Used Paragon Rc-12Nc for sale (3,403)

Condition: used, functionality: fully functional, machine/vehicle number: 2482758, Year of construction: 2021, load capacity: 5,000 kg, lifting height: 3,000 mm, free lift: 150 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,940 mm, power: 54.4 kW (73.96 HP), motor manufacturer: Kohler, gearing type: hydrostat, fork carriage width: 1,380 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 55 mm, turning radius (inner): 2,830 mm, front tire size: 300x15, rear tire size: 700-12, overall weight: 7,150 kg, total height: 2,940 mm, total length: 3,000 mm, total width: 1,480 mm, color: orange, Equipment: cabin, pallet forks, Technical data - Year of manufacture: 2021 - Travel speed with/without load: 24 km/h - Cabin roof made of plastic, with heating - Number of valves: 3 - Rated capacity/rated load: 5,000 kg Podpfx Aieyqzlnsrerc - Load center distance: 500 mm - Load distance: 567 mm - Axle load loaded: 10,780/1,360 kg - Axle load unloaded: 3,300/4,060 kg - Track width: 1,180 mm - Track width: 1,190 mm - Tilt of mast/fork carriage α/β (degrees): 6/12 - Seat height relative to SIP/stand height: 1,315 mm - Coupling height: 380 mm - Aisle width for 1000 x 1200 mm pallets, crosswise: 4,597 mm - Aisle width for 800 x 1200 mm pallets, lengthwise: 4,797 mm - Turning radius: 2,830 mm - Lift height: 3.00 m - Minimum turning point distance: 900 mm - Travel speed loaded/unloaded: 22/24 km/h - Lifting speed loaded/unloaded: 0.45/0.49 m/s - Lowering speed loaded/unloaded: 0.38/0.26 m/s - Traction force loaded/unloaded: 28/21 kN - Gradeability loaded/unloaded: 20/20 % - Service brake: mechanical/hydraulic - Rated RPM: 2,200 l/min - Number of cylinders: 4 - Displacement: 2,482 cm³ - Emission level according to EU Regulation 2016/1628 Stage III a - Onboard voltage: 12 V - Drive unit type: torque converter - Operating pressure for attachments: 200 bar - Oil flow for attachments: 101 L/min - Fuel tank capacity: 90 L - Tow coupling type: DIN 15170 pin

Year of construction: 2008, operating hours: 1,850 h, condition: ready for operation (used), table load: 750 kg, Machine tool manufactured in 2008. This BVL RC 1950 RW 2T features a useful length of 1545 mm, a maximum useful width of 1545 mm, and a maximum useful height of 1000 mm. It includes a 2-tank system for washing and rinsing, with a wash tank capacity of 825 liters and a rinse tank capacity of 825 liters. If you are looking to get high-quality washing capabilities, consider the BVL RC 1950 RW 2T machine we have for sale. Contact us for further details. • Useful length: 1545 mm • Max. useful width: 1545 mm • Max. useful height: 1000 mm • Basket diagonal: 2319 mm • Operating voltage: 3 x 400 V, N+PE, 50 Hz • Tank configuration: 2-tank system (wash & rinse) • Wash tank capacity: 825 liters Pjdpfx Aey Izx Dsirerc • Wash tank heating: 24 kW (electric) • Wash spray pressure: 4.5 bar • Wash pump: FHE 40-200/75 (7.5 kW) • Rinse tank capacity: 825 liters • Rinse tank heating: 18 kW (electric) • Rinse spray pressure: 3.0 bar • Rinse pump: FHE 32-200/30 • Level control: LIQUIFANT FTL 260 • Filter mesh (wash): 2 mm • Filter mesh (rinse): 1 mm • Detergent dosing: Diaphragm dosing pump Alpha 1001 • Fan motor: 2.6 kW • Drive motor: 0.37 kW with brake Additional equipment • Mobile pull-out table with rollers for basket handling

Condition: excellent (used), Year of construction: 2000, Vollmer RC 100 straightening center Podpsvw Nb Tefx Airerc

