Used Hydr.flat Profile And Bar Shear for sale (25,367)

Condition: used, Year of construction: 1990, Max. punching force: 600 kN Max. shear force: 800 kN Punches 27 mm holes in 16 mm steel Cuts on the flat bar shear up to 400 mm with material thickness of 16 mm steel Hydraulic hold-down device for a sheet metal shear Hnodpfsm T Amuex Ab Ist Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg Very good condition

Condition: used, Year of construction: 2001, functionality: fully functional, Plate shear, manufacturer Peddinghaus Caddy 63 Year of manufacture: 2001 Completely overhauled in 2011 Shearing force: 2000 kN Hnjdpezhndqjfx Ab Ijt Stroke rate, max.: 48/min. (the achievable number of pieces depends on the part length and the equipment of the system) Shearing diameter: 63 mm Material strength: 450 N/mm² Control system: S7-300 Operator panel: MP 277 Touch 8" Weight: approx. 7.9 tons.

Condition: used, 5-way combination profile steel shear, PEDDINGHAUS Type 210 AD/13 Machine No. 529A059, Year of manufacture approx. 1970 Punching unit: Punching force 60 tons Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal Overhang 365 mm Round bar shear: Cutting capacity, round 42 mm Square 38 x 38 mm Flat bar shear: Cutting capacity at shear angle 5° 150 x 13 mm or 200 x 10 mm Hnjdpfsi Duh Iox Ab Iet Blade length 245 mm Profile steel shear: Shearing capacity, angle iron at 90° 110 x 10 mm Shearing capacity, angle iron at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notching up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz - Center-finding device via hand lever and centering device - Mechanical stroke release via hand lever - Flat bar shear equipped with 2° blade - Mechanical clamp on the profile steel shear, round bar shear and on the flat bar shear Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg Good condition

Condition: used, For sheet metal thickness up to: 7 mm Blade length: 175 mm Round material up to: 20 mm Square material up to: 18 mm Hnsdsdp U Apepfx Ab Ijt Space requirement: 1000 x 770 x 690 mm Hand-guided

Condition: good (used), for sheet thickness up to: 8 mm flat iron: 80 x 12 mm Hnedpfx Abotx Uqao Ijt square iron: 20 mm round iron: 18 mm weight approx.: 88 kg space required: 620 x 250 x 380/880 mm high (with/without base frame)

Condition: used, Year of construction: 1974, round bar steel 63 mm square edge steel 55 mm flat steel 100 x 25 mm engine 380 V, 6,3 kW weight ca. 2.450 kg Hedpfxohxzmco Ab Isnt +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Machine designed for inserting plastic bars into the slots of aluminium profiles. The drive system consists of four motorized rotors, preventing the bars from jamming during the insertion process. Hnjdoy Idxmopfx Ab Iot The AS 242 L thermal break profile bar insertion device has been designed to efficiently insert plastic bars into aluminium thermal break profiles, ensuring smooth flow, precise alignment, and reduced cycle times. No. 2 motors, 0.75 kW – 400 V – 50 Hz Operating pressure: 7 bar Bar feed speed: 100 m/min Bar guide travel: transverse 7 – 256 mm, vertical 0.5 – 140 mm Working capacity (bar height): Minimum 10 mm – Maximum 60 mm Automatic ejection of the bar tail Push-button for partial insertion of the bars into the lower profile The transverse adjustment of the bar guide is carried out via a single control equipped with a decimal position indicator. The vertical adjustment of the bar guide is carried out via two independent controls, each equipped with a decimal position indicator. Bar stop can be excluded via push-button control Machine dimensions: 1020 mm (width) x 825 mm (depth) x 1400 mm (height) Machine weight: 235 kg

