Used Gestra Check Valve Dn20 for sale (10,367)

Condition: used, functionality: fully functional, Agilent 1100 series G1160A 12/13 Sel Valve. The Agilent 1100 Series valves provide the user a comprehensive solutions for more flexibility through solvent selection and column selection. They offer new automation capabilities for sample preparation as well as higher sample throughput with alternating column regeneration. The Agilent 1100 Series valves are fully integrated in the CAN environment (control area network) of the Agilent 1100 Series LC system and can be controlled by the Agilent ChemStation Software. Good working condition. Please check out our other listings as well. Knsdpeuav I Hjfx Afdjb

Condition: used, Year of construction: 2018, clamping force: 500 kN, screw diameter: 27 mm, clearance between the columns: 360 mm, mold height (min.): 210 mm, ejector stroke: 70 mm, opening stroke: 600 mm, plate width: 500 mm, plate height: 470 mm, Equipment: documentation/manual, For sale is a used FANUC ROBOSHOT Alpha S50iA, manufactured in 2018. This compact injection molding machine is offered based on the current technical description and the attached machine photographs. Technical specifications: - Year of manufacture: 2018 - Clamping force: 500/650 kN - Screw diameter: 27 mm - Theoretical cylinder volume: 50 cm³ - Column spacing horizontal/vertical: 360 x 320 mm - Platen size: 500 x 470 mm - Mold height: 210 to 460 mm - Maximum opening stroke: 600 mm - Maximum ejector stroke: 70 mm - Core circle diameter: 125 mm - Hydraulic cores: 0 - Pneumatic circuits: 2 - Connected power: 30 kW Equipment and options: - Power transformer AC 400 V to AC 200 V - Air ejector, 3 circuits - Short shot detection - Euromap 67 - USB interface - Parallel tool movement / dosing - Parallel tool movement / ejector - Pre-injection function - Precision dosing function - Backflow measurement at the screw check valve - Nozzle with shut-off function, software - Hot runner valve control, 8 circuits (software) - Communication with temperature controllers (software) - Intelligent tool protection - Intelligent ejector protection - Tool set - Safety set - 21 freely programmable inputs/outputs - 2 analog inputs 0-10 V DC Knodpfjzwhdijx Afdsb - Alarm column with audible signal - Czech operating manual Optional services available upon request: The following services can be offered upon request and are not included in the machine scope: - 1-day operator training at the customer's site - Commissioning - Automatic clamping force correction during operation Operating hours, control system, ejector force, injection speed, injection pressure, screw/cylinder design, and robot interface are not specified. The machine is offered used and in its current condition. Technical specifications and scope of supply are to be confirmed before the contract is concluded. The written confirmed scope of supply shall prevail. Inspection and further information are available upon request.

Condition: used, functionality: fully functional, Agilent 1100 Series G1159A 6 Position Selection Valve. The 1100 Series Model G1159A 6 Position Selection Valve provides the user comprehensive solutions for more flexibility through solvent selection and column selection. It offers new automation capabilities for sample preparation as well as higher sample throughput with alternating column regeneration. It is fully integrated in the CAN environment (control area network) of the Agilent 1100 HPLC system and can be controlled by the Agilent ChemStation Software. Specifications: Weight 1.9 Kg Dimensions (height x width x depth) 92 x 84 x 200 mm Power supply 24 Volts DC (1.7 amps) Ambient operating temperature 4 to 55°C Knsdpsuavn Tofx Afdjb Humidity < 95%, non-condensing Good working condition. Please check out our other listings as well.

