Used Marion Pre-Filter for sale (18,525)

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press Dedpfx Aozvz Tbsptswb - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Year of construction: 2026, condition: new, functionality: fully functional, New filter body Model: NYB‑30 Filter Area: 30 m² Cake Volume: ~600 L Capacity: 6–8 T/h (crude oil) Working Pressure: 0.1–0.4 MPa (max 0.5 MPa) Shell Temperature: ≤ 150 °C Machine Volume: ~2,300 L Weight: ~2,500 kg Shell Diameter: ~1,200 mm Plate Spacing: 70 mm Dedewwmziopfx Aptswb Inlet/Outlet: DN 50 inlet/outlet, DN 40 overflow, DN 500 discharge Total Height: ~3,150 mm Key Features: Hermetic sealed vertical structure – no leakage or odor High filtration precision – ideal for pre-degumming and post-bleaching crude oils Low maintenance – long service life of filter plates Simple cake discharge – hydraulic or manual vibration release Can be steam jacketed – optional heating for waxy oils Filter aid compatible – supports use of bleaching earth or diatomaceous earth Typical Applications Crude oil clarification after settling Bleaching earth filtration (after bleaching tank) Post-degumming or post-neutralization polish Winterization step before dewaxing Food, biodiesel, cosmetic-grade oil prefiltration Neuer Juneng NYB-30 vertikaler Druckblattfilter mit 30 m² Filterfläche. Angeboten wird nur der Filterkörper, ohne PLC-Automatisierung und ohne automatischen Ventilstand. Technische Daten: - Filterfläche: 30 m² - Filterkuchenvolumen: ca. 600 L - Kapazität: ca. 6–8 t/h für Rohöl / Pflanzenöl - Arbeitsdruck: 0,1–0,4 MPa, max. 0,5 MPa - Arbeitstemperatur: ≤150 °C - Behältervolumen: ca. 2.300 L - Gewicht: ca. 2.500 kg - Standardausführung in Kohlenstoffstahl - Edelstahl-Ausführung gegen Aufpreis auf Anfrage erhältlich Geeignet für Pflanzenöl, Rapsöl, Sonnenblumenöl, Sojaöl, technische Öle, Biodiesel und oleochemische Anwendungen.

Condition: refurbished (used), Chamber filter press 1200x1200 Application: gravel works / tunnel construction Number of filter plates: available in different designs and number of plates Filter pressure: 15 bar Filter cloths: optional in coordination with the medium Dwedpfxjrq I Iwo Aptsb Piston diaphragm pump: optional Available: pre-configured from stock or according to customer requirements Condition: refurbished - rebuilt also according to customer requirements

Condition: good (used), Plant: Chamber filter press Type: Chamber filter press 470/36 Djdsqa D A Depfx Aptewb Design: side rail guided Machine no.: 2770 Filter plate format: 470x470 mm Number of plates: 36 Filter plates: PP Cake thickness: 30 mm Drain: open Filter cloths: optionally available to suit the medium Press capacity: approx. 150 dm3 Plate pack length: approx. 1730 mm Filter pressure: approx. 15 bar Closing pressure: approx. 380-410 bar Plate transport: manual Pump technology: optional Dimensions L 3500 x W 1000 mm Accessories: Optional - drip plates, ram extension and plate package can be extended Hydraulic unit: AC motors 1.1 KW Purchase or hire: Viewings of the systems by arrangement at our factory

Condition: used, Original Knecht filter (air filter), pre-filter, pre-cleaner, air filter -Turbo pre-cleaner -Filter with: 76 mm inlet Dodpfxod Sxg Ne Aptswb -Dimension: Ø 193/270 mm -Weight: 2.1 kg

Condition: ready for operation (used), functionality: fully functional, power: 22 kW (29.91 HP), Steam boiler LOOS DF 600kg/h renovation! EPS EXPANDER continuous operation 600kg/h 15g/liter electric power 22KW EPS bead storage 300 m3 Dedpfeu U Ad Rox Aptswb

