hz Rated machine current: 50 A Incoming line protection: 63 A Control voltage: 230/24 V Rated power: approx. 30 kW Protection class: IP 54 Power requirement: approx. 8 kW Pneumatics Operating pressure: 6 bar Dimensions & Weight Puzzle disassembler dimensions (L x W x H): 3,150 x 1,620 x 2,900 mm Working height: approx. 1,700 mm Total weight: 33,000 kg Ijdey Ampdopfx An Dsia Weight of puzzle disassembler: approx. 1.8 t Noise level: < 70 dB(A)

Year of construction: 2026, condition: new, Bosporas Machinery is a manufacturer of coil processing, press feeding and metal forming systems, delivering high-performance and customized industrial solutions worldwide. Our press solutions are designed for punching, perforating, embossing and sheet metal forming applications. Depending on production requirements, we offer advanced servo punch press systems for flexible programmable production and high-speed mechanical presses for continuous mass production. These machines can be supplied as standalone units or integrated into complete coil-fed automatic production lines. ⚙️ AVAILABLE PRESS SOLUTIONS 🔹 SERVO PUNCH PRESS The Servo Punch Press is designed for precision, flexibility and intelligent production control. Key Features: 40 Ton punching capacity 6 tool stations for multi-tool operation Dual-servo controlled X-Y punching system Punching at programmable coordinates 22 kW hydraulic punching drive Up to 90 strokes per minute Automatic scrap conveyor system Advantages: High precision punching performance Programmable motion profiles Lower noise and reduced maintenance Energy efficient operation Fast setup for different part designs 🔹 PERFORATION HIGH SPEED MECHANICAL PRESS The High-Speed Mechanical Press is ideal for continuous perforation, embossing and repetitive punching operations in mass production environments. Suitable For: Sheet metal punching Perforating Embossing Tool & die applications High-volume production lines Advantages: High production speed Stable continuous operation Reliable mechanical drive system Ideal for repetitive operations Cost-effective mass production solution 🔧 ENGINEERING FEATURES Robust industrial machine construction PLC & HMI control systems Easy integration with feeders and automation lines Tooling flexibility based on product design Long service life and low maintenance structure ⚡ OPERATIONAL ADVANTAGES Two technologies for different production needs Flexible solutions from custom parts to mass production Standalone or turnkey line integration Improved efficiency and reduced downtime Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Sheet metal manufacturing Perforated panel production Electrical cabinets HVAC products Construction components Automotive parts White goods industry 🧩 OPTIONAL CONFIGURATIONS Coil feeding integration Decoiler & feeder systems Custom dies and tooling Conveyor systems Iisdpfx Ansy Anr Ts Dja Automation upgrades Turnkey production solutions 📸 REFERENCE PROJECTS Images and videos can be shared showing different press systems successfully operating in various industrial applications. Additional references and technical details are available upon request.

Condition: good (used), Year of construction: 2000, Punching Press Manufacturer: EHT Type: Strippit 1500/30 Iiedpsul S Eaofx An Dea Year of manufacture: 2000 CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Max. material thickness: 8 mm Punching force: 30 tons Turret with 46 tool stations, including 4 D-size index stations 3 programmable clamps Metal table Used exclusively in single-shift operation Including WILSON TOOL tooling 16426ä

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 44,973 h, laser power: 2,700 W, punching force: 22 t, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Description X working range max.: 2585mm Y Working range max.: 1280mm Iisdpfx Aotpguzen Dea Control: Siemens Sinumerik 840 D Laser power: 2700 Watt Laser beam on: 6054 hours Laser on: 29826 hours Operating hours: 44973 hrs. Standard equipment: - Sturdy C frame - Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored 500x500mm parts chutes for punching and laser station, ejection cylinder on laser chute - Laser unit: High-frequency excited CO2 laser TLF 2700W, vibration-insulated, integrated in machine frame, incl. cooling unit and DIAS 3 laser controller - HI-Las high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5'' lens, quick-change device, distance control - Sinumerik 840D control system, 10.4'' TFT color screen, simple operation, online help, diagnostic functions, maintenance logbook, technology data, job tables, Teleserice, 3.5'' floppy disk drive, RJ45 network connection Safety: Multi-beam light barriers, quick shut-off hydraulics, suction and compact dust extractor, protective device against stray radiation on the cutting head + TLF 2700 laser + Thread forming function + MultiTool function + Signing / fast beading function + MultiBend function + Rolling technology function + Repositioning cylinder + bulge detection + Chip conveyor automation + Sheetmaster + Gripmaster + Trumasort R4