Condition: used, This listing is for a refurbished Laboklav 135M Autoclave 2018 Refurbished by the manufacturer Incl. commissioning in UK. (outside the UK is possible also, please request and we will try and accomodate) Vertical device, 135l, can be changed to horizontal version (stand required) Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 840 x 965 x 700 Chamber dimensions (Ø x d in mm) 500 x 660 Steam generator 10kW Fast re-cooling with double jacket 3N 400V, 50 HZ, 16A, CEE plug Refurbished according to manufacturer's specifications: Kodjxx Aqmspfx Afdenb Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status. Test runs to ensure and check functionality

Condition: used, Year of construction: 2006, functionality: fully functional, 2 pieces rotary valve dosing feeders ! Price per unit ! Manufacturer: Torex Knjdpfxsxd Dukj Afdsb Model: RV20 Connection size inlet/outlet: 300 x 300 mm Overall height: 455 mm Sealing strips made of rubber Bolted plastic lining of the individual compartments for improved discharge. Functionality has been checked! Bearings can be relubricated from the outside. Last used for dosing hydrated lime. Drive power: 1.5 kW Speed: 30.9 rpm

Condition: used, functionality: fully functional, Agilent 1100 Series G1158A 2 Position 6 Port Valve. The 1100 Series Model G1158A 2 Position 6 Port Valve provides the user comprehensive solutions for more flexibility through solvent selection and column selection. It offers new automation capabilities for sample preparation as well as higher sample throughput with alternating column regeneration. It is fully integrated in the CAN environment (control area network) of the Agilent 1100 HPLC system and can be controlled by the Agilent ChemStation Software. Knjdpfeuavv Dox Afdjb 2 for sale. 1 piece/590 EUR. Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, machine/vehicle number: C 2202067, Pallet Box Tipper 120x80x90 Ksdpfjxfg A Tex Afdenb Allows you to empty the contents of a pallet box fitted with wooden extensions. A pneumatic cylinder system locks the pallet onto the tipper. Maximum pallet weight to be tipped: 1000 kg. This ROTOVID 135° box tipper, model RV135, is ideal for completely emptying the contents of your boxes. With a 135° rotation, it allows efficient rotation and emptying of your containers. FEATURES OF THE ROTOVID 135° BOX TIPPER: - Rotation and return controls via hold-to-run push buttons - Side and rear safety guards - Electrically actuated check valves at cylinder exits - Floor fixing brackets - Receptacle size adaptable to your requirements - Fixed containment barrier - Customizable discharge height - Light curtains compliant with European standard ISO 13855 - Discharge chute - Fixed retaining bar - Discharge flap - HDPE coating - Protective grilles compliant with European standard ISO 13857 - Designed and manufactured in France

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked Knsdpfxoyz Dhzs Afdob - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: used, Year of construction: 2006, Zum Verkauf steht ein größerer Posten pneumatischer Prozessventile mit Antrieb. Gesamtmenge: 96 Stück – ca. 65 Einheiten als komplette Ventile mit Edelstahl-Kugelhahn – restliche Einheiten: pneumatische Antriebe / Ersatzteile Die Komponenten stammen aus industrieller Anwendung (Prozessanlage) und wurden fachgerecht demontiert. Ein Teil der Einheiten wurde überprüft, mehrere Komponenten zeigen funktionsfähigen Zustand. Die vollständige Funktionsprüfung aller Einheiten wurde nicht durchgeführt. Geeignet für: – Chemische Industrie – Lebensmittel- und Getränkeindustrie – Wasser- und Prozesstechnik – Wartung, Ersatzteilversorgung, Wiederverkauf Neupreis vergleichbarer Einheiten: ca. 120–300 € pro Stück. Sehr interessanter Posten für Händler oder industrielle Instandhaltung. Verkauf vorzugsweise komplett. Preis: 4.200 € VB Standort: Slowakei (EU) Versand europaweit möglich For sale: large lot of pneumatic process valves with actuators Total quantity: 96 units – approx. 65 complete units with stainless steel ball valves – remaining units: actuators / spare parts The components originate from industrial process application and were professionally dismantled. Some units have been checked, several appear to be in working condition. Full functional testing of all units has not been performed. Suitable for: – chemical industry Knodpfx Ajy Nfzxsfdjb – food & beverage processing – water treatment – maintenance and spare parts supply – resellers Estimated new price of comparable units: approx. 120–300 € per unit. Very attractive lot for traders or industrial maintenance. Preferably sold as one lot. Price: 4,200 € negotiable Location: Slovakia (EU) Worldwide shipping available

