Used Grub Screws, 30 Pieces for sale (36,136)

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1425505, overall weight: 557 kg, load capacity: 30 kg, arm reach: 2,101 mm, controller manufacturer: KUKA, controller model: KR C4, teach pendant manufacturer: KUKA, teach pendant model: smartPAD-2, Equipment: documentation/manual, For sale: a KUKA KR 30 R2100 robot, complete with a KR C4 controller, smart PAD, and cabling. The Cognex camera shown in the picture is not included in the sale and will be removed before shipment. Ibsdpfx Agjz R R Udsysc The robot comes from a dismantled palletizing station for KLT boxes. Very low operating hours. Excellent condition.

Condition: like new (used), functionality: fully functional, extraction nozzle diameter: 300 mm, Two exhaust fans in like-new condition are for sale. They ran very little. They can be tested on-site. The price is for the pair. Iedszz Scwepfx Agyobc The intake diameter is 300 mm. The motor power is 11 kW.

Year of construction: 2011, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1613030303, Saw blade diameter 280 mm Ibedjz S Nayopfx Agyoc Saw blade speed 3,200 rpm Power supply 230/400 V, 3~, 50 Hz Power output 1.05 kW Length 650 mm, depth 750 mm, height 1,300 mm, weight 130 kg Accuracy is achieved by cutting from below Wide pivoting range of up to 0° to the right and up to 45° to the left The special pivoting mechanism with integrated turn table enables working from the front at any angle position The workpiece stop is adjustable to allow optimal use of the saw blade capacity for wide and flat profiles Manual material clamping unit (vertical) Machine is ready for operation, saw blade was sharpened

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Pressure: 3 tons Ijdoz Rk N Hjpfx Agyebc Made in Germany.

Condition: used, Limit switches, buttons, safety switches, position switches Ibjdpfednn H Aox Agyoc -Activation radius: adjustable -Minimum operating radius: 45 mm -Number: 30 pieces -Price: complete

Year of construction: 2022, operating hours: 80 h, condition: new, functionality: fully functional, Clextral extruder Type: Evolum EV032 M Extruder: 40D Barrel length: 10 x 128 mm Stroke length: 1420 mm Water: 4.5 - 5.5 Bar Air pressure: 6 Bar Steam injection: 2 - 6 bar Power: 3 x 400V, 50Hz, 83kW Dimensions: 4475 x 1200 x 2100 mm Weight: 1905 kg Only 80 operating hours! Clextral water pump Type: CLX DKM Flow: 6 - 42 l/h Pressure: max. 10 bar Reservoir: 7.5 liters Power: 0.55 kW Dimensions: 1265 x 350 x 700 mm Cextral / Prominent oil pump Type: GMXA1604 Flow: 0.3 - 2.5 l/h Pressure: max. 10 bar Reservoir: 10 liters Dimensions: 900 x 700 x 1150 mm Clextral High Moisture Extrusion Cooking die HMEC type: 2 x 800 mm length Material: CLX202 Internal section: 60 x 8 mm Dimensions: 1900 x 700 x 1200 mm TLV steam set Type: 2/10 TLV Serial number: SV148 Isdpfxsz S Idko Agyjbc Steam flow: 2 - 10 kg/h Steam pressure: 6 - 10 bar Maximum pressure: 10 Bar Steam inlet: DN15, PN16 Steam outlet: DN15, PN16 Air pressure: 6 - 10 bar Dimensions: 700 x 1600 x 2200 mm Weight: 150 kg 2 pcs. Tooltemp temperature control unit Type: TT1398-3 Serial number: 321-5642-1 / 2 Year of construction: 2021 Power: 3 x 400V, 50Hz, 7.9kW Dimensions: 750 x 300 x 760 mm Weight: 70 kg WAM Group ploughshare mixer Type: WBH20008C023 Serial number: 17WB220000121 Year of construction: 2022 Mixer: 75 liters Dimensions: 1200 x 1600 x 1650 mm Weight: 500 kg Immequip screw conveyor Type: ELV 70/80-R Hopper: 150 liters Output: Ø 100 mm Power: 3 x 400V, 50Hz, 0.55kW Dimensions: 3100 x 1350 x 2600 mm Brabender dosing system Type: DDW-M-DDSR20 Serial number: 2200836.0636 Year of construction: 2022 Feed rate: 11 - 26 kg/h MTA France chiller Type: TAEevo TECH 081 Serial number: 2200377928 Year of construction: 2021 Refrigerant: R410A Cooling capacity: 20.6 kW Power: 3 x 400V, 50Hz, 14.2kW Dimensions: 1950 x 800 x 1500 mm Weight: 340 kg