Year of construction: 2000, condition: good (used), Technical Specification Punching/Shearing system Material * flatsteel length : 6.000 mm width : 50-500 mm thicknes : 5-30 mm Hnodpjq Hu H Rsfx Ab Ijt * angle steel length : 12.000 mm width : 50 x 50 — 150 150 mm thickness : max. 15 mm Punching Machine VPO 1400 Capacity : 1400 kN (140T) Punch diameter/material thickness (max): 32 mm/25 mm Punching in flat- and angle steel : yes Number of punches for flat steel : 4 Number of punches for angle steel : 1 Hydraulic clamping : yes Centring points : yes Mist lubrication system : yes Shear for Flat Steel VPS 1800 Capacity : 1800 kN (180 ton) Width/material thickness (max) : 500 mm/22 mm Hydraulic clamping : yes Mitreshearing : +/- 45° Shear for Angle Steel VHS 1800 Capacity : 1800 kN (180 ton) Suitable for Angle : 50x50x5 up to and included 150x150x15 Hydraulic clamping : yes Punching Unit for Angle Flange Capacity : 600 kN (60 ton) Punchdiameter/material thicknes (max.) : 32 mm / 15 mm Numbering Unit Number of disks : 4 pcs Number of characters : 36 pcs Character hight : 10 mm Number of characters per code : standard max. 16 Inprint : approx 1 mm Electrical power : 3 x 415V AC + N + PE, 50 CPS

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Kaltenbach KPS 506 CNC Flat Bar / Angle Punching / Shearing Line – Year 2007. 500mm Capacity Flat Bar. 160mm x 160mm Angle. 3 head Punch. Hsdpfxjzcqnio Ab Isnt Horizontal punch. 6 metres Gripper feed. Mitre Shearing.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 5053-4053040H002, power: 11 kW (14.96 HP), Bar shears Peddinghaus Caddy 50 used, very good condition Hedpfx Ajtuknyob Iont year of construction 1999 Technical data: Shearing force/diameter (max.): 900 kN/50 mm Drive power: 11 kW Equipment/special features: bar magazine, 6 m, length stop, safety device

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: 5053-4053142274002, power: 30 kW (40.79 HP), Bar shears, make Peddinghaus, type Caddy 63 Technical data: Shearing force/diameter (max.): 2000 kN/63 mm Drive power: 30 kW Equipment/special feature: bar magazine, 6 m Hedpstukpajfx Ab Ient

Condition: excellent (used), functionality: fully functional, power: 11 kW (14.96 HP), Steel bar shears make Schubert, type STS 100 Used, very good condition Hnedotukqqjpfx Ab Iot Technical data: Shearing force/diameter (max.): 1000 kN/52 mm Drive power: 11 kW Equipment/special features: bar magazine, 6 m, length stop 650 mm, safety device

Condition: ready for operation (used), functionality: fully functional, control type: manual, actuation type: hydraulic, Geka (Spain) Hydraulic Punching, Shearing, and Notching Machine Model: Hydracrop–55/110A Year of Manufacture: 2001 Flat Bar Shear Capacity: 300 x 15 mm / 200 x 20 mm Blade Length: 305 mm Square: 25 mm Working Height: 880 mm Angle Shear Capacity: 1100 kN Deformation-free Angle Iron: 120 x 120 x 10 mm Angle Iron 45° Shear: 70 x 70 x 7 mm Round and Square Bar Shear Round Steel: 40 mm Square Steel: 40 mm Notcher Sheet Thickness: 10 mm Angle Iron: 100 mm Notch Depth: 90 mm Notch Width: 42 mm Punching Station Capacity: 550 kN Maximum capacity with quick-change system: Ø 40 x 10 mm / Ø 20 x 20 mm Throat Depth: 250 mm Stroke Length: 60 mm Working Height: 1085 mm General Specifications Number of strokes per minute at 20 mm stroke: 25 Power: 3 kW Net weight: 1320 kg Gross weight: 1518 kg Dimensions (L x W x H): 1600 x 1100 x 2000 mm Machine Details - 2 cylinders: one for the punching side, one for the shearing side - Punching unit with quick-change system - C-frame die holder + extra support - Nipple and die up to Ø 40 mm selectable - Flat bar shear incl. support table and 45° and 90° guides - Angle shear - Round and square bar shear (suitable for mounting U and I profiles as well) - Rectangular notcher - Emergency stop - Key switch for notcher safety - Selector switch for deep or shallow punch/shear operation - Selector switch for foot pedal / back gauge - Stroke adjustment for punch and shear side - 2 foot pedals - Scrap collection tray for punch slugs - Dutch instruction manual Includes: Punch table incl. back stops Notching table incl. back stops Electric length stop 1000 mm 30 sets of punch nipples Price of the Geka Hydraulic Punch/Shear/Notch Machine: €16,500 Machine is as new, original paint, like new, original finish Delivery conditions: Delivery time: from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Hodpfxsyxpawe Ab Ijnt Machinehandel De Leeuw BV cannot be held liable for discrepancies between the technical specifications in this offer and the actual machine, accessories, and/or parts. Machines, accessories, and parts are sold as-is and as known to the buyer. We cannot provide a warranty for used machines, accessories, and parts. Delivery terms: Delivery time: ex stock, excluding VAT Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that stocks and sells primarily used Kardex Remstar automatic lift and rotating warehouse systems. We install and/or dismantle these systems safely with VCA-certified engineers and have been doing so for more than 33 years. Best regards, Antoine de Leeuw Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands VAT No.: NL800103026B01 Chamber of Commerce Tilburg 18034279

