Used Hilma Vl 125 for sale (3,896)

Condition: excellent (used), Hydraulic vice Hilma company Jaw width 200 mm jaw height. 65 mm maximum clamping width 440 mm Ijdok N A Dmepfx Af Tsib total height 160 mm total length 1030 mm transport dimension : L.700 mm W.280 mm H.160 mm Weight 115 kg

Year of construction: 1981, condition: excellent (used), faceplate diam 1300mm Isdpek Dz N Iefx Af Tjib max turning diam 1100mm range of turning diam 460-1250mm

Condition: excellent (used), Year of construction: 2013, fuel type: electric, YALE ERP25VL electric 4 wheel forklift Load capacity: 2500kg Year of construction: 2013 Operating hours:12825 Lifting height: 3400mm complete cabin with heating Mast type: Duplex Fork side shifter Fork length: 1200mm Special equipment: full cabin with heating Lighting: Full lighting system with hazard warning lights Engine: AC Battery volts: 80V Battery Ah: 620Ah Hawker MotionLine pulse mains charger 80V 100A Battery level approx. 70% Front tires size: 23X10-12 SE Rear tires size: 18X7-8 SE Ijdpfx Afjnl Er Ds Teib The truck also comes with doors.

Condition: good (used), functionality: fully functional, rotational speed (min.): 2,840 rpm, volume flow: 3,240 m³/h, pressing: 10,000 Pa, power: 18 kW (24.47 HP), High pressure centrifugal fan, dust extraction fan, pressure fan, vacuum fan, centrifugal fan, high pressure fan Spellna VRU 15-125-30H3 Condition: used impeller: forward curved steel, direct drive. 700mm Drive motor:18 kW Ijdpfx Ajticdlsf Tsib p1:1,2kg/m3 pressure:9500-12000Pa Number of revolutions:2950rpm air transport:3240m3/h Volume output:0.9m³/s Print pt:100 mbar Connection input:Ø 300 mm Connection output:Ø 200mm Dimensions: 1400x1400x960mm Mass: 350

Condition: good (used), Technical data for the pallet rack traverse: Iodpfx Afolvrg Rs Teib Rack system: Stow Type: Pal Rack NS Included in delivery are: 01x pallet rack traverse, used Material color: RAL 2004 orange box profile: 125 x 50 mm type of cross beam: PNB0485/1.5 agraffe: 4 HK (hooks) clear width: 3.600 mm max. load per truss pair 1.832 kg, with evenly distributed load 02x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out

Condition: used, Technical details: jaw width: 160 mm weight of the machine approx.: 65 kg span width: verstellbar mm * Isdpfx Afewbg N Uo Toib

Condition: good (used), 1 used vise Manufacturer: Hilma Model: KNC 160 For horizontal clamping Clamping against fixed jaw Mechanically operated With mechanical-hydraulic force transmission With fully encapsulated spindle Jaw width: 160 mm Isdjw Skgdepfx Af Teib Max. clamping force: 50 kN Max. clamping range: 436 mm Overall length: 594 mm Overall height: 115 mm

Condition: good (used), Hollow spindle stroke Iijdodbc E Nopfx Af Tjb Diameter 125 mm Weight 6.6 kg

Condition: used, electronic clamping elements, twist-and-turn clamps -Clamping force: 160 kN -stat. max.: force 30 kN -Clamping stroke: 15 mm Iijdpfxjdhclge Af Tjb -Total stroke: 60 mm -Dimensions: 720/200/H220 mm -Weight: 60 kg

Condition: used, Hydraulic power unit with HILMA hydraulic pump Iiodoxf Uyyjpfx Af Tob Hydraulic power pack, hydraulic unit Type: 5034-4302 Operating pressure: max. 500 bar Flow rate: 1.2 litres/min. Motor power: 0.75 kW Tank capacity: approx. 4.5 litres Power supply: 400 Volt, 50 Hz - HAWE piston pump, type R 1.5 - 1 piece HAWE 2/2-way valve, type WGR 2-1 (230 V DC) - Pressure regulator Required space (L x W x H): 280 x 260 x 480 mm Net weight: 25 kg Good condition

Condition: excellent (used), Extension for HILMA vice jaw width 160 mm Iedsnl Drzspfx Af Tjib Jaw width extension length of tie rod 560 mm Weight 21,5 kg

