Used Fliegl Sds 380 Für 20" Container Heckbündig for sale (38,880)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,200 kg, maximum load weight: 27,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis, Saddle, and Haulage Company Fine-grained steel welded construction in lightweight design, saddle plate with interchangeable 2 kingpins, main frame reinforcement for 25 tons, with center of gravity at 3 m load length in the retracted state. 13 pairs of hooks for securing lashing straps, welded onto the crossbeams 23 pairs of lashing eyes recessed into the outer frame, each 3.5 tons Outer frame with Load-Lock profile for attaching lashing straps Note! Not usable with sideboards! 24 tons, 2-speed support winch in reinforced design for loaded coupling/uncoupling, single-sided operation Chocks with holder Aluminum side impact protection Under-run protection Half-shell fenders with anti-splash flaps according to EC 1 spare wheel holder for 1 tire, with wheel fastening kit 1 closed storage box for stakes, open at the top, below the loading area, doors on both sides, w=450 mm/h=400/420 mm/d=2460 mm 6 pairs of pull-out stake pockets, for rectangular section stakes 80x80 mm, extendable from loading width of 2000 mm to 3100 mm 4 pairs of stake pockets recessed into the outer frame, for rectangular section stakes 80x80 mm 11 stake pockets recessed in the center of the floor, for rectangular section stakes 80x80 mm, with reinforcement beam, installed between the outer stake pockets 5 x 3 pairs of stake pockets recessed into the outer longitudinal beams, for rectangular section stakes 80x80 mm, including reinforcement beams - for load securing to the front and rear during the transport of reinforcing steel mats, 2x5000 mm or 2x 6000 mm 6 lightweight plug-in stakes, w=80/d=80/, usable height approx. 1850 mm, hot-dip galvanized, with rope guide at the top for strap tensioning 12 lightweight plug-in stakes, w=80/d=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded to the bottom on both sides Note: Stake pockets/plug-in stakes are not designed for the sole securing of long materials, pipes, etc. without strapping. Lrsdpfx Aoi Ri Szskmeu 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 6 steel winches with wire rope and clevis hook, with rope guide through the outer frame, 1 removable gearhead for steel winch - supplied loose Telescoping Main frame telescoping extendable by a maximum of 4,000 mm and lockable every approx. 500 mm Locking with pneumatic pin locking + indicator for frame locking on both sides, operated via hand knob, operation for brake/locking and suspension on the control panel on the left side in front of the axles Storage compartment between the longitudinal beams in the extended state Axles + Suspension SAF disc brake axles with 430 mm disc diameter Last axle with trailing arm, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand knob, as well as manually via switch in the towing vehicle (Pin 10), without truck installation. Axle track offset mm Air suspension 1st axle automatic lift axle, additionally electrically operable from the truck, with starting aid Braking System 2-line compressed air braking system Colored line routing for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front EBS manufacturer according to the manufacturer's choice, electronic braking system with EBS

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, container length: 20 ft, color: blue, empty load weight: 29,000 kg, loading space width: 2,550 mm, loading space length: 6,000 mm, No. 8 - 20 ft FLAT CONTAINER with 3 recessed coil pockets, dimensions 6.050 m length x 2.550 m width Lrsdpjx Akrtjfx Akmsu Internal anchor hooks and collars, 3 recessed sections for coil storage, Supports for pillars inside the coil pockets, Front and rear drop-down folding sides with folding mechanism, Fittings for intermodal transport Year: 2012

Condition: used, axle configuration: 3 axles, first registration: 10/2005, color: other, Year of construction: 2005 Empty weight: 3.750 kg Ljdpfxsucxu Ij Akmjru Axle 1: left 12 mm right 7 mm Axle 2: left 4 mm right 6 mm Axle 3: left 10 mm right 10 mm We have the possibility to stack trailers!