Condition: ready for operation (used), Diameter range: 52 mm – 65 mm Height range: Production capacity: up to 3000 c.p.h. Hsdpfx Absyv An As Ient No. of heads: 18 Tooling for approx. 52 mm (202) Filler and seamer available separately or together

Condition: excellent (used), Standard boiler Duisburg 10000kg/h 15,7 Bar +Weishaupt gas burner. Already dismantled ,Ready for collection Hnsdpfx Abjnwit Sj Ist

Condition: used, Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank -Content: 11.5 ltr -permissible operating pressure: 17 bar -Dimensions: 270/250/H480 mm -Weight: 8 kg Hedpfx Ajd Atx Eob Isnt

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, 1 used steam boiler ----- - with corrugated flame tube and dished ends - Manufacturer: STANDARD Heating surface approx.: 240 sqm Capacity: 13.4 t/h Previous operating overpressure: 14.0 bar Hjdpfx Abjxtndne Isnt Test overpressure: 18.2 bar Water content approx.: 18,160 l Year of manufacture: 1988 Equipped with Saacke natural gas burner type DG 80, gas control line, control cabinet, feed water pump, and existing coarse and fine fittings.

Condition: new, input voltage: 400 V, total width: 1,200 mm, GAS STOVE – BARTSCHER 6 Burners + Electric Oven | BRAND NEW | NEVER USED For sale: a brand new, never used professional gas stove from the renowned brand Bartscher. Ideal for restaurants, bakeries, fast-food outlets, and all professional kitchens. ✅ Key Features: 6 high-performance gas burners Integrated electric oven with large capacity Stainless steel construction – durable and easy to clean Professional build quality for continuous operation Perfect for all types of commercial gastronomy Original Bartscher product known for long-lasting performance Condition: NEW Hnedpfx Abox Aip De Ist

Condition: used, BAR PEELING MACHINE manufactured by LANDGRAF Model T100 Working range : Diameter: 20 – 100 mm (finished diameter) Tolerance: h9 Bar Length: 1.900 – 6.500 mm Peeling head: 320 – 2.400 rpm Speed: up to 40 m/min Complete line with : Loading table with chain transfer Entry Roller Way, adjustable Exit Roller Way, adjustable Electric equipment Hydraulic power pack Hnsdpfsymb U Uox Ab Ijt Bar diameter: 20 – 100 mm (finished diameter) Tolerance: h9 Bar Length: 1.900 – 6.500 mm Peeling head: 320 – 2.400 rpm Speed: up to 40 m/min

