Used Macmon M100 for sale (211)

Year of construction: 2022, condition: excellent (used), functionality: fully functional, RATIONAL I COMBI PRO LM100BE-AXXX ELECTRIC OVEN WITH VENTLESS HOOD AND STAND Pjdpfx Apozv T Drshjgr This RATIONAL iCombi Pro is a second-hand unit in excellent condition, carefully maintained and fully operational.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: AA2/004582, functionality: fully functional, operating hours: 14,500 h, travel distance X-axis: 3,120 mm, travel distance Y-axis: 1,320 mm, number of axes: 5, TECHNICAL DETAILS Pjdjy Akr Ajpfx Aphegr X-axis travel: 3,120 mm Y-axis travel: 1,320 mm Number of axes: 5 MACHINE DETAILS Operating hours: approx. 14,500 h EQUIPMENT Suction pads Mounted air-blow nozzle Newly installed control unit Note: The machine has already been dismantled by the manufacturer.

Condition: excellent (used), Year of construction: 2023, operating hours: 4,050 h, functionality: fully functional, machine/vehicle number: AEFM6009, clamping force: 10,000 kN, screw diameter: 110 mm, clearance between the columns: 1,100 mm, column diameter: 180 mm, displacement volume: 4,941 cm³, injection pressure: 1,840 bar, injection weight: 4,546 g, mold height (min.): 450 mm, ejector force: 2,89,000 N, ejector stroke: 350 mm, opening stroke: 1,200 mm, plate length: 2,350 mm, plate width: 1,570 mm, plate height: 1,570 mm, total length: 11,300 mm, total width: 2,550 mm, total height: 3,400 mm, overall weight: 44,000 kg, heating capacity: 51 kW (69.34 HP), pressure: 178 bar, number of injections: 1, pump power: 1,36,000 W, power: 195 kW (265.13 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 371 A, Equipment: documentation/manual, The machine has relatively few operating hours and is in very good condition. It has been well-maintained. The machine processes only ABS, PP, and PS. It is controlled by a Beckhoff system. The machine is equipped with extensive additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 24 tool heating zones, a water manifold with 6 zones, a screw heater insulation, hydraulic screw rotation for die replacement, a die with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. In addition, water blocks are fitted to both the moving and stationary tables, each with 8 outlets. Furthermore, a number of spare parts are included with the machine, such as a complete die, a screw die, heaters, temperature sensors, and various seals for the hydraulics, as well as a self-filtration filter, a die wrench, and auxiliary ejector rods. The machine is being sold without the robot shown in the pictures. Pjdoznll Sspfx Aphegr

Condition: used, TECHNICAL DETAILS - Workpiece diameter : 0.5 - 40 [mm] - Max. plunge grinding length : 95 [mm] WORKING GRINDING WHEEL - Grinding wheel width : 100 [mm] - Peripheral speed : 35 [m/s] - Grinding wheel speed : 2228 [rpm] - Minimum wheel diameter : 260 [mm] - Maximum wheel diameter : 406 [mm] REGULATING WHEEL - Grinding wheel width : 100 [mm] - Wheel tilt : +/- 6 [°] - Min. diameter of drive wheel : 150 [mm] - Max. diameter of drive wheel : 205 [mm] SUPPLY - Installed power : 20 [kW] - Supply : 400V, 50 [Hz] DIMENSIONS - Floor dimensions : 4090 x 1640 [mm] - Machine height : 2.100 [mm] - Machine weight : 2.700 [kg] EQUIPMENT - CNC : SIEMENS SINUMERIK 840 D Psdpouhb Rcofx Aphegr