Condition: new, Year of construction: 2025, functionality: fully functional, grinding width: 1,300 mm, grinding height: 160 mm, height adjustment type: electric, grinding belt length: 2,150 mm, Heesemann JSM 1350 RC Surface grinding machine Pedpfswcqr Aox Airerc Built in 2025, new machine, currently the only exhibition machine in Europe! - Electric height adjustment via terminal: 3 - 160 mm - Continuous feed: 3 - 12 m/min - Sanding units with separate motors and continuously variable sanding belt speeds up to 18 m/s - Table extensions at the infeed and outfeed - 15.6" industrial PC - Program memory for 100 programs - Remote maintenance - Contact roller unit with steel roller Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Front calibration deflection roller Ø 160 mm, rubberized (65° Shore hardness), grooved - Energy Management System EMS - Doors with glass inserts - LED lighting inside the machine - Vacuum table with preparation (drilled holes) for connecting the vacuum blower - Vacuum blower (inside the machine) - Workpiece cleaning with oscillating blower tube - CSD (magnetic pressure bar) The machine is connected and can be inspected on-site by appointment. Please do not hesitate to contact us if you have any questions.

Year of construction: 2024, condition: new, The rolls cruhser RC 200 is ideally suited for crushing medium-hard, brittle, hard samples like coal, ore, slage, minerals, graphite and many more. Max. feed size* Pjdpfxsf Ulyco Airjrc

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, spindle speed (max.): 8,000 rpm, travel distance Z-axis: 140 mm, counter spindle speed (max.): 8,000 rpm, number of axes: 5, Equipment: bar feeder, TECHNICAL DETAILS Pedpfjycp Nljx Airerc Number of axes: 5 Number of spindles: 2 Main spindle Max. bar diameter: 16 mm Z-axis travel: 140 mm Spindle speed: 8,000 rpm Spindle drive power: 2.2 kW Number of tool positions: 13 Sub-spindle Max. bar diameter: 12 mm Spindle speed: 8,000 rpm Number of tool positions: 4 MACHINE DETAILS Control: FANUC 18i-T Operating hours: 32,000 h EQUIPMENT FMB Minimag bar loading magazine Note: Dismantling and loading can be carried out by the seller for €1,500.

Condition: used, fuel type: gas, Year of manufacture: 2012 Predpfx Aiozfnbwjrsc Lifting capacity: 3.000 kg Please contact Gebrauchtgeräte Center for more information

Condition: new, functionality: fully functional, overall weight: 52,000 kg, total length: 10,400 mm, total width: 6,800 mm, workpiece length (max.): 3,700 mm, workpiece height (max.): 2,200 mm, Breton Paragon is the multi diamond wire machine for sawing marble or granite blocks, cutting slabs in slight thickness Prodpfx Aoxdh Rcsirjc Multi diamond wire machine to cut 20 or 30 mm thick slabs. The structural robustness combined with the characteristic triangle system makes it possible to saw marble and granite blocks to make slabs of various thicknesses. Price from €uro 500.000

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 35 kg, arm reach: 1,831 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (A-Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: three-phase, repeat accuracy: 0.03 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information: Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-35P is based on Fanuc M-20iD/35 robot arm adapted for handling pallets or vises. It consists of: 1) Robot: Fanuc robot M20iD/35 6-axis vertical robot Load capacity 35 kg / reach 1831mm R-30iB Plus controller A-cabinet I/O modules; DI32 / DO32 DCS Dual Check Safety Position (J567) Soft Float (J612) Touch Skip (J921) Singularity Avoidance (R792) User Socket Messaging (R648) Karel (R632) 2) Loader Table: Compact but heavy loader table with front entrance. Table size: 980 x 700 mm Docking station with four pockets Three locating pins for quick pallet exchange Predpfxs Af Uxxo Airsc ReeR safety light curtain, Cat. 4 Three control buttons LED status beacon Electrical cabinet and cables included 3) Pallet Rack The URC-35 Palletizing cell can be equipped with 1 or 2 large-capacity racks with 42 pockets. Large rack (42 pockets) - included as standard Second large rack (42 pockets) - optional 4) Vices & Zero-point clamping system The system is designed for: - Lang Vices (not included in price) - Lang Zero-Point clamping system (not included in price) - Note: it can also be implemented to work with pallets instead of vices (not included in price) 5) Safety Options: Cage (standard) ReeR safety light curtains (cat.4) on Loader table (standard) Plexiglass cover on Racks (standard) ReeR Mosaic M1 safety controller (standard) 6) Interface to the Haas machines Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged) Communication CNC < = > URC (I/O, safety, program call -> all via Ethernet cable communication) Preparing for a Clamping device Preparing for a PAD Preparing for an external Air Blow 7) Gripper Configuration The Teximp Gripper Interface includes everything needed for gripping the vices Gripper carrier Schunk Gripper JGP-P 160-2 Stroke per jaw [mm] = 8 Recommended workpiece weight [kg] = 24.5 Preparation for vice/pallet clamping Sensors for gripper state detection - clamped/unclamped Blower nozzle Laser sensor (for vise presence detection) 8) Automatic Door system URC-35 Palletizing can be equipped with a pneumatic auto door (PAD) for selected Haas machines. Available PAD models include: a) PAD-HaasUMC-side b) PAD-HaasVF-side c) Can be made for other machines (not included in price) 9) Programming Option (HMI) Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Important Note: Operators can easily assign different .nc machining program to each Vise via HMI, robot calls assigned program on CNC machine by scanning QR code on each vise! - Easy visual programming - No additional hardware required Note: - We provide transport, installation, commissioning and operator training at additional cost. - You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 12 kg, arm reach: 1,441 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (A-Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: three-phase, repeat accuracy: 0.02 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information: Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-12D is based on Fanuc M-10iD/12 robot arm suitable for middle size machines and specifically adapted for handling vices. It consists of: 1) Robot: - Fanuc robot M-10iD/12 6-axis vertical robot Load capacity 12 kg / reach 1441mm R-30iB Plus controller A-cabinet I/O modules; DI16 / DO16 DCS Dual Check Safety Position (J567) Soft Float (J612) Touch Skip (J921) Singularity Avoidance (R792) User Socket Messaging (R648) Karel (R632) 2) Drawer palletizing system: Usable space per one drawer: 1000 x 480mm Max 5 drawers (depends on the height of the pieces) Load capacity of one drawer: 250 kg Reer safety light curtain, cat.4 Drawer opening possible from both sides LED status beacon Electrical cabinet and cables 3) Safety Options Predpfx Aij Af Iiwjrjc The Cage is our standard solution. All URC cells can also be delivered in the "Laser" version, which is designed for optimal accessibility. The price of the cells remains the same regardless of the chosen version. - Cage (Standard) - Omron Laser (Alternative) - Reer Light Curtain (Standard) 4) Interface to the Haas machines Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged) Communication CNC < = > URC, I/O, M-fin, safety Preparing for a Clamping device (2nd clamping device available) Preparing for a PAD Preparing for an external Air Blow 5) Gripper Configuration The Teximp Gripper Interface includes everything needed for clamping parts on the robot side. - Gripper carrier 90° Schunk Gripper JGP-P 100-2 (2 pcs) Stroke per jaw [mm] = 5 Recommended workpiece weight [kg] = 8.75 ABR-PGZN-plus 100 blanks made of aluminum for rework by the customer Sensors G1/G2 - clamped/unclamped Blower nozzle Other possibility: - Gripper carrier 180° Schunk Gripper JGZ 100-1 (2 pcs) Stroke per jaw [mm] = 10 Recommended workpiece weight [kg] = 9 Sensors G1/G2 - clamped/unclamped (4 pcs) Blower nozzle 6) Automatic Door system Our robot cell includes an Auto Door for any Haas machine, with two available solutions: the original Haas Smart CAN DC Auto Door for machines built in 2020 and later, or Teximp’s Pneumatic Auto Door for older machines. PAD-HaasVF-side PAD-HaasVF-front PAD-HaasMM-front PAD-HaasST PAD-HaasUMC - PADs for machines without the original side door/window are also available. 7) Programming Option (HMI) Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Operators can easily adjust jobs for different products/parts and then save them as "Recipes", enabling a complete robot setup change with just one click on the screen. This simplifies the programming process and minimizes downtime. - Easy visual programming - No additional hardware required Note: - We provide transport, installation, commissioning and operator training at additional cost. - You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.