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Overhauled: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) - Integrated coolant system with solenoid valve (controlled via swing system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly - New drive motor (SEW Germany) with brake - The machine has been freshly painted with 2-component structural paint Kedpfx Ajw H Dgnsfdonb General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Condition: excellent (used), functionality: fully functional, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 26,390 kg, drive condition: 75 %, Year of construction: 2023, operating hours: 2,360 h, Equipment: UVV, adjustable boom, gripper hydraulics, hammer hydraulics, Hyundai, Crawler Excavator, HX235ALCR ENGINE Cummins B6.7 / STAGE V Engine Power: 173 hp (129 kW) at 2,200 rpm HYDRAULIC SYSTEM ELECTRIC POSITIVE FLOW CONTROL (EPFC) 3 Power Modes, 2 Work Modes, User Mode Variable Power Control Electronic Pump Flow Control (EPFC) Flow control for attachment mode Idle Auto Function Automatic Engine Shutdown Electronic Fan Control CAB AND INTERIOR CAB ACCORDING TO ISO STANDARD Top-mounted windshield wiper Radio/USB player Hands-free mobile phone system with USB 12V power outlet (24 VDC to 12 VDC converter) Electric horn All-weather steel cab with 360° panoramic view Safety glass, toughened Windshield as a sliding window Sliding glass window (left) Lockable door Storage compartment and ashtray Transparent cab roof liner Sun visor Door and cab locks, one key Pilot-controlled joystick with pre-control pressure assist Height-adjustable console system AUTOMATIC CLIMATE CONTROL Air conditioning and heating Defroster Cold weather starting aid (intake air preheater) CENTRAL MONITORING 8" LCD display Engine RPM or odometer/speedometer Engine coolant temperature gauge Maximum power Slow/fast travel speed Idle Auto Function Overload warning with alarm Engine check Air filter clogged Indicators ECO indicators Fuel level indicator Hydraulic oil temperature indicator Fuel preheater Warnings Communication error Low battery capacity Clock SEAT Mechanically suspended, heated driver's seat CAB WITH ROPS ROPS (Rollover Protective Structure) ISO 12117-2 SAFETY Work Mode Master switch, battery Rear-view camera Four front work lights (2 on the boom, 2 on the front frame) Driving alarm Electronic swing parking system Boom holding system Stick holding system Boom cylinder safety valve with overload warning device Two exterior mirrors OTHER Removable radiator dust screen for cleaning Removable storage container Fuel preheater Fuel pre-filter Self-diagnosis system Batteries (2 x 12 V × 100 Ah) Accumulator for lowering work equipment UNDERCARRAGE Lower frame cover (standard) Ground plates Triple-plate ground plates (600 mm) Track roller guides Boom 5650 mm (Variable length boom) Boom safety valves (Variable length boom) Stick 2920 mm Stick safety valve (on variable length boom) With bucket linkage Upper carriage for variable length boom 2-way lines for hydraulic hammer and grapple, proportional Proportional lines for rotation function Lines for quick coupler Long crawler undercarriage with blade holder Kjdpfjzdrbljx Afdjnb Ground plate 1 pedal (Variable length boom/2-way) Crawler tracks 600 mm (triple-plate) Front blade Reinforced lower frame plates 19 inch Kawasaki joysticks + EPFC Proportional joysticks Fine swing control Swing lock One-pedal straight-line travel system Air-suspended, heated seat SmartKey + button + auto shutdown Fuel filling pump Air compressor Hyundai HX paint With work light on the boom (LED) Work light at the front of the cab (LED) Work light at the rear (LED) All-around view monitor (AAVM) FOG protection (front and top) Laminated 7mm window glass Fuel preheater Central lubrication Beka (Variable length boom) (Europe) Hydraulic oil - VG46 Turbo II air precleaner Hydraulic quick coupler CW40 with LH, with one digging bucket