Condition: refurbished (used), For Sale: Refurbished EOS M100 – Ready to Use This fully inspected and refurbished EOS M100 is in excellent condition! This setup is ready to use and ideal for expanding or starting a DMLS production line. Specifications: • Technology: DMLS (Direct Metal Laser Sintering) • Material Type: Metal • Compatible Materials: On Request • Build Volume: 100 x 100 x 95 mm • Laser Type: Yb-fiber laser; 1 x 200 W Consumables Featured We offer plug-and-play materials, fully tested and optimized for use with EOS machines. Our exclusive Inframotion PA12 is designed to perform at or above OEM powder levels, while significantly reducing costs. By switching to our materials, you will reduce your production costs without compromising on quality. Included Services: • Transport & Installation: We ensure safe delivery in original EOS packaging and professional installation. • Warranty & Maintenance Plans: Flexible options to fit your needs, for long-term reliability and peace of mind. Psdpfswt Dhrex Aphogr About Inframotion 3D (IM3D) At Inframotion 3D B.V., we are the market leader in high-quality remanufactured EOS SLS and DMLS machines with comprehensive support services. We are the only provider to offer end-to-end solutions for used EOS equipment, with unmatched expertise and reliability. What we offer: • Expert maintenance: Installation, maintenance, repairs and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, specifically designed for EOS systems. • Unmatched support: From transportation to maintenance plans, we have it all covered. Trust IM3D for top performance, superior materials and the expertise to keep your SLS and DMLS production running smoothly. Please feel free to contact us for more information or questions!

Condition: used, Year of construction: 2018, CNC-CONTROLLED MACHINING CENTER AUTHOR M 200 AUTHOR M200 3710x1620 Z250 - CNC-controlled machining center 1 Technical data Work area I.M.S. I.U. Work area X-axis 3710 mm * 146" * Work area Y-axis 1620 mm * 63¾" * Workpiece passage Y 1900 mm 74¾" Workpiece passage Z 250 mm 9¾ Workpiece length for pendulum machining 1700 + 1700 mm 67" + 67" Travel speed of the X-Y axes PRO-SPACE 56 m/min 184 ft/min Travel speed of the X-Y axes PRO-SPEED 78 m/min 256 ft/min * Distance covered by all tools in the X and Y direction; see the corresponding layout for further details. With a 5-axis motor, the dimension in Y increases to 1680mm (66"), for motor JQX or 1720mm (67½") for motor KS/KT max. Width of the loadable plate for horizontal drilling, electric spindle only oriented vertically, no central reference stops Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Electrical standard specifications 400 Voltage 50 Hz 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h 2650 CFM Extraction air velocity 30 m/sec Extraction nozzle diameter 250 mm 9.8 Inches Noise level VSA * LAV * Drilling 72.2 74.6 Milling 74.3 80.7 Reference standard EN ISO 11202:1995* VSA = unloaded and without extraction * LAV = in operation with extraction Structure of the base body: The CNC machining center can be equipped flexibly with different milling units as well as multi-spindle drilling heads and many other units, up to dowel drilling units. In order to meet all requirements in the field of wood and plastic processing, as well as the demands of the users, each machine can be equipped with 3, 4 or 5 machining axes. The selection of drilling units extends to up to 34 drilling spindles with an integrated groove saw for the back panel groove or rabbet machining. The possibility of using this high-quality CNC machining center both as a cantilever table machine and with an aluminum grid table underscores the flexible range of applications and the performance of the M100 and M200 series. Powerful drilling heads, with individually selectable drilling spindles, max. RPM 8,000, and implemented in . technology, "the most robust drilling spindles on the market", with more than 1,000 maintenance-free application hours (lubrication interval of the drilling spindles). The possibility of being able to replace the drilling spindles within a very short time, "even without a technician", through the technology, without disassembling the drilling gear, sets a benchmark in the industry and is already standard on your machining center. Imagine your CNC machine performing hinge drilling in just one drilling operation (option), instead of the usual 3. An option that underscores our claim to offer you robust and high-performance units on our machines. Ideally and flexibly equipped for a wide variety of requirements. Whether manual or automatic, the FLEX cantilever work table allows vacuum cups and mechanical clamping elements, such as pneumatic clamps for window or curtain wall constructions (option), to be quickly, safely and cost-effectively adjusted to any material and clamping requirements, making your day-to-day work easier. Differently sized vacuum cups and clamping elements, which were developed in close cooperation with customers and users, are available as an option. Psdszvhkyopfx Aphsgr

