Used Italdibipack Es 5040 for sale (7,241)

Condition: new, maximum load weight: 39,070 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Partial list of features. Full equipment details available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also prepared for 3.5-inch) Underrun protection: * According to EC regulations, bolted design Side underrun protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function * Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery Brake system: * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120 * Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS * Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer) Mudguards: * According to EC regulations, PVC mudguards (half-shells) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into the outer frame (traction approx. 3 t) * 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t) Stake pockets/stakes: * 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Bolted front wall, approx. 1,200 mm high, metal plated Stake magazine: * Magazine for plug-in stakes inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: * According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross beam Equipment: * Warning sign according to ECE 70 * 2 LED work lights mounted on the lamp bracket (switched via reverse gear) * Bracket for rotating beacon at the rear (incl. beacon) * 1 foldable, extendable access ladder at the rear (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display Dedeyz E T Sopfx Abzjch * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the supports (switched via reverse ge

Condition: new, table length 4000 mm table width 2000 mm Djdpeibw Sxsfx Abzsch table height 200 mm weight of the machine ca. 2,5 t - high quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The basic equipment foot is available in various lengths. The load capacity of the foot is 2,000 kg.

Condition: excellent (used), Hydromotor for screw cylinder Injection unit size ES3550 Hägglunds Drives Type CA50 20 2 0 0 N 004 Dcjdpjfnqagsfx Abzoh

Year of construction: 2013, operating hours: 1,234 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: o, TECHNICAL DATA – MAGIC SKIN 5035 Power supply: 240 V – 1 Ph Djdpfexcv U Hox Abzsch Required power: 3.5 kW Overall machine dimensions (L x W x H): 1860 x 1000 x 1350 mm Working table height: 1020 mm Weight: 150 kg Maximum carton size: 495 x 345 mm Maximum product height: 100 mm Air consumption: – Performance: two cycles / min Notes: Technical modifications reserved. Performance depends on operator and type of packaging.

Condition: new, Year of construction: 2024, Shrink wrapping machines with simplified technology, advanced control logic and cycle management, designed to guarantee high application performances together with great user-friendliness and easy maintenance. Warranty: 12 months (single-shift operation), Technical specifications: Sealing area W x L: 420 x 550 mm Max. product height: 150 mm Dsdpehtuu Aefx Abzjch Mains voltage: 230 V - 1 Ph Power: 3 KW Dimension L x W: 1235 x 750 mm Height of work table with trolley: 920 mm

Condition: as good as new (ex-display), Year of construction: 2024, The Dibipack 3246 EV shrink wrapping machine opens the range of Dibipack Evolution “one-step®” systems, as easy to use as the standard Dibipack models. But thanks to the full electronics, great flexibility in use and high performance in controls and some innovative patented devices are offered. An ideal solution for small and medium-sized production volumes, as it is competitive and inexpensive. Dcjdpfxemt Dtvs Abzeh INFORMATION Working cycle electronically controlled by a microprocessor. It is possible to save 8 different work programs Automatic Sealing Time Adjustment: The machine will automatically adjust the sealing time according to the packaging speed. Ability to shrink when sealing is complete Retaining magnet included and adjustable: the hood remains closed until the end of shrinking. The hood can be opened after the fan has stopped to prevent hot air from escaping at the end of the cycle Reopening by gas pressure spring Begin control with proximity Energy Saving Function: The device enters standby mode when it is not working for a certain period of time Piece counter included Stand and scrap return on request The machine works with heat seal and shrink films such as PVC (BLUE FILM) or polyolefin films (GREEN FILM – GOLD FILM) Machine manufactured according to CE guidelines. TECHNICAL DATA – DIBIPACK 3246 EVX Power supply: 240V - 1ph Maximum power required: 2.1 KW Overall dimensions of the machine L x W: 1085 x 650 x 550 mm Worktop height (on stand): 920 mm Machine weight: 71 kg Sealing area W x L: 320 x 460 mm Maximum product height: 250 mm on request Impulse sealing system: bottom knife Maximum roll dimensions DIA x B: 250 x 470 mm Output: 4 - 6 pieces / min Programs: 8 Power consumption: KW / h 1.4

