Used Hydrap Hpskz 63 for sale (3,998)

Year of construction: 1990, condition: used, pressure 100 t throat 260 mm stroke 300 mm table-size 500 x 500 mm ram head dimension 650 x 500 mm dayligth 700 mm oil volume 600 l capacity of ejector in table 40 t return capacity 13 t total power requirement 22 kW Guodpsb U Hvaefx Anxeb weight of the machine ca. 7 t dimensions of the machine ca. 2.07 x 2.48 x 3.3 m - Ejector in the table, pressure 40 t, stroke 100 mm - Laterally movable work area protection with ESPE (light barrier) this with cycle operation - Cooling, behind the machine, backwater boiler (beige) air cooler (grey- blue), along with complete piping and control etc. - Press safe for unrestricted manual insertion operation - Documentation in german available

Condition: used, Year of construction: 1993, pressure:160 t throat:360 mm stroke:300 mm table-size:1500 x 700 mm dimension of ram:1200 x 560 mm return capacity:40 t stroke speed:400 m/min stroke speed - under load:16 - 42 Hub/min stroke speed -return:350 mm/min Gjdpfeh Ra R Iex Anxsub die-cushion pressure:630 kN die cushion stroke:100 mm total power requirement:42 kW weight of the machine ca.:19,5 t pressure of ejector:50 kN ejector stroke:50 mm

Condition: good (used), Year of construction: 1990, 1. machine data Manufacturer: Hydrap Pressen Maschinenbau GmbH Designation: Hydraulic pressure press Type: HPDZb 250 M-No.: H40/ 6323 Year of construction: 04/1990 Weight: 30 tons Depth x width x height: 4 x 4.5 x 6 m Gedjt D Eivjpfx Anxjub 2. connection data Mains voltage: 380V Frequency: 50 Hz Output: 55 kW 3. technical data Distance between the stands: front 1350 mm Lateral 720 mm Nominal force: 2500 kN Number of pressure pistons: 1 Clamping table: 1,300 x 1,000 mm Stroke adjustment: 450 mm 4. general The drawing cushion is defective and must be repaired. The machine is available immediately. The machine has been disconnected from the mains as it had to be relocated due to conversion work. The sale is ex works: dismantling, removal, loading and transportation are at the buyer's expense.

Condition: excellent (used), Year of construction: 1975, -KOM 1002-

 Offered here is a press of the company HYDRAP of the type HKPS8000. Technical data: Type: HKPS8000
 Year of manufacture: 1975
 effective stroke: 200mm throat: 250mm (at center) table size: 320x320mm Gsdpfxjg Ufvbe Anxoub Installation height: approx. 345mm Voltage: 380V 
Perm. load: 80000N
 Drive type: HYDR Drive power: 1,5kW Oil quantity: 60l Oil viscosity: 3°E

Condition: used, Year of construction: 1993, Force: 100 tons Max. distance between columns: 1400mm Stroke: 250 mm Windows: 400mm Daylight: 400mm Table: 1250x1100mm Ram: 1250x1100mm Speed fast down: 400mm/sec. Gjdpfec Uwx Dsx Anxsub fast uo: 330mm/sec. work: 24-43 mm/sec. Power: 33kW Weight: 10.000 kilos Height: 3300mm Width: 1700mm Depth: 1800mm 2-Hand operation Cutting dampers

Year of construction: 1988, condition: good (used), Force: 160 tons Windows: 600mm Daylight: 750mm Table: 1400x900mm Ram 1400x900mm Gsded Rlm Rspfx Anxjub Speed down 400mm/sec. up 300mm/sec. work 19-50mm/sec. Stroke: 400mm Requested power: 45 KW Weight 23 tons Height: 4300mm Machine is floorstanding Siemens S5 control 3 cushions in bed