Condition: used, EOS / Transitube Powder conveying system / dosing system EOS Transitube DCL 800/30 PM Automatic powder conveying and dosing system for two components For sale is a used powder conveying system from the manufacturer Transitube / tim plast Anlagenbau GmbH. The system is used for the continuous dosing, conveying, and homogenization of powders, ground materials, or granules and is ideally suited for plastics processing, extrusion, and injection molding. Technical data: Manufacturer: transitube / tim plast Anlagenbau GmbH Type: DCL 800/30 PM Designation: EOS powder conveying system Dosing system for 2 components 2 material containers, each approx. 400 liters Continuous dosing and mixing Materials: Powder Granulate Ground material / regranulate Power connection: 3/N/PE 400 V AC Frequency: 50 / 60 Hz Connected load: 2.0 kW Weight: approx. 180 kg Dimensions (approx.): Width: 1850 mm Depth: 900 mm Height: 1320 mm Dosing capacity, model-dependent: approx. 50 to 2,000 kg/h Dosing accuracy: ±0.5 to ±2 % Dosing range: 5 to 50 % Additive dosing: 0.2 to 10 % Equipment: 2 dosing containers with hinged lids Automatic control cabinet with touch panel Transitube conveying and mixing system Electrical control Screw dosing Pneumatic components Flowserve Automax actuators Conveying motor with gearbox Various conveying hoses Piping Accessories as shown in the pictures Application areas: Plastics industry Extrusion Injection molding Powder conveying Material dosing Regranulate dosing Mixing systems Production automation Condition: Used Visual condition as shown in the pictures. Scope of delivery as shown in the pictures. Scope of delivery: 1x EOS Transitube DCL 800/30 PM powder conveying system Complete control cabinet Conveying units Motors Pneumatic components Hoses Piping system Accessories as shown in the pictures Important note: The system is sold as shown in the pictures. Please note the scope of delivery in the photos. Tables, tools, or other aids that may be visible in the pictures are not included in the scope of delivery unless explicitly stated. Shipping via freight forwarder is possible. Inspection is possible at any time by appointment. Subject to prior sale and errors. Ijdpfx Agezn H D Noyjbc If you have any questions, please do not hesitate to contact us by telephone.

Condition: repair required (used), Year of construction: 2018, operating hours: 34,881 h, functionality: limited functionality, power: 45 kW (61.18 HP), volume flow: 502.2 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Equipment: type plate available, Screw compressor 45 kW 8.50 bar 8.37 m3/min Year of manufacture: 2018 Operating hours: 34,881 Ibedpfxoz Iz Ito Agyjc Problem with the cooling system. The temperature is rising rapidly. The compressor is running.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, cooling capacity: 500 kW (679.81 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,224 kg, input voltage: 400 V, total width: 2,200 mm, total length: 4,800 mm, total height: 2,600 mm, input frequency: 50 Hz, Equipment: compressor, cooling unit, type plate available, AERMEC NS2352X - Air-Cooled Screw Chiller, 500 kW, 2x BITZER / CAREL Ready-to-run 500 kW air-cooled screw chiller from a single previous industrial installation. Inspected, function-tested and documented by Ozsayin - industrial refrigeration engineering since 1982. --- WHY THIS UNIT --- - 500 kW (430,000 kcal/h) in one package: one machine instead of two mid-range units, one set of connections, one control point. - 2 x BITZER CSH8563-90Y-40P semi-hermetic twin-screw compressors. Worldwide parts availability, fully rebuildable - no proprietary dead end, no obsolete-compressor risk. - Shell & tube evaporator: serviceable, cleanable and re-tubeable, unlike brazed-plate exchangers that are scrapped once fouled. - CAREL controller with open protocol - straightforward BMS integration. - Two independent refrigeration circuits: stable part-load operation and built-in redundancy for critical processes. - Available in days, not the 20-30 week lead time of a new machine. --- TECHNICAL DATA --- Manufacturer / Model: AERMEC NS2352X Year of construction: 2012 Cooling capacity: 500 kW (430,000 kcal/h) Compressors: 2 x BITZER CSH8563-90Y-40P, semi-hermetic twin-screw Refrigeration circuits: 2, independent Evaporator: shell & tube Condenser: copper tube / aluminium fin Ibjdpfx Agsl Dqtwjysc Fans: 8 x axial Control system: CAREL Power supply: 400 V / 3 ph / 50 Hz Dimensions (W x L x H): 2,200 x 4,800 x 2,600 mm Weight: 3,224 kg Condition: excellent (used), fully functional --- SCOPE OF SUPPLY --- Included: technical inspection and function test before dispatch, photo and test documentation on request, loading onto truck ex works Adana. On request: full refurbishment (compressor overhaul, coil cleaning, new refrigerant charge, control retrofit, industrial repainting); on-site commissioning by our own engineers in Turkey and the EU; 12-month warranty package; spare parts and long-term service from our own compressor workshop. RENTAL: this unit is also available for short or long-term hire - seasonal peaks, plant shutdowns or standby capacity. --- DELIVERY & EXPORT --- Ex works Adana, Turkey. Road freight to any EU destination arranged on request. Full export documentation (A.TR / EUR.1) provided - under the Turkey-EU Customs Union there is no import duty for EU buyers. --- ABOUT OZSAYIN --- Building, refurbishing and servicing industrial refrigeration since 1982. Sales office Istanbul, production and workshop Adana, European operations Tallinn/Estonia. Chillers, screw compressors, process cooling and heat exchanger engineering. --- NEXT STEP --- Price on request. Send us your duty point - chilled water in/out temperature, ambient temperature and flow rate - and we will confirm the actual capacity of this machine at YOUR conditions within one working day, together with a firm price and delivery time.