Condition: used, For enquiries about the attachment, Mr. Herden will be happy to assist you (by phone). Kinshofer Pallet Clamp / Block Stacking Clamp / KM 332 V – 1100 / NEW Price: €8,790.00 net / €10,460.10 gross Insertion depth (mm): 1,100 – 1,650 Load capacity at min./max. insertion depth (kg): 1,900 / 1,350 Opening width A min./max. (mm): 400 – 1,400 Height (without motor) (mm): 1,315 – 1,865 Weight (without clamping rails) (kg): 340 Operating pressure at flow rate: 20 – 26 MPa (200 – 260 bar) at max. 75 l/min and 20 – 37 MPa (200 – 370 bar) at max. 40 l/min The technically advanced KM 332 block stacking clamp offers versatile usage for both palletized and non-palletized building materials. - Fixed or adjustable insertion depth with hydraulically operated parallel opening and closing grab arms. - Versatile application thanks to opening widths from 400 mm to 1,400 mm, ideal for loading single concrete elements such as kerbstones as well as complete brick packs. - Adjustable insertion depths – perfect for loads with varying heights. - Synchronisation of the grab arms by two hydraulic cylinders, interconnected via a differential system. - Safety ensured by an overpressure valve in the hydraulic system to protect against overload. A check valve prevents release of the clamped package, even in the event of pressure loss in the carrier. - Durability thanks to generously sized bearings, integrated lubrication reservoir, automatic main bearing wear compensation, and spherical central cylinder mounting. We have a large selection of various attachments immediately available from stock! Mr. Herden (Tel.) will be happy to assist you. On request, we are pleased to provide you with a tailored financing offer. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. Knedpfx Afoyfm Ecodob We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used commercial vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. Subject to prior sale and errors excepted! = Further Information = New: Yes Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2020, We are selling a used Zaugg Vario4-360-4-45 snowplow, manufactured in 2020. Zaugg snowplow, type VARIO4, plow body upper part with a plastic plate, adjustable blade shape, mechanically or hydraulically, with four to six Zaugg suspension elements and PUR side protection. Includes the following components: - Plow body type Vario4-360-4 (Art. No. SP 4509-0-360) - Set of wear rails Küper Kombi S36 360-4 (Art. No. SP 2156-0-108) - Pair of curb deflectors, rubber, 100mm (Art. No. SP 6355-0) Knjdpfxozmb Tio Afdsb - Hydraulic swivel device Vario4-45° with HY 3587-0 telescope cylinder TZ 45/60-1000 (Art. No. SP 6332-0-102) - Parallelogram G33/Vario4-45° with lifting cylinder (Art. No. SP 4568-0) - Support 880 SP 3113-0 (Art. No. SP 6307-0) - Mounting plate G33-45° EN15432 F1 (Art. No. SP 6175-0-107) - Hydraulic blade adjustment for VARIO4, kit consisting of: - 2 adjustment cylinders with unlockable check valves - Hose lines up to the connecting piece (Art. No. HY 1377-0-111) - Overpressure valve block, size 3 with hose lines (Art. No. SP 2114-0) - Hose set for lifting, double-acting (Art. No. HY 229-0-135) - Hose set for swiveling (Art. No. HY 230-0-142) - Hose set for adjustment (Art. No. HY 1401-0-110) - Snow dust protection VARIO4, 300 (Art. No. SP 6091-0) - Flashing position light, LED 9-36V, mounted on the plow body. Location: 99428 Weimar

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Knjdpfx Aezu Aibsfdob Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Year of construction: 2017, condition: used, functionality: fully functional, Gemü 55415D19510 2/2-Way angle seat globe piston valve, pneumatically operated with threaded cast copper. PST 4,8-7 bar 180 C PS 12 bar 4 for sale. 1 piece/55 EUR. Good working condition. Please check out our other listings as well. Knedpst D Rfijfx Afdeb

