Used Mbo K76 - 4 P Kz for sale (80,628)

Year of construction: 1993, condition: used, machine/vehicle number: 101793 , Palletfeeder PD 78-T 4 Buckles (manual) 3 Folding Knives Up to 32 pages folding Rsdpfx Afek Izq Eohscd Horizontal Stack Delivery SBP46

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis, bent * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, well-dimensioned outer frame * 4-axle arrangement. Wheel protection above the axles with spray mist suppression * All steel parts sandblasted * Lateral impact protection made of anodized aluminum mounted * Increased point load of approx. 30,000 kg over approx. 4,000 mm * Special design in the bent area for maximum low-bed length in combination with AluLeg outrigger supports instead of telescopic outrigger winches, max. rear swivel radius of the tractor unit approx. 2,100 mm Special superstructure with rear beam extension * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding tarpaulin with plastic flaps * Rear beams extendable to approx. 4,200 mm * Three sliding beams per side with rubber cord relief * Additional center beam locking in the roof beam and parking position, by means of a pull cable and spring latch * Lifting roof mechanically adjustable, lifting height approx. 400 mm, can be operated on both sides or on one side, without opening the opposite side and the doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with height adjustment in the beams * Front overhang on the front wall for operation under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, bottom 450 mm pockets, above 4 rows of single pockets * Only 3 rows of insert slats in the upper bed. Spacing between slats evenly distributed Redpfx Aolthgujfhjcd Floor * Approx. 27 mm special water-resistant glued beech plywood, rough surface * Steel sheet in the wheel arch area * Forklift truck accessible according to DIN standard * Outer frame flush with the surface Brakes * WABCO compressed air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and aggregate load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low-loader design * Air suspension with lifting and lowering device, total stroke approx. 230 mm * Third and fourth axles as friction-jointed trailing axles with electric and mechanical lock Twin tires * 235/75 R 17.5, -16-ply, incl. E-wheel holder. without E-wheel Paint finish * Chassis in RAL 3002 red, solid color * Center beams, axles coated with KTL black * Corner beams in hot-dip galvanized design * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Superstructure in RAL color, solid color Special equipment incl. * Air suspension in ECAS design, operated on the semi-trailer * Overwidth signs front and rear in zinc-plated, steplessly telescopic design with attached warning lights including socket for rotating beacons (small panels) * Sliding tarpaulin cover locking additionally from the outside * 4 beam adapters for special outer frame profile, to lock the center beams as desired * PVC sliding tarpaulin, color similar: RAL 9006 silver * Roof tarpaulin translucent, in overwidth and overheight design, flat hooks, tarpaulin folds, closures with pawl lock /OCS * Telescopic socket for rotating beacon including beacon on the rear left * Outer frame for machine transport with app

Condition: used, Year of construction: 2005, Folding machine MBO K 800.2/4 SKTL MWK Year: 2005 Description: - 16 page folder - MBO Navigator Feeder - Pallet feeder - Excluding pump Folding unit MBO K 800.2/4 SKTL MWK - Parallel fold unit with 4 buckle plates - Perforating shaft - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left - Second cross fold to the left and right Rjdotczixepfx Afhocd - Noise hood over the entire folding section - Excluding delivery

Condition: good (used), Folding machine MBO T49/4, machine number 83067246, 4 pockets + delivery, flat pile feeder, counter, in good condition, immediately available. If you are interested, we will also be happy to provide you with information about other machines in our inventory. You are welcome to inspect the machine at our facility after prior arrangement. Rjdpohb Ep Iofx Afhocd

Condition: good (used), machine/vehicle number: X02/22, Folding machine MBO T530-1-53/4 F, 4 folding pockets, counter, compressor, second folding unit with 4 pockets, 1 knife, machine number X02/22, in good condition, immediately available. WITHOUT DELIVERY. If interested, we will gladly provide information on additional machines in our inventory. You are welcome to inspect the machine at our premises by prior appointment. Rcedpfxsxdhv Ej Afhod

Condition: used, Year of construction: 2014, Folding machine MBO T700/4 Year: 2014 Description: - 4 page folder - MBO Navigator Feeder Rsdsyzdt Djpfx Afhjcd - Round pile feeder: R 700 - Pump Buckle folding unit: 1 MBO FP 10 - Automatic buckle plate adjustment - First buckle folding section with 4 buckle plates - Slitter shaft cassette - Perforating shaft - Anti noise hood(s) - Excluding delivery Max. mechanical speed: 30 - 230 m/min Maximum size range: 68 x 120 cm Minimum size range: 15 x 20 cm

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Offer without obligation 1) Combi folding machine Make: MBO Type: K 800.2 S-KTL-Aut. Size: 78 x 120 cm Year: 2009 Equipment: Rjdpfx Ajy I Txvsfhjcd - Automatic combi folding machine MBO K 800.2 -.S -KTL. - pallet feeder K8 - FP120 - VACULIFT separation head - loading of feeder from 2 sides possible - feeder pile-height 120 cm - VIVAS special sheet infeed- and alignment system - 1. fold-unit = 4 combiplates (stainless steel) - rear located knife shafts- - KTL- crossfold unit with 2 pneumatic driven high-speed fold-knifes - 1 laying buckle after 1. knife - rear located knife shafts after laying buckle - automatic pocket- and switch blade adjustment - NAVIGATOR -Control with Touchscreen for all functions, settings and presetting-functions - RAPIDSET-basecontrol incl. motorizing of all combi fold pockets - noise hoods and guards on parallel- and cross-fold. - approved and maintenance free, economical and silent belt drive - Palamides Alpa 500 delivery. - special compressor ! - accessories, techn. documentation - machine in excellent condition ! Price under request more pictures and video are available,

Condition: used, functionality: fully functional, infeed width: 740 mm, Folding machine MBO K 74/4 KL with flat pile feeder. Paper size: min15x25cm to max. 74x112cm speed: 30-150 m/min with belt delivery and compressor. In function, can be tested. Folding rollers renewed in 2017. Rjdetvfqwopfx Afhjcd

Condition: not inspected (used), functionality: unexamined, Folding machine T500/4 without second folding unit, without delivery unit Rsdpferqf Sxjx Afhjcd

Condition: used, Year of construction: 2008, Folding machine MBO K 800.2/4 S KTZ Year: 2008 Description: - 16 page folder - MBO Navigator Rodjychztepfx Afhscd Feeder - Round pile feeder: R 800 Folding unit MBO K 800.2/4 S KTZ - Parallel fold unit with 4 buckle plates - Second cross fold to the left / right - Noise hood over the entire folding section Excluding delivery

Year of construction: 1991, condition: excellent (used), machine/vehicle number: 61861201, Flatpile, Vaculift, Vacubelt, DV Pump, Shingle belt delivery, MCC1 counter Machine nr: 61861201 Redehqhg Aepfx Afhscd

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, infeed width: 720 mm, Placing a bid obligates the buyer to collect the equipment on time, no later than 31/12/2025! The offer includes: - MBO R 700 Feeder (Serial no.: 0722420, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1543, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1544, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1545, Year: 2002) - MBO SBAP-46-ME Vertical Delivery (Serial no.: 90020602, Year: 2002) - H+H 148/2 Transfer Unit (Serial no.: 820-411, Year: 2002) - Bickel SGU Die Cutter (Serial no.: 033, Year: 1997) - MBO 3-Up Delivery for SAP 66-ME (Serial no.: 910913362) - Polar L-1000-W-3 Pallet Lift Table (Serial no.: 6072421) TECHNICAL DETAILS Fold Plates Fold plates 1st folding unit: 6 (individually driven, removable sheet transfer) Fold plates 2nd folding unit: 6 Fold plates 3rd folding unit: 2 Infeed Width Infeed width 1st folding unit: 720 mm Infeed width 2nd folding unit: 720 mm Infeed width 3rd folding unit: 520 mm This machine comes with a gate fold plate (usable in units 1 and 2), as well as 2 separate sheet diverters and 1 auxiliary frame for setup. Units 2 and 3 are electrically height adjustable! Rcodpfx Aexyhnyefhsd Note: The MBO delivery unit is defective.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: VVE/17636, Z07/78, MBO T530-1-53/4 F folding machine – flat pile feeder, pump and accessories – 4 fold pockets Rsdpfjxwpqdox Afhocd

Condition: ready for operation (used), Size max 560 x 920 mm min 150 x 180 mm Speed max 180 m/min Equipment feeder: • continuous feeder • MS control Rjdpfx Afsd A Hcvshjcd • counter 1st folding unit: • 4 buckle plates • noise prevention delivery: • belt delivery

Condition: good (used), Year of construction: 2008, Format: max 820 x 1,750 mm Format (pallet feeder): max 820 x 1,200 mm; min 150 x 270 mm Format (round pile feeder): max 820 x 1,750 mm; min 150 x 150 mm Folding capacity: max 205 m/min Length with pallet feeder: 5,180 mm Length with round pile feeder: 7,680 mm Width: 3,210 mm Cross-fold: max 16 pages Rcsdpfx Afjrbzv Ijhed Features Feeder: Control: - Vacutable - Vacubelt - Counting device 1st folding unit: - Upstream slitter shaft - 4 buckle plates - Motorized buckle plate adjustment - Spiral rollers - Slitter shaft cassette MWK - Noise protection device 1st cross fold: - Cross fold folding knife - Pocket after the cross break on the right - Slitter shaft after the cross break - Spiral rollers 2nd cross break: - Cross break Folding knife left - Spiral rollers

Condition: ready for operation (used), Year of construction: 2003, MBO folding machine K76/6 KTL, built in 2003 Round pile feeder 1st station with 6 folding pockets + a folding roller upstream preparation for glue Downstream knife shaft K-part Rcedpfx Asvyaqqsfhsd 2 folding blades lying pocket Horizontal delivery FA 66/ME Pump

Condition: ready for operation (used), Year of construction: 2007, Technical specifications: 4 pocket folds. Rjdelfgcwjpfx Afhjcd

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Full specifications available upon request. Chassis, stepped: * Special steel frame made from high-strength fine-grained steels, electrically welded at connection points * Generously dimensioned outer frame. 4-axle configuration * Wheel covers over the axles with spray suppression * All steel parts sandblasted Rsdpfxswx Dbio Afhjcd * Side underrun protection made of anodized aluminum mounted * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special construction in the stepped area for the longest possible low-bed length in combination with AluLeg drop supports instead of telescopic support legs, maximum rear swing clearance of the tractor unit approx. 2,100 mm Special body with rear stake extension: * DINKEL – special body * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes extendable for loading/unloading up to approx. 4,200 mm * Three sliding stakes per side with elastic relief * Additional intermediate stake lockings in roof beam and parked position, via pull cable and spring bolt * DINKEL – mechanical lift roof, height-adjustable * Lift roof height approx. 400 mm, operable from both sides or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments by adjusting the stakes * Front cover at bulkhead for driving operation under the tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, 450 pockets below, four rows of single pockets above. Only three rows of slats in the raised platform, spacings evenly distributed Floor: * Approx. 27 mm special waterproof bonded beech phenolic plywood, rough surface * Steel sheet in the wheel well area. Suitable for forklift traffic as per DIN standard * Outer frame flush with deck surface Brakes: * WABCO air brake system with EBS according to EC Directive 71/320, including PREV (Parking-Release Safety Valve) * Spring-loaded brake cylinders as parking brake * WABCO Smart Board with mileage counter and axle load display * Including WABCO tire pressure monitoring system Axles: * 4 x 10,000 kg SAF with drum brakes in low-loader design * Air suspension with lift and lower device, total lift approx. 230 mm * Third and fourth axles as friction-steered trailing axles with electric and mechanical lock Twin tires: * 235/75 R 17.5, 16-ply. Make of our choice, including spare wheel holder * Without spare wheel Lighting: * According to EU regulations, including LED side marker lights * Position lamps in LED design * 2 additional reversing lights * 2 work lights on the inside front wall, upper section Paintwork: * Chassis and body in one color, RAL 3002 carmine red * Intermediate stakes, axles KTL-coated black * Corner stakes hot-dip galvanized * Plastic parts black * Galvanized parts unpainted * Rims in factory silver Special equipment included: * 15-pin electrical supply cable * Air suspension in ECAS design, operated on the trailer * Oversize signage front and rear in galvanized, infinitely telescopic design with installed marker lights, including sockets for rotating beacons (small signs) * Additional external release for sliding roof frame lock * 4 stake adapters for special outer frame profile, to lock intermediate stakes as needed * PVC sliding tarpaulin, color similar to RAL 9

Condition: ready for operation (used), MBO Folding Machines MBO ET46 bump turn -1983 Rcjdpfx Aeir A Imsfhod

Condition: used, offer consists of: Rjdpfszpwhhex Afhjcd MBO folder T520-2-52/4 numbers of buckles / knifes: 4 buckles 2 knife All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Round Pile Folding Machine Stahl KC 78/4-KZ for 16 pages Cross Fold Falzmaschine / Folding Machine Stahl KC 78/4-KZ 16 Seiten Falzmaschine / 16 pages Cross Fold Year 1988 - Serial-No. 36526/88-148099 Arbeitsbreite max. 780mm / Working width max. 780mm Rundstapelanleger / Round Pile Feeder 1. Station 4 Taschen / 1. Folding Unit 4 Buckles 2. Station 3 Schwerter (links oder rechts Auslage) / 2. Folding Unit 3 knives (left or Right delivery) Schuppenauslage / Stream delivery Stahl SAK Inklusive Kompressor und Handbücher / Included Compressor and Manuals Vorgelagerte und nachgelagerte Messerwellen / Front mounted and rear mounted slitter shafts Rcsdpfoxlr Afjx Afhod Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1999, machine/vehicle number: 103638, Falzmaschine / Folding Machine Heidelberg Stahlfolder KD 78-4-KZ Year 1999 - Serial-No. 103638-258036 Arbeitsbreite max. 780mm / Working width max. 780mm Rundstapelanleger / Round Pile Feeder 1. Station 4 Taschen / 1. Station 4 buckles 2. Station 3 Schwerter links/rechts Auslage / 2. Station 3 knives left/right delivery Stehendbogenauslage / Delivery Stacker Stahl SBP 46 Rietschle Kompressor / Rietschle Compressor Inklusive Handbücher / Manuals included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Redomikq Ajpfx Afhecd

Condition: ready for operation (used), ABB Robotics, 2 x PS 60/4-50-P-LSS-3985 servo motor combination, serial numbers: 910.8090020-063 / 910.8090020-029, professionally and completely refurbished and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Redei D Eycopfx Afhscd

Condition: good (used), Winch rope, crane rope, lifting rope, wire rope, stainless steel rope, forestry winch rope -Crane rope: Demag wire rope Ø 16 mm -Length: 35.0 m -Item no.: P 600 H13 4/1 589 440 44 -Rope type: IWRC U(bk) Rcjdpfx Aozh Ehgsfhjd -other crane ropes also available -Transport dimensions: Ø 420 x 155 mm -Weight: 37.9 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer gearbox: Bonfiglioli type MVF 63/P -Speed speeds: approx. 29 rpm i= 45 -Manufacturer engine: Lafert type AFS 63/4 -Power: 0.22 kW / 1307 rpm -Design: B14 angle Rcodpferkp Nfsx Afhjd -Shaft: Ø 25 x 80 mm -Protection rating: IP 54 -Dimensions: 390/265/H195 mm -Weight: 13 kg