Used Pbr Tm450/2000 for sale (6,912)

Condition: used, Year of construction: 1993, material width 350 mm coil weight 2,0 t coil internal diameter 470 - 530 mm coil external diameter 1500 mm power requirement 1,0 kW weight 1,5 t dimensions (WxDxH) 1,3 x 1,6 x 1,9 m motoric driven, with manual expansion Fpodpfjvuuapox Aa Nog as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1984, turning diameter over cross slide: 1,600 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 35,000 mm, workpiece weight (max.): 63,000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem construction on one bed, with left and right headstocks Faceplate double tailstock left and right Double carriage Steady rest included Roller rest included Operator panel with scales requires attention and replacement Motorized tailstock for each side (left and right) 3-bed way design Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Industries served: - Shipyards - Propeller shaft manufacturing - Hydraulic cylinder shafts - Camshafts - Defence & Aerospace - Rolls and shafts for steel mills - Crankshafts Fedpsynky Asfx Aa Nspg Specifications Metric / Imperial Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: Ø 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Max spindle speed: 180 rpm Feed X-axis: 5,000 mm/min Feed Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Condition: new, Forklifts and pallet trucks Jungheinrich – EFX 413 / AM 2000 X / EMC 110 / TMX 10 / BT SPE 125 Fpedpfx Aasy H Evkj Neg

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Fpsdpfx Aaewugcze Nsg Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: used, Year of construction: 1987, pressure 2000 t distance between columns 975 mm stroke 400 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1015 x 1050 mm table height over floor 800 mm capacity of ejector in table 6,3 t ejector stroke in table 100 mm capacity of ejector in ram 65 t ejector stroke in ram 100 mm ram surface 975 x 1050 mm return capacity 150 t speed down 235 mm/s speed up 250 mm/s working speed 5 - 20 mm/s oil volume 4000 l Fpodpfx Aasyx Impo Neg height over floor 3,65 m height beneath floor 3,75 m power requirement 194,0 kW weight 105,0 t dimensions (WxDxH) 5,0 x 6,5 x 7,4 m Calibrating press with oil-hydraulic drive, hydraulic ejector in table and ram

Condition: used, Year of construction: 2000, Overview This complete hot-fill bottling line for non-carbonated beverages was was put together by the last producer himself and ran smoothly right up until the end. The line is designed for processing, heating, filling, cooling, and packaging of products such as juice and similar beverages. It includes upstream thermal processing, filling, downstream cooling, and end-of-line packaging equipment. The line is still assembled and can be viewed in person at any time.  Technical data Capacity: approx. 3,500 – 6,000 bottles/hour (filling section) Formats: 0.7 L / 1.0 L / 0.5 L / 1.5 L Application: Hot filling of juice and non-carbonated beverages Configuration: Heating / pasteurization system (plate heat exchanger based) Rotary filler with 28 filling valves and 4 capping heads Cooling tunnel with 3 zones Manual depalletizing crane system Rotary bottle rinser Carton erecting and sealing system Utilities: Compressed air, electrical supply Scope of Delivery Depalletizing crane system | DEMAG | Manual layer depalletizing with air-cushion gripping system Bottle rinser | FIMER | Rotary rinser with conveyor system Filling monoblock | MAG Schymanski | BETTA 28/4 | 2000 | 28 filling valves / 4 capping heads, hot fill Cooling system | 3-zone cooling tunnel with spray system Plate heat exchanger | GEA | Integrated cooling circuit Feed tank | Speidel | Atmospheric tank Pasteurization system | API Schmidt-Bretten | Plate heat exchanger based heating system Carton erecting system | BORTOLINKEMO | F.O.C. 23/30 | 1993 | Automatic carton forming unit Carton sealing system | BORTOLIN |  Hot melt carton sealing Glue system | Nordson | Series 3400 | Hot melt unit Conveyor systems | Various transport conveyors Fpsdpfx Aaey Rmfbo Neg

Condition: excellent (used), Year of construction: 2001, pressure: 13 bar, 1 used steam boiler ----- Manufacturer: LOOS, Gunzenhausen Type: U-HD Heating surface approx.: 31 m² Maximum output: 2,000 kg/h Maximum permissible operating pressure: 13.0 bar Increased test pressure: 23.4 bar Water content at NW approx.: 1,740 l Total water content approx.: 2,480 l Year of manufacture: 2001 Fpedpswub Hbjfx Aa Neg Equipped with Weishaupt gas burner, gas control line, control cabinet, feed water pump, water level sight glass, steam and safety valve, and the existing coarse and fine fittings.

Condition: used, Year of construction: 1971, functionality: fully functional, turning diameter over bed: 900mm turning diameter over slide rest: 800 mm Center distance: 2.000 mm turning diameter: 1.200 mm turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 Fodpey N Sw Hjfx Aa Nepg max. width of the adjustable bed: 900 mm spindle bore: 85 mm turning rate: 14 - 710 min-1 dimensions (LxWxH), approx.: 4.705 x 2.060 x 2.000 mm equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements The main spindle box was completely overhauled approx. 10 years ago. The vibration-damping elements are included in the scope of delivery. The machine is from the original owner.

Condition: new, Roller conveyor length 2000 mm Roller conveyor width 350 mm Fodpfx Aajy H N N Ie Nspg

Condition: excellent (used), Year of construction: 2010, total height: 3,300 mm, total length: 5,600 mm, total width: 4,300 mm, table load: 2,000 kg, overall weight: 10,500 kg, Spindle SK 40 Speeds 8000 Rpm with 165 Nm Workload 2000 Kg ATC 56 Positions Hours spindle 10.304 Fpsdpoyh U E Hofx Aa Neg Closed housing with automatic top door IKZ Coolant system LTA Air Cleaning Length:5600mm Width:4300mm Height:3300mm Weight:10500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), total length: 3,500 mm, total width: 2,000 mm, plate height: 350 mm, Manufacturer: ASQUITH Type: ST-35 Specifications Metric US Standard Length 3500 mm Fjdpfx Aaowp D S Nj Nepg Width 2000 mm Height 350 mm Number of T-slots 8 T-slot pitch / spacing 285 mm T-slot size 36 mm Number of matching pieces 1 Dimensions (estimated) Length 3500 mm Width 2000 mm Height 250 mm Weight 5250 kg Please note: The information on this page has been compiled by us to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent any representations or contractual conditions. We recommend you verify all important details.

Condition: good (used), total length: 5,000 mm, total width: 2,000 mm, plate height: 300 mm, Manufacturer: STOLLE Type: SDT Year of manufacture: 2000 Specifications Metric US Standard Length 5000 mm Width 2000 mm Height 300 mm Number of T-slots 5 Distance between T-slots / pitch 400 mm T-slot size 36 mm Number of matching pieces 1 Dimensions (Estimated) Length 5000 mm Width Fpjdpewp Emzofx Aa Nsg 2000 mm Height 300 mm Weight 8000 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent representations or contractual terms. We recommend that you verify all important details.

Condition: good (used), Year of construction: 1998, CNC Vertical lathe DS Dorries Scharmann - VCE 2000 FMC MACH-ID 9088 Make: DS Dorries Scharmann Type: VCE 2000 FMC Control: SIEMENS 840C Year: 1998 Fedpfx Aaowb Ayis Nspg