Condition: good (used), functionality: fully functional, Year of construction: 2009, operating hours: 8,549 h, lifting height: 6,500 mm, free lift: 2,300 mm, fuel type: electric, mast type: triplex, construction height: 2,890 mm, battery capacity: 778 Ah, battery voltage: 80 V, fork length: 1,200 mm, overall weight: 5,300 kg, total height: 2,890 mm, total length: 3,800 mm, total width: 1,200 mm, Equipment: 4th hydraulic function, lighting, sideshift, €11,000 net Jungheinrich EFG 430 electric forklift Year of manufacture: 2009 Operating hours: 8,549 h Year of battery manufacture: 03/2022 Kedpezxfn Ujfx Afdonb Battery capacity: 775 Ah at 80 volts Load capacity: 3,000 kg Lifting height: 6,500 mm; of which approx. 2,300 mm free lift Overall height: 2,890 mm Overall dimensions approx.: 1,200 mm wide; 3,800 mm long Weight approx.: 5,300 kg including battery Fork length: 1,200 mm Including charger Work lights at the front and rear Side shifter 4th hydraulic valve still available The machine is in perfect working order and ready for immediate use. Affordable delivery by a specialist company is possible. Please also check out our other listings. We constantly have many more high-lift and low-lift trucks and forklifts in stock. Do you need spare parts for your forklift, high-lift truck, etc.? Simply contact us. ID: 80-396280

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 300-2000 CX Injection Molding Machine Year of manufacture: 2010 Control system: MC5 Type: Hydraulic injection molding machine Equipment Fully hydraulic clamping unit MC5 control system with a color monitor Integrated operator panel 3 USB ports Plasticizing unit for thermoplastic materials 70 mm screw with abrasion protection Check valve Open nozzle Clamping Unit Clamping force: 3000 kN Platen dimensions: 995 × 1050 mm Tie bar spacing: 630 × 630 mm Opening stroke: 820 mm Maximum opening: 1150 mm Minimum mold height: 330 mm Ejector stroke: 200 mm Ejector force: 57.7 / 28.3 kN Injection Unit Screw diameter: 70 mm Injection pressure: 1877 bar Injection volume: 1078 cm³ Kedpfx Afjzkaflsdjnb Injection weight (PS): 981 g Injection rate: 385 cm³/s Injection rate with accumulator: 1155 cm³/s Screw speed: 220 / 310 rpm Plasticizing Unit For thermoplastic materials Abrasion protection Check valve Open nozzle Electro-hydraulic System Pump motor power: 55 kW Heater power: 29.2 kW Number of heating zones: 6 Number of dry cycles: 1350 cycles/h Oil tank capacity: 720 l Dimensions and Weight Dimensions: 6500 × 2200 × 2300 mm Weight: 14.5 t

Year of construction: 2012, condition: excellent (used), functionality: fully functional, machine/vehicle number: A0008858, Used Verderer VA25S-A01AS2SSSSPTPT Air-Operated Double Diaphragm (AODD) pumps with stainless steel configurations., serial number: A0008858; year of manufacture: 2012. Very good condition The specific arrangement code you provided (VA25S-A01AS2SSSSPTPT) designates a heavy-duty metallic pump constructed with a Stainless Steel fluid section, Stainless Steel seats, and PTFE (Teflon) balls and diaphragms, and defines a heavy-duty, highly corrosion-resistant configuration of the Verderair VA 25 Air-Operated Double Diaphragm (AODD) pump. This specific model is typically engineered to handle aggressive chemicals, strong acids, solvents, and high-temperature fluids The operating limits and physical profile for the Verderair VA 25 SS SS TF TF include the following parameters: Connection Size (Liquid):1" BSP or NPT (Threaded) Connection Size (Air): 1/2" NPT Maximum Flow Rate: 189 liters per minute (50 GPM) Maximum Discharge Pressure: 8.6 bar (125 PSI) Maximum Fluid Temperature: 104°C (220°F) Limited by the PTFE components Maximum Suction Lift (Dry): 3.0 to 4.9 meters Maximum Suction Lift (Wet): 6.0 to 8.8 meters Maximum Particle Size: 3.2 mm (Solids handling capacity) Pump Weight: approx. 16.5 to 18.8 kg (heavy due to full-metal construction) Certifications: ATEX certified (safe for explosive atmospheres) Knjdpfx Ajz Abcpefdob Dimensions: L 470 mm x W 250 mm x H 360 mm SS (Fluid Section): 316 Stainless Steel housing and manifolds. Provides high chemical resistance and mechanical durability; SS (Air Section / Check Valve Seats): Depending on the generation, this represents a heavy-duty Stainless Steel center air section or Stainless Steel valve seats. It avoids the corrosion or cracking risks associated with aluminum or plastic components in harsh environmental conditions; TF (Check Valve Balls): PTFE (Teflon) check balls. Ensures a tight seal and broad chemical compatibility during cycling; TF (Diaphragms): PTFE (Teflon) diaphragms (typically backed by an EPDM layer for flexibility). PTFE offers the highest level of universal resistance to corrosive fluids; Price 2.490 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2004, saw band length: 2,825 mm, High-performance mitre band saw Fully hydraulic semi-automatic Technical data: Cutting capacity: Round tube 90° – 230 mm, 45° – 200 mm Rectangle 90° – 300 x 170 mm, 45° – 190 x 150 mm - Cutting speed: 40 + 80 m/min - Saw band dimensions: 2825x27x0.9 mm Equipment: - Double mitre, right up to 60°, left up to 45° - Quick approach vice for material clamping - Base frame with electric coolant immersion pump and check valve - Semi-automatic operation via steplessly adjustable lowering cylinder, with shut-off via limit switch Kedpfxex H Rpij Afdenb