Condition: as good as new (ex-display), Year of construction: 2024, THE “GIANT” OF SHRINK PACKS Here is the Dibipack 85130 model, a new addition to the Italdibipack range of EXTRA-LARGE “One-step®” systems, theDibipack BIG, the largest models in the Dibipack range, conceived and designed to offer the best answer to the increasing demand for a large machine with large capacity and high performance. Ideal to pack large size and large surface products such as frames, pictures and panels TECHNICAL SPECIFICATIONS TECHNICAL DATA – DIBIPACK 85130 Voltage supply: 400 V - 3 Ph + N Maximum required power: 8 KW Overall dimensions of the machine L x W x H: 2700 x 1500 x 1400 (H) mm Dcsdpfxemv Enge Abzsh Worktop height (on stand): 900 mm Machine weight: 300 kg Sealing area W x L: 850 x 1300 mm Maximum product height: 250 mm on request Impulse sealing system: bottom knife Maximum roll dimensions DIA x B: 250 x 1200 mm Output: 4 - 6 pieces / min Notes: We reserve the right to make technical changes. The performance depends on the operator and the type of packaging. MORE INFORMATION An excellent result obtained by the Italdibipack Research and Development team, which gathered all the market needs and transformed them into a successful solution. With this new “giant”, the Dibipack 75125 and Dibipack 85150 models are “retired” thanks to the new dimensions of the sealing bars (850 x 1300 mm) that can accommodate a larger range of dimensions of the product. This new model has the same specifications as the shrink wrapping machines of the Dibipack line, but with some peculiarities: for example, two holding magnets that keep the hood closed during the work cycle and two fans that ensure better heat circulation. The machine works with heat seal and shrink films such as PVC (BLUE FILM) or polyolefin films (GREEN FILM – GOLD FILM). The machine is manufactured in accordance with CE regulations.

Year of construction: 2025, condition: as good as new (ex-display), Automatic skin pack packaging machines for better operability and larger production. Djdpfjim D Thsx Abzsch In concrete terms, skin pack means anchoring an object firmly with a plastic film on a cardboard base. This film is heated and "softened" by a radiant heating plate, adheres and sticks to the cardboard due to the vacuum effect, perfectly tracing the contours of the object Skin packaging machine in compact design with complete basic equipment as follows: Skin packaging machine in compact design with complete basic equipment as follows: - Mobile system, as it stands on lockable castors - with integrated high-performance vacuum pump - Loading table for skin carton - Removal table for separating the packs - Automated motion sequence - electronic control of the heating temperature - energy-saving heating - Stepless adjustment of the vacuum time - the plant is equipped with a resistant Plastic textured paint finish Warranty: 12 months (single-shift operation), excluding Wear and spare parts. From delivery date Technical specifications: Dimensions: max. carton 495 x 695 mm Product height: max. 150 mm Dimensions: L X W H 2450 x 1450 x 1700 mm Work surface: height with trolley 1050 mm Machine weight: 280 kg Compressed air: 6 bar dry Mains voltage: 400 V - 3 Power: 8 KW

Year of construction: 2022, condition: refurbished (used), functionality: fully functional, LEONARDO has all the properties of the small, yellow LEO stretch robot, such as the small working area of 750 mm around a pallet, compact design and motorized drive. In addition, it offers an electronically adjustable film brake, up to 100% motorized film stretching and the patented push mast, which allows it a winding height of 2,350 mm - with a total height of only 1,560 mm when not in use. • Compact design: only 75 cm space required • For pallets up to a maximum height of 2350 mm • Patented extension mast, from 1560 mm (at rest) to a maximum height of 2,350 mm • Electronically adjustable film brake, a motorized up to 100% • Electric maneuver (patent) that reduces the work area compared to other robots • 6 freely programmable programs (program memory) • Wide caliper strap • Electrically controlled steering • Maintenance-free battery (2 x 12 volts) • Charger: 220 volts integrated Pallet dimension: Length: min. 600 mm / max. without limit Width: min. 600 mm / max. without limit Height: min. 500mm / max. 2350mm Foil thickness of 8-30 my Pallet weight: min. 50 kg machine size: Height: 1,560 mm (resting state) Length: 1066mm Width: 738 mm Weight: 195 kg Battery for electric drive 24 V Dedeih Srispfx Abzjch Built-in quick battery charger 230 V Warranty: 12 months (single-shift operation),