Condition: used, maximum load weight: 28,598 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2012, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,770 mm, loading space volume: 94 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2012, Equipment: ABS, 3 - Axle Schmitz Cargobull SCS 24/L-13.62 EB VIN: 3162835 Chassis / Components: Hodeygzqvjpfx Ab Iont * Air suspension // Raise and lower * Lift axle * Jost support legs * 3 x Rotos axle with disc brakes * Tires: 385/65 R22.5 * Remaining tread depth: Front approx. 0/10% Rear approx. 30% Middle approx. 50% * Pallet box * LBW Bär * Load capacity 2,000 kg Superstructure: * Tautliner * Certificate EN 12642 Code XL * VDI 2700 * Pallet stop on both sides * Edscha * Side curtains * Aluminum slats * Multilock * RSAB = Roof Safety Air Bag Weights: * Gross vehicle weight: 36,000 kg * Tare weight: 7,402 kg * Payload: 28,598 kg Other: * German vehicle * 1 previous owner * New inspection (HU) upon request ---- New main inspections / safety checks or weight reductions/increases are available upon request. We will gladly assist you in obtaining export/transfer registration plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. All rights reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. See for yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with organizing special transports. Daily permits / export registration plates We will gladly help you obtain export registration plates / short-term registration plates.

Condition: used, mileage: 7,14,112 km, power: 315 kW (428.28 HP), axle configuration: 6x2, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, total width: 25,500 mm, total height: 37,000 mm, Year of construction: 2015, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (phone number available upon request). Mercedes-Benz Antos 2543 L 6x2 refrigerated box truck. Hnedpfx Abjy T Uuio Iet A1A front axle, air-suspended; A1D front axle, 8.0 t; A1Z front axle, angled design; A2E rear axle, crown wheel 440, hypoid, 13.0 t; A4Y trailing axle, 7.5 t, steered, unladen, liftable; A5C axle ratio i = 2.733; B1B electronic braking system with ABS and ASR; B1E electronic compressed air supply unit, high version; B1F heater, electronic compressed air supply unit; B2A disc brakes, on front and rear axles; B3H secondary water retarder; B4A condensate monitoring, for compressed air system; B4M compressed air tank, steel; B5A trailer brake, 2-line, brake connections on the left; B5L trailer brake connection on the rear, Duo-Matic+Standard; C0Z frame overhang 1950 mm; C2P wheelbase 4600 mm; C5I fastening parts, for platform body; C5P frame bolted; C6C steering, 1-circuit; C6J steering assist pump, unregulated; C6U additional stabilizer, rear/trailing axle; C7F front underrun protection (ECE), aluminum; C7J battery carrier, batteries side by side; C8F fender, for chassis transport; C8I splash guard (EC), front; C9Y omission of rear underrun protection (ECE); D0L smoker's package; D0S compressed air connection, in the cab; D1C driver's air suspension seat, comfort; D1N passenger's functional seat; D2N seat back, release, driver's seat; D3I bunk, lower; D3Q seat cover, velour; D4Y sun visor, side, driver's side; D6F air conditioning; D6I waste heat recovery; D6M auxiliary hot water heater, cab; D7G storage compartment lid, driver and passenger side; D7P low storage tray, on the engine tunnel; D8A roof hatch/ventilation flap, roof; E0D battery sensor, company Hella; E1C batteries 2 x 12 V/220 Ah, maintenance-free; E1M generator 28 V/150 A; E3L socket 24 V/15 A, passenger footwell; E4B interface, Fleet Management System FMS; E4C additional functions, for body manufacturer; E4W starting aid, speed limitation 30 km/h; E5A switch No. 1 for external body electrical system; E6A trailer socket 24 V, 15-pin; E7F cable remote control for air suspension; E9H preparation for control system for loading platform; F0F side module, N3 vehicle; F0X mirror cover, road vehicle; F1O M-cab ClassicSpace, 2.30 m, tunnel 320 mm; F3B cab mounting, comfort, steel-sprung; F3W cab tilting device, mechanical-hydraulic; F4H cab rear wall, without window; F4X external storage compartment flap, left; F5C air deflector, without base panel, lockable; F5L sun visor, exterior, transparent; F5Y A-pillar trim; F6C windshield, tinted; F6I front mirror, heated; F7B bumper, corners made of steel; F7C bumper, center part with towing eyes; F7X cab entry, left/right, fixed; F8B 2 remote control keys; F8E locking system, with central locking; F8F comfort locking system; G0U driving program economy; G2B transmission G 211-12/14.93-1.0; G5A single-plate clutch; G5G Mercedes PowerShift 3; I2G tires, tubeless, 315/80 R 22.5, front/front lift axle/rear lift axle; I2H tires, tubeless, 315/80 R 22.5, rear; I4C wheel formula 6x2 ENA; I6I vehicle production plant, Wörth; I6X air suspension, rear axle; J1C instrument cluster, 12.7 cm, with video function; J1R tachograph, digital, EC, speed, ADR; J1S tachograph manufacturer VDO; J2D radio/navigation system Bluetooth, comfort; J2K speakers, 2-way system; J9B preparation for telematics; J9C preparation for Fleetboard for J3D; J9D preparation for toll system; J9J preparation for reversing camer

Condition: used, mileage: 7,36,739 km, power: 315 kW (428.28 HP), axle configuration: 6x2, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, total width: 25,500 mm, total height: 37,000 mm, Year of construction: 2015, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. [phone number]). Mercedes-Benz Antos 2543 L 6x2 beverage delivery truck. A1A front axle with air suspension, A1D front axle 8.0 t, A1Z front axle, dropped axle design, A2E rear axle, crown wheel 440, hypoid, 13.0 t, A4Y trailing axle, 7.5 t, steered, unladen, liftable, A5C axle ratio i = 2.733, B1B electronic braking system with ABS and ASR, B1E electronic compressed air supply unit, high, B1F heater, electronic compressed air supply unit, B2A disc brake, on front and rear axles, B3H secondary water retarder, B4A condensate monitoring, for compressed air system, B4M compressed air tank, steel, B5A trailer brake, 2-line, brake connections on the left, B5L trailer brake connection at the rear, Duo-Matic+Standard, C0Z frame overhang 1950 mm, C2P wheelbase 4600 mm, C5I fastening parts, for platform body, C5P frame bolted, C6C steering, 1-circuit, C6J steering power pump, unregulated, C6U additional stabilizer bar, rear/trailing axle, C7F front underrun protection (ECE), aluminum, C7J battery carrier, batteries side by side, C8F mudguards, for chassis transport, C8I splash guard (EC), front, C9Y omission of rear underrun protection (ECE), D0L smoker's package, D0S compressed air connection, in the cab, D1C driver's air-suspended seat, comfort, D1N co-driver's functional seat, D2N seat back, release, driver's seat, D3I bunk, lower, D3Q seat cover, velour, D4Y sun visor, side, driver's side, D6F air conditioning, D6I residual heat utilization, D6M auxiliary hot water heater, cab, D7G storage compartment cover, driver's and co-driver's side, D7P low storage tray, on engine tunnel, D8A roof hatch/ventilation flap, roof, E0D battery sensor, Hella, E1C batteries 2 x 12 V/220 Ah, maintenance-free, E1M generator 28 V/150 A, E3L socket 24 V/15 A, co-driver's footwell, E4B interface, Fleet Management System FMS, E4C additional functions, for body manufacturer, E4W starting aid, speed limiter 30 km/h, E5A switch no. 1 for external body electrical system, E6A trailer socket 24 V, 15-pin, E7F cable remote control for air suspension, E9H preparation for tailgate control, F0F side module, N3 vehicle, F0X mirror cover, road vehicle, F1O M cab ClassicSpace, 2.30 m, tunnel 320 mm, F3B cab mounting, comfort, steel-sprung, F3W cab tilting device, mechanical-hydraulic, F4H cab rear wall, without window, F4X external storage compartment flap, left, F5C air deflector, without base trim, lockable, F5L sun visor, external, transparent, F5Y A-pillar trim, F6C windshield tinted, F6I front mirror, heated, F7B bumper, corners made of steel, F7C bumper, center part with towing loops, F7X cab entry left/right, fixed, F8B 2 remote control keys, F8E locking system, with central locking, F8F comfort locking system, G0U driving program economy, G2B transmission G 211-12/14.93-1.0, G5A single-plate clutch, G5G Mercedes PowerShift 3, I2G tires tubeless, 315/80 R 22.5 front/front load axle/rear load axle, I2H tires tubeless, 315/80 R 22.5 rear axle, I4C wheel arrangement 6x2 ENA, I6I vehicle production plant Wörth, I6X air suspension, rear axle, J1C instrument cluster, 12.7 cm, with video function, J1R tachograph digital, EC, speed, ADR, J1S tachograph manufacturer VDO, J2D radio/navigation system Bluetooth, comfort, J2K speakers, 2-way system, J9B preparation for telematics, J9C preparation for Fleetboard for J3D, J9D preparation for toll collection, J9J preparation for reversing camera, K0T main tank, lef Hnsdpfxsy T Uucj Ab Iot