Condition: like new (used), Good parts conveyor belts for TruMatic 7000 / 6000 Very good condition Iijdpfxeu S Ny Tj An Doa

Condition: used, Year of construction: 1987, Mechanical high-performance stamping press for industrial serial production of stamped and formed parts. Manufacturer: Müller Weingarten AG Type: HU2-315.25 Year of manufacture: 1987 Press force: 3150 kN Stroke: 300 mm Slide adjustment: 250 mm Strokes per minute: 15–90 min⁻¹ Machine weight: 100,000 kg Total weight: 107.8 t Individual weight G1: 91 t Individual weight G2: 5.4 t Individual weight G3: 2.4 t Individual weight G4 without coil: 7.5 t Individual weight G5 without coil: 1.5 t Iiodpfx Anoyyccbe Dea Machine motor power: approx. 92 kW Static foundation load: approx. 98.8 t Dynamic load on slide: 240 kN Dynamic load at cutting impact: 160 kN

Condition: used, pressing force: 250 t, Mechanical high-performance stamping press for series production of stamped and formed parts. Manufacturer: Müller Weingarten AG Pressing force: 2500 kN Drive type: mechanical Stroke: 160 mm Strokes per minute: 20–80 min⁻¹ Table size: 1000 x 1600 mm Strip width: 30–500 mm Max. coil diameter: 1800 mm Parts produced per day: 43,000 Number of parts: 50 Number of progressive dies: 50 Tool change time: 30 min Shift occupancy: 4 Total weight: 64 t Single weight G1: 48.5 t Single weight G2: 5.2 t Single weight G3: 2.3 t Single weight G4 without coil: 6.5 t Single weight G5 without coil: 1.5 t Machine motor power: approx. 77 kW Total connected load of system: approx. 183 kW Iiodpfxoyyb U Ao An Dea Static foundation load: approx. 62 t Dynamic ram load: 85 kN Dynamic cutting impact: 125 kN

Condition: new, pressure 55 t hole diameter in sheet thickness Ø 40 in 10 mm throat 500 mm stroke 60 mm 38 /min. engine output 5 kW 20x20 mm 28x11 mm Overall size 1500x1100x2000 mm Iisdjyv Nxhepfx An Dea weight of the machine ca. 1.150 kg Accessories / equipment: - punching table

Condition: used, Repair-needing Single-Column Eccentric Press CHINA Type JB23-16 Machine no. 1711BL16D11-17 Year of manufacture: 2017 Press force: 16 tons Throat depth: 160 mm Table size: 480 x 320 mm, with 18 mm T-slots Ram surface: 175 x 130 mm Table through-hole: Ø 125 mm Ram stroke: 60 mm Ram adjustment travel: 40 mm Max. installation height: 330 mm Clamping pin bore: Ø 35 mm Ram strokes: 130 strokes/min Motor power: 2.2 kW Drive power: 380 Volt, 50 Hz - Mechanical rotary wedge clutch - No stroke adjustment Required space (L x W x H): 1300 x 900 x 1850 mm Weight: 790 kg Mechanically in need of repair, clutch makes loud knocking noise. Iedpfxeyxrhws An Doia Release mechanism requires reworking. We are clearing space Priced to sell – ideal for export.

Condition: new, Year of construction: 2025, Sliding clip formers are used to produce fixation sliding clips for double standing seam roofing panels. Before installation roofing panels have to be made using roll former roofing machines. After finishing of panels production and preparing roofing works panels can be installed on roofing place with special fixation clips. Those clips, depending on design, could be fixed or sliding ones. Fixed clip has simple and cheap design so it can be good for small roofs that doesn’t have long length panels. Sliding clip are good for big roofs with different designs and long-length panels. Sliding clips can move and self-find perfect position so not be damaged and safe for roof while temperature expansions. We offer punching presses for making both fixed and sliding clips. We make sliding clip formers for 25, 27 or 39mm clip highs For sliding expansion clips productions there have three presses to be used. First sliding clip bottom part press is used for punching bottom part of sliding clip with fixation round holes and connection oval hole. At the same time this press cuts metal strip with necessary length. Blank for clip production is easy to get using manual guillotine or cut-to-length slitting machine. Second sliding clip bottom part bender is used for bending of sliding clip bottom part to 90 degrees angle. So, after this operation bottom part is ready. Third clip former makes top part of sliding clip at the same time forming and bending it. After producing bottom and top part of sliding clip you can easily connect it to one working sliding clip. So using sliding clip formers that we offer you can easily make expansion clip and use it while double standing seam roofing installation without any unnecessary deformations. Maximum metal thickness you can work with -1mm. Iisdpfsqxalxsx An Dsa To get more information about sliding clip former we produce please contact our sales department.