Condition: like new (used), Tower Clamping System TS 125 Magnum Jaw width: 125 mm Clamping ranges: 1 x 476 mm 2 x 226 mm 4 x 108 mm Overall height: 780 mm Clamping stroke per carriage: 64 mm Clamping force: 40 kN Price: €7,850.00 + VAT Position 2 4 pcs hydraulic vices Jaw width: 125 mm Iodpfx Ajidl Rrof Teib Overall length: 400 mm Price per piece: €850.00 + VAT Price for 4 pcs: €3,000.00 + VAT Position 6 Preci Tool NC, type 125 Jaw width: 125 mm Overall length: 430 mm Only 1 fixed jaw Price: on request Position 8 HILMA machine vice with rotary base mechanical/hydraulic Clamping force: 40 daN Jaw width: 125 mm Overall length: 430 mm Price: €850.00 + VAT Position 9 HILMA machine vice mechanical/hydraulic Clamping force: 50 daN Jaw width: 160 mm Overall length: 550 mm Price: €900.00 + VAT Position 10 HILMA machine vice mechanical/hydraulic Clamping force: 25 daN Jaw width: 100 mm Overall length: 380 mm Price: €650.00 + VAT Position 11 HILMA machine vice with rotary base mechanical/hydraulic Clamping force: 40 daN Jaw width: 125 mm Overall length: 430 mm Price: €850.00 + VAT Position 12 HILMA machine vice with rotary base mechanical/hydraulic Clamping force: 50 daN Jaw width: 160 mm Overall length: 620 mm Price: €1,050.00 + VAT Position 26 HILMA machine vice (trade show model) Jaw width: 125 mm Overall length: 430 mm Price: on request Position 28 HILMA machine vice mechanical/hydraulic Clamping force: 25 daN Jaw width: 100 mm Overall length: 570 mm Price: €700.00 + VAT Position 32 Clamping angle plate Clamping surface: 160 x 420 mm Price: €150.00 + VAT Position 33 Clamping angle plate with HILMA vice Jaw width: 125 mm and force transducer Price: €450.00 + VAT

Condition: like new (used), Tower Clamping System TS 125 Magnum Jaw width: 125 mm Clamping ranges: 1 x 476 mm 2 x 226 mm 4 x 108 mm Height: 780 mm Clamping stroke per clamping slide: 64 mm Clamping force: 40 kN Price: €7,850.00 + VAT Position 2 4 pcs. hydraulic vices Jaw width: 125 mm Length: 400 mm Price per unit: €850.00 + VAT Price for 4 units: €3,000.00 + VAT Position 6 Preci Tool NC, type 125 Jaw width: 125 mm Length: 430 mm Only 1 fixed jaw Price: on request Position 8 HILMA machine vice with rotary base mechanical/hydraulic Clamping force: 40 daN Jaw width: 125 mm Length: 430 mm Ijdeic Rnuopfx Af Tjib Price: €850.00 + VAT Position 9 HILMA machine vice mechanical/hydraulic Clamping force: 50 daN Jaw width: 160 mm Length: 550 mm Price: €900.00 + VAT Position 10 HILMA machine vice mechanical/hydraulic Clamping force: 25 daN Jaw width: 100 mm Length: 380 mm Price: €650.00 + VAT Position 11 HILMA machine vice with rotary base mechanical/hydraulic Clamping force: 40 daN Jaw width: 125 mm Length: 430 mm Price: €850.00 + VAT Position 12 HILMA machine vice with rotary base mechanical/hydraulic Clamping force: 50 daN Jaw width: 160 mm Length: 620 mm Price: €1,050.00 + VAT Position 26 HILMA machine vice (Trade Fair Version) Jaw width: 125 mm Length: 430 mm Price: on request Position 28 HILMA machine vice mechanical/hydraulic Clamping force: 25 daN Jaw width: 100 mm Length: 570 mm Price: €700.00 + VAT Position 32 Angle plate Clamping surface: 160 x 420 mm Price: €150.00 + VAT Position 33 Angle plate with HILMA vice Jaw width: 125 mm and force measuring cell Price: €450.00 + VAT

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: FXH14B001, turning length: 1,600 mm, spindle speed (max.): 2,500 rpm, travel distance Z-axis: 900 mm, workpiece weight (max.): 8,000 kg, table diameter: 1,250 mm, The machine has only been used approximately 5 times! Iedpex Atpbofx Af Toib TECHNICAL DETAILS Travel X-axis: −685 mm to +680 mm Travel Z-axis: 900 mm Travel W-axis: 800 mm Max. swing diameter: 1.600 mm Max. turning length: 1.600 mm Max. workpiece weight: 8,000 kg Table Table diameter: 1,250 mm Low speed: 5–120 rpm High speed: 150–300 rpm Machining spindle Spindle speed: 25–2,500 rpm Max. spindle torque: 478 Nm C-Axis Nominal speed: 3.33 rpm Feed range (milling): 0.1–3,000 mm/min Feed range (turning): 0.01–500 mm/rev Tool changer Tool shank: BT50 Tool magazine capacity: 16 Max. tool diameter: 220 mm Max. tool length: 500 mm Max. tool weight (milling): 25 kg Max. tool weight (turning): 50 kg Tool change time: 30 s MACHINE DETAILS Control brand: Fanuc 0i-T Dimensions Machine height: 5,625 mm Machine weight: 22,000 kg Supply Electrical connection: 90 kVA Air requirement: 5.5 kg/cm² Coolant capacity: 150 l

