Used Honing Machine Sunnen Ec 3500 for sale (70,800)

Condition: used, Year of construction: 1998, honing diameter 90 mm stroke 490 mm throat 400 mm total power requirement 10 kW weight of the machine ca. 3.500 kg Itsdpfxet Hw T Sj Acaek dimensions of the machine ca. m

Condition: used, Year of construction: 1996, workpiece diameter 240 mm centre distance 0 mm honing length max. 500 mm max. module 5 total power requirement 12 kW Iodpfxst Hwvme Acaotk weight of the machine ca. 5000 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Iedpst Hwzpjfx Acaetk Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Condition: used, honing diameter 165 mm stroke 120 mm centre height 100 mm total power requirement 1,5 kW weight of the machine ca. 1 t We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : SUNNEN (USA) Horizontal Automatic Honing Machine model MBC 1804 G year Serial no 1K1-190075 _____ Honing range – Ø with gauge control 1,5 – 51 mm with automatic stroke 1,5 – 95 mm with manual stroke 1,5 – 165 mm Workpiece honing length max. approx. 400 mm Workpiece honing lengthe with gauge control 254 mm 12 spindle speeds 200 – 2.500 rpm 5 stroke rates 80 – 310 stroke/min Iodpfx Asw U U Iqjcastk Length range of automatic stroke 6 – 120 mm Power of spindle 0,75 kW - 380 V - 50 Hz Total drive appro. 1,5 kW - 380 V - 50 Hz Accessories / Special Features • Automatic Working Cycle with aut. mechanical stroke, aut. hydr.-mechanic Honingtool-feed and aut. cycle stop when the nominal size is reached • Elektro-mechanical gauge control with a probe in the nominal diameter-size mounted opposite to the main spindle, which initiates the cycle stop when the nominal diameter is reached. • Steplessly adjustable honing tool pressure feed • Footswitch for manual operating • Built-in honing oil supply system • Manuals. Unfortunately there is no tooling with the machine Condition : very good, universal machine for all sorts of honing tasks ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: used, Delapena Speedhone Model: ‘E’ Electronic (M) Diameter Range: 1.143-79.375mm Ijdpfx Acozlg Dqsastk With lots of tooling Dimensions: 1200 x 1200 x 1600mm high Weight: 410 KGS

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 31.212.003.252, total height: 1,800 mm, total width: 2,000 mm, total length: 2,800 mm, overall weight: 2,750 kg, stroke length: 500 mm, workpiece diameter (max.): 250 mm, power: 3 kW (4.08 HP), For sale is a high-quality Fässler AG D250C gear honing machine, designed for the precise finishing of gears. For decades, Fässler has been recognized as one of the leading specialists in honing technology and is known worldwide for its highest precision and process reliability in gear manufacturing. Iodpfozd T Tisx Acaotk The D250C is ideally suited for the machining of spur gears and transmission components in the automotive, mechanical engineering, and drive technology sectors. Thanks to its robust construction, precise CNC control, and proven Fässler technology, it enables excellent surface qualities, reduced noise levels in the gears, and the highest dimensional and geometric accuracy.

Condition: used, Year of construction: 2005, Type Honanlage Control Nagel In our opinion, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Accessories, tools, and clamping devices shown are only included in the Itjdpsxwdxijfx Acajk scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 50/2150, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. Ijdpfx Aezlxlyjcastk For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 208, workpiece weight (max.): 17 kg, type of input current: AC, spindle speed (min.): 150 rpm, spindle speed (max.): 2,500 rpm, total height: 1,550 mm, total width: 800 mm, total length: 1,450 mm, hone diameter: 50 mm, overall weight: 500 kg, Equipment: rotational speed infinitely variable, For sale is a high-quality Pemamo MDR 140 NC honing machine (year of manufacture 2004) in good and operational condition. The machine is ideally suited for precise internal machining in the micrometer range and has been used reliably. Highlights: • Swiss precision machine (Pemamo) • Very high accuracy • Ready for operation – demonstration possible Itsdpfxjzb Enze Acajk • Robust and durable design The machine is immediately ready for use and can be inspected while powered on after prior arrangement. Sold without warranty, ex works. The machine will be delivered without power and compressed air supply. Payment before collection.