Condition: like new (used), functionality: fully functional, power: 298 kW (405.17 HP), Year of construction: 2022, operating hours: 118 h, Equipment: UVV, Weight: approx. 65,000 kg Max. working height: 28.15 m Extremely sensitive – incredible reach Undercarriage hydraulically extendable to 4.50 meters Engine: Cummins QSG12: water-cooled 6-cylinder engine with Common Rail injection and AdBlue Stage V, 298 kW / 405 hp (2,100 rpm) Hydraulics: Load Sensing, max. 2 x 360 l/min 1st proportional auxiliary control circuit for grapple/hammer on joystick 1 Ksdpjzaqp Usfx Afdonb 2nd non-proportional auxiliary control circuit for auxiliary equipment on joystick 2 Safety check valves for boom and jib with overload indicator Quick coupler hydraulic circuit, double-acting Swing brake 2 travel speeds ROPS driver cabin, adjustable Protective grille ISO for roof Protective grille ISO for windshield Boom and arm (supplied with a separate support for transport) Demolition boom and arm (28 m) with intermediate joint (supplied with a separate support for transport) Adjustable undercarriage from 3,340 to 4,500 mm Steel tracks 600 mm Battery main switch Travel alarm and rotating beacon Engine emergency stop switch LED light bar on driver cabin LED spotlights 2x on boom LED spotlight 1x on toolbox 12V socket Document compartment Radio with speakers AUTOMATIC CLIMATE CONTROL Rear view camera 8 x auxiliary circuit flow setting via on-board computer with multi-function monitor Floor mat Cup holder Angle warning for working outside the safety angle (75 degrees) Air-sprung seat with fabric cover and seat heating Fueling pump All-round view camera