Condition: good (used), Year of construction: 1994, functionality: fully functional, space requirement height: 2,440 mm, overall weight: 1,480 kg, pressure: 2 bar, total width: 1,300 mm, total length: 1,850 mm, total height: 1,650 mm, filter area: 0.75 m², operating temperature: 200 °C, ESTRELLA DN 1000 GLASS-LINED PRESSURE NUTSCHE FILTER High-quality pharmaceutical/chemical pressure nutsche filter manufactured by Estrella AG, Switzerland. Manufacturer: Estrella AG, Ettingen, Switzerland Year: 1994 Type: Pressure Nutsche Filter / Pressure Filter Diameter: DN 1000 Filter area: approx. 0.75 m² Material: Steel, highly acid-resistant, glass-lined Glass lining quality: ESTRELLA 2000 The unit is equipped with a heavy-duty hydraulic lifting and tilting system for opening the vessel. The hydraulic system is manually operated and integrated into the robust steel frame. Main equipment: - DN 1000 pressure nutsche filter - Approx. 0.75 m² filtration area - Acid-resistant, glass-lined steel construction - ESTRELLA 2000 glass lining - Large, hydraulically lifted and tiltable top cover - Manual hydraulic pump - DN 1000 x 370 top cover - DN 1000 x 550 center section - DN 1000 x 370 bottom section - Filter / perforated plate - 2 x DN 100 connections with sight-glass fittings - 3 x DN 50 connections on top cover - DN 50 bottom connection - Additional fittings and pressure gauge - Heavy-duty steel support frame Dsdpfx Apsu U Afuotswb According to the original manufacturer documentation, the ESTRELLA 2000 glass lining was high-voltage tested for porosity in accordance with DIN ISO 2746. The glass-lined surfaces are visually in very good condition. The blue enamel lining shows a clean and well-preserved appearance. The machine originates from pharmaceutical production. Original Estrella documentation, drawings, and historical manufacturing documents are partially available. Further technical documentation is currently being located and will be supplied if available. The original purchase price in 1994 was CHF 59,218 net, excluding transport and taxes. Inspection of the unit is possible at our warehouse in Switzerland by appointment. CYCRON GmbH Switzerland

Condition: reconditioned (used), machine/vehicle number: 1246, • Condition: Requires refurbishment / For overhaul Description: Dedpfozr H Ddox Aptewb The machine is designed for dewatering and treating sewage sludge. • Price: €23,200 Note: The mechanical parts have been refurbished, including a new rubber-coated roller. The entire structure is galvanized.

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. 7.5 KW 8 Bar 1000 lts/min Very low running hours - 1351 run hours Complete with three filter set Dedpexaxr Nefx Aptswb

Condition: used, functionality: limited functionality, filter pressure: 8 bar, total width: 1,000 mm, total length: 4,000 mm, total height: 1,400 mm, year of last overhaul: 2026, empty load weight: 800 kg, overall weight: 900 kg, operating pressure: 6 bar, Chamber filter press with 46 filter plates, 50x50cm, without pump. Dedpfx Apszlrlmjtewb Filter cloths are in good condition with little wear; the filtered product was vegetable oil.

Condition: used, Year of construction: 1994, Filter area: approx. 8m², number of filter leaves: 9, vessel capacity: 720l, allowable operating overpressure: 6bar, allowable operating temperature: 80°C, vessel diameter: approx. 760mm, inlet: DN50, outlet: DN50, vent: DN25, solids discharge: DN350. Pumps and piping are available. Filter empty weight: approx. 750kg, space requirement X/Y/Z: approx. 2000mm/1790mm/2800mm. Inspection possible by arrangement. Djdjzu S Adspfx Aptewb

Condition: ready for operation (used), Year of construction: 1993, A candle filter system Faudi with precoating principle for the treatment and purification of grinding oil is available. Operating fluid: grinding oil, flow rate: 360m³/h, tank capacity: 180m³, control: Siemens. Documentation available. An on-site inspection is possible. Dodpfx Ajxnbr Isptjwb

