Used Floor Drill Mk3 From Erd* - Mk3 for sale (36,863)

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal and manual buttons. Sturdy construction on a pedestal. The drill table is adjustable in all planes. This is one of the newest Citoborma models. Bdedpfx Apozmu Erovef Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: good (used), Nagel Citoborma 490 Paper Drill This is the largest Citoborma drill currently in production. Very good condition, ready for production. The machine has 4 drilling heads. Drilling waste is discharged into a basket located at the rear of the machine. The machine is operated using a foot pedal or two-handed buttons. Each head has a separate up/down adjustment, allowing for the use of drill bits of different lengths. The set includes spare drill bits, tools, and an instruction manual. Technical specifications: Number of drilling heads: 4 (each head can be quickly removed) Maximum stack height: 60 mm Drill bit size: 2-10 mm Adjustable spacing: 45 – 425 mm Bdsdpfxozmu Efs Apvjf Two drilling speeds 380V power supply Weight: 365 kg Made in Germany.

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Bodpfx Aeif Az Ujpvedf Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Condition: good (used), Nagel Citoborma 180 Paper Drill This machine is 100% functional. This is the latest model. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill has an automatic table lock that releases after each cycle. Very good condition. Solid construction – weight 65 kg. 230V power supply Bdodpfx Apszdav Eovef One drilling head. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: used, Year of construction: 2016, Ref:11045 . 2016 Dürselen PB 04 N Paper Drill Free standing 4 headed paper drill Equipped with: Four drilling heads with adjustable spacing. Pneumatic cooling and lubrication for drills. Bedpfx Ajx Nfp Aopvsdf Automatic drilling cycle, foot pedal control. Waste directed to outer door Drill table with adjustment, front and side margins. Table lock is automatically released. Technical data: Diameter of the drill: 2-10 mm, Stack height: 60 mm.

Condition: new, bore capacity in steel (diameter) 60 mm bore capacity in cast iron (diameter) 70 mm threading cutting capacity: M50 throat 420 mm bore stroke 260 mm spindle taper MK 5 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 64 - 1210 U/min transmission ratio 12 Stufen column diameter 220 mm table surface area 600 x 600 mm total power requirement 4 kW weight of the machine ca. 0,82 t dimensions of the machine ca. 2,7 x 0,7 x 1,2 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch Bsdot U Scwjpfx Apvjdf - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark * Inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)

Condition: new, Year of construction: 2023, bore capacity in steel (diameter) 34 mm throat 300 mm bore stroke 150 mm bore capacity in cast iron (diameter) 40 mm thread capacity M 27 spindle taper MT 4 spindle speeds: Stufenlos 100 - 2000 U/min column diameter 125 mm automatic feeds 3 / 0,1 - 0,2 - 1,3 table: 400 x 420 mm Drive Keilriemen total power requirement 3 kW weight of the machine ca. 360 kg dimensions of the machine ca. 2,3 x 0,6x 1,1 m Column drilling machines - V-belt drive with foot switch - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading Bodpfx Apjt U Sc Rovsdf - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant device - Machine light - height-adjustable chip protection disc with micro switch - fixed table - CE marking

Condition: new, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M42 throat 360 mm bore stroke 200 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4 mm/U spindle turning speed range 190 - 1900 U/min column diameter 175 mm table surface area 550 x 550 mm total power requirement 4 kW weight of the machine ca. 0,85 t dimensions of the machine ca. 2,2 x 0,7 x 1,3 m - large stepless speed range in 3 stages - mechanical speed adjustment with hand lever (model V) - electronic speed adjustment with frequency converter (model VE) - Front digital speed display Bdeden Ea Twopfx Apvef - Gear lubrication by automatic oil pump “VE” - Machine base plate with integrated coolant device - Machine light - MGI rotating and tilting table - Advance and automatic retraction with electromagnetic clutch - Front hand wheel for fine adjustment of the manual feed - Scale with adjustable drilling depth - Automatic feed reversal when threading - automatic tool ejector - Electric controls integrated in the drill head - EMERGENCY STOP button - Switch for forward/reverse rotation - Height-adjustable chip protection disc with micro switch - CE marking