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Process Systems LEP13.2 KK6771 Package 11 System type: Temperature Control Unit – LEP13.2 AS Storage Project: Ammonium Sulfate Supply and Disposal Unit: KK6771 Year of manufacture: 2020 Serial number: 1003622 Equipment number: 20022749 LEP13.2 – AS Storage Temperature Control Unit TECHNICAL DATA Product: LEP13.2 – AS Storage Temperature Control Unit Medium: Ammonium sulfate Design: Pharmaceutical / GMP Product-contact materials: 1.4435 / 1.4301 stainless steel Dimensions (L x W x H): approx. 1900 x 1545 x 1580 mm Control air supply: 6 bar (AIP) Tested pressure range: up to approx. 3–4 bar (Leak test documented) MAIN COMPONENTS 2x centrifugal pumps Horizontal shell-and-tube heat exchanger Electric flow heater Expansion vessel Pressure and temperature measurement points Pneumatic control valves Manual ball valves (GEMÜ) Stainless steel control cabinet / terminal box Fully insulated piping APPLICATION The temperature control unit is used for precise temperature regulation in the ammonium sulfate storage system of a pharmaceutical production facility. Suitable for: - Pharmaceutical production environments - GMP-regulated systems - Media temperature control systems - Turn-over package integration DESIGN / CONSTRUCTION - Complete, pre-assembled skid unit - Stainless steel frame construction - Compact design with unobstructed maintenance access - Fully piped and insulated - Clear labeling of all measuring points and fittings - Pharmaceutical-grade execution as per CSL Behring customer specification - P&ID checked - Layout checked - Multiple documented leak tests - Calibrated measuring devices with certificates The system is fully assembled and prepared for seamless integration into existing pharmaceutical installations. CONDITION Knsdpfsyl I S Dox Afdjb - As-new / Project system - Year of manufacture: 2020 - FAT completed - Pressure test passed - Complete documentation available COMPREHENSIVE DOCUMENTATION Includes, among others: - Factory certificates according to EN 10204 - Material lists - EU declarations - Inspection reports - Documentation of installed equipment - I&C documentation - As-built isometrics - User manual - Calibration certificates SPECIAL FEATURES - Project-specific pharmaceutical design - GMP-compliant manufacturing - Complete skid-mounted construction - Compact footprint (approx. 1.9 x 1.5 m) - Maintenance-friendly layout - High-quality piping insulation - Ideal for technical areas close to cleanrooms

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Process Systems Type: LEP 2.3 System Type: Temperature Control Unit for Washing and Elution Solutions Year of Manufacture: 2020 Serial Number: 1003563 Kjdpsyl Ipcsfx Afdjnb Device Number: KK6752 Design: Stainless Steel Skid, Pharmaceutical Construction LEP 2.3 KK6752 Package 7 Technical Data Design: Compact, pre-assembled temperature control unit on a welded stainless steel frame (skid system) Materials: Product-contact: Stainless Steel 1.4435 / 1.4404 Non-product contact: Stainless Steel 1.4301 Piping System: Orbital welding (pharmaceutical grade) Fully welded construction As-built isometric drawing available Pressure Data: Leak test using compressed air Test pressure: 3.37 bar Holding time: 1 hour Result: Leak-free Measurement and Control Technology: Pressure measurement (PIR, PI, PIRC) Temperature measurement (TI, TIRC) Level measurement (limit) Flow monitoring Position feedback Motor control On/Off pneumatic valves Pressure sensor measuring range: 0–10 bar Electrical Connection: Control air: 6 bar Automation-capable (PLT nodes fully documented) Main Components: 2 process pumps Plate heat exchanger Finned tube heat exchanger Expansion vessel Multiple hygienic control and shut-off valves Integrated instrumentation units Cooling Medium: Chilled brine (supply/return interfaces available) ───── Dimensions / Weight Construction: Compact skid unit Industrial design for cleanroom/technical areas (Transport and installation dimensions as per layout drawing) Application Area Temperature control of: Washing solutions Elution solutions Process media in biopharmaceutical environments Fields of Application: Biotechnology Plasma fractionation GMP production facilities Build / Construction Welded stainless steel frame Low-vibration pump mounting Hygienic piping Full implementation according to P&ID Clear separation between product and non-product areas Service and maintenance access tested Mechanical SAT-IQ test performed Metrological SAT-IQ test performed P&ID diagram check completed Layout drawing check completed Condition Manufactured in 2020 Industrial and pharmaceutical version New, original packaging Pressure tested Sensors calibrated FAT performed FAT / Documentation Available: FAT plan and report Deviation management Layout check P&ID check Leak test Sensor calibration Service and accessibility inspection EN10204 factory certificate Material lists (LBM) As-built isometry Component lists (equipment & PLT nodes) Special Features Pharma-GMP compliant design Complete validation documentation Full traceability Certified pressure testing Calibration certificates from accredited laboratories High-quality plant construction by BRINOX High-end biopharma standard