Condition: new, Year of construction: 2025, functionality: fully functional, air demand: 200 m³/h, total width: 2,400 mm, total height: 2,350 mm, total length: 3,500 mm, Cartridge filter system MBX-6000 with 8 cartridges. Suitable for filtering all types of dust, e.g. wood, sand, etc. Effective air output: 6000 m³/h, electric motor 9 kW, 3x400 Volt, 50Hz, filter area: 104 m² (8x13 m²), filter class: M, according to DIN 60335, filter cleaning: pneumatic, 10 min run-on. Dust containers: 4 pcs, each 30 liters. Clemco blasting pot (used), 100 liters Iedsx Ai Hpopfx Agyjbc Screw compressor Renner RSK 1-30, year of manufacture 2020, 1178 operating hours.

Condition: like new (used), Year of construction: 2025, operating hours: 778 h, functionality: fully functional, machine/vehicle number: 4152034870, overall weight: 610 kg, fuel type: electric, pressure (max.): 10 bar, noise level: 73 dB, type of cooling: air, Equipment: documentation/manual, type plate available, | Manufacturer | Schneider Druckluft GmbH | | Model | AMG 37S MEAA | | Type | Screw compressor | | Year of manufacture | 2025 | Iedez Tcl Eepfx Agyobc | Product number | 4152034870 | | Motor power | 37 kW | | Power supply | 400 V / 50 Hz / 3 phases | | Operating pressure | 10 bar | | Maximum pressure | 10 bar | | Air flow rate* | 5,700 l/min or 5.70 m³/min | | Weight | 610 kg | | Dimensions (W × D × H)* | 1,330 × 830 × 1,555 mm | | Noise level | 73 dB(A) | | Air connection* | 1¼″ | | Maximum ambient temperature | 40 °C |

Condition: excellent (used), Year of construction: 2011, ABB IRB260-30/1.5 – robot only, 20% discount when ordering more than one robot. DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, with a large service area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Ibjdpfx Agjz Tagajyoc

Condition: used, axle configuration: 2 axles, first registration: 04/2021, loading space length: 7,900 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, total length: 11,890 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/55R22.5, tire condition: 70 %, color: white, Year of construction: 2021, Equipment: ABS, tail-lift, Axle configuration Tyre size: 385/55R22.5 Tyre tread: 70% Rear axle 1: Reduction: single reduction Rear axle 2: Reduction: single reduction Weights Unladen weight: 6,960 kg Payload: 23,040 kg Gross vehicle weight (GVW): 30,000 kg Functional Tail lift: DHOLLANDIA 2000KG Body manufacturer: Burgers Condition Isdpfx Agjy Udpreyobc Damages: none = Company Information = Heisterkamp Used Trucks BV does not just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are immediately ready for operation. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today’s requirements and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - Email: - Website:

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, segment jaws, stepped top jaws, top jaws -Manufacturer: Schunk, hard stepped jaws, 1 set = 3 pieces -Type: SZKA 213 Jaw width 30 mm -Dimensions: see photo technical drawing Ijdpoz Szkqsfx Agyjbc -Submission/Price: complete -Dimensions/Set: 70/90/H50 mm -Weight: 1.4 kg

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: Ibsdpfxey Ufk Rj Agyec ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Condition: good (used), Indexable insert drills, high performance drills with indexable inserts, solid drills, end mills, end mills, milling cutters, indexable insert mills, end mills with internal cooling, indexable insert end mills Ibsdpfxork S Dxj Agyjc -Finger milling cutter: indexable insert end mill with internal cooling, 2 pieces -Receptacle: Ø 25 mm -Diameter: 25 and 30 mm -Levy/Price: complete -Transport dimensions: 210/70/H40 mm -Weight: 1.0kg

Condition: used, Ball screw with SIEMENS servo motor Linear guide with SIEMENS permanent servo motor Type: 1FK6044-7AH71-1EG0 Type: 1FK7044-7AH71-1EG0 Ijdpfegi E Hdox Agysbc Identification No.: YF RN22 5076 01 001 Year of manufacture: 2003 Axis travel: 540 mm Overall length: 900 mm Shaft diameter: 40 mm Thread pitch: 40 mm Ball diameter: approx. 6 mm - Compact unit with servo motor and ball screw nut - Ball screw with twist-resistant guidance, drive via nut - Ball screw Ø 40 mm (hollow shaft, inner diameter = approx. 22 mm) - SIEMENS permanent servo motor, type: 1FK6044-7AH71-1EG0 (Serial No.: Identification No. YF RN22 5076 01 001) Overall dimensions L x W x H: 900 x 200 x 330 mm Weight: 30 kg Good condition Removed from a functional special machine, tested before removal. 8 units available The stated price refers to 1 unit.

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective Ibedpfsvmivcjx Agyec System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Without guarantee - without warranty -

Condition: good (used), Year of construction: 2011, Kaeser Sigma Air Manager (SAM) 8/4 – used: Price ex works: €2,750 (net) plus disassembly, etc. Manufacturer: Kaeser Type: SAM 8/4 Iodpsz Sd I Hjfx Agyobc Year of manufacture: 2011 Serial number: 2015 Part number: 7.7731.1 0-10 bar 100-240V/1/N/PE/50|60Hz 0.7 - 0.35 A SWASAMX.A-01020.01 Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: used, Year of construction: 2013, .30 Base machine ACCORD 30 FX N. 1 CONCEPTCNC machining center with a moving gantry and a fixed worktable for processing various sheet-like materials: chipboard, MDF, laminated solid wood, plastic materials, and light alloys. STRUCTUREThe machine is developed using the best three-dimensional CAD systems for solid modeling. The machine bed and moving crossbeam represent the two main elements of the machine structure and are manufactured in the company's own foundry. All mechanical machining operations are carried out on special production equipment in a single setup to ensure optimal precision and to minimize tolerances during machining. The control cabinet is mounted directly on the machine bed, allowing for a very compact design and easy access. CONTROL UNITThe control unit consists of an industrial NC control system with an integrated office PC (desktop computer). The CNC solution with an office PC combines all the features of numerical control with the typical user-friendliness of an office PC, which greatly simplifies the control of the machine by enabling the use of the XILOG MAESTRO user interface, i.e., the software developed by SCM for simple and fast programming, even for non-experts. GENERAL FEATURESPassage height: - 250 mm with H50 accessories- 190 mm with H110 accessoriesPendulum machiningAutomatic lubrication of the axesAir conditioning system to maintain the correct internal temperature in the control cabinet. Software for remote customer serviceOperator interface Xilog MAESTRO with integrated CAD/CAM, which allows for the extremely simple execution of products even with special shapes.A number of advanced functions allow for: - programming via macros- creating and managing subprograms- optimizing machining- managing all machine functions- creating and managing a database of tools93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz R0.00.03 LINGUA P.C. GERMAN 02.12.57 ACCORD 30 FX - Worktable X-Y = 3680x1380 56.05.25 No. 6 Support rail MATIC - L1300 The worktable is equipped with: - no. 2 lateral fixed supports- no. 6 aluminum supports, motor-driven and movable along the X-axis- motorized conveyor belt for unloading chipsEach movable support has: - no. 3 motor-driven support rails for clamping cylinders and vacuum suction cups- air blower for cleaning on each movable support- pneumatic locking/release for quick replacement of the clamping cylinders and vacuum suction cups- preparation for lifting devices- preparation for reference stopsThe workpiece vacuum clamping system is divided into 2 independent worktables.23.02.19 DUO Prisma K working unitThe working unit with 5 interpolating axes is located on the moving crossbeam, which provides maximum stability during milling and thus also ensures optimal machining quality of the workpieces, even with high material removal rates. It allows for rotation around the axes arranged at 50° to each other and has many advantages over traditional 5-axis working units, such as: - the full use of the work areas both with 5 axes and with a vertical spindle- spindle external dimensions outside the working area- a particularly light design for horizontal machiningThe unit has a central chip extraction system. Iodpfx Ajzl Ap Njgyobc