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Automatic FROMM PM100002 Industrial Strapping Machine – Year 2022 – PET Strap – Automatic Wooden Slat Insertion System FROMM Packaging Automation industrial automatic strapping machine, model PM100002, manufactured in 2022 and designed for integration into an automated production and packaging line. The machine is particularly suitable for the automatic strapping of bundles, profiles, long products and industrial packages. Identification details Manufacturer: FROMM Packaging Automation S.r.l. Model: PM100002 Year of manufacture: 2022 Project number: 2110304 Serial number: 48.100002.057 Original delivery date: 19 September 2022 Machine configuration FROMM MH550 side-mounted strapping head KB4 strap dispenser Lower side magazine for wooden slats Automatic slat lifting system Automatic magazine movement Strapping arch Pneumatic system Electrical cabinet and control system Prepared for integration and communication with an automated production line Technical specifications Strap type: PET/plastic strap, 16 × 0.8 mm Strap feeding speed: 5.3 m/s Strap recovery speed: 5.3 m/s Adjustable tensioning force: 0.5–3.5 kN Final tensioning speed: 105 mm/s Power supply: 400 V – 50 Hz Maximum installed power: 3.8 kW Maximum current: 9.8 A Minimum compressed-air pressure: 6 bar Pgjdezq Df Nopfx Aphjr The FROMM MH550 is a heavy-duty industrial strapping head designed for demanding applications, with a maximum tensioning force of approximately 3,500 N and friction-weld strap sealing. Documentation included. Only 108.000 cycles The machine is supplied with extensive original FROMM documentation, including: Complete instruction manual Electrical diagrams Pneumatic diagrams Spare-parts lists MH550 strapping-head manual KB4 dispenser manual The equipment was originally supplied as partly completed machinery intended for integration into a complete production line. The relevant Declaration of Incorporation is available.

Condition: used, Year of construction: 2018, Overview  Pedpfxoykrdbj Aphegr This vacuum evaporator was manufactured in 2018 by Italian manufacturer REDA. The machine is designed for gentle concentration of musts, juices, and other liquid products at low temperatures to preserve aromas and product quality. It is almost new and offered for sale as it was intended for a project that did not proceed. The system features an automated, CIP‑ready design. Technical data  - Capacity: 100 L/h evaporation capacity at +22/+24 °C - Application: Concentration of musts, juices, and liquid products - Operating modes: Recirculation mode or direct concentration mode - Max. concentration: 55–70 °Brix - Daily output: 2,400 L evaporated / 24,000 L enriched to 10% - Utilities: - Electrical supply: 25 kW, 380 V / 3Ph / 50 Hz + PE - Water: +12/+18 °C (low consumption) - Compressed air: 6–8 bar - Connections: DN40 DIN, 50 mm hoses - Control system: PLC automation, IP65 control cabinet, digital temperature indicators Scope of Delivery  - Vacuum evaporator | REDA | CM100 | 2018 | Complete AISI stainless-steel construction - Evaporation chamber | Stainless steel, full inspection access - Heat exchanger | AISI 316L tubular exchanger - Vacuum pump | Liquid-ring system with cooling recirculation - Refrigeration group | Heating 75,000 kcal/h, cooling 60,000 frig/h, 2 × 12.5 HP Copeland compressors - Pumps | Stainless-steel centrifugal and mono volumetric discharge pump - Vapor condenser | Stainless-steel surface condenser - Instrumentation & tanks | Flowmeters, cold and hot water stainless-steel accumulation tanks

Condition: used, TECHNICAL DETAILS - Workpiece diameter : 0.5 - 40 [mm] - Max. plunge grinding length : 95 [mm] WORKING GRINDING WHEEL - Grinding wheel diameter : 350 [mm] - Grinding wheel width : 120 [mm] - Peripheral speed : 50 [m/s] - Grinding wheel speed : 2352 [rpm] - Minimum wheel diameter : 260 [mm] - Maximum wheel diameter : 406 [mm] REGULATING WHEEL - Grinding wheel width : 120 [mm] - Wheel tilt : +/- 6 [°] - Min. diameter of drive wheel : 150 [mm] - Maximum diameter of drive wheel : 205 [mm] SUPPLY - Installed power : 21 [kW] - Supply : 400V, 50 [Hz] DIMENSIONS - Floor dimensions : 3965 x 3103 [mm] - Machine height : 2.100 [mm] - Machine weight : 2.800 [kg] Pgodpsuhb Rpofx Aphsr EQUIPMENT - CNC : SIEMENS SINUMERIK 840 D