Condition: good (used), Year of construction: 2002, Make: PLEIGER Type: HF 75 / 115 S 30 Control: Siemens Simatic panel Year: 2002 Stroke speed slide step 1 : 4 - 20 M/Min Stroke speed slide step 2 :0,3 - 3 M/Min Rotation chuck step 1 : 300 Rpm and 320 Nm Rotation chuck step 2: 100 Rpm and 1290 Nm Horizontal deep hole honing machine Horizontal tube honing machine Horizontal cylinder honing machine Horizontal pipe honing machine Fine finishing of cylindrical bores Specifications Metric US Standard Drilling depth 11500 mm Power on spindle 55 kW Speeds / ranges 300 Rpm Dimensions (Estimate) Length 25000 mm Width 2000 mm Itedpfx Aokvnc Secaek Height 2000 mm Weight 30000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1977, Technical details: honing diameter: 125 mm stroke: 500 mm throat: - mm distance table - lower edge spindle: 525 mm grinding spindle speed: 26-1200 (12Steps) U/min honing diameter: 30 (min.) mm honing diameter: 165 (max.) mm table adjustment:: 800/150 (max.) mm Isdpfsw Rv Taox Acastk table surface area: 500 x 1000 cm total power requirement: 4,22 kW Weight approx.: 0,15 t dimension machine xH: 1,30 x 1,20 x 2,70 m There is a movable table that moves lengthwise and crosswise. ·There is a movable table that travels in both longitudinal and transverse directions. ·Manual lubrication with cooling. ·The machine is capable of honing. ·Pendulum movement in rapid traverse between two adjustable end positions is possible. *

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Equipment: - oil tank Ø 300 x 600mm - control panel Iedpeu Ngybsfx Acaotk i.D. *

Condition: used, Sunnen brand honing machine, model MBB 1400 EMS. Ijdpfxjza Hd Ie Acaotk

Condition: used, Technical details: honing diameter: 4-31 mm stroke: 350 mm throat: 250 mm Ijdpewx Shkofx Acaetk

Condition: excellent (used), functionality: fully functional, two milling units two motors with a power of 1.5 kW pneumatic shooting device Isdpfxsyhn Rfe Acajtk sanding unit pneumatically actuated pressure shoe maximum belt width: 80 mm motor power: 1.5 kW pneumatic oscillation adjustment of units in two axes stepless feed speed adjustment power supply: 380 V

Condition: used, Year of construction: 2002, honing diameter 200 mm Iedpfxsy Umate Acaotk stroke 600 mm 2 Honing spindles -both with two step expansions mechanic/hydraulic -Rotary table with 4 stations. 2 x 180° or 4 x 90° -air gage measuring made for honing liners with max diameter 120mm Machine is like new because it worked only few months.

Condition: used, Year of construction: 2004, workpiece diameter 125 mm module 4 control SIEMENS SINUMERIK travel -x axis 105 mm travel -y axis 40 mm travel -z axis 500 mm Itsdpfjx Szm Aox Acaek workpiece diameter 17 - 39,5 mm workpiece height 6 - 15 mm Gear Honing Machine | GLEASON-HURTH - ZH 125 The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZH125 | ZH-125