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100–12000 MX injection molding machine Year of manufacture: 2008 Robot: Wittmann Control: MC5 Equipment Fully hydraulic clamping unit MC5 control with color monitor Integrated operator panel 3 USB ports Plasticizing unit for thermoplastic materials Screw Ø 120 mm with abrasion protection Check valve Open nozzle Clamping unit Clamping force: 11,000 kN Opening force: 770 kN Platen dimensions: 2210 × 1910 mm Distance between columns: 1550 × 1250 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum mold height: 1200 mm Maximum opening: 2600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1758 bar Knjdpfx Afjzkanyodob Injection volume: 6786 cm³ Injection weight (PS): 6175 g Screw speed: 103 / 145 rpm Injection rate: 1118 cm³/s Injection rate with accumulator: 1696 cm³/s Plasticizing unit Designed for processing thermoplastic materials Version with abrasion protection Check valve Open nozzle Electro-hydraulic system Pump motor power: 132 kW Heater power: 82 kW Number of heating zones: 7 Number of dry cycles (Euromap): 802 cycles/h Oil tank capacity: 2440 l Dimensions and weight Dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Weight: 73 t

Condition: good (used), WMA WMP 08 One-Hand Spot Welder Air-cooled one-hand spot welder for vehicle manufacturing, tank construction, steel cabinet manufacturing, sheet metal processing, and the wire industry - Effortless welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools are easy to change thanks to standardized rotary connectors - Only one connector each for welding current cable, control cable, and water cooling Kedpfx Aoq H Aqxefdjnb - Reproducible welding results at any time thanks to built-in, automatic energy control Microprocessor Thyristor Control - Constant current control - Seamless process monitoring - Simple and user-friendly operation - All set parameters and process variables can be read at a glance - Changes to welding parameters only by authorized personnel - Configuration and program settings can be managed via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 welding times - 8 programs - Built-in unit - Automatic Mains frequency detection 50/60 Hz - Power failure-proof parameter storage - "On/Off" switching via button Additional configuration parameters (user-locked): - Program selection - Advance contact - Advance contact time - Two-hand interlock (Check) - Start signal interlock - Current flow control - Response threshold - Current flow control - Monitoring time - Current flow control - Power factor adjustment - First half-wave delay External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. ``` External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay progress contact - Relay ready Manufacturer: WMA Type: WMP 08-01 Rated voltage: 400 V Mains frequency: 50 Hz Rated power (at 50% duty cycle): 22.5 kVA Control cabinet with PLC logo PDF files available under the Documents tab Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2013, Krauss Maffei KM 1600–17200 MX Blu Power Injection Molding Machine Year of manufacture: 2013 General description Modern injection molding machine equipped with a fully hydraulic clamping unit. The machine features an advanced MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Operation is performed via an integrated, 19-inch control panel with a color touchscreen, LED backlighting, and graphical visualization of all active processes (ProcessDesigner module). Plasticizing unit Complete unit for processing thermoplastic materials Screw diameter: 135 mm Version with wear-resistant (abrasion-resistant) protection Check valve Open nozzle Technical data Clamping unit Clamping force: 16,000 kN Opening force: 1,120 kN Dimensions of clamping plates (width × height): 2550 × 2100 mm Distance between columns (width × height): 1870 × 1420 mm Opening stroke: 2700 mm Mold height (min.–max.): 700–1600 mm Maximum daylight: 3400 mm Ejector stroke: 350 mm Ejector force (forward / backward): 300 / 150 kN Injection unit Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1784 bar Injection volume: 9662 cm³ Injection weight for PE: 6860 g Screw speed (nominal / maximum): 81 / 100 rpm Electrical and hydraulic equipment Main motor power: 160 kW Installed heater power: 93 kW Kedpfxszrgfhj Afdsnb Number of heating zones: 7 Number of dry cycles according to EUROMAP 6: 648 cycles/h Oil tank capacity: 2400 l Dimensions and weight Net weight (with control cabinet): 92 t Machine dimensions (length × width × height): 14.17 × 4.04 × 2.93 m