Condition: ready for operation (used), functionality: fully functional, Angeboten zum Kauf werden in dieser Anzeige d i v e r s e Tankcontainer zur Abholung "frei aufgesetzt ab Depot" EXTRASERVICES – Ganz persönlich und individuell für Sie! Auf Wunsch... ✓ unterbreiten wir Ihnen gern ein maßgeschneidertes Angebot ✓ liefern wir Ihnen Container schnell und unkompliziert bundes- und sogar weltweit ✓ bauen wir Ihnen Container fachgerecht um ✓ vermieten wir Ihnen Container genau dort, wo sie sie benötigen ✓ kaufen wir Ihre nicht mehr benötigten Container Lsdpfx Aowut Rfekmsru Sonstiges: • Maße & Gewichte erhalten Sie gern auf Anfrage • Gültig solange der Vorrat reicht • Preis versteht sich zzgl. gesetzl. Mwst. (ausweisbar) Für weitere Fragen oder eine Beratung rufen Sie uns gerne an.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Year of construction: 2026, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Lrodozlkgcepfx Akmou Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2007, total length: 12,080 mm, total width: 2,500 mm, wheelbase: 9,600 mm, color: silver, Equipment: ABS, General information Year of construction: 2007 Registration number: OK-65-YT Ljdpe Aa A Ncsfx Akmoru Axle configuration Make axles: BPW Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 5.360 kg Carrying capacity: 33.640 kg GVW: 39.000 kg Condition Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - Extandable - Twist-locks = Remarks = Fliegl SDS 390 / 40-45FT / 1x Extendable / BPW + Disc

Condition: used, axle configuration: 3 axles, first registration: 08/1995, color: other, Year of construction: 1995 Empty weight: 5.600 kg Lrodszw Evpepfx Akmou Axle 1: left 3 mm right 5 mm Axle 2: left 4 mm right 4 mm Axle 3: left 5 mm right 5 mm We have the possibility to stack trailers!

Condition: used, functionality: fully functional, overall weight: 2,100 kg, total length: 6,000 mm, total height: 2,400 mm, USED storage containers/sea containers, 6m long (20-foot) READY FOR USE, windproof and waterproof With valid CSC plate Wooden floor We offer you… Delivery including unloading possible for an extra charge a customized offer Desired paint finish Modification of the container according to your exact requirements All offered containers are in stock Other: • Dimensions & weights available upon request Lodezh Rb Eepfx Akmsru PLEASE CONTACT US

Condition: excellent (used), Year of construction: 2020, KRAUSSMAFFEI KM 201-380 PX electric injection molding machine Year of manufacture: 2020 Operating hours: 21,849 h Clamping force: 2,000 kN (200 tons) Control system: MC6 Drive system: servo-electric with servo-hydraulic components Machine characteristics • Five-point, double toggle mechanism for the clamping unit, three-platen design. • Servo-electric drive for the clamping unit. • Servo-electric drive for injection and plasticizing. • Servo-hydraulic drive for the injection unit movement. • MC6 control system based on an industrial computer with real-time Ethernet communication. • Plasticizing unit for thermoplastics with a 40 mm diameter screw. Clamping unit Parameter Value Clamping force 2,000 kN (200 t) Mold opening force 300 kN Mounting plate dimensions (H × V) 870 × 820 mm Distance between columns (H × V) 635 × 585 mm Mold opening stroke 500 mm Minimum mold height 250 mm Maximum mold height 550 mm Maximum plate clearance 1,050 mm Ejector stroke 200 mm Ejector force forward / backward 39 / 19 kN Ejector speed 350 mm/s Injection unit Parameter Value Screw diameter 40 mm L/D ratio 20:1 Maximum injection pressure 1,860 bar Injection volume 201 cm³ Injection shot weight 183 g Injection speed 125 mm/s Injection rate 157 cm³/s Maximum screw speed 334 rpm Plasticizing rate 24.7 g/s Screw torque 337 Nm Nozzle clamping force 34 kN Nozzle radius 10 mm Nozzle orifice diameter 4 mm Electrical and hydraulic parameters Parameter Value Connected load 13.8 kW Electrical protection 63 A Installed heater power 11.5 kW Number of cylinder heating zones 5 Dry cycle time according to EUROMAP 6 2.0 s / 445 mm Oil tank capacity 200 l Weight and dimensions Parameter Value Net weight with control cabinet 14,300 kg Machine length 6,120 mm Machine width 2,170 mm Lrodpfxjz Sznce Akmsu Machine height 2,210 mm

Condition: used, axle configuration: 3 axles, first registration: 08/2007, color: other, Year of construction: 2007 Empty weight: 5.500 kg Axle 1: left 4 mm right 4 mm Axle 2: left 6 mm right 6 mm Lodpfxjza T Uye Akmeru Axle 3: left 4 mm right 4 mm We have the possibility to stack trailers!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,800 kg, maximum load weight: 15,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,300 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Turntable Drawbar Trailer for Roll-Off Containers * High-tensile steel welded chassis construction * Sliding frame system: * The container is loaded from the rear onto the sliding frame and pushed forward * Front container stop adjustable for 6.0 m, 6.5 m and 7.0 m roll-off containers with external rollers * Container locking system: * 2 pairs of recessed locking hooks integrated into the floor * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Designed for the transport of roll-off containers with subframe according to DIN 30722 * Heavy-duty turntable with ball-bearing slewing ring * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Semi-circular mudguards * Rear impact protection, mounted vertically on left and right side, with delta rubber buffers on underrun protection brackets * Spare wheel carrier for 1 spare wheel, including wheel mounting kit * Plastic toolbox with drawer and shelf insert, dimensions: 650 x 520 x 670 mm (W x H x D), lockable with padlock ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * SAF disc brake axles * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Air suspension with raise-and-lower valve ### Wheels & Tyres * 385/55 R 22.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Drive-away protection: opening the container locking system automatically activates the spring-loaded parking brake * Vehicle Stability Control System * Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle * EBS (Electronic Braking System) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system Lsdpfx Akezggghomjru * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 2 additional LED work lights at the rear, activated via reverse gear * 2 x 7-pin non-interchangeable front plugs with connecting cable ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Paint Finish * Chassis: hot-dip galvanised or painted according to customer requirements * Drawbar: black KTL coating (cathodic dip coating) Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 11,000 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,480 mm, loading space height: 3,040 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 4,020 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Lredpoi Riw Ajfx Akmju Chassis Steel welded construction with narrow crossmember spacing and reinforced design, low-loader outer frame profile, for transporting construction machinery up to 32,000 kg and with a maximum outer width of the construction machinery of 2550 mm, kingpin plate with replaceable 2 kingpins. Rear slope of approx. 1200 mm and 7°. Ramp shaft closed at the top with steel/diamond plate, in the low-bed, omega rail laterally at the bottom on the outer frame as a mounting rail for tarpaulin and spacers for lashing points, not in the wheel area. If a lift table is used, there is an additional, lightweight outer frame with an omega profile. 24-ton, 2-speed landing gear, single-sided operation, with a semi-circular lower part and a straight connection plate, with stroke compensation, free swivel radius to the rear approx.: 1950 mm, rear support, foldable 2 wheel chocks + holder Side underrun protection, aluminum Quarter panel fenders in front of and behind each axle with anti-splash flaps behind each axle Underrun protection, steel Splash flap at the rear over the entire width 4 storage boxes, stainless steel, w=800/h=350/d=350 mm, with a polished, lockable door, 2 x on the left front and 2 x on the right front in front of the 1st axle Lift table behind the gooseneck, approx. 3000 mm long, hydraulically liftable for crossing over the gooseneck, with mechanical locking in the raised position. (Cylinder angled for good ground clearance, Fliegl standard). Operation on the right front + additional activation with a wireless remote control, lift table can be raised with the tarpaulin closed! Tarpaulin attachment in the lift table area to an additional, lightweight outer frame with omega profile, lift table can be raised with the tarpaulin closed! Lashing points can also be used in the lowered position! Lashing points Gooseneck: 4 pairs of 5-ton lashing points embedded in the outer frame 2 pairs of lashing points at the top and on the side embedded in the outer frame 8 pairs of lashing points at the top and on the side embedded in the outer frame, each 10 tons 9 pairs of 5-ton lashing points embedded in the outer frame Axles + Suspension SAF drum brake axles last axle with trailing steering knuckle, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension with lifting and lowering valve + auto-reset function H&S function with quick vent 1st axle, automatic lift axle, incl. forced lowering and starting assist, activated by pressing the brake pedal 3 times (starting assist is functional up to an axle load exceedance of 30% and a speed of max. 25 km/h) Axle lift below the recommended ride height, no guarantee for tire damage Wheels and tires 235/75R17.5 from leading manufacturers Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system Spring brake parking brake 2 foolproof coupling heads at the front EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Axle load recognition in the truck via EBS, without installation in the truck. Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white

Condition: used, maximum load weight: 28,745 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2021, Equipment: ABS, Fliegl SDS 390 Flatbed Trailer 3-axle, air suspension with a lift axle, SAF axles, ABS. Ledpfe Abflcjx Akmeru Tires: 435/50R19.5

Condition: used, maximum load weight: 28,745 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2021, Equipment: ABS, Fliegl SDS 390 Flatbed Trailer 3-axle, air suspension with a lift axle, SAF axles, ABS. Lrsdpfxe Abfk Eo Akmou Tires: 435/50R19.5

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2014, loading space length: 13,660 mm, loading space width: 2,470 mm, loading space height: 2,810 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 50 %, wheelbase: 9,000 mm, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes - Lift Axle = More information = General information Lredjz Sna Iopfx Akmsu Year of construction: 2014 Registration number: ON-68-FS Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 3: Max. axle load: 9000 kg; Tyre profile: 40% Weights Empty weight: 5.880 kg Carrying capacity: 33.120 kg GVW: 39.000 kg Maintenance APK (MOT): tested until 03/2027

Condition: good (used), Containers, transport containers, steel containers, ISO containers, material containers, workshop containers, shipping containers -Steel container: Workshop container / material container with lighting and workshop equipment -Workbench: with vise -Double grinding machine: -Electrical equipment: see photos -Container interior dimensions: 5940/2330/H2285 mm Lrodpszh Eg Nsfx Akmou -Transport dimensions: 6050/2420/H2590 mm -Transport weight: 2800 kg

Condition: used, functionality: fully functional, overall weight: 2,100 kg, total length: 6,000 mm, total height: 2,400 mm, USED storage container/sea container 6m long (20ft) OPERATIONAL, wind and watertight With valid CSC sticker Wooden floor We offer you... Delivery including unloading available for an additional charge A customized offer Customized paint finish Ljdpfergprwex Akmsru Conversion of the container exactly according to your wishes All offered containers are in stock Other: • Dimensions and weights are available upon request PLEASE CONTACT US

Condition: used, functionality: fully functional, 20ft Hard Top Container – Robust, flexible, and versatile, available from the Hamburg depot. We are offering a high-quality 20ft Hard Top Container, ideal for the transport and storage of heavy, bulky, or oversized goods. Thanks to the removable steel hard top, the container can be easily loaded from above – for example, using a crane. The robust steel construction ensures maximum stability and reliably protects your cargo from the elements and damage. Advantages at a glance: 20 ft Hard Top Container Removable steel roof for easy top loading Robust and durable steel construction Weatherproof and securely lockable Ideal for transport, storage, and use on construction sites Lredpfxszh I U As Akmeu Suitable for machinery, equipment, bulk goods, and oversized loads Whether for industry, construction, logistics, or private projects – this Hard Top Container offers maximum flexibility and a reliable solution for demanding applications. If you are interested or have any questions, please do not hesitate to contact us.

Condition: excellent (used), Auxiliary heater Buderus 2500 kW. Oil + gas. Housed in 20-foot sea container. Ledox U Eyfepfx Akmsru

Condition: used, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 20' container with glass windows - 2x available Built by the company Baumann Container The price is per unit. 20' container with glass windows - 2x available Built at company Baumann Container The price is per unit. Internal dimensions mm (LxWxH) 5,898 x 2,352 x 2,390 ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Lodpsubz Emefx Akmeru - .

Condition: excellent (used), axle configuration: 2 axles, first registration: 04/1999, suspension: steel, color: white, 2X AVAILABLE LEAF SPRING SUSPENSION DUAL TIRES = Further information = Year of manufacture: 1999 Axle brand: ROR Suspension: Leaf spring Rear axle 1: Dual tires Rear axle 2: Dual tires Technical condition: very good Optical condition: very good Please contact Thierry Leemans for further information. Lrjdezif Ivepfx Akmju

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,770 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Turntable Drawbar Roll-Off Container Trailer * High-tensile steel welded chassis construction * Two longitudinal beams with cross members * Top surface of the longitudinal beams designed as wear-resistant container roller tracks * Rear loading with integrated loading ramp * Suitable for roll-off containers with lengths of 6.5 m and 7.0 m * Container locking system: * 2 pairs of recessed locking hooks integrated into the chassis * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Designed for transporting roll-off containers with subframe according to DIN 30722 * Heavy-duty turntable with ball-bearing slewing ring * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Semi-circular mudguards * Spare wheel carrier for 1 spare wheel, including wheel mounting kit * Plastic toolbox with drawer and shelf insert, dimensions: 650 x 520 x 670 mm (W x H x D), lockable with padlock ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * SAF disc brake axles with 430 mm brake disc diameter * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Air suspension * Raise-and-lower valve ### Wheels & Tyres * 385/55 R 22.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system Lredoi Ri Nmjpfx Akmsu * Spring-loaded parking brake * Drive-away protection: * Opening the container locking system automatically activates the spring-loaded parking brake * Electronic Stability Program (Vehicle Stability Control System) * Duomatic air coupling * EBS (Electronic Braking System) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white LED front position lights * 2 white/red rear outline marker lights * 1 x 15-pin front connector * 2 additional LED work lights at the rear, activated automatically when reverse gear is engaged ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Surface Protection & Paint Finish * Chassis: hot-dip galvanised including passivation treatment * 15-year warranty against perforation corrosion * Drawbar: black KTL coating (cathodic dip coating) --- Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: used, empty load weight: 5,100 kg, maximum load weight: 32,900 kg, overall weight: 38,000 kg, axle configuration: > 3 axles, first registration: 08/2018, suspension: air, tire size: 385/55 22,5, tire condition: 60 %, color: other, Year of construction: 2018, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69805 Fliegl, SDS01 * Year of manufacture: 2018 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension Ledpfx Akjyib Idemsru * Lift axle * Air line coupling head (red + yellow) * 15-pin connector plug * Raise and lower device * Suspension: Air * Gross weight: 38,000 kg * Unladen weight: 5,100 kg * Payload: 32,900 kg * Permissible gross weight: 38,000 kg * Axle manufacturer: SAF * Tire condition, 1st axle: 70% -- 70% - Tire size: 385/55 R22.5 * Tire condition, 2nd axle: 50% -- 50% - Tire size: 385/55 R22.5 * Tire condition, 3rd axle: 50% -- 50% - Tire size: 385/55 R22.5 * Tire sizes: 385/55 R22.5 * Fliegl container chassis * 40" container platform for timber & metal, manufacturer: S Grabmeier * Unladen weight: 4,600 kg, front wall height: 2,040 mm * 6 pairs of lashing rings for rail transport * Frame height: 500 mm, timber body with 8 pairs of Ecco Steel stanchions on container chassis * Stanchion height: 1,980 mm * Highlight: Lift axle / timber transport / SAF axles Disclaimer: Subject to change, prior sale, and errors excepted. You can find further photos and videos on our website. Our comprehensive service portfolio includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing solutions * Application for all (export) documentation * Ordering of export/temporary customs license plates * Vehicle preparation: new tarpaulins, lettering, repainting, etc. * Professional loading and load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained specialist staff—we will be happy to advise you.