Condition: used, Year of construction: 2004, functionality: fully functional, Well used Sunnen honing machine with Felsomat loading system. Diameter range (INSIDE Ø)¹: Krossgrinding® tools: 5.46 to 32 mm when loaded with CGT tools TurboHone® tools: 3.81 to 32 mm when loaded with MMT tools Iedpfoud Nm Rex Acaotk Connecting rod tools: 53.8 to 63.8 mm when fitted with CRT tools Larger tools: 25.4 to 101.6 mm Workpiece²: 8 to 150 mm Max. Workpiece weight: 2.0 kg Spindle speed range: 250 to 3,700 rpm, adjustable Standard speed: High torque in the low speed range: 20 to 1,000 rpm, adjustable Stroke speed range: 33 to 500 H/min, adjustable Coolant system Pump motor: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l and 11.2 l/min Coolant requirements: Compressed air requirements: 566 l/min at 4.48 bar, 5.52 bar is recommended Temperature range: 0° to 35° C Floor space requirements: (concrete floor) At least 150 mm thick Machine dimensions: L 2946 mm x W 2971 x H 1829 Color: Pearl grey with pewter grey and burgundy decorative stripes Stand weight: 1,579 kg Noise emissions: < 71 dB (A) continuous load, < 75 dB (A) peak load Special features: Automatic set-up: spindle speed, stroke speed, stroke length, infeed value and sparking Automatic finishing: Standard Machine operating modes Automatic: Manual: Series production Individual production Clamping optional

Condition: used, GEHRING Lifehone 600 is a CNC vertical honing machine, engineered for precision, high accuracy and reliability. Capacities: min diameter 3 mm, max 90 mm, max honing length 600 mm; total stroke 600 mm. Technical specs: spindle speeds up to 4500 t/min; stroke/feed speed up to 60 m/min; voltage 3x 400 V 50 Hz; machine weight about 2500 kg; overall dimensions L2600×W2800×H3100 mm. Equipment: coolant system and paper filtration system. Achieves tight tolerances; typical applications include automotive, aerospace, machine tools, medical and watchmaking. Itjdpfoyxnycox Acask

Condition: used, functionality: fully functional, Sunnen MBB-1660G Precision Honing Machine. Make - Sunnen Itjdpfxev Sd Nho Acaek Model - MBB-1660 Job Diameter Range - 1.5 mm to 165 mm Max. Job Length - 406 mm Max. Spindle Speed - 2500 rpm Machine suitable for any material, regular or odd-shaped parts. Good working condition. Please check out our other listings as well.

Condition: good (used), functionality: fully functional, Honing machine SZS 200X500D Itedpfx Aoy D A Niecaek

Condition: excellent (used), Sunnen GH210 Horizontal Hone Year 2010 Max Stroke 8000mm, Spindle Speed:0 - 300 rpm Ijdpfsw U Uh Dsx Acajtk Maximum Spindle Power: 40 Hp (29.83 kW) Maximum Stroker Power: 18 Hp (13.42 kW) Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) I.D. Range: 2 – 24 inches (50.8 – 609.6 mm) O.D. Range: 26 inches standard (660.4 mm) Maximum Part Weight: 8000 kg Approximate Machine Weight: 12,066 kg 400 VAC 50 Hz, 3-Phase (85 A) Siemens Simatic Control,

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 250 rpm, spindle speed (max.): 2,500 rpm, total height: 1,600 mm, total width: 1,200 mm, total length: 1,450 mm, lifting speed: 130 mm/s, hone diameter: 50 mm, overall weight: 830 kg, stroke length: 160 mm, power: 0.75 kW (1.02 HP), This easy-to-use manual honing machine is characterized by high stability and precision, and can be adjusted via stepless electronic speed control. The honing diameter ranges from 3mm to 50mm, with lengths up to 160mm. Easy to operate and simple to adjust. Due to its compact footprint, it is highly flexible in terms of placement. Itedpfxow Upzxj Acajk

Condition: used, honing diameter 99999 mm stroke 99999 mm Iedpfx Aev Tqquocajtk throat 99999 mm Used without warranty

Condition: used, Year of construction: 2000, honing diameter 45 mm stroke 1000 mm 4 spindle honing machine for guns Honing area according to the manufacturer: Diameter 5-45mm Maximum Honing Length 750mm Accessories: Honing tools for diameter: -10mm -12,3mm Itodpfx Acsxddq Eoask -13,3mm -21,1mm