Condition: good (used), Year of construction: 2008, Manufacturer: EBG-TECH Type: BMW N-63 Year: 2008 Gsdpfef Ecwzox Anxjub Max. disk diameter: 300 mm Overall size: 1900 x 1200 x 2900 mm Weight: 1750 kg

Condition: excellent (used), CATALOG NUMBER 7051 TECHNICAL SPECIFICATIONS - Wheel diameter: 630 mm - Table dimensions: 890x710 mm - Table adjustable in angle - Motor: 3 kW - Max cutting height: 240 mm - Throat (band to frame): 570 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 1250x800x2300 mm - Weight: 681 kg Gusdpfjy R A E Dsx Anxjb ADVANTAGES – Manufactured in Poland – Very good condition – Used saw Net price: 7,900 PLN Net price: 1,880 EUR depending on the rate 4.2 EUR (Prices subject to change in case of significant fluctuations)

Condition: excellent (used), belt driven Gedpfx Aeh Tfqhsnxsub Flow rate 14500 m3/h Negative pressure 3091 Pa Motor power 22 kW Speed ​​2340 rpm Suction DM 500 mm Outlet DM 400 x 500 mm Dimensions L x W x H = 1800 x 1300 x 1250 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Year of construction: 2026, CORMAK CNC BASE 63x2000 Hydraulic CNC Press Brake The CORMAK EUROBEND series press brakes are advanced machines designed for sheet metal forming and bending. During the ram cycle, the machine adapts to the required geometric profile, ensuring precise and repeatable bending results. These machines are widely used in industries such as electromechanical manufacturing, light industry, agriculture, shipbuilding, automotive, and aerospace sectors. Thanks to properly selected punches and dies combined with modern CORMAK CR-41 controllers, these machines can handle even the most demanding bending operations. Main Features Safe bending speed up to 10 mm/s 2 front support arms ensuring stability during bending operations Automatic back gauge adjustment (X-axis) Automatic beam adjustment (Y-axis) Manual finger height adjustment (R-axis) AMADA-type quick punch clamping system for fast tool changes Segmented punches Four-sided die allowing bending of various sheet thicknesses Bosch Rexroth hydraulic system High-quality electric motor Technical Specifications Parameter Value Maximum Sheet Thickness (S235 steel) up to 4.0 mm Nominal Press Force 630 kN Maximum Bending Length 2000 mm Throat Depth 250 mm Maximum Ram Stroke 120 mm Maximum Opening Height 370 mm Distance Between Side Frames 1650 mm Back Gauge Travel 600 mm Motor Power 5.5 kW Length 2155 mm Width 1500 mm Height 1850 mm Weight 3300 kg Precision and Productivity The CNC BASE 63x2000 press brake is designed for efficient and highly accurate sheet metal bending. Automatic control of the X and Y axes improves repeatability, reduces setup time, and increases productivity during serial production and custom fabrication tasks. The segmented punch system and four-sided die provide flexibility for processing different part geometries and material thicknesses while minimizing tooling changeover time. Reliable Hydraulic System and Modern Control The machine is equipped with a premium Bosch Rexroth hydraulic system, ensuring smooth operation, durability, and precise pressure control. Combined with the advanced CORMAK CR-41 controller, the press brake delivers intuitive operation and accurate positioning for demanding bending applications. Applications The CORMAK CNC BASE 63x2000 is ideal for: sheet metal fabrication workshops, Guodpfx Ansy Sgqmjxeb industrial production facilities, automotive component manufacturing, agricultural machinery production, shipbuilding industry, aerospace sector, custom metalworking operations.