Condition: new, bore capacity in steel (diameter) 25 mm bore stroke 120 mm MK 3 10 manuell 245 – 4.100 U/min manuell über Griffkreuz 300 x 270 mm 100 mm 250 mm 0,71 / 1,35 kW 0,23 t 700 x 500 x 1400 mm Bench drilling machine with V-belt drive and moveable intermediate table Max. thread cutting capacity for steel (St 60) M 18 - V-belt drive with 5x stepped pulleys and quick-release device - 10 fixed speeds - manual feed via grip cross - Scale with adjustable drilling depth Bsdpfx Apjn Ea Tzjvedf - automatic tool ejector - Movable intermediate table, fixed drill head - Machine base plate with machined workpiece support surface - integrated machine light - EMERGENCY STOP button - Right/left rotation switch - High/low speed switch - Chip protection device with microswitch monitoring - thermal magnetic motor protection - Switching electronics in the low-voltage range - Color signal gray (RAL 7004) and graphite black (RAL 9011) - CE conformity and marking - Documentation, operation and maintenance manual

Condition: new, bore capacity in steel (diameter) 34 mm throat 300 mm bore stroke 150 mm bore capacity in cast iron (diameter) 40 mm thread capacity M 27 spindle taper MT 4 spindle speeds: Stufenlos 100 - 2000 U/min column diameter 125 mm automatic feeds 3 / 0,1 - 0,2 - 1,3 table: 400 x 420 mm Drive Keilriemen total power requirement 3 kW weight of the machine ca. 360 kg dimensions of the machine ca. 2,3 x 0,6x 1,1 m - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation Bdedot U Scqspfx Apvef - Electronic control integrated in the drill head - integrated coolant system - Machine light - height-adjustable chip protection disc with micro switch - fixed table - CE marking

Condition: used, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm bore stroke 230 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min Bdedpfx Apet U Sc Devof transmission ratio 12 Stufen column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW weight of the machine ca. 0,72 t dimensions of the machine ca. 2,6 x 0,6 x 1,2 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark * inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)

Condition: new, COLUMN DRILLING MACHINE IBERDRILL BZ 40 Bedpfx Aegy Haaopvsdf TECHNICAL DATA - STANDARD Max. drilling capacity for steel (St 60) under continuous operation S1: Ø 40 mm Max. drilling capacity for gray cast iron (GG 20) under continuous operation S1: Ø 45 mm Max. threading capacity for steel (St 60) under continuous operation S1: M 33 Max. threading capacity for gray cast iron (GG 20) under continuous operation S1: M 39 Tool holder in the spindle: MK 4 Max. spindle stroke (drilling depth): 180 mm Spindle motor power: 4.12 kW Drive: V-belt Speed adjustment: stepless Speed range for 50 Hz motor, n = 1,500 rpm: 100 - 2,000 rpm Feed: automatic or manual Number of automatic feeds: 3 speeds Range of automatic feeds: 0.1 – 0.2 – 0.3 mm/rev Table dimensions (width x depth): 480 mm x 480 mm Column diameter: 150 mm Distance spindle center / column: 350 mm Machine weight (net): 470 kg Gross weight: 520 kg Dimensions of transport packaging (length x width x height): 2.3 m x 0.6 m x 1.1 m STANDARD EQUIPMENT / BASIC MACHINE V-belt drive with frequency inverter Stepless speed adjustment via potentiometer Digital speed display 3 automatic feeds Electromagnetic clutch Ergonomic 4-way handle cross with integrated feed buttons Scale with adjustable drilling depth Automatic feed reversal when threading Automatic tool ejector Adjustable, rotating, and tilting work table (Type MGI) Machine base with machined support surface, T-slots, and integrated coolant system Integrated lighting EMERGENCY STOP button Chip guard with microswitch monitoring Thermo-magnetic motor protection, switching electronics in the low-voltage range Color: RAL 7004 (signal gray), RAL 9011 (graphite black) Documentation, operating and maintenance manual, CE