Condition: refurbished (used), Year of construction: 1986, Chamber filter press, completely overhauled, with stainless steel lining, 82 PP (food-grade) filter plates, 30 mm cake thickness, press capacity approx. 1100 liters, filter area 96 m², new filter cloths fitted, max. 15 bar feed pressure possible, closed discharge via 2 diagonal corner holes, automatic plate transport and optional stainless steel filter cloth washing system with 100 bar high-pressure pump, with stainless steel base frame for height adjustment, control cabinet Dodpfon Dw Nkjx Aptewb

Condition: ready for operation (used), A Schenk Orion filter press with a deflection chamber is available. Number of plates: 85, frame: 100, plate dimensions X/Y: 600mm/600mm, max. filter area with 80 plates: approx. 22m², pipe connection diameter: 50mm, throughput capacity: approx. 30hl-45hl/h, max. throughput capacity: approx. 75hl/h. An on site inspection is possible. Djdsx Sywtspfx Aptowb

Condition: used, Year of construction: 2017, Name: Used chamber filter press Manufacturer: JKF Kübler Type: KFP 800-40-25K-OA-AU/LG-2 Year built: 2017 Construction form: Side beam press Press content: 470 Liters Cycle: Open Filter area: 41,7 m2 Plate size: 800 x 800 mm Number plates: 41 Plate material: Polypropylene Plate transport: Automatically Cake thickness: 25 mm Closing pressure: 360 bar Dimensions: L 4303 x W 1700 x H 2110 mm Empty weight: 4830 kg Technical doc.: Yes Message: It was used in electroplating. Accessories: A switch cabinet, a control cabinet, a hydraulic system, piston pump, a drip tray. Condition: Second hand Price: By request Djdpfex Swp Hox Aptowb

Condition: good (used), Used stainless steel reactor with double jacket Item number: 10271 Last application: Chemical industry Volume: approx. 515 L Operating pressure: +3 bar Operating pressure, double jacket: +6 bar Type: Floor-standing Material (in contact with media): 1.4301 / AISI304 Design: Double jacket Bottom: Klöpper bottom Top: Klöpper bottom Tank dimensions: Tank inner diameter: 900 mm Cylindrical height: 420 mm Overall height: 1660 mm Height of legs: 490 mm Outer diameter: 920 mm Distance from outlet to bottom: 340 mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 / Painted steel Equipment: Double jacket Various connections on the top Dome cover on the top Filter plate in the tank Dwsdpfx Apsd Eagpotob

Condition: like new (used), Max. 16 bar / Outlet pressure 0.5–10 bar Dwjdpfx Aozdc H Hsptsb Max. particle size: 25 µm Application: Compressed air systems Width: 45 mm Height: 190 mm Depth: 45 mm Weight: 341 g Condition: Like new

Condition: used, System: Chamber filter press mobile, used Type: Netzsch Dwedpfowqydkjx Aptjb Application area: sludge dewatering Machine No.: 89040419 Year of construction: 1994 Filter plate size: 1200x1200 Number of plates: approx. 100 Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 250 m2 Press volume: approx. 3540 dm3 Filter pressure: approx. 15 bar Washing system: No Conveyor technology: Conveyor belt underneath Discharge: Telescopic conveyor belt Kastner Polymer system: Alltech 3-chamber Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental: Rental or purchase. Inspection of the systems by arrangement at our works.

Condition: used, Name: Filter press used Manufacturer: Netzsch Type: 800/80 Dsdpfozy Hyuox Aptjwb Year built: 1998 Plate size: 800 x 800 mm Number plates: 81 Press content: Approx. 1.200 liters Filter area: Approx. 88 m2 Filter pressure: 15 bar Cake thickness: 30 mm Cycle: Closed Plate transport: Manually Plate material: Polypropylene Construction form: Side beam press Filter cloth washer: Yes Filter cloths: No Empty weight: Approx. 7.000 kg Technical doc.: Yes Accessories: A control cabinet, a hydraulic system, a light curtain, a filter cloth washing system, a high-pressure pump Condition: Second hand Price: By request