Condition: new, Year of construction: 2026, Cormak press brakes are advanced devices that enable precise bending of sheet metal thanks to appropriately selected punches and dies. Our offer includes models equipped with DELEM DA-53TX controllers as standard and optionally DELEM DA53T, DA-58T, DA-66T, DA69T and CYBELEC 12 controllers, which provide a wide range of functions, enabling the implementation of the most demanding bending tasks. Main Features: Front supports: 2 pieces on linear guides, ensuring stability during bending operations Gujdpfsy Sgp Njx Anxeb Y1, Y2 axis adjustment: automatic Rear stop adjustment (X axis): servo drive on encoders R axis adjustment: servo drive on encoders Automatic adjustment of the deflection arrow Double-sided punch mounting: quick assembly type AMADA, enabling quick tool changes Technical parameters Max. thickness of bent sheet metal (S235) up to 6.0 mm Nominal pressure 1300 kN Maximum length of bent sheet metal 3200 mm Depth of cut in beams (throat) 320 mm Maximum stroke of moving beam 120 mm Maximum opening height 390 mm Distance between beams 2700 mm Rear bumper departure 600 mm Engine power 9.5 kW Length 3870 mm Width 1550 mm Height 2460 mm Weight 7400 kg Additional equipment available. Please contact the seller.

Condition: used, Year of construction: 1979, pressure 63 t stroke 200 mm throat 320 mm dayligth 450 mm table surface area 750 x 600 mm die cushion capacity 6,5 t die cushion stroke 80 mm die cushion area 240 mm table height over floor 800 mm ram surface 500 x 450 mm feed down 300 mm/s feed up 300 mm/s working feed 50 mm/s oil volume 380 l power requirement 12,0 kW Weight 6,5 t dimensions of the machine ca. 1,3 x 2,0 x 2,75 mxmxm Gjdpfoy Rur Aex Anxsub SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 2350 mm distance table/ram, max. stroke up, adjustment up 1200 mm distance between cutting impact cushioning 1600 mm Distance table/ram, stroke up 1200 mm stroke 800 mm table surface area 2060 x 1260 mm table height over floor 750 mm Die cushion pressure in table 100 t Die cushion stroke in table 400 mm die cushion area 1250 x 1000 mm side window 780 mm ram surface 2200 x 1500 mm Gusdpjvuugvsfx Anxsb Capacity of ejector in ram 63 t speed down 500 mm/s speed up 310 / 410 mm/s working speed 20 - 73 mm/s quantity of oil 3900 l power requirement 80,0 + 45,0 kW weight 55,0 t Dimensions (WxDxH) 4,6 x 2,7 x 7,2 m Height above floor 6,0 m Height below floor 1,2 m with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, hydraulic ram interlocking

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm Gedpfx Asy Ruqxonxeub hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1961, pressure 063 t throat 280 mm stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 620 x 500 mm hole in the table 230 mm table height over floor 800 mm ram surface 310 x 255 mm ram adjustment 63 mm power requirement 5,5 kW weight 3,95 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m Gusdpfx Ajyx Imcjnxeb with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1970, Pressure 063 t throat 250 mm stroke 8 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 700 x 500 mm hole in the table 250 mm table height over floor 800 mm passage to the back 320 mm ram surface 450 x 280 mm ram adjustment 63 mm power requirement 4,0 kW Gusdpfxeynmn No Anxeb weight 4,5 t Dimensions (WxDxH) 1,6 x 2,0 x 2,8 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work

Condition: used, Year of construction: 1984, turning diameter over cross slide: 1,600 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 35,000 mm, workpiece weight (max.): 63,000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem construction on one bed, with left and right headstocks Faceplate double tailstock left and right Double carriage Steady rest included Roller rest included Operator panel with scales requires attention and replacement Motorized tailstock for each side (left and right) 3-bed way design Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Industries served: Godsynky Aspfx Anxjub - Shipyards - Propeller shaft manufacturing - Hydraulic cylinder shafts - Camshafts - Defence & Aerospace - Rolls and shafts for steel mills - Crankshafts Specifications Metric / Imperial Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: Ø 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Max spindle speed: 180 rpm Feed X-axis: 5,000 mm/min Feed Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 776 operating hours Equipment and technical data: - Motor: 18.5 kW - Rotor diameter: 248 mm - Hopper opening: approx. 620 x 800 mm - Standard screen - 30 cutting knives - Screen perforation: 20 mm - Extraction nozzle: 160 mm Gsdpsx H U Ngsfx Anxoub Dimensions: approx. 1730x1160x1650 mm Weight: approx. 1100 kg Availability: short-term Storage location: Röllbach