Year of construction: 2006, condition: ready for operation (used), Three automatic small parts storage systems (AKL) Siemens Dematic SR-M100 are available. Storage locations: 19450, payload: 2x50kg per compartment, max. loading unit dimensions X/Y/Z: 600mm/400mm/320mm, travel speed: 200m/min, lifting speed: 120m/min, retrieval speed: 100m/min. On-site inspection is possible. Available from approx. Q4 2024. Pgsdpjtvgqnofx Aphjr

Condition: used, functionality: fully functional, Year of construction: 2016, total length: 100 mm, total height: 100 mm, total width: 95 mm, overall weight: 570 kg, input voltage: 230 V, input current: 8 A, input frequency: 50 Hz, electrical fuse: 16 A, power: 1.7 kW (2.31 HP), We are offering this used EOS M 100 dental 3D printer, manufactured in 2016, for sale. Serial number: SI 2764 Wiring diagram number: 250000543 Pedpfx Apsy Szv Rshegr Year of manufacture: 2016 Voltage (1~/N/PE): 230 V Voltage (2~/PE): 200–240 V Current consumption (1~/N/PE): 8 A Current consumption (2~/PE): 8 A Mains fuse rating (1~/N/PE): 16 A Mains fuse rating (2~/PE): 15 A Frequency (1~/N/PE): 50 Hz Frequency (2~/PE): 60 Hz Rated power: 1.7 kW Rated short-circuit current: 5 kA Total weight: 570 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1993, functionality: fully functional, SEGATRICE usata SEMIAUTOMATICA, A DISCESA VERTICALE, TAGLIO A 60° DX-SX, da 1000x600,BIANCO BTM 100.60 dx- sx. TAGLIO A 60° DX-SX, da 1000x600, PREZZO MACCHINA VISTA E PIACIUTA,DA REVISIONARE. Pgodpfxozhunve Aphjr POSSIBILITA' DI REVISIONARLA A NUOVO

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 10 h, functionality: fully functional, turning diameter over cross slide: 610 mm, spindle bore: 130 mm, turning diameter: 1,000 mm, center height: 500 mm, turning length: 3,000 mm, quill diameter: 160 mm, quill travel distance: 300 mm, total length: 6,350 mm, total width: 2,190 mm, total height: 1,810 mm, spindle speed (max.): 315 rpm, spindle speed (min.): 3 rpm, swing diameter over cross slide: 610 mm, metric thread diameter (min.): 1 mm, metric thread diameter (max.): 120 mm, metric thread steps: 44, bed width: 755 mm, type of input current: three-phase, workpiece weight (max.): 6,000 kg, Maximum turning diameter: 500 mm Distance between centers: 3000 mm Bed width: 755 mm Diameter of swing over bed: 1000 mm Diameter of swing over carriage: 610 mm Spindle bore: 130 mm Spindle nose: D1-15/Short taper 15 Pgjdpfjy S Rqdox Aphsr Spindle speed range: 3.15 - 315 rpm (21 steps) Longitudinal feed range: 0.1 - 12 mm/rev, 57 steps Cross feed range: 0.05 - 6 mm/rev, 57 steps Rapid traverse rate longitudinal/cross: 3700/1850 mm/min Metric threads: 1 - 120 mm, 44 steps Inch threads: 3/8 - 28 TPI, 31 steps Module threads: 0.5 - 60 mm, 45 steps Diametral threads: 1 - 56 DP, 38 steps Tailstock quill diameter: 160 mm Quill mounting: MK 6 Quill travel: 300 mm Motor power: 22 kW Weight: 14,400.00 kg Dimensions: 6350 x 2190 x 1810 mm