Condition: used, mileage: 2,97,305 km, power: 220 kW (299.12 HP), first registration: 07/2020, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 40 m³, loading space length: 7,400 mm, loading space width: 2,460 mm, loading space height: 2,190 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, M-Benz Atego 1630 beverage box truck with Bär loading platform VIN: 448080 Chassis / Components: * Wheelbase: 5,360 mm * Leaf/Air suspension * Tires: 305/70 R19.5 * Remaining tread depth: 1st tire: 40-50%, 2nd tire: 60% * Diesel tank * AD-Blue tank (plastic) * Two-line system * ABS / 15-pole * 2x fire extinguisher holders Cab: * Classic Space S * 2 seats * Spoiler * Air conditioning * Radio * Bluetooth, AUX * Hands-free system * Cruise control * Tachograph 4.1 DTCO * Reversing camera Body: * Zikun Fahrzeugbau beverage box truck * Bär BC1500 S4B4 * Max. 1,500 kg * Support legs on both sides * 2x cargo securing bars per side * 4x cargo securing bars at the top and bottom * 4x cargo securing beams * Swivel wall on both sides * Loading area dimensions L x W x H: 7.40 m x 2.46 m x 2.20 m * Volume: approx. 40 m³ Engine / Transmission: * 300 hp / 220 kW // 7,698 cm³ // Euro 6d * Engine brake * Automatic transmission Weights: * Gross vehicle weight: 16,000 kg * Unladen weight: 8,350 kg * Payload: 7,650 kg Other: * German vehicle * 1 previous owner * New MOT (technical inspection) possible upon request ---- New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates; furthermore, transport of your purchased vehicles within Germany is possible. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing and typographical errors, changes, prior sale, and mistakes; subject to change! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide range of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in buying or selling vehicles. Convince yourself! Our services for you: Loading of vehicles We will gladly help you load your purchased vehicles. Organization of special transports Hedpfx Asz Al Tfob Ijnt We will gladly help you organize special transports. Daytime license plates / export license plates We will gladly help you obtain export/short-term license plates. Handling of customs formalities We will gladly help you handle customs matters.

Condition: used, mileage: 2,97,305 km, power: 220 kW (299.12 HP), first registration: 07/2020, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 40 m³, loading space length: 7,400 mm, loading space width: 2,460 mm, loading space height: 2,190 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, M-Benz Atego 1630 beverage box truck with Bär loading platform VIN: 448080 Chassis / Components: * Wheelbase: 5,360 mm * Leaf/Air suspension * Tires: 305/70 R19.5 * Remaining tread depth: 1st tire ~40-50%, 2nd tire 60% * Diesel tank * AD-Blue tank, plastic * Two-line brake system * ABS / 15-pin connector * 2x Fire extinguisher bracket Cab: * Classic Space S * 2 seats * Spoiler * Air conditioning * Radio * Bluetooth, AUX * Hands-free system * Cruise control * Tachograph 4.1 DTCO * Rear view camera Body: * Zikun Fahrzeugbau beverage box * Bär BC1500 S4B4 * Max. 1,500 kg load capacity * Support legs on both sides * 2x Load securing bar per side * 4x Load securing bar on top and bottom * 4x Load securing beam * Swivel wall on both sides * Loading area dimensions L x W x H: 7.40m x 2.46 m x 2.20 m * Volume: approx. 40 m³ Engine / Transmission: 300 hp / 220 kW // 7,698 cm³ // Euro 6d * Engine brake Hjdpoz Al S Usfx Ab Isnt * Automatic transmission Weights: * Gross vehicle weight: 16,000 kg * Tare weight: 8,350 kg * Payload: 7,650 kg Other: * German vehicle * 1 previous owner * New technical inspection (TÜV) available upon request ---- New technical inspections / safety checks or weight reductions/increases are available upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for printing & typographical errors, changes, prior sale, and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl on the Rhine. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide range of vehicles can be found on an area of 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in buying or selling vehicles. See for yourself! Our services for you: Loading of vehicles We will gladly help you with the loading of your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day license plates / Export license plates We will gladly help you obtain export/short-term license plates. Handling of customs formalities We will gladly help you with the handling of customs matters.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WMAN14ZZ1KY400782, mileage: 4,72,800 km, power: 184 kW (250.17 HP), first registration: 08/2019, fuel type: diesel, empty load weight: 6,315 kg, maximum load weight: 5,675 kg, overall weight: 11,990 kg, tire size: 265/70 R17,5, tire condition: 80 %, axle configuration: 4x2, next inspection (TÜV): 07/2027, fuel: diesel, fuel tank capacity: 250 l, brakes: intarder, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 9,360 mm, total width: 2,550 mm, total height: 3,160 mm, permissible axle load (axle 1): 4,400 kg, permissible axle load (axle 2): 8,400 kg, loading space length: 7,470 mm, loading space width: 2,470 mm, loading space height: 2,070 mm, Year of construction: 2019, Equipment: ABS, AdBlue, Android Auto, EBS, air conditioning, blind spot assist, cruise control, electronic stability program (ESP), full service history, lane keeping assist, navigation system, non-smoking vehicle, power assisted steering, seat heater, soot filter, traction control, truck registration, For sale is a MAN TGL 12.250 with a box body from Grimm+Partner Fahrzeugbau. The vehicle has a BÄR tail lift with a load capacity of 1500 kg. The vehicle offered has been regularly serviced at MAN and has a new technical inspection. Vehicle equipment: - TYPE: TGL 12.250 - Registration date: 08/01/2019 - Mileage: approx. 472,800 km - VIN: WMAN14ZZ1KY400782 - Technical inspection: 07/27 - Emissions test: 01/27 - Tachograph test: 07/27 - Emission class: Euro 6 - Power: 250 hp - Front axle tires: 265/70R17.5, tread depth: approx. 90%, suspension: leaf spring - Rear axle tires: 265/70R17.5, tread depth: approx. 70%, suspension: air - Spare wheel NEW - Internal dimensions of the body: Length = 7470 mm, Width = 2470 mm, Height = 2070 mm - Unladen weight: 6315 kg - Gross vehicle weight: 11990 kg - Payload: 5675 kg - Tail lift BÄR 1500kg - Automatic transmission - Automatic climate control - Reversing camera - Side assist camera - Navigation - Lane keeping assistant - Adaptive cruise control - Cruise control - Electric windows Hsdpfx Abezrmcge Isnt - Electric mirrors - Central locking - Seat heating - 1 air-suspended seat - DAB radio - Hands-free system - Radio - Additional headlights PLEASE NOTE: Our vehicles are generally offered WITHOUT a new technical inspection, without a new emissions test, and without a new safety inspection!!! These can be carried out for an additional charge. Vehicles sold to non-EU countries are sold only with a VAT deposit!!! Vehicle registration, license plates, customs license plates... can be arranged for an additional charge!!! Sale is exclusively to commercial businesses, dealers, or for export!!! Subject to change, errors and omissions excepted. Financing available upon request. We can also arrange customs clearance for you. Opening hours: Mon-Fri 8 am - 2 pm or by appointment Price is NET/negotiable An invoice with VAT will be issued upon sale. Vehicle location: Im Gewerbepark 11 99441 Umpferstedt