Condition: excellent (used), Vice Hydraulic Vice Manufacturer: Hilma Jaw Width: 125 mm Jaw Height: 43 mm Max. Clamping Length: 220 mm Rotary Plate Height: 140 mm Weight: 43.5 kg Stock Number: (28623) Iijdpfxewf Hdao Af Tjb

Condition: used, hydraulic vise Iijdpfx Ajdhlqyof Tob Make Hilma Jaw width 200 mm Jaw height 65 mm total length 690mm GES. Height 205 mm maximum opening width 440 mm Drive vertically and horizontally with crank Rotary plate 400 x 370 mm Clamping force 8 to.

Condition: excellent (used), Vise Iisdjfhvkmepfx Af Tjb Make Hilma Jaw width 100 mm Opening width 170 mm height 90 mm Weight 17 kg

Condition: excellent (used), hydraulic vice make HILMA jaw width 200 mm maximum opening width 335 mm jaw height 68 mm total total height 168 mm minimum length 690 mm maximum length 920 mm maximum width 290 mm Weight 114 kg Iedpfx Aeg Eztcjf Teib

Condition: good (used), hydraulic vise Iiedpjdttz Uofx Af Tsb Make Hilma with JAWS Jaw width 160 mm Opening width 262 mm Jaw height 65 mm Shipping dimensions: L. 540 x B. 250 x H. 145 mm

Condition: excellent (used), Year of construction: 2013, Saacke TEMINOX GLS 125-45 dual-fuel burner 10500kw, oil+gas. Year of manufacture 2013. Iiodpfx Aovrkcnjf Teb

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor Iiodpox Suzajfx Af Tsb * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: excellent (used), 1.- Plate size Ø 400 mm 2.- Centre bore 3.- Centre height 250 mm 4.- Working position Vertical Plate (horizontal axis) 5.- Load capacity (centred in the plate): * Horizontal Axis (Vertical Plate) 500 Kg * Vertical Axis (Horizontal Plate) 1.250 Kg * Vertical Axis with tailstock (Horizontal Plate) 1.250 Kg 6.- Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and a radial rigid one at the back. This offers a great rigidity to the table. 7.- Transmission by SPIRSIN gears in hardened steel. Ratio 90/1 Ref. 90-90/1-I 8.- Transmission between motor and pinion by pulleys and toothed belt. Ratio 48/36=1,333/1 9.- Total Ratio: 120/1 10.- Motor torque recommended (Type Alpha iF12/3000 HV): 12Nm 11.- Motor speed: 3.000 rpm 12.- Max. rotation speed: 25 rpm 13.- Hydraulic clamping system……………P = 50 bar. 14.- Clamping torque…………….3.800 Nm 15.- Pressure switch for clamp / unclamp signals confirmation. 16.- Maximum axial force…………….. 55.000 N. 17.- Tangential torque……………. 3.800 Nm. 18.- Tilting moment…………… 8.950 Nm. 19.- Equipped by a precision HEIDENHAIN encoder, type RCN 2390F, direct in the plate´s shaft. a. Positioning …………….. ± 5 seg b. Repeatability ……………. ± 1,5 seg 20.- Flatness of the plate turning 0,030 mm 21.- Squareness between the base and the plate …0,020 mm 22.- Concentricity of centre bore 0,010 mm 23.- Weight without motor (approx.) 380 Kg 24.- Indexing time (90°, include clamping/unclamping) …… 1,5 seg Indexing time (180°, include clamping/unclamping) …… 2,5 seg TECHNICAL DATA: TABLE SUPPORT SD.250.F/D.400-H 25.- Table support without transmission, free rotation. It will be rotated from the drive table (table B). Iijdshq Uklopfx Af Tsb 26.- Plate size: Ø 400 mm Prepared to receive and fix a special device developed by the client. 27.- Centre bore: Hole to centre the special device developed and decided by Dalian 28.- Eleven (11) fluid exits on the plate. They will be taken through the centre shaft of the plate. Entrances of the fluid at the rear of the table support. Threads 3/8 NPT. 29.- Centre height: 250 mm 30.- Working position:Vertical plate (horizontal axis) 31.- Load capacity (centred in the plate): * Horizontal Axis (Vertical Plate) 500 Kg * Vertical Axis with rotary table (Horizontal Plate) 1.250 Kg 32.- Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and 2 radial bearing. This offers a great rigidity to the table. 33.- Hydraulic clamping system……………P = 50 bar. 34.- Clamping torque…………….3.800 Nm This clamping fixed to the rotary table one, both would operate simultaneously 35.- Flatness of the plate turning 0,030 mm 36.- Squareness between the base and the plate … 0,020 mm 37.- Concentricity of centre bore 0,010 mm 38.- Weight without motor (approx.) 240 Kg NOTE: PRICE INCLUDES ROTARY TABLE + ENCODER + MOTOR