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 161729, clamping force: 1,000 kN, screw diameter: 40 mm, injection weight: 158 g, ejector force: 40,000 N, total length: 4,225 mm, total width: 1,370 mm, total height: 1,200 mm, overall weight: 3,080 kg, heating capacity: 5.5 kW (7.48 HP), pump power: 18,500 W, power: 24.3 kW (33.04 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, input current: 96 A, Equipment: documentation/manual, We are offering this used Arburg 370M 1000-250 injection moulding machine, year of manufacture 1994. Serial number: 161729 Year: 1994 Operating voltage: 380 V 3~ 50 Hz Control voltage (230 V): 220 V ~ 50 Hz Control circuit voltage: 24 V = Total rated current: 96.00 A Total connected load: 55.0 kW Pedjyrczgopfx Aphegr Drive upgraded to xD card! If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: DN2380 1000KG, ABUS Lightweight Portal Crane / Gantry Crane Type: LPK Load capacity/Lifting capacity: 1000 kg Crane track/steel structure consisting of IPE200 beam / square tube 140x140, standing on 4 heavy-duty swivel castors (200 mm) with 1000 kg ABUS GM chain hoist with trolley drive Overall height approx. 4.72 m Width approx. 5 m Bottom edge of running rail approx. 4.52 cm Depth approx. 200 cm Hook height approx. 4 m Psdpfxjzvrhce Aphsgr Crane is dismantled and immediately available The location of the item is 75053 Gondelsheim Very good condition, almost new. See pictures. Shipping via freight forwarder or collection by appointment only.

Condition: excellent (used), Year of construction: 2009, Equipment: CE marking, Small mixing system for 3 gases with fluctuating withdrawal rates, mixture withdrawal possible from zero up to maximum capacity, independent of pressure fluctuations, rapid cycling withdrawal possible, lockable viewing panel for protection against accidental adjustment, splash-proof stainless steel housing. Technical data: Mixing range: Oxygen: (0-25% vol.) Podpfezrfmdex Aphegr Carbon dioxide: (0-10% vol.) Argon: (0-100% vol.) Inlet pressure bar: min 6 bar - max 20 bar dynamic Outlet pressure bar: 3 bar Measuring pressure: 6 bar Volume flow: 0 - 173 NI/min Scope of supply: without container

Year of construction: 2023, condition: used, functionality: fully functional, THM Recycling Solutions Granulation System Plastics Shredder, Granulation and Washing System comprising THM Recycling Solutions granulation unit with: THM FR300/235/215-25-7500 inlet belt conveyor (2024) Pgodpszhudwsfx Aphor THM ZM 1000 granulator (2023) THM FR300/235/215-25-7500 outlet belt conveyor (2024) HAG HA-SNP-P-20-14-0-7.5 hydraulic unit,12 bar Pierret guillotine cutting system with: Pierret G35RI guillotine cutting machine Pierret G28RI guillotine cutting machine 2x belt conveyors for infeed and outlet

Condition: used, functionality: fully functional, Year of construction: 1999, operating hours: 4,278 h, load capacity: 10,000 kg, lifting height: 5,400 mm, free lift: 1,710 mm, fuel type: diesel, mast type: triplex, construction height: 3,008 mm, fork length: 2,400 mm, drive type: Diesel, Diesel Forklift Mast Type: Triplex Transmission: Hydrostatic Condition: Ready for use and fully functional Technical Condition: Normal Front Tires Type: Solid Rubber Front Tires Condition: 60 - 80% Rear Tires Type: Super Elastic Rear Tires Condition: 60 - 80% Sideshift, Fork Positioner, Podpfx Apev R Nmcshjgr 3rd Valve, 4th Valve

Condition: used, Used Zeppelin / Henschel Model FM1000 stainless steel high intensity mixer. Approximate capacity: 1,000 litre (product dependent). Stainless steel mixing chamber rated atmospheric pressure at 200°C. External mild steel heating / cooling jacket rated 5 bar pressure at 95°C. Unit includes 3-tier mixing attachment bottom driven by 250 kW, 1490 rpm, 280/660 V, 50/60 Hz motor. Has a top-clamped lid. Includes pneumatically operated discharge valve. Pjdpszun Hfefx Aphegr