Condition: new, COLUMN DRILLING MACHINE IBERDRILL BC-50 VE TECHNICAL DATA - STANDARD Max. drilling capacity for steel (St 60) under continuous operation S1 Ø 50 mm Max. drilling capacity for grey cast iron (GG 20) under continuous operation S1 Ø 60 mm Bdedsgy Halspfx Apvof Max. thread cutting capacity for steel (St 60) under continuous operation S1 M 42 Max. thread cutting capacity for grey cast iron (GG 20) under continuous operation S1 M 50 Tool holder in the spindle MK 4 Max. spindle stroke (drilling depth) 200 mm Spindle motor power 4 kW Drive 3-speed gearbox and V-belt Speed adjustment stepless via potentiometer Speed range for 50 Hz motor, n = 1,500 rpm 30 – 300; 90 – 900; 190 – 1,900 rpm Feed automatic or manual Number of automatic feeds 4 speeds Range of automatic feeds 0.1 – 0.2 – 0.3 – 0.4 mm/rev Table dimensions (width x depth) 550 mm x 550 mm Column diameter 175 mm Distance spindle center / column 360 mm Machine weight net/gross 760 kg / 850 kg Dimensions of transport packaging (length x width x height) 2.4 m x 0.7 m x 1.3 m STANDARD EQUIPMENT / BASIC MACHINE Gearbox with high-quality gears and automatic oil pump lubrication and V-belt 3 gearbox speeds can be preselected via 1 front lever 3 speed ranges with stepless speed adjustment via frequency converter digital speed display integrated in the front panel 4 automatic feeds electromagnetic clutch ergonomic 4-way handle cross with integrated feed buttons handwheel for fine manual feed scale with adjustable drilling depth, automatic tool ejector adjustable, rotatable and tiltable work table (Type MGI) machine base plate with machined support surface, T-slots and integrated coolant system automatic feed reversal during thread cutting integrated lighting, EMERGENCY STOP button chip guard with microswitch monitoring thermomagnetic motor protection, switching electrics in the low voltage range Color RAL 7004 (signal gray), RAL 9011 (graphite black) Documentation, operating and maintenance instructions

Condition: new, COLUMN DRILLING MACHINE IBERDRILL AZ 40 TECHNICAL DATA - STANDARD Max. drilling capacity for steel (St 60) under continuous operation S1 Ø 40 mm Max. drilling capacity for grey cast iron (GG 20) under continuous operation S1 Ø 45 mm Max. threading capacity for steel (St 60) under continuous operation S1 M 33 Bdjdpegy E U Dofx Apvof Max. threading capacity for grey cast iron (GG 20) under continuous operation S1 M 39 Tool holder in the spindle MK 4 Max. spindle stroke (drilling depth) 180 mm Motor power, spindle 4.12 kW Drive V-belt Speed adjustment stepless Speed range for 50 Hz motor, n = 1,500 rpm 100 - 2,000 rpm Feed automatic or manual Number of automatic feeds 3 gears Range of automatic feeds 0.1 – 0.2 – 0.3 mm/rev Table dimensions (width x depth) 480 mm x 480 mm Column diameter 150 mm Distance spindle center / column 350 mm Machine weight (net) 460 kg Gross weight 510 kg Dimensions of transport packaging (length x width x height) 2.3 m x 0.6 m x 1.1 m STANDARD EQUIPMENT / BASIC MACHINE V-belt drive with frequency inverter Stepless speed adjustment via potentiometer Digital speed display 3 automatic feeds Mechanical clutch Scale with adjustable drilling depth Automatic feed reversal during threading Automatic tool ejector Adjustable, rotating, and tilting work table (Type MGI) Machine base plate with machined support surface, T-slots and integrated coolant system Integrated lighting EMERGENCY STOP button Chip guard with microswitch monitoring Thermo-magnetic motor protection, control circuitry in the low-voltage range Color RAL 7004 (signal gray), RAL 9011 (graphite black) Documentation, operating and maintenance manual, CE