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 1204197, functionality: fully functional, pressing force: 125 t, stroke length: 120 mm, table width: 700 mm, table length: 1,100 mm, hole diameter: 52 mm, ram adjustment: 100 mm, No reserve price - guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period from 23.06.2026 to 26.06.2026! TECHNICAL DETAILS Press force: 1,250 kN Isdsy D Nnljpfx Af Toib Speed range: 30 - 250 rpm Ram stroke: 8 - 120 mm Ram adjustment: 0 - 100 mm Ram bore diameter: 52 mm Table dimensions: 1,100 x 700 mm MACHINE DETAILS Controller manufacturer: UNIDOR Drive power: 35 kW Dimensions & Weight Dimensions (L x W x H): 6,000 x 2,400 x 3,300 mm Machine weight: 12,000 kg EQUIPMENT Decoiler, diameter approx. 1,200 mm Workshop drawer cabinet with clamping devices External reference: 68

Condition: new, Year of construction: 2025, pressing force: 130 t, table width: 750 mm, table length: 1,000 mm, punching force: 130 t, drop-through hole in table: 220 mm, ram bore: 55 mm, stroke adjustment: 140 mm, warranty duration: 24 months, Equipment: safety light barrier, Eccentric presses are a type of mechanical press powered by the force generated through an eccentric mechanism, commonly used for cold forming processes such as punching, cutting, and die forming. With high production speed and repeatability, they provide an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 125 Ton is engineered for stable operation in cold forming applications. Its rigid steel welded body, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for series production. Key Advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light barrier + safety systems) - Low maintenance requirement thanks to central automatic lubrication - Production-ready operation with PLC control + dual hand/foot controls Fields of Application: - Cold cutting and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel welded frame Iiodpovtyvgsfx Af Tob • 4-sided slide guidance • Spheroidal cast iron connecting rod and gear bearings • Crankshaft and transfer shafts made from 4140 hardened steel • Central fully-automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Dual-coil safety valve • Manually adjustable stroke • Light barrier finger/hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety lock system • Emergency reverse motor movement • Occupational safety regulation compliant • CE-conformant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD panel (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare table • Decoiler, feeder, and straightener • 1 die set tailored to specifications • Eight-point slide guide ✅ TECHNICAL SPECIFICATIONS (125 TON) Capacity: 125 Tons Throat depth: 310 mm Distance table–slide: 500 mm Distance between slide and table: 510 mm Distance between uprights: 450 mm Slide adjustment (stroke adjustment): 100 mm Press width: 1500 mm Press depth: 2200 mm Press height: 2700 mm Front anchorage (footprint): 790 mm Side anchorage (footprint): 1250 mm Table hole diameter: Ø210 mm Table size: 630×820 mm Die clamping slot diameter: Ø55 mm Slide size: 500×250 mm Table height from floor: 785 mm Stroke adjustment: 10–125 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Weight: 6000 kg Note: Please inform us if you require changes to the technical specifications. ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 125 t, stroke length: 200 mm, table width: 750 mm, table length: 1,100 mm, warranty duration: 24 months, Equipment: safety light barrier, Eccentric presses are mechanical presses used in cold forming operations such as punching, cutting, and die forming, operating with force generated via an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process security thanks to their rigid frame design. Iiodox N R U Ropfx Af Teb The CRONOSSTECH CEHP-TB-125 – 125 Ton H Type Eccentric Press is designed for stable operation in high-volume production, with a focus on die protection and operator safety. With a monoblock body, 8-point slide guide system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production environments. Key Advantages - Stable and repeatable production with 1100×750 mm table size - Die/equipment protection with hydraulic overload safeguard - Controlled and user-friendly operation via PLC + touchscreen interface - High operator safety with light curtain protection - Low maintenance requirement with automatic lubrication system Applications - Punching/cutting/forming operations - Serial production with automatic feeding lines - High-volume manufacturing processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch-brake • Additional T-slotted plate • 8-point slide guide • Adjustable stroke on single connecting rod • Balancer piston on the ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse motor operation • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain safety sensor • Enclosed gear group in oil reservoir • Dual-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap disposal systems • Sliding safety cover at the table front • Custom die specifications ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-125) Capacity: 125 Ton Table-Ram Distance: 500 mm Housing Width: 1130 mm Ram Adjustment: 100 mm Press Width: 2700 mm Press Depth: 2200 mm Press Height: 4500 mm Table Size: 1100×750 mm Ram Face Size: 1100×750 mm Stroke (Fixed): 200 mm Motor Power: 18.5 kW Weight: 14,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales support are managed by CRONOSSTECH.