Condition: used, empty load weight: 5,100 kg, maximum load weight: 32,900 kg, overall weight: 38,000 kg, axle configuration: > 3 axles, first registration: 08/2018, suspension: air, tire size: 385/55 22,5, tire condition: 50 %, color: other, Year of construction: 2018, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69803 Fliegl, SDS01 * Year of manufacture: 2018 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension Ljdpfxjyib Iqe Akmeru * Lift axle * Air connection couplings (red and yellow) * 15-pin connector plug * Lifting and lowering mechanism * Suspension: Air * Total weight: 38,000 kg * Unladen weight: 5,100 kg * Payload: 32,900 kg * Permissible total weight: 38,000 kg * Axle manufacturer: SAF * Tyre condition 1st axle: 70% – 70% – Tyre size: 385/55 R22.5 * Tyre condition 2nd axle: 30% – 30% – Tyre size: 385/55 R22.5 * Tyre condition 3rd axle: 50% – 50% – Tyre size: 385/55 R22.5 * Tyre sizes: 385/55 R22.5 * Fliegl container chassis * 40" container platform for timber and metal, manufacturer: S Grabmeier * Unladen weight: 4,600 kg, front wall height: 2,040 mm * 6 pairs of lashing rings for rail transport * Frame height: 500 mm, wooden superstructure with 8 pairs of Ecco Steel stanchions on container chassis * Stanchion height: 1,980 mm * Special features: Lift axle / timber transport / SAF axle Disclaimer: Subject to change, prior sale and errors excepted. More photos and videos can be found on our website. Our comprehensive services include for example: * Purchase / sale / rental of commercial vehicles * Fast, easy financing options * Processing of all (export) documents * Ordering of export plates / customs plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration services * Transfer of commercial vehicles Ask our trained staff, we are happy to advise you.

Condition: used, empty load weight: 5,100 kg, maximum load weight: 32,900 kg, overall weight: 38,000 kg, axle configuration: > 3 axles, first registration: 08/2018, suspension: air, tire size: 385/55 22,5, tire condition: 60 %, color: other, Year of construction: 2018, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69804 Fliegl, SDS01 * Year of manufacture: 2018 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Lift axle * Air connection coupling head (red + yellow) * 15-pin connector plug * Lifting and lowering device * Suspension: Air * Gross weight: 38,000 kg * Unladen weight: 5,100 kg * Payload: 32,900 kg * Permissible total weight: 38,000 kg * Axle manufacturer: SAF * Tire condition, 1st axle: 70% -- 70% - Tire size: 385/55 R22.5 * Tire condition, 2nd axle: 50% -- 50% - Tire size: 385/55 R22.5 * Tire condition, 3rd axle: 50% -- 50% - Tire size: 385/55 R22.5 * Tire sizes: 385/55 R22.5 * Fliegl container chassis * 40" container platform for wood & metal * Manufacturer: S Grabmeier * Unladen weight: 4,600 kg * Front wall height: 2,040 mm * 6 pairs of lashing rings for rail transport * Frame height: 500 mm * Timber body with 8 pairs of Ecco Steel stanchions on container chassis * Stanchion height: 1,980 mm * Highlights: Lift axle / Timber transport / SAF axle Disclaimer: Subject to change, prior sale, and errors excepted. You can find more photos and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Processing of all (export) documents * Ordering of export license plates / customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. Ledpfxsyib H Ts Akmeru * Professional loading / load securing * TÜV inspections, registration service * Vehicle transfer of commercial vehicles Please contact our trained staff – we will be happy to advise you.