Condition: new, COLUMN DRILLING MACHINE IBERDRILL AZ 34 TECHNICAL DATA - STANDARD Max. drilling capacity for steel (St 60) at continuous operation S1: Ø 34 mm Max. drilling capacity for grey cast iron (GG 20) at continuous operation S1: Ø 40 mm Max. thread cutting capacity for steel (St 60) at continuous operation S1: M 27 Max. thread cutting capacity for grey cast iron (GG 20) at continuous operation S1: M 33 Tool holder in the spindle: MK 4 Max. spindle stroke (drilling depth): 150 mm Spindle motor power: 3 kW Drive: V-belt Speed adjustment: stepless Speed range for 50 Hz motor, n = 1,500 rpm: 100 - 2,000 rpm Bjdpfxjgy E S Eo Apvjdf Feed: automatic or manual Number of automatic feeds: 3 speeds Range of automatic feeds: 0.1 – 0.2 – 0.3 mm/rev Table dimensions (width x depth): 420 mm x 400 mm Column diameter: 125 mm Distance spindle center / column: 300 mm Machine weight (net): 360 kg Gross weight: 410 kg Dimensions transport packaging (length x width x height): 2.3 m x 0.6 m x 1.1 m STANDARD EQUIPMENT / BASE MACHINE V-belt drive with frequency inverter Stepless speed adjustment via potentiometer Digital speed display 3 automatic feeds Mechanical clutch Scale with adjustable drilling depth Automatic feed reversal during thread cutting Automatic tool ejector Adjustable fixed work table (Type MF) Machine base plate with machined support surface, T-slots, and integrated coolant system Integrated lighting EMERGENCY STOP button Chip guard with microswitch monitoring Thermo-magnetic motor protection, control circuitry in low-voltage range Color: RAL 7004 (signal grey), RAL 9011 (graphite black) Control circuitry in low-voltage range Documentation, operating and maintenance instructions

Condition: new, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm Bjdpfx Aefg U Ttjpvodf threading cutting capacity: M36 throat 400 mm bore stroke 230 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW weight of the machine ca. 0,72 t dimensions of the machine ca. 0,6 x 1,2 x 2,6 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel (diameter) 60 mm bore capacity in cast iron (diameter) 70 mm threading cutting capacity: M50 throat 420 mm bore stroke 260 mm spindle taper MK 5 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 64 - 1210 U/min transmission ratio 12 Stufen column diameter 220 mm table surface area 600 x 600 mm total power requirement 4 kW weight of the machine ca. 0,82 t dimensions of the machine ca. 0,7 x 1,2 x 2,7 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head Bdjdofg U Tuepfx Apvsf - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, empty load weight: 9,028 kg, maximum load weight: 26,972 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 70 m³, suspension: air, tire size: 425/65R22,5, Equipment: ABS, | Knapen K-200 moving floor with folding roof | agricultural trailer 70m3 load volume | BPW axles with drum brakes | 10-ton axles | self-steering axle on the third axle | hydraulic tailgate | lift axle | 10mm floor | toolbox | cargo floor, Powerspeed system | tire pressure sensors | errors excepted. Bjdpfx Apow Agv Dovedf

Condition: used, functionality: fully functional, Type: Hydraulic Guillotine Manufacturer: HJO, Sweden Year: 1984 Max. plate thickness 4 mm Bjdpfxoxgcz Ij Apvedf Max. plate length 2500 mm Max. operating pressure 21.0 MPa V 3 x 380 Hz 50 Weight 3700 kg Quick action blade clearance adjustment, floor pedal control.