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical data: * Manufacturer: Kaeser Kompressoren * Model: SM 11-TA 11-280 * Type: Screw compressor * Motor power: approx. 11 kW * Compressed air tank: 280 liters * Compressed air treatment: Refrigerant dryer * Drive: Electric motor * Design: Compact compressed air station with tank and dryer Features and advantages: * High-performance screw compressor for commercial use * Integrated compressed air tank for buffering the compressed air * Refrigerant dryer to reduce moisture in the compressed air * Compact design for space-saving installation * Suitable for workshops, trades, and smaller production facilities * Proven Kaeser quality and reliable screw compressor technology Ibodpfxoz Rkp Hj Agyoc

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, DIESEL ATLAS COPCO XAS 88 compressor with an aftercooler (dryer), fully serviced. Ibodpfsz Rxczox Agyec Compressor complete with documentation for registration in Poland. Technical data: flow rate: 5.20 m3/min; operating pressure: 7 Bar; year of manufacture: 2019; weight: 750 kg; engine: KUBOTA; compressor in fully working condition. net price: PLN 57,500 gross price: PLN 70,725 Below is a link to a video showing the machine in operation.

Condition: excellent (used), functionality: fully functional, Mobile Inclined Screw Conveyor / Elevating Screw Feeder Type: Inclined screw conveyor mounted on a mobile chassis Ibodpfjz Sd U Tex Agysc The elevating screw conveyor is a professional transport device designed for reliable and continuous vertical and inclined transfer of raw materials and bulk products, including those used in the poultry, meat, vegetable, or food processing industries. This machine finds wide application in food processing plants, meat processing facilities, and slaughterhouses. Inside the enclosed, robust working tube is a precisely manufactured screw made of stainless steel, which ensures a stable and consistent flow of material, minimizing the risk of blockages and damage to its structure. The use of a low-maintenance drive and a large loading hopper located in the lower part significantly optimizes logistical processes in the production line. The mobile base with a hydraulic lifting system allows for quick adjustment of the discharge height to meet current production needs.

Condition: new, Year of construction: 2024, load capacity: 30 kg, arm reach: 2,100 mm, controller manufacturer: KUKA, controller model: KRC5, teach pendant manufacturer: KUKA, control cabinet width: 60 mm, control cabinet height: 100 mm, ROBOTIC ARM BRAND: KUKA Ibedpfx Aez Szl Isgyec MODEL: KR 30 R2100 / SEL TECHNICAL DESCRIPTION PAYLOAD: 30 KG MAX. REACH: 2100 MM YEAR OF MANUFACTURE: 2024 CONTROL UNIT: KRC5 SOFTWARE: KSS 8.7 OPTIONS: KRC 5 dualcab BA C5 dualcab AC SPB USB KSI

Condition: good (used), Screw compressor, Kaeser – used: Price ex works: €2,750 (net) plus disassembly, etc. Ibsdpfx Aez Sd I Tjgyoc Manufacturer: Kaeser Type: AS 36 Year of manufacture: unknown Kaeser Sigma Control Operating hours: unknown, 96,000 hours recorded in 08/2024, but has been idle for some time. Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia