Used Panirecord P 200 for sale (52,306)

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Ncedpfowc Rk Eex Aqvot Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: ready for operation (used), Year of construction: 2004, operating hours: 23,291 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 750 mm, table length: 3,200 mm, table width: 1,400 mm, TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,400 mm Z-axis travel: 750 mm Table size: 3,200 x 1,400 mm Ncjdpfxjy R Dn Hs Aqvet MACHINE DETAILS Control type: CNC Control system: Heidenhain Operating hours Spindle run time: 23,291 h Program run time: 27,807 h Control on time: 83,301 h Machine on time: 73,907 h

Condition: new, functionality: fully functional, power: 300 kW (407.89 HP), overall weight: 65,000 kg, tire size: 6*2, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 3 axles, emission class: euro3, Year of construction: 2026, machine/vehicle number: V9638J96, Equipment: all wheel drive, hydraulics, onboard computer, Sand and Gravel Production Plant | MINGYUAN Heavy Industrial Equipment A sand and gravel production plant is an integrated system designed for producing high-quality construction aggregates, including sand, gravel, crushed stone, and artificial sand. MINGYUAN provides complete aggregate crushing and screening solutions for quarries, mining, construction, and infrastructure projects, ensuring efficient material processing and consistent output. General Introduction The MINGYUAN sand and gravel production line combines advanced crushing, screening, washing, and conveying equipment to process raw materials such as limestone, granite, basalt, river stone, and quartz into various sizes of construction sand and gravel aggregates. The plant typically includes jaw crushers, impact crushers, cone crushers, vibrating screens, sand washers, belt conveyors, and dust collectors, forming a complete and automated production system. It is widely used in road construction, concrete batching plants, building materials, and hydropower projects. Capacity range: 30–1000 tons per hour (customizable) Feed size: ≤800 mm depending on crusher type Output size: 0–5 mm (sand), 5–10 mm, 10–20 mm, 20–40 mm (gravel) Main equipment: Jaw crusher (PE/PEX series), cone crusher, impact crusher, VSI sand maker, vibrating feeder, vibrating screen, sand washing machine, belt conveyor, and control system Power configuration: Electric or diesel-driven options available Automation: PLC control with real-time monitoring and adjustable output ratio MINGYUAN Heavy Industrial Equipment Co., Ltd. provides complete sand and gravel production solutions with reliable performance, competitive price, and professional after-sales service for global customers in the mining, construction, and cement industries. 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. 4. Grading and Sorting: Nodpoq Nia Ijfx Aqvect - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. Keywords Sand production line, gravel production plant, aggregate crushing plant, stone crusher, sand making machine, sand washer, vibrating screen, jaw crusher, cone crusher, impact crusher, VSI crusher, quarry equipment, mining machinery, construction aggregates, artificial sand, crushed stone, river gravel, limestone crusher, basalt crusher, granite crusher, sand washing plant, screening plant, conveyor system, MINGYUAN sand plant, aggregate processing equipment, stone crushing line, sand and gravel washing system, high-efficiency crusher, environmental sand plant, aggregate production line manufacturer.

Condition: excellent (used), TruTool PN 200 electric hand cutting machine Product features The new TruTool PN 200 vibrating shear is mainly used for cutting C-L-U sections, trapezoidal sheet metal, etc. components. The device with a short tool for processing sheet metal with a profile depth of up to 85 mm and for C-L-U sections. Also for corrugated sheet metal. Ideal for hard-to-reach places. The working direction can be adjusted 360° easily and without tools in 45-degree steps. Minimized set-up time Replacement of punch and yoke without interruption and without tools. Unmatched speed Fast and efficient, 2.1 meters per minute at 400 N/mm2 structural steel. Application: Trapezoidal sheet metal For cutting profiles up to 86 mm deep and 132.5 / 40 mm wide. For straight and diagonal cuts. Profiles For cutting C-L-U profiles. Corrugated sheet For cutting and slitting. For bevel cuts and internal and radial cuts. - MAXIMUM SHEET THICKNESSES: - MAXIMUM THICKNESS OF 400 N/MM² STEEL SHEET: 2 mm. Ncsdpfx Aqeuhm E Sjvet - MAXIMUM THICKNESS OF STEEL 600 N/MM²: 1.5 mm - MAXIMUM THICKNESS OF STEEL SHEET 800 N/MM²: 1 mm - MAXIMUM THICKNESS OF SHEET METAL MADE OF ALUMINUM UP TO 250 N/MM²: 3 mm - RADIANCES: - LOWEST RADIUS: 50 mm - GENERAL INFORMATION: - OPERATING SPEED: 2.1 m/min. - NUMBER OF SHAKES AT NOMINAL LOAD: 1500 1/min. - INITIAL HOLE DIAMETER: 24 mm - RATED POWER CONSUMPTION: 550 W

Condition: new, functionality: fully functional, fuel type: hybrid, color: other, overall weight: 46,000 kg, Year of construction: 2026, *All of our products are carefully manufactured and have a 1-year warranty! *Installation and Operator Training are FREE! Njdpfx Aqjy S Alysvjct FTC-200-S Mobile Cone Crusher (With Screen); It consists of a feeding bunker, cone crusher and stock conveyor belt and generator. FTC-200-S Mobile Cone Crusher (With Screen), which is moved by remote control on a tracked chassis, successfully completes all commands given by the user by moving on its tracks in all kinds of difficult climate conditions and rough terrain. FTC-200-S Mobile Cone Crusher (With Screen), is precisely designed and carefully manufactured for stone crushing and is the leading mobile cone crusher in the sector with a crushing capacity of 100-200 T/H per hour. FTC-200-S Mobile Cone Crusher (With Screen) does not require an extra infrastructure as a production method, it is moved by remote control as mobile and adapts to all difficult terrain conditions. TECHNICAL SPECIFICATIONS: Model: FTC 200-S Crusher Type: Cone Crusher Vibrating Screen Size: 1300x3000 mm Production Capacity: 100-200 T/H Maximum Feed: 185mm Total Power: 300 kVA Weight: 46,000 Kg PLEASE CALL US FOR DETAILED INFORMATION!!!

Condition: new, functionality: fully functional, power: 197 kW (267.85 HP), fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MCC-200 is small efficient model of CC series, those are a mobile type & closed circuit crushing and screening plants that is used for processing of hard materials such as basalt, granite, gabbro, dolomite and other types of hard stones. TECHNICAL SPECIFICATIONS: -Bunker: 15m3 -Production Capacity: 150-250 Tons Per Hour -Crusher Type: Cone Crusher -Maximum Feeding Size: 180mm -Vibrating Screen Size and Deck: 1700x4500mm 3-4 decks -Total Motor Power: 197 kW MCC-200 is a combination of: • Bunker(Hopper) • Vibrating Feeder • Cone Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System Nedpfx Aqjy S Akisvect • Dust Suppression System • Easy walking platforms for maintenance Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 132 kW (179.47 HP), fuel type: electric, color: other, overall weight: 11,250 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Cone crusher product group is designed especially for the hardest material, cone crushers are one of the best choices for crushing river gravel, basalt and granite, along with abrasive materials in the mining industry. The working principle of cone crushers is to break the material by compression, by squeezing it between its walls, which are completely covered with resistant mantle and a bowl liner. It has longer life than other crushers thanks to its long life wear parts. Model: FABO CC200 Capacity: 200-250 t/h Max. Feed opening: EC 185 mm C 145 mm MC 115 mm M 90 mm MF 75 mm F 50 mm EF 35 mm Motor: 132 kW Head diameter: 1100 mm Dimensions (width * height): 2520* 2540 mm Countershaft Speed-rpm: 750-1200 Weight: 11230 kg * Hydroset Control * Automatic Load Protection * Practical discharge * High capacity cubic production * High-performance contactless labyrinth Nedpoy S Agwofx Aqvsct * High productivity, low energy production and lower wear costs, long service life and high product yield with desired fine powders. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, power: 22 kW (29.91 HP), pressing force: 200 t, stroke length: 800 mm, table width: 750 mm, table length: 1,000 mm, throat depth: 400 mm, Equipment: CE marking, documentation/manual, safety light barrier, 200 Ton C-Frame Hydraulic Press – CHCP 200 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 200 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, is designed for demanding production conditions, offering a high tonnage capacity, reinforced heavy-duty body structure, and superior performance. Key Advantages - Heavy-duty, high-strength steel frame construction - Stable operation with vibration-relieved structure - High precision (≤120 microns/meter) - PLC-controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life and low maintenance cost Application Areas - Heavy-duty metal forming - Deep drawing and stamping applications - High-tonnage die pressing - Cutting and punching operations - Automotive, defense, and heavy industry Standard Features - Stress-relieved, steel frame construction via vibration method - PLC control and touch panel - Argon welding applications - Certified welding in compliance with EN ISO 15614-1 / 2017 (WPQR & WPS approved) - Parallelism and perpendicularity tolerance in accordance with ISO & DIN standards (≤120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic centralized lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 200 - Press Force: 200 Tons - Stroke: 800 mm - Throat Depth: 400 mm - Table – Ram Distance: 900 mm - Table Size: 750 x 1000 mm - Press Depth: 1500 mm Ncedpfxjyzb Ede Aqvst - Press Width: 750 mm - Table Height from Floor: 1000 mm - Total Height: 2900 mm - Main Cylinder Diameter: Ø300 mm - Motor Power: 22 kW - Weight: 11,500 kg General Information - Country of Manufacture: Turkey - Warranty: 24 Months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 200 t, stroke length: 200 mm, table width: 1,000 mm, table length: 2,000 mm, warranty duration: 24 months, Equipment: safety light barrier, Eccentric presses are mechanical press types operated by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. H-type (straight-side) eccentric presses provide high stability and process safety for large table and heavy die applications, thanks to their rigid frame construction. CRONOSSTECH CEHP 200 – H-Type Eccentric Press 200 Ton is designed for stable operation in high-volume production, focusing on die protection and operator safety. Featuring a monoblock frame, 8-guided ram system, hydraulic overload safety, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 1000×2000 mm large table - Die/equipment protection with hydraulic overload safety - Controlled and user-friendly operation via PLC + touchscreen - High operator safety with light curtain protection (LEUZE) - Fast production change-over with 99 die memory settings Areas of Application - Punching/cutting/forming applications requiring a large table - Serial production with automated feeding lines - Heavy-duty dies and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch–brake • Additional bolted T-slotted plate • 8-guided ram Nedsx N Ruqjpfx Aqvjct • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse motion • Hydraulic overload safety device • Motorized ram adjustment mechanism • Light curtain protection • Enclosed oil reservoir with gear set • Double-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material discharge systems • Sliding safety door at table front • Dies with custom specifications ✅ TECHNICAL SPECIFICATIONS (CEHP 200 – 200 TON) Capacity: 200 Ton (CEHP 200) Lower table usable area: 1000×2000 mm Upper table usable area: 1000×2000 mm Stroke length (fixed): 200 mm Nominal material thickness: 7 mm Strokes per minute (SPM): 25–45 Max. shut height: 600 mm Min. shut height: 480 mm Side window dimensions: 600×600 mm Adjustment (ram adjustment): 120 mm Number of connecting rods: 2 pcs Number of eccentric shafts (cranks): 2 pcs Safety device: Hydraulic Switchgear brands: Siemens – Schneider Lubrication system: Automatic Display / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operation mode: 4-position Die memory: 99 settings Mounting type: Floor standing Body type: Monoblock Motor power: 22 kW (IE3) Motor speed (RPM): 1450 Approx. machine dimensions (L×W×D): 4600×3000×2000 mm Approximate weight: 28,000 kg Note: Please let us know if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and aftersales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 200 t, stroke length: 600 mm, table width: 800 mm, table length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 200 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial press solutions developed for sheet metal forming, straightening, assembly, and die stamping applications, offering high rigidity. Thanks to its 8-guided H-frame structure, loads occurring during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 200 model is specifically designed for medium to high-tonnage applications, providing reliable performance and long service life. CHP Series – Structural Features The CHP series presses are engineered considering heavy-duty operational conditions. The main frame and supporting parts are stress-relieved by vibration. Bronze Zr14 guide bushings ensure smooth ram movement and long-term precision. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 guides - Stress-relieved main frame and carrier parts by vibration - Bronze Zr14 guide bushings - WPQR & WPS welding applications approved by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination indicator - Monitoring of hydraulic unit oil temperature and system status via the screen - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER control components Nedpfxjx N T D Us Aqvect 📐 Technical Specifications – CHP 200 Type: Steel construction, H-frame press with 8 guides Frame Material: St52 – ERDEMİR Guide Bushing: Bronze Zr14 Capacity (Ram): 200 Tons Movable Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: Vibration stress relief Welding Application: WPQR and WPS approved by TÜRK-AK, with EN ISO 15614-1/2017 welding certificate (supervised by certified welding coordination engineers per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Rapid Down Speed (Movable Table): 150 mm/sec Bumping Speed (Movable Table): 12 mm/sec Return Speed (Movable Table): 170 mm/sec Main Cylinder Inner Diameter: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approximate Press Height: 3800 mm Approximate Press Width: 2950 mm Approximate Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Control Components: SIEMENS – SCHNEIDER Approximate Weight: 8 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condition: new, Year of construction: 2026, pressing force: 200 t, stroke length: 60 mm, table width: 400 mm, table length: 4,200 mm, stroke adjustment: 60 mm, warranty duration: 24 months, Equipment: safety light barrier, These presses and feeding lines, engineered for the door and window accessories sector and offered with both single and double operation capability, guarantee long-term, high-efficiency performance. In the window accessories industry—where high-volume production is essential—our presses, combined with our expertise, ensure maximum customer satisfaction. - Pressing force up to 400 tons - Table length up to 6000 mm - 2- or 3-connecting rod options - Automatic, constant fine lubrication with continuous return - Progressive lubrication block use Nsdsxrbmyepfx Aqvect - Front and rear press access - Sliding covers with magnetic sensors - Induction-hardened and ground gears - Gear-hub connections with conical locking PRESS: 200 TON STROKES: 40-70 RPM STROKE LENGTH: 60 MM MAXIMUM DIE HEIGHT: 340MM TABLE-RAM HEIGHT: 400MM ADJUSTMENT RANGE: 100MM TOP TABLE DIMENSIONS: 400X3000MM BOTTOM TABLE DIMENSIONS: 400X4200MM MOTOR: 18.5 KW MOTOR SPEED: 3000 RPM

Condition: new, Year of construction: 2025, power: 15 kW (20.39 HP), pressing force: 200 t, table width: 800 mm, table length: 1,100 mm, punching force: 200 t, drop-through hole in table: 220 mm, ram bore: 60 mm, stroke adjustment: 180 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press that operates by force generated through an eccentric mechanism in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type 200 Ton Eccentric Press is engineered for stable operation in cold forming applications. Its rigid steel frame construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for high-volume production. Key Advantages: - Consistent stroke performance and high repeatability in mass production - Operator-focused safety design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Production-ready operation with PLC control + dual-hand/foot control Application Areas: - Cold cutting and punching operations - Cold shearing applications - Metal forming with dies - High-volume production lines Ncsdpfx Aqovtyx Ievot ✅ STANDARD FEATURES • Steel frame construction • Four-way guided slide • Spheroidal cast iron connecting rod and gear bearings • Crankshaft and drive shafts made of 4140 tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directives compliant • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual-hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Complies with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD control panel (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One die set in requested specifications • Eight-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (200 TON) Capacity: 200 Tons Throat depth: 340 mm Distance between table and slide: 500 mm Distance between slide and table: 600 mm Width between uprights: 510 mm Slide adjustment (shut height adjustment): 130 mm Approx. press width: 1900 mm Approx. press depth: 2400 mm Approx. press height: 3000 mm Front anchoring dimension: 920 mm Side anchoring dimension: 1420 mm Table hole diameter: Ø240 mm Table dimensions: 680×1000 mm Die clamping hole diameter: Ø60 mm Slide dimensions: 620×350 mm Table height from floor: 805 mm Stroke adjustment: 20–140 mm Strokes per minute: 50 spm Motor power: 18.5 + 0.75 kW Motor speed: 1450 rpm Approximate weight: 9200 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE: This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 200 t, stroke length: 200 mm, table width: 1,000 mm, table length: 1,200 mm, warranty duration: 24 months, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, operated by force generated via an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process reliability thanks to their rigid frames. The CRONOSSTECH CEHP-TB-200 – H-Type Eccentric Press 200 Ton is designed for stable operation in high-volume production, with a focus on die protection and operator safety. Its monobloc frame, 8-guided ram system, hydraulic overload protection, and automatic lubrication infrastructure deliver reliable performance suited for continuous production environments. Key Advantages - Stable operation with large dies, thanks to the 1200×1000 mm table size - Die and equipment protection via hydraulic overload safety - Controlled and user-friendly operation via PLC and touch screen - Enhanced operator safety with a light curtain system - Low maintenance requirement with automatic lubrication system Areas of Application - Punching / cutting / die forming applications - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Welded steel frame • Pneumatic clutch and brake • T-slot additional mounting plate • 8-point ram guidance • Adjustable stroke on single connecting rod • Ram counterbalance cylinder • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touch LCD display • Motor reverse • Hydraulic overload protection • Motorized ram adjustment • Light curtain safety system • Enclosed oil reservoir with gear set • Dual coil safety valve • CE compliance ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety cover at table front • Custom die specifications ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-200) Capacity: 200 tons Table-to-ram distance: 500 mm Housing width: 1230 mm Ram adjustment: 120 mm Ncsdpfox N Sccsx Aqvet Press width: 2900 mm Press depth: 2550 mm Press height: 4600 mm Table dimension: 1200×1000 mm Ram face size: 1200×1000 mm Fixed stroke: 200 mm Motor power: 30 kW Weight: 24,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 200 t, stroke length: 800 mm, table width: 1,000 mm, table length: 1,000 mm, clearance between the columns: 1,000 mm, retraction force: 70 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 200 / 70 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 200 / 70 ton four-column hydraulic deep drawing press is a high-rigidity, four-column hydraulic press designed for metal forming, deep drawing, and precision pressing applications. The St52 grade welded steel frame is subjected to stress relief via vibration, ensuring high parallelism and perpendicularity tolerances are maintained over extended operation. The ram and blank holder (pot) systems are operated independently, with stroke and pressure settings precisely adjustable via touchscreen control panel. Equipped with REXROTH or PARKER hydraulic components, an IE3 class motor, and PLC-controlled structure, the system offers high efficiency and reliable operation. An automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements. With its 200 / 70 ton capacity, this model provides an ideal industrial solution for medium and heavy-duty metal forming, deep drawing, and die applications. Key Advantages - Rigid four-column press frame - Independent stroke and tonnage adjustment for ram and blank holder - Full control via touchscreen panel - High precision and repeatability - Long-lasting, low-maintenance design Applications - Metal forming operations - Deep drawing applications - Die trial and production lines - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMIR grade COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction hardened and chrome plated SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 200 Ton CAPACITY (BLANK HOLDER): 70 Ton DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter STROKE (RAM): 800 mm STROKE (BLANK HOLDER): 200 mm MIN. OPENING HEIGHT: 100 mm MAX. OPENING HEIGHT: 900 mm WELDING STRESS RELIEF: By vibration WELDING PROCEDURE: WPQR & WPS with TURK-AK accreditation – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 22 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT: 150 mm/sec FORMING SPEED: 12 mm/sec RETURN SPEED: 170 mm/sec BLANK HOLDER FORWARD SPEED: 30 mm/sec Ncodox N Umqopfx Aqvst MAIN CYLINDER BORE: Ø 320 mm – Ck45 BLANK HOLDER CYLINDER BORE: Ø 190 mm – Ck45 AUXILIARY SPEED-UP CYLINDERS: 2 units PRESS APPROX. DIMENSIONS: 4000 × 1450 × 1450 mm LOWER TABLE HEIGHT FROM FLOOR: 1300 mm MAIN CHARGE VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCHSCREEN PANEL: DELTA 7” CONTROL COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 14.5 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 600 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,500 mm, retraction force: 200 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 600/200 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-guideway H-frame structure provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the extended stroke length. Model CHSP 600/200, featuring a 600-ton main ram and a 200-ton blankholder (cushion) capacity, is designed to ensure full control over the die and component during high-tonnage deep drawing and spinning operations. The frame structure is stress-relieved by vibration for durable and reliable performance. ⚙️ Standard Equipment - Welded steel construction, 8-guideway H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welding by TÜRK-AK-accredited procedures (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing to CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter clogging warning - On-screen display of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications — CHSP 600/200 - Type: Welded steel, 8-guideway H-frame press body - Frame Material: St52 – ERDEMİR grade - Slide Bearings: Bronze Zr14 - Capacity (Ram): 600 tons - Capacity (Cushion): 200 tons - Movable Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Ram Stroke: 1000 mm - Cushion Stroke: 350 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Weld Stress Relief: By vibration - Welding: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1:2017), supervised by certified “welding coordination engineers” (EN ISO 14731) - Max. Working Pressure: 250 bar - Total Motor Power: 55 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Fast Down Speed: 150 mm/s - Movable Table Drawing Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Cushion Advance Speed: 30 mm/s - Main Cylinder Bore: Ø550 mm – Ck45 - Cushion Cylinder Bore: Ø320 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 5900 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2300 mm - Lower Table Height from Floor: 1400 mm - Pre-fill Valve: NG 150 Ncjdpjx N Uhzjfx Aqvot - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Scale: NOVATECHNIK or TURCK - PLC System: DELTA - Touch Panel Screen: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approx. Weight: 35 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 200 t, stroke length: 800 mm, table width: 1,000 mm, table length: 1,200 mm, retraction force: 70 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 200/70 H-Type Hydraulic Deep Drawing (Flanging) Press – 8 Slideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and flanging applications. The 8-slideway H-frame construction provides maximum rigidity during pressing operations, maintaining parallelism and perpendicularity tolerances consistently throughout the stroke. The CHSP 200/70 model, featuring a 200-ton main ram and a 70-ton lower blank holder (pot) capacity, is engineered for medium-to-high tonnage deep drawing and flanging processes. The frame structure undergoes vibratory stress relief for long-lasting and reliable performance. ⚙️ Standard Equipment - Steel construction, H-frame press body with 8 slideways - Vibratory stress-relieved frame - Bronze Zr14 slideway bearings - Welding processes verified by TÜRK-AK accredited WPQR and WPS certificates (EN ISO 15614-1:2017 / EN ISO 14731 compliant) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and pot stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety interlock systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 200/70 Type: Steel construction, H-frame with 8 slideways Frame Material: St52 – ERDEMIR Slideway Bearings: Bronze Zr14 Capacity (Ram): 200 tons Capacity (Pot): 70 tons Movable Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 microns/meter Perpendicularity Tolerance: 60 microns/meter Ram Stroke: 800 mm Pot Stroke: 300 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Weld Stress Relief: Vibratory stress relief Welding Application: WPQR and WPS certified by TÜRK-AK according to EN ISO 15614-1:2017 (Supervised by certified "welding coordination engineers" as per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Rapid Down Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Pot Table Forward Speed: 30 mm/s Main Cylinder Bore: Ø320 mm – Ck45 Pot Cylinder Bore: Ø190 mm – Ck45 Auxiliary Acceleration Cylinders: 2 Units Approx. Height of Press: 3800 mm Approx. Width of Press: 2950 mm Approx. Depth of Press: 2200 mm Distance from Floor to Lower Table: 1350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Scale: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 13.5 tons Nsdpfx Aqex N T U Tovsct Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 06/2028, input frequency: 50 Hz, type of input current: three-phase, power: 13.5 kW (18.35 HP), electrical fuse: 32 A, NEW +++ NEW Dough Mixer NEW +++ NEW Spiral Mixer Spiralo 200 A Proven technology... already successfully used in many applications! Ncodpotpfxnjfx Aqvet LED control with program control 2 speeds + 1 reverse function, 3 timer switches Dough capacity from 15 to 200 kg / 10-120 kg flour Flour dust hood with safety circuit Dough machine with stainless steel bowl and spiral Stand mixer with base plate 1 removable bowl trolley Only available from us, DGUV V3 certified Connection: 400V, 32A-CEE plug Dimensions: 1020 x 1720 x 1430/1945 mm, WxDxH Top quality and price in one machine! New machine & SAB inspected With 24 months warranty + spare parts service Option: Leasing & rental service Additional bowl trolley 200 Soft starter Maintenance contract Service package E-Box Delivery service Instruction & commissioning Many more top spiral mixers in stock!

Condition: excellent (used), CATALOG NUMBER 6650 Ncjdpfx Aqoy Sn Rzevet TECHNICAL DATA - Max cutting height: 200 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm - Min. blade diameter: 250 mm - Max. blade diameter: 350 mm - Max. width of cant: 870 mm - Min. length of cant: 1500 mm From above: - Pawls - Feed shaft, toothed, metal - Pawls - Feed shaft, toothed, metal - Pressure unit - Shaft with saw blades - 2 feed shafts, metal, pneumatically pressed From below: - Guide - Metal sliding roller - Pawls - Track - Shaft with saw blades - Track - Stepless feed speed adjustment via inverter 4-40 m/min - Main motors: 2 x 75 kW - Feed motor: 3 kW - Electric vertical movement of body up/down: 0.55 kW - Electric adjustment of saw blade shafts: 2 x 0.25 kW - Central lubrication - Extraction nozzle diameter: 2 x 300 mm - Dimensions (L/W/H): 3100 x 2600 x 2000 mm - Weight: approx. 6500 kg - Centering device included - Toothed feed rollers: 3 pcs - Smooth feed rollers: 8 pcs - Motor: 2 x 1.5 kW - Pneumatic top pressure - Side pressure - Dimensions (L/W/H): 4850 x 1100 x 1800 mm - Weight: approx. 1000 kg ADVANTAGES – Czech manufacture – Double-shaft design – Centering device – DTR documentation – Year of manufacture: 2010 – Used multi-blade saw, in very good condition Net price: 262,900 PLN Net price: 62,600 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: new, Gero F 100-200/12SO high temperature furnace 201101895 - 30 - 3000°C / Cable length green: 3.9 m, connection cable: 3.00 m, used, good condition, 100% functional, scope of delivery as per photos Njdpfx Aqex Erpnsvect

Condition: good (used), Year of construction: 2007, CNC gantry plasma cutting machine Manufacturer: Microstep Type: SPL-P 12001.20 Year of manufacture: 2007 CNC control 1 plasma torch with Kjellberg HiFocus 160i power source Extraction table: 2 x 12 m Filter system: Donaldson Torit DCE 19526ä Ncjdpfjuv Hkgsx Aqvst

Condition: used, Year of construction: 2000, turning diameter 400 mm turning length 1000 mm Ncedovh I T Aopfx Aqvot control FAGOR control CNC 8055/B-T centre height 200 mm centre distance 1000 mm turning dia. over face-slide 210 mm bed width 300 mm spindle bore 65 mm spindle turning speed range 0 - 3000 U/min transmission ratio 2 feeds - longitudinal 0 - 10.000 mm/min feeds - cross 0 - 10.000 mm/min rapid travel - longitudinal/face 15 m/min tailstock quill diameter 68 mm tailstock quill stroke 155 mm tailstock taper MT 4 total power requirement 8 kW dimensions 3,1 x 1,9 x 1,78 m Accessories: 3-jaw chuck 200 mmø, MULTIFIX-tool post with various inserts, coolant

Condition: used, Year of construction: 1988, pressure 200 t throat 450 mm stroke 30 - 140 mm table surface area 1100 x 850 mm dayligth 500 mm ram surface 800 x 600 mm ram adjustment 110 mm tool hole in ram Durchm. 65 x Tiefe 105 mm Nedpfx Aqovb I Itovoct no. of strokes 45 Hub/min total power requirement 15 kW weight of the machine ca. 14,2 t dimensions of machine L x W x H 3,18 x 2,09 x 3,05 m

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Nodpfx Aqewva I Hovoct Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz Ncjdpfxedzp Tce Aqvet - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: new, functionality: fully functional, gearing type: other, fuel type: diesel, color: green, emission class: none, mast type: other, brakes: other, suspension: other, Year of construction: 2026, Equipment: low noise, TICAB Bitumen Emulsion Sprayer – 200 L / 500 L | Professional Asphalt Repair Equipment TICAB Bitumen Emulsion Sprayer 200 L and 500 L is a reliable and efficient solution for road maintenance, asphalt repair, pothole patching, crack sealing preparation, and surface dressing. Designed for professional use, this bitumen sprayer ensures uniform application of bitumen emulsion, asphalt emulsion, tack coat, and bonding agents, significantly improving adhesion and extending pavement service life. Key Advantages: • Tank capacity options: 200 liters / 500 liters • Precise spraying system for even and controlled application • Suitable for bitumen emulsion • Ideal for road repair companies, municipalities, contractors, and utility services • Compact, mobile, and easy to operate • Reduces material consumption and labor costs • High-quality components for long service life • Manufactured by TICAB – proven European road equipment manufacturer Typical Applications: Ncodpfx Aqjx Uxfujvjt • Pothole repair and patching works • Crack sealing preparation • Asphalt bonding layer before paving • Surface dressing and maintenance works • Road, parking lot, driveway, and industrial area repairs TICAB Bitumen Emulsion Sprayers are a cost-effective choice for companies looking for professional asphalt maintenance equipment with excellent performance and durability. Contact us for price, availability, delivery options, and technical details.