Condition: good (used), axle configuration: 3 axles, first registration: 02/2025, total length: 9,500 mm, total width: 2,450 mm, total height: 1,300 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2025, Equipment: ABS, = Additional Options and Accessories = Bdodpfxjzrd U Ts Apvof - EBS = Notes = Number of axles: 3, Payload: 37760 kg, Tare weight: 5240 kg, Gross vehicle weight: 43000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body construction year: 2025, Rotation direction: 2x20 + 1x30 + 1x40 + 1x45 high cube, Extendable chassis: center / rear, Axle type: BPW = Additional Information = General Information Cab: Day cab License plate: OV-02-RL Drivetrain Fuel type: Diesel Transmission Transmission: Manual Axle Configuration Tire size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 15 mm; Tire tread depth right: 15 mm Axle 2: Tire tread depth left: 16 mm; Tire tread depth right: 17 mm Axle 3: Tire tread depth left: 12 mm; Tire tread depth right: 12 mm Weights Unladen weight: 5,240 kg Payload: 37,760 kg GVWR: 43,000 kg Functional Loading area height: 115 cm Environmental Emission class: Euro 0 Maintenance APK (Technical Inspection): valid until 02.2027 Condition Technical condition: good Optical condition: good Damage: none Financial Information Leasing price: €606 per month (default, 60 months); Inquire for further information and conditions. = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands, from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, axle configuration: 2 axles, first registration: 05/2001, total length: 8,600 mm, total width: 2,600 mm, total height: 3,900 mm, suspension: air, tire size: 275/70R22,5, wheelbase: 7,510 mm, color: other, Year of construction: 2001, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Remarks = Number of axles: 2, twin wheels, payload: 23,280 kg, unladen weight: 8,720 kg, gross weight: 32,000 kg, chassis type: complete chassis, chassis material: steel, kingpin size: 2 inch, suspension type: air suspension, ABS, EBS, body year: 2001, axle type: BPW, tail lift, tail lift type: rear flap, tail lift capacity: 1,500 kg, tail lift material: steel = More information = General information Cab: Day cab Registration number: OG-63-PX Drivetrain Fuel type: Diesel Transmission Transmission: Manual Axle configuration Tyre size: 275/70R22.5 Brakes: disc brakes Suspension: air suspension Axle 1: twin wheels; left inner tyre tread: 6 mm; left outer tyre tread: 5 mm; right inner tyre tread: 6 mm; right outer tyre tread: 5 mm Axle 2: twin wheels; steered; left inner tyre tread: 6 mm; left outer tyre tread: 6 mm; right inner tyre tread: 7 mm; right outer tyre tread: 3 mm Weights Unladen weight: 8,720 kg Payload: 23,280 kg Gross vehicle weight: 32,000 kg Functional Tail lift: rear flap, 1,500 kg Environment Emission class: Euro 0 Condition General condition: moderate Technical condition: moderate Optical condition: moderate Damages: none = Company information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European makes, model years, and price ranges. Why buy from Kleyn Trucks? It’s simple! • Large, fast-changing inventory • Recognisable quality • Good prices • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are quickly arranged • Expert technical services • The assurance of "recognisable quality" • And more… Please visit our website for special offers and the complete inventory. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an enquiry via our website. Ask us directly about our European warranty package. Bdedpfx Apoyu Hzpjvof

Year of construction: 2007, condition: ready for operation (used), Four metalworking machines are offered. 1) Cloos GLC 255 MIG/MAG welding machine, year of manufacture: 2004, dimensions X/Y/Z: approx. 980mm/450mm/700mm, weight: approx. 115kg. 2) Cloos GLC 353 MC3 MIG/MAG pulsed welding machine, year of manufacture: 2007, weight: approx. 160kg. 3) hebö Type II bar twister, year of manufacture: 1979. 4) Eisele VMS II PV-p circular saw, year of manufacture: 1974, weight: approx. 290kg. Inspection by prior arrangement is possible. Bedpjzp Rhhsfx Apvedf

Condition: used, Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, sorting belt, sorting conveyor belt, readout conveyor belt -Side walls made of: stainless steel -Speed: 118 m/min -Drive: 0.75 kW -Belt width: 590 mm -Length: 2000 mm -Transport dimensions: 4360/1170/H1170 mm -Weight: 684 kg Bodpfx Apsffukrovsdf

Condition: used, Cast bed Bdedpfx Apozmxrijvsf Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Bedezmxq Eopfx Apvodf Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T