Condition: new, Year of construction: 2025, Automatic skin pack packaging machines for better operability and greater production. In concrete terms, skin pack means anchoring an object firmly with a plastic film on a cardboard base. This film is heated and "softened" by a radiant heating plate, adheres to the cardboard due to the vacuum effect and sticks to it, the contours of the object being perfectly traced Skin packaging machine in compact design with complete basic equipment as follows: - with integrated high-performance vacuum pump - Loading table for skin cardboard - Removal table for separating the packs Dcjdpfx Ajhga Svjbzoh - automated motion sequence - electronic regulation of the heating temperature - energy-saving heating - stepless adjustment of the vacuum time Warranty: 12 months (single-shift operation), Technical specifications Skin cardboard: 345 x 495 mm Foil width: 390 mm max.good height: approx. ca.100 mm Heating capacity: 3.5 kW Footprint: L x W x H: 1650 x 1000 x 1400 mm Machine weight: approx. 110 kg Vacuum pump: 11 mc / h Power connection: 230 volts, 50 Hz

Condition: refurbished (used), Year of construction: 2020, Our mobile winder, is one of our demonstration machines, condition good, slight scratches on the housing and on the chassis, Warranty 12 months, completely checked and serviced. On request with optional accessories such as a wide feeler strap. Warranty: 12 months (single-shift operation), The advantages at a glance: - Working area of only 750 mm around the pallet - Extremely compact design - Patented steering system - Compared to its competitors, it takes up to 40% less space - Easiest handling - German support - Upgrades are also optionally available later The LEO only needs 75cm (about a shoulder width) around the pallet to be wrapped. WORKSPACE Pallet size: Height: min. 500 mm / max. 2,000 mm Length: min. 600 mm / without limit Width: min. 600 mm / without limit Machine dimension: Height: 1,950 mm Length: 980 mm Width: 700 mm Pallet weight: min. 50 kg (optionally also lower possible) FILM DATA Wrapping programs: - Foot and head wrapping - Cross and one-way winding - with stop for cover sheet support Film width max. 500 mm Core diameter max. 76 mm Outside diameter max. 220 mm MACHINE DATA Tension: - Battery: 2x 12 volts - Charger integrated 220 volts - Drive: 2x 24 volts - Foil slide: 1x 24 volts Foil carriage: - own parameters for up and down movement - Mechanical film brake - stepless adjustment Dcsdpfxewtt D Aj Abzeh Control: - Touch panel with digital display - Speed dial buttons - Drawbar with navigation buttons - Pallet detection via tactile belt - Emergency switch - 6 storable working modes - Double collision protection Mast: Stationary construction Weight: 195 kg CE marked machine the wrapping of black products or the use of black stretch film. and can be charged with any cable with a Euro mains plug at a 230V household socket. Such a charging cable is of course part of the scope of delivery.