Condition: good (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 123 kW (167.23 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,012 kg, input voltage: 400 V, total width: 1,200 mm, total length: 2,960 mm, total height: 2,000 mm, warranty duration: 6 months, Aircooled chiller RC GROUP PYXIS U 128 P2 S U3 123 KW Cooling capacity: 123 kW / 34.97 tons (12/7 — 35°C) Year of manufacture: 2016 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Copeland ZP295KCE-TWD-522 (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (Frequency inverter) Dimensions: 2.96x1.2x2 m. Weight: 1012 kg. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS Pjdpfx Aezwvf Isirorc The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2024, functionality: fully functional, Biesse ROVER C 1982 CNC Machining center (5-axis) Description; Working fields X = 8125 mm; Y =1950 mm Z= 470/500 mm UPS Closed chain cable holder X-axis 12 ATS Panel supports 48 sliding bases Pneumatic locking system in 2 work areas in X 8 aluminium lifting bar supports for loading ease of large and heavy pieces. 290 m3/h rotary claws vacuum pump Vacuum module - Size 132x146 - H74mm Vacuum module - Size 132x75 - H74mm Vacuum module - Size 132x54 - H74mm Belt conveyor for the removal of chips and off-cuts 21.6 kW (29.4 HP) operating unit with 5 interpolating axes HSK F63 adaptor and liquid cooling Psdpe Af Ii Nefx Airerc Suction hood with continuous positioning in Z controlled by NC Air-Jet cooling system Liquid chilling unit for liquid cooled systems Chain tool changer with 22 places at 180 mm centerdistance Strengthened gripper PC bTouch Presetter for the measurement of the tool length with diameter up to 130 mm bSolid 3D CAD-CAM program Additional license for bSolid Additional filter for vacuum pump SOPHIA - IoT Connection Roller lifting support in replacement of the standard one Enlargement of mesh guards and movement of the doors from front side to rear side to load profiles with length up to 11 meters (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: like new (used), Year of construction: 2014, operating hours: 58 h, functionality: fully functional, load capacity: 7 kg, arm reach: 800 mm, controller manufacturer: kuka, controller model: C4 Sunrise, teach pendant manufacturer: kuka, input voltage: 220 V, ROBOT ARM MANUFACTURER: KUKA MACHINE TYPE: LBR iiwa 7 R800 MODEL YEAR: 2014 TECHNICAL SPECIFICATIONS PAYLOAD: 7 KG Prods Ad Na Ajpfx Airsc MAX. REACH: 800 MM CONTROLLER: KRC4 SUNRISE Operating Time (h): 58

Year of construction: 2013, condition: good (used), robot Engel Viper 20 RC 200 X= 700mm Y= tandem 1500mm Z= 2840mm B + C Servo Podpfehqmpxjx Airerc year: 2013 price: 7.500€ contact person: Mr. Rainer Eckerle

Condition: ready for operation (used), Year of construction: 2003, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 000163, color channels: CMYK, paper weight (min.): 45 g/m², paper weight (max.): 80 g/m², total length: 16,000 mm, total width: 3,500 mm, total height: 4,500 mm, space requirement length: 20,000 mm, space requirement width: 6,000 mm, space requirement height: 6,000 mm, year of last overhaul: 2020, type of input current: three-phase, input voltage: 380 V, cutting length (max.): 630 mm, section length (max.): 1,000 mm, Equipment: documentation/manual, kitap,jurnal,gazet çap enjam.Sagatda nominal25000 şertli önüm.(maksimal 35000 çenli)tizlik.wertikal gurnama çap guraly 4+4CMYK. Jf35 epleýjili,63sm kesiji,üç görnüş epleýiş,doly işjeñ ýagdaýda.Rulon oturtma iki rulonly.4+4 CMYK Pedpfxsz A Uz Aj Airorc

Year of construction: 2012, condition: good (used), robot Engel Viper 20 RC 200 X= 700mm Y= tandem 1500mm Z= 2840mm B + C Servo year: 2012 Prodpfxegpwgaj Airoc price: 9.400€ contact : Mr. Rainer Eckerle

Year of construction: 2012, condition: good (used), robot 40 RC 200 X= 700mm Y= tandem 1600mm Z= 3320mm B + C Servo year: 2012 price: 8.900€ Pedpfx Ajgkvtxoirsrc contact person: Mr. Rainer Eckerle

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 12 kg, arm reach: 1,441 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (A-Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: three-phase, repeat accuracy: 0.02 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information: Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-12 is based on Fanuc M-10iD/12 robot arm suitable for middle size machines. It consists of: 1) Robot: - Fanuc robot M-10iD/12 6-axis vertical robot Load capacity 12 kg / reach 1441mm R-30iB Plus controller A-cabinet I/O modules; DI16 / DO16 DCS Dual Check Safety Position (J567) Soft Float (J612) Touch Skip (J921) Singularity Avoidance (R792) User Socket Messaging (R648) Prode Afx Ryepfx Airec Karel (R632) 2) Part Table: Compact but heavy part table with front entrance. Table size 980 x 700mm Three pins for quick pallet changing Reer safety light curtain, cat.4 Control button 3 LED status beacon Electrical cabinet and cables 3) Safety Options The Cage is our standard solution. All URC cells can also be delivered in the "Laser" version, which is designed for optimal accessibility. The price of the cells remains the same regardless of the chosen version. - Cage (Standard) - Omron Laser (Alternative) - Reer Light Curtain (Standard) 4) Interface to the Haas machines Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged) Communication CNC < = > URC, I/O, M-fin, safety Preparing for a Clamping device (2nd clamping device available) Preparing for a PAD Preparing for an external Air Blow 5) Gripper Configuration The Teximp Gripper Interface includes everything needed for clamping parts on the robot side. - Gripper carrier 90° Schunk Gripper JGP-P 100-2 (2 pcs) Stroke per jaw [mm] = 5 Recommended workpiece weight [kg] = 8.75 ABR-PGZN-plus 100 blanks made of aluminum for rework by the customer Sensors G1/G2 - clamped/unclamped Blower nozzle Other possibility: - Gripper carrier 180° Schunk Gripper JGZ 100-1 (2 pcs) Stroke per jaw [mm] = 10 Recommended workpiece weight [kg] = 9 Sensors G1/G2 - clamped/unclamped (4 pcs) Blower nozzle 6) Automatic Door system Our robot cell includes an Auto Door for any Haas machine, with two available solutions: the original Haas Smart CAN DC Auto Door for machines built in 2020 and later, or Teximp’s Pneumatic Auto Door for older machines. PAD-HaasVF-side PAD-HaasVF-front PAD-HaasMM-front PAD-HaasST PAD-HaasUMC - PADs for machines without the original side door/window are also available. 7) Programming Option (HMI) Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Operators can easily adjust jobs for different products/parts and then save them as "Recipes", enabling a complete robot setup change with just one click on the screen. This simplifies the programming process and minimizes downtime. - Easy visual programming - No additional hardware required Note: - We provide transport, installation, commissioning and operator training at additional cost. - You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.

Condition: used, fuel type: electric, Year of manufacture: 2016 Please contact Gebrauchtgeräte Center for more information Pedozfn Rfepfx Airsrc

Condition: used, Brand and Model: ACME GOZUA RC 2-75 Type: CENTERLESS HYDRAULIC CYCLES Intermitten ( with stop at the end of the cycle.) Total time for fast feed, slow grinding feed, and stop at the feed carriage setting ( adjustable by timer) 1 to 100 sec.. Psdpfxezq Sfkj Airorc DIAMOND CUTTING Maximum diameter difference in copy: 8 mm Total tMaximum copy taper : 30º COOLING EQUIPMENT Pump flow rate : 45 l /min Tank capacity: 100 l Decanting compartments : 4 EXTERNAL AND MAIN DIMENSIONS Total machine length: 2.350 mm Total machine width : 1.560 mm Total machine height: 1.450 mm Height of the grinding wheel axes 1.050 mm. External dimensions of shipping packaging : 2.400x1.700x1.600 mm Shipping packaging volume: 6.53m3 WEIGHTS Net: 2.340 kg Gross with cage packaging : 2.445 kg Gross with shipping packaging: 2.485 kg

Year of construction: 2024, condition: new, The roller crusher RC 300 is ideal for crushing medium-hard, brittle, hard materials such as coal, ores, slag, minerals, graphite, bitumen and many more. Prodpfxoiamtte Airjc

Year of construction: 2024, condition: new, The rolls crusher RC 100 is ideal for crushing medium-hard, brittle, hard materials such as coal, ores, slag, minerals, graphite, bitumen and many more. Prsdpfx Aisiamtajroc

Condition: used, functionality: fully functional, machine/vehicle number: 2482768, Year of construction: 2021, load capacity: 4,000 kg, lifting height: 3,000 mm, free lift: 150 mm, fuel type: diesel, mast type: triplex, construction height: 2,940 mm, power: 54.4 kW (73.96 HP), motor manufacturer: Kohler, gearing type: hydrostat, fork length: 1,200 mm, front tire size: 300 x 15, rear tire size: 7.00-12, overall weight: 7,150 kg, total height: 2,940 mm, total length: 3,000 mm, total width: 1,480 mm, color: orange, Equipment: additional headlights, cabin, front guard, pallet forks, sideshift, Technical Data - Year of manufacture: 2021 - Speed with/without load: 24 km/h - Cabin roof made of plastic, with heating - Number of valves: 3 - Rated capacity: 5000 kg - Load center distance: 500 mm - Load distance: 567 mm - Axle load (laden): 10,780 / 1,360 kg - Axle load (unladen): 3,300 / 4,060 kg - Track width: 1,180 mm - Track width: 1,190 mm - Mast/Carriage tilt (α/β°): 6/12 - Seat height in relation to SIP/stand height: 1,315 mm - Coupling height: 380 mm - Aisle width for pallets 1000 x 1200 crosswise: 4,597 mm - Aisle width for pallets 800 x 1200 lengthwise: 4,797 mm - Turning radius: 2,830 mm - Lift height: 3.00 m - Smallest pivot point distance: 900 mm - Travel speed laden/unladen: 22/24 km/h - Lift speed laden/unladen: 0.45/0.49 m/s - Lowering speed laden/unladen: 0.38/0.26 m/s - Tractive force laden/unladen: 28/21 kN - Gradeability laden/unladen: 20/20 % - Service brake: mechanical/hydraulic - Rated speed: 2,200 l/min Prodpfx Aisyqyrmjrsc - Number of cylinders: 4 - Displacement: 2,482 cm³ - Emission standard according to EU Regulation 2016/1628 Stage IIIa - On-board voltage: 12 V - Type of drive unit: torque converter - Operating pressure for attachments: 200 bar - Oil flow for attachments: 101 L/min - Fuel tank capacity: 90 l - Towing hitch type: DIN 15170 pin - Fully functional, with normal signs of use

Condition: used, machine/vehicle number: 14016, Rotor diameter: 530 mm Rotor width: 1000 mm Prsdpfjyuz Dxsx Airjc Rotor knives: 4 x 2 Stator knives: 2 Feed opening approx. 700 x 1000 mm Drive motor: 90 kW

Condition: new, color: red, driver cabin: other, gearing type: other, Year of construction: 2022, Equipment: crane, Vehicle location: Bovenden, emergency stop, grab control, foldable, 2-point mechanical stabilizers, radio remote control, 3x hydraulic extensions. Predpfx Aiezgxmterec Superstructure: ARCHIVE IMAGE, HMF 340-K3 RC, radio remote control. Compact articulated crane with high lifting capacity, radio remote control, 3 hydraulic extensions, hydraulic outreach 7.15 m, lifting capacity 985 kg at 3.2 m outreach down to 435 kg at 7.15 m outreach. Load chart: 3.2 m - 985 kg, 4.5 m - 695 kg, 5.8 m - 535 kg, 7.1 m - 435 kg! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!