Year of construction: 2024, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: 86-731-85552647/18153792542, We are a company based in 9000 St. Gallen (Switzerland) and imported this planetary ball mill from China in 2024. The unit is brand new and unused. We have switched the machine on and let it run empty for a few minutes to verify its functionality. It comes with 4 x 25-liter nylon containers. Additionally, 120 kg of zirconium beads with a 1 mm diameter are available. ~ Manufacturer's Description: The YXQM series of planetary ball mills for mass production is a machine designed for production applications, built to handle medium-scale capacities to meet industrial requirements. It facilitates the smooth transition of materials from laboratory scale to full production, ensuring consistency and repeatability of processes and thus reliable material quality. The equipment is widely used across new energy, metallurgy, electronics, ceramics, geology, mining, construction materials, chemical industry, light industry, cosmetics, environmental protection, and other enterprise-level material production sectors. Psdpfx Apsyilnzehegr Extremely high centrifugal forces inherent to planetary ball mills generate intensive grinding energy, resulting in short milling times. These machines are ideal wherever the quality control process demands the highest standards of purity, speed, fineness, and reproducibility. This series can be equipped with vacuum jars, allowing samples to be ground under vacuum conditions. It is well suited for research tasks at scientific institutes, universities, and industrial R&D laboratories to verify the feasibility of scale-up to mass production, as well as for routine operations such as mixing and homogenizing soft, hard, brittle, or fibrous materials—from laboratory tests through to production. - Key Features: - High-performance, nanometer-scale grinding - Digital display, intuitive operation, precise parameter setting - Variable speeds from approx. 10 to 440/360 rpm, speed ratio 1:2 - Batch processing with up to 4×6/9 L samples, simultaneous processing of 4 materials - Electric lid opening and integrated crane for easy and convenient operation - Storage for 3 modes and 15 programs - Power failure protection with memory function and automatic restart - Suitable for dry, wet, vacuum, and protective atmosphere grinding - Machine stops upon lid opening; automatic interlock prevents accidental release - Equipped with rollers and swiveling feet for easy movement and stable operation Applications: Grinding, mixing, homogenizing, colloidal milling, mechanical alloying, mechanochemistry Fields of Application: New energies, geology/metallurgy, glass/ceramics, engineering/electronics, building materials, environment/recycling, agriculture, chemistry, medical, biology Feed material: Soft, hard, brittle, fibrous – dry or wet Size reduction principle: Impact, friction Feed size: < 5 mm soil, < 10 mm Final fineness: For colloidal milling, samples below 0.1 micron Number of grinding stations: 4 Grinding methods: Dry grinding, wet grinding, vacuum grinding, grinding under protective atmosphere

Condition: used, mileage: 500 km, power: 309 kW (420.12 HP), first registration: 08/2026, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), Manufacturer Scania Model G 420 B6x2?4NB Bucher FlexLine CM100 Year 2026 Condition Very good Serial Number YS2G6X20002209918 Ref. nr. 278178 Reg. date: 21-08-2026 Engine: DC13 176/420 hp Hk: 420 Km: 500 Gearbox: Opticruise G33CM1 Eurotype: 6 Diesel tank: 1 Tank liter: 265 L Rear view camera: ? Air conditioning: ? Cabin type: CG19N Radio: ? Refrigerator: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/65R22,5 - 315/80R22,5 - 385/65R22,5 Cover% left 100 % Pgjdpszv A Exjfx Aphsr Front suspension: Air Suspension rear: Air Wheelbase: 4350 mm. Toolbox: ? Total weight: 28000 Kg Manufacturer: Bucher FlexLine CM100 Tank capacity: 10000 L with Piston Tank pressure: 1.0 bar - PED High pressure pump: Uraca KD718 High pressure capacity: 333 l/min 170 bar Vacuum pump: CVS W 1600 - Variable hydraulics - Vacuum pump W1300 / W1600 Vacuum capacity: 26.666 l/min - 942 cfm Remote control: ? 12 features - Åkerströms Water heater: 9 kW oil boiler - circulation - two circuits Transport drum Rear on swing frame - 20+20+10 m 3" Spuleslangetromle: Hydraulic - 200 m 1" plastic hose reel Washing drum at bumper: 50 m 3/4 + 60 m 1/2 - plastic + plastic - Hose out/in on remote control