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 Dodowx Dctjpfx Abzech * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high Dedpfx Ajw U H Sbjbzech * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: used, maximum load weight: 32,610 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 11/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete selection of vehicles with immediately and short-term available units on our website. Sample from the equipment list. Full equipment details available upon request. Chassis: * Welded construction made from high-quality steel profiles with through-profile cross members, designed for high point loads. Coupling Device: * 2-inch king pin Underrun Protection: * Bolted version, compliant with EC regulations Side Impact Protection: * EC compliant Dcjdowyhy Espfx Abzsh Landing Legs: * 2 x 12 t landing legs with compensating foot and one-sided operation on the right hand side (FR) Axles: * 3 x 9 t air suspension axle assemblies * Disc brakes * Brand: Gigant Brake System: * Dual-line compressed air brake system compliant with EC regulations, equipped with EBS and RSS, automatic load-dependent control * Spring brake cylinders as parking brake * Foolproof coupling heads permanently mounted on front crossmember, without connection line to tractor unit * Brand: Wabco Tyres: * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120 Mudguards: * EC compliant, PVC mudguards in front of and behind the axle assembly Spare Wheel Carrier: * 1 piece double basket with mounting hardware for one spare wheel with ET 120 Load Securing: * 9 pairs of foldable lashing rings, evenly distributed, tensile force approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tensile force approx. 2.5 t * Drill holes for tie-down straps approximately every 500 mm on the outer frame Front Wall: * Reinforced steel construction, fixed * Interior lined with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor set in outer frame Lighting System: * EC compliant, 24 Volt, with multi-chamber lamps * LED side marker lights * LED front position lights (white) * LED rear outline marker lights * Number plate lights * 1x 15-pin and 2x 7-pin plug connectors on front crossmember Paintwork: * Chassis and front wall sand-blasted, primed and painted in single color * Chassis: RAL 3002 carmine red * SSV: aluminium anodized * Underrun protection: white RAL 9010 * Attachments: galvanized/KTL black * Wheels: silver Including Special Accessories: * First axle liftable with fully automatic, load-dependent lift control * 10 pairs of stake pockets in outer frame, evenly distributed * 4 rows of stake pockets crosswise to loading area * 20 stakes made of galvanized pipe 80/50, total length approx. 1,000 mm * Storage magazine for 20 plug-in stakes on inner front wall * Twistlocks for 1 x 40’ and 2 x 20’ containers, flush-mounted at the rear * Twistlocks for 1 x 20’ container in middle position * Work light on lamp bracket (switched via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Condition: used, functionality: fully functional, Haldibipack Espert 5040 L-sealer Brand: Haldibipack Model: Espert ES 5040 2 N Required power: 220/380 Volt Machine weight: 270 kg Internal article number: 2025120106 Dcsdpfx Aox Ak Iuebzsh Collection address: Industriestraße 5 (47918 Tönisvorst) The machine was in operation until dismantling. Tailored solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic systems for loading and unloading your goods, as well as packaging machines, we are your competent partner! We are happy to prepare a customised offer or advise you on planning or installation-related questions. Simply let us know your requirements and site conditions. Benefit from our many years of experience and our excellent network of specialists. We have already successfully completed projects for companies from a wide range of industries, such as logistics, the pharmaceutical industry, skilled trades, or the electronics sector. Together, we will develop solutions to optimise your processes and material flow cost-effectively and sustainably. We can also offer you fully automated sorting systems or supplementary components such as order picking shelves or containers.

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine Dedpjukn S Hsfx Abzjch As shown in the pictures, its working condition is uncertain. Overall dimensions :3100 x 1950 x 2600 mm Weight: 5500 kg Manufacturer: Engel Type: ES 330/85 Year of manufacture: 1997 Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 74800 € 1413.72 € 40 to 2050 mm Y1 / Y2 / X und R Achse 200 mm 1700 mm 350 mm 440 mm servomotorischer Spindela 180 mm/s 10 mm/s 115 mm/s 650 mm 250 mm 1000 mm 7.2 kW 2600 mm 1450 mm 2650 mm 4400 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66S - 17 " Touchscreen - 3D imaging in simulation and production Dsdpfoynm A Hox Abzjch - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: - higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal -low energy consumption - compact motor-spindle unit with small amount of components -no hydraulic components optional equipment: Z1/Z2-axes CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: used, Milling spindle Manufacturer: HSD Type: ES 779L 4P 12.00 kW H1 HSD 12 kW milling spindle with tool changer and 6-position station for Kuka Quantec series Consisting of: 1 piece Water-cooled milling spindle with HSD ES779L 4P 12.00 kW H1 tool changer, liquid cooling Djdpfx Aewyay Dsbzech 1 piece Tool station for 6 tools (tool changer station) with Leonie measuring station for checking the tools 1 piece Kuka Tech cabinet with KEB frequency inverter, control technology, and water cooler, art. no. 00216249, serial no. 0395009, year of manufacture 2018 Weight 360 kg 1 piece Hose package and connection cable from the control cabinet to the HSD spindle. Originally intended for a Kuka robot from the Quantec series; all mounting brackets and connections are included. 3626ä