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 - ERF23 - BGR Isdoxwp Nyjpfx An Deia - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: good (used), Year of construction: 1966, Original Heidelberg hot foil stamping unit Iiedpfey Ahmdjx An Doa

Condition: used, Year of construction: 2000, pressure 100 t throat 620 mm stroke 0-100 mm hole diameter in sheet thickness 40 in 20 mm no. of strokes 49 Hub/min Iisdpfsyv Ncysx An Dja total power requirement 15 kW weight of the machine ca. 3.500 kg

Condition: used, Year of construction: 1995, pressure 110 t Ø 40x20 mm 750 no. of strokes 28 Hub/min work height max. 990 mm Machine No. 9557 Iisdjyv N Rqepfx An Doa weight of the machine ca. 3.400 kg dimensions of the machine ca. 2300x1300x2300 mm

Condition: used, Year of construction: 1989, pressure 50 t throat 610 mm Iijdsyv Nvaepfx An Dea total power requirement 7,5 kW machine weight ab. 1700 kg dimensions 1500 x 650 x 1700 mm

Condition: used, pressure 40 t throat 175 mm Iijdpfsyv Nuiex An Dja work height max. 1055 mm stroke 30 mm sheet thickness - max. 8 mm total power requirement 4 kW weight of the machine ca. 1020 kg dimensions 910 x 670 x 1930 mm

Condition: used, Year of construction: 2006, Pressing force 100 t Isdoyv Nrzspfx An Djia diameter 40 mm throat 760 mm total power requirement 8,5 kW weight 3.600 kg Accessories / equipment: - punching table

Year of construction: 2006, condition: excellent (used), Punching capacity in sheets at 37 kg strength up to: 2 and 3 mm Iijdpfx Ajd D Ryfsn Dja with various punching tools

Condition: excellent (used), Year of construction: 2005, Manufacturer: Helmerding Presse Press force: 5,000 kN Stroke adjustment: 97–400 mm Ijdpfxjyz Um Uj An Djia Strokes per minute: 10–80 1/min Tool installation height: 800 mm Ram adjustment: 200 mm Ram area: 3,000 x 1,400 mm Table area: 3,000 x 1,400 mm Motor power: 90 kW Press weight: 120,000 kg Including transfer and coil line.

Condition: excellent (used), Year of construction: 1999, Manufacturer: Müller Weingarten Press Type: HUQ 630.40 Pressing force: 6,300 kN Iodpfx Asyz Shven Dsia Table area: 4,000 x 1,600 mm Ram area: 4,000 x 1,600 mm Ram stroke: 124-400 mm Ram adjustment: 200 mm Strokes per minute: 10-60 1/min Tool change system: tool change cart Including transfer and ARKU strip feeding line

Condition: used, Year of construction: 2001, SanGiacomo Press Model: T250 DM Pressing force: 2,500 kN Stroke adjustment: 21 - 230 mm Ram adjustment: 120 mm Isdpfx Aeyz Shpsn Doia Stroke rate: up to 75 strokes/min Ram surface: 2,300 x 1,090 mm Table surface: 2,300 x 1,090 mm Dimensions: 3,550 x 1,910 x 5,200 mm (LxWxH) Machine weight: 42,000 kg

Condition: used, Punching Machine MUHR & BENDER - MUBEA Type KL 350 / 203 Machine No. Year of manufacture 19 Punching force 35 tons Iodpsyvvkwsfx An Doia Throat depth 203 mm Ram stroke 22 mm Capacity Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate 117 x 70 mm Table plate 175 x 100 mm, thickness 100 mm Drop-through opening in table cutout Ø 56 mm Stroke release Single stroke via foot switch Motor power 1.5 kW Power supply 400 Volt, 50 Hz - Electric foot switch for stroke release - Manual lever positioning device for punch movement - Equipped with a Ø 8 mm punching tool - Support tables approx. 270 x 230 mm each on left and right of punching unit - Metal base frame Space requirement L x W x H 750 x 720 x 1500 mm Weight 430 kg In very good condition

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Iodpfx Aox U Eiaon Djia Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: excellent (used), Year of construction: 2002, Manufacturer: ARISA Type: S-2-630-350-FS Pressing force: 6,300 kN Table size: 3,500 x 1,450 mm Ram size: 3,500 x 1,400 mm Stroke adjustment: 25–300 mm Installation height: 700 mm Ram adjustment: 300 mm Strokes per minute: 20–70 Control system: SIEMENS S7 Iiodpsyx S Iwsfx An Dea Including DIMECO coil line