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: MY2001/012, Y2001/019, The compact FOBA M1000 laser workstation is designed for high-quality laser marking of small components, medium-sized workpieces, and small production runs. In addition to the automotive industry and the metal, tool, and mechanical engineering sectors, this small and mobile universal marking machine is particularly suitable for medical technology, plastics processing industries, and contract laser marking (e.g., promotional items). The M1000 enables both small metallic and plastic components and series to be marked efficiently and with high-quality results. Operating in laser class 1, the marking station features a programmable Z-axis, a small work table, and a smooth manual or optionally electrically operated lift door that provides access to the interior from three sides. To cover a wide range of applications, various fiber laser markers can be integrated. Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries, contract laser marking (e.g., promotional items). Pgedpeym N Nmsfx Aphsr The M-Series comprises advanced manual workstations for precise and economical laser marking of small to large and geometrically complex workpieces, as well as batches and small production runs. Two housing sizes (M2000 and M3000) and three models each (B: with work table; R: with rotary table; P: with X/Y/Z axis) are available. Modern fiber and UV lasers can be integrated, as well as camera systems for marking alignment, mark inspection, and code reading. The highly productive R models: motorized Z-axis, 2-station rotary table; ideal for marking a variety of serial parts (e.g., automotive interior components, metal parts, tools, medical products such as implants or instruments). Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries.

Condition: good (used), Year of construction: 2006, AKL, Dematic / Siemens, approx. 19,450 box storage locations, boxes approx. 600x 400m x 320mm - : Price ex location: 109.000.-€ (net), plus dismantling etc.! Manufacturer: Siemens AG, Logistics and Assembly Systems, Distribution and Industry, 58300 Wetter/Ruhr Type: AKL Year of manufacture: 2006 Podpfxjtw Diis Aphsgr Device type: Dematic SR-M100/1 Dimensions of the system: Length x width x height: 32,282 x 15,015 x 7,064 mm Storage locations: 19,450 units Number of appliances: 3 pieces Payload: 2x50 kg Loading units (max. dimensions): 600x400x320 mm Travel speed: 200 m/min Lifting speed: 120 m/min Extension speed: 100 m/min Condition: good Available: 4th quarter 2024 Location: 89584 Ehingen (Danube)

Condition: used, axle configuration: 2 axles, total width: 25,000 mm, total height: 40,000 mm, Year of construction: 2014, Equipment: ABS, For inquiries regarding the vehicle, Mr. Seidel will assist you (by telephone). MÜLLER MITTELTAL SF32BM/BT Concrete Mixer Semi-Trailer Superstructure: Liebherr HTM 1004 10m³, BPW axles, drum brakes, spring-loaded brakes, Wabco ABS, 1st axle liftable, air suspension, permissible total weight: 32,000 kg, unladen weight: 6,510 kg, payload: 25,490 kg, tire tread depth: 1st axle 14-15mm, 2nd axle 10mm Upon request, we can provide you with a leasing or financing offer. Mr. Seidel (tel.) is happy to assist you. Further information can be found on our homepage. Pjdpfx Apjyfu Sdjhjgr ... Subject to errors, changes, and prior sale!!! = Further Information = GVW: 32,000 kg Please contact Tobias Ebert for further information.

Condition: refurbished (used), Centerless grinding machine - centerless Ghiringhelli M100 CNC 1A 400x100mm wheel CN 1 axis plunge + through feed grinding The machine can be seen working in our warehouse in Gussago BS. Mimu(dot)com machine tools Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is given to them with the aid of a tool. The through-feed grinding or also through grinding and longitudinal grinding: pieces Pgedpfx Apjh D It Njhor to be worked proceed uninterruptedly with axial feed through the rectification gap. Wheel width: 100 Wheel diameter: 400