Condition: used, Name: Used chamber filter press Manufacturer: Diefenbach Type: FP DE800-90 Year built: 1997 Plate size: 800 x 800 mm Number plates: 90 Press content: approximately 1350 liters Filter area: Approx. 99 m2 Filter pressure: 15 bar Cake thickness: 30 mm Dwjdezy H Dgjpfx Aptjb Cycle: Closed Plate transport: Automatically Plate material: Polypropylene Construction form: Bridge beam press Filter cloth washer: No Filter cloths: No Dimensions: L 8500 x W 1300 x H 2100 mm Empty weight: approx. 8000 kg Technical doc.: Yes Accessories: A control cabinet, a hydraulic system, a light barrier Condition: Second hand Price: By request

Year of construction: 2008, condition: ready for operation (used), Offered for sale is a Kern Kraft chamber filter press. Max. filtration capacity: 2000l/24h, number of filter plates: 10 standard, expandable to 20, filter area range: 3.9m²-8m², chamber volume: approx. 40l. Equipped with plates and cloths, pressure switch, stainless steel filter cake tray and stainless steel piping, expansion tank, check valve and automatic shutdown, pump and candle filter housing with filter cartridge and control cabinet. Dimensions X/Y/Z: 2500mm/1000mm/1800mm, weight: approx. 630kg. An on-site inspection is possible. Dwedpfjztzqnox Aptjb

Condition: used, Used Envites model K800/55-50/30 chamber type filter press. Filtration surface: 49,5 sqm Dwsdozun Dwspfx Aptsb Chambers & Plates: 50 chambers, thickness 30 mm, (49) polypropylene 800x800 mm recessed plates and (2) end plates Cake volume: approx. 673,5 litre Others: max. filtration pressure 16 bar, closed delivery, (5) eyes per plate, double acting hydraulic ram with hydraulic agregate, plate shifter, CE Marked, ES Declaration of Conformity, Comprehensive technical documentation included. Specifications: Material: Carbon steel/polypropylene Plate Size: 800 x 800 # of Plates: 49 Delivery: closed Eyes: 5 Cake Capacity: 670 Plate Type: recessed Plate Thickness: 60 Surface Area: 49,5 Closure: hydraulic Operating Pressure: 16 Weight: 5500

Condition: good (used), Year of construction: 1988, Reaction vessel, batch system, solids separator, washing trough, painter's wash station, water treatment, tool and water cleaning, filter press, chamber filter press -Manufacturer: Poligrat, chamber filter press type 470-20/2 -Model: 11 plates Dodpfxjhvfzne Aptewb -Hydraulic cylinder: Stroke: 115 mm -Dimensions: 1315/920/H1720 mm -Weight: 580 kg

Condition: ready for operation (used), System: Netzsch 800 /80 sidebar Size of plate: 800 x 800 mm Chambers: 80 Filterplates: Polypropylene Filter cloths: as an option Outlet: open Filter surface: approx. 88,48 m² Volume of filtercake: approx. 1272 dm³ Working length: approx. 4656 mm Filter pressure: 15 bar Closing pressure: Min. 380 bar, max. 410 bar Plate closure: electro hydraulic Plate transport: manual Dimensions: LxBxH approx. 5300 x0900 x 1040 mm Weight filterpress: approx. 4 t Underframe: available from stock as optional accessories Dimensions: LxBxH 8000 x 1050 x 2020 mm Dsdpfx Aed E Dgkjptswb Weight: approx. 5 t Control cabinet: yes Pumps: as an option Accessories: mixing tank optionally available as a special accessory 3.00x1.50x2.20 m Special services: Refurbished service to customer optional. The system goes through a pre-delivery service check or a complete overhaul. Rent or Buy: Machine can be inspected at our factory We can offer Spare Parts, Accessories and Service for your Chamber Filter Press - Rittershaus & Blecher, Netzsch and more Filter Press Brands.

Condition: used, Used SCHENK stainless steel filter press with polypropylene plates. Dedpfx Ajzun D Rsptjwb Manufacturer: SCHENK, Germany Filtration surface: 4,3 sqmt Plates: (29) polypropylene plates and (2) endplates Closed delivery and hand closure