Condition: ready for operation (used), Indramat MAC 071A-0-ES-2-C / 095-A-0 permanent magnet three-phase servo motor, SN:35588 , professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos,The agreed sales discounts do not apply to this item. Price please ask separately! Dcedpfx Aei D Ig Ejbzoh

Condition: new, Year of construction: 2026, total length: 2,480 mm, Scissor platform Magni ES 1208AC+ Drive Electric Dcodpfx Abjza H R Iezsh Year built 2026 Work height (mm) 12,000

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 357 h, load capacity: 230 kg, lifting height: 7,800 mm, platform length: 1,870 mm, platform width: 800 mm, empty load weight: 1,485 kg, We are selling a scissor lift Jlg 1930 ES, Tested good batteries, one year old, Working height - 7.80 m Lifting capacity - 230 kg Dcodpfx Asvyqc Rsbzjh Weight 1485 kg Operates on batteries 220V charging Control from the platform The lift has been tested and serviced Netto price 3800 EUR

Condition: used, Year of construction: 1993, Technical details: mould plates - length / width: 500 x 400 mm Heating: Zweistufen Heizung 4,6 und 6,0 kW control: SPS voltage: 380 V (3x 20A) / 24 DC V work height adjustable: 870 - 970 mm total power requirement: 6 + 2,5 kW dimension machine xH: 2,8 x 1,1 x 1,3 m weight: 570 kg Compact angle welding machine with shrink tunnel Djdpeu Nu Hijfx Abzsch PACKAGING MACHINE WITH SHRINK TUNNEL AND COOLING STATION AND SPECIAL COOLING FAN movable/mobile Application areas/products: -div. brochures, plans or other made of paper/cardboard in DIN A 5 / DIN A 6 Applicable films: all half tube shrink films up to 0,060mm Welding system = impulse welding, with teflonized separation seam, adjustable automatic transport of goods into the shrink tunnel further details: -Tunnel passage width: 450mm -Tunnel passage height adjustable to 100, 200, 300 and 400mm -length of the heatable tunnel hood 900mm -Prod. output of the machine depends on product and film 5 to 20 cycles / minute (manufacturer's data) -max. film width (folded half tube) 550 / 550mm at 25 - 50 my -frame dimension 500 x 500 x 290 mm = max. Verpackungsmaß Heating: -two stage heating 4,6 and 6,0 kW -Fan infinitely variable Cooling station: -outlet 300mm -with blower Conveyor belt: -feed rate 2.5 - 12 m/min -steplessly adjustable i.d. *

Condition: used, Year of construction: 1992, Technical details: Dodpfxou Nzype Abzoch volume capacity: 1,95 m³/min feed pressure: 10 bar Number of working hours: 9166 h total power requirement: 15 kw weight of the machine approx.: 360 kg space requirements of the machine approx.: L:1,54xB:1,3xH:1,2 m compact construction with integrated filter techn. details - max. operational pressure of the tank 11,5bar - operation voltage 380V - filter make Balwin type BT 364 slightly damaged covering, besides that top used condition We don't sell spare parts nor have spare parts available! *

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Manufacturer: Kallfass GmbH Type: Compact Shrink Tunnel KC 5040/450 Universal Year of manufacture: 2011 Dcsdpfx Abezaclbjzeh Technical data: Sealing frame dimensions: 500 x 400 mm Film roll width: max. 550 mm Working height: 870 - 970 mm Power connection: 380 V three-phase Easy-to-operate corner sealing machine, combined with a shrink tunnel. Particularly robust design for industrial use. Sealing frame dimensions 500 x 400 mm. Proven impulse sealing technology with a Teflon-coated separating sealing wire for an absolutely odorless working process. Equipped with a closing mechanism as an automatic clamping system to ensure accurate adherence to the set sealing time and for trouble-free separating of even thick films. Inspection and demonstrations are possible by appointment in our premises. Functional guarantee, no warranty.

Year of construction: 1966, condition: used, machine/vehicle number: 12485, grinding diameter:350 mm grinding length:2500 mm centre height:180 mm Dsdpfx Abei E Ix Nszjch total power requirement:5,5 kW weight of the machine ca.:5,5 t