Condition: used, total length: 4,500 mm, total width: 1,600 mm, total height: 1,500 mm, Colour: Grey Empty weight: 5.000 kg Price: On request - Documentation available: No - CE certificate present: No - Serial number: 0440922 - Drive system: Conventional - Power [kW]: 18.5 - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Carriage turning diameter [mm]: 400 - Distance between centres [mm]: 3000 - Bed width [mm]: 580 - Spindle bore [mm]: 82 - Min. spindle speed [rpm]: 9 - Max. spindle speed [rpm]: 1120 - Options: Three-jaw chuck, Four-jaw chuck - Transport dimensions: 4500mm x 1600mm x 1500mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information Guodex Ryv Tjpfx Anxjb VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 1.5 kW 2770 rpm at 50 Hz -Hole: Ø 30 mm -Motor mounted on guides -Quantity: 1 motor available with left-hand thread -Price: per piece -Weight: 20 kg/piece Gusdpfxob A Nmds Anxsb

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: V00311, bending radius (max.): 135 mm, working height: 1,100 mm, workpiece weight (max.): 2,500 kg, tool diameter: 60 mm, No reserve price – guaranteed sale to the highest bidder! Gsdpfxjy Sma Uo Anxoub TECHNICAL DETAILS Workpiece weight (max.): 2,500 kg Bending capacity: 63 x 4 mm Usable bending length with physical tube stop: 3,000 mm Working height: 1,100 mm Tool diameter: 60 mm Maximum bending radius: 135 mm MACHINE DETAILS Voltage: 400 V ±10 % Voltage deviation: max. -15 % for 1 minute Frequency: 47–63 Hz Installed power NC1: 9.70 kW Installed power NC2: 9.88 kW Rated current: 31 A Auxiliary voltage: 24 V DC CNC voltage: 24 V DC Electrical protection class: IP55 Dimensions (L x W x H): 4,581 x 1,093 x 1,372 mm

Condition: ready for operation (used), Heidenhain UE 212 ID 313501-63. The quoted price covers only the repair analysis of your component, which you can send to us. Following evaluation of your component, you will receive a quotation detailing the actual repair costs. If you approve the repair, the analysis fee will be waived. During the repair process, your component will be thoroughly overhauled and comes with a 3-month warranty from us. Gedpfx Ansy Nqyyoxoub

Condition: ready for operation (used), ATB AF 63/4B-7 motor with SKF 143 central lubrication and 143-011-151 gear pump, used, in good condition, 100% functional, delivery as per photos. Godpfx Aney Nn Hwjxjub

Condition: ready for operation (used), Heidenhain UE 211 ID 313504-63 The costs cover only the repair analysis of your component, which you can send to us. After our inspection, you will receive a quotation with the actual repair costs. Once you approve the repair, the analysis costs will be waived. Your component will be completely overhauled as part of the repair process and will receive a 3-month warranty from us. Gjdpjy Nqw Ejfx Anxjub

Condition: used, Year of construction: 2001, x-travel 630 mm y-travel 500 mm z-travel 500 mm control Heidenhain TNC 430 spindle speed: 10000 U/min power capacity - milling spindle 13/9 kW feed 30 m/min rapid traverse 30 m/min no. of workpieces in the magazine 24 Stück tool taper SK 40 table surface area 800 x 500 mm table load 0,5 t Overall size 1,9 x 3,3 x 2,6 mm weight of the machine ca. 4500 kg Gedpfxoy I A Ums Anxoub Used vertical machining centre in good condition. - external eletronic hand wheel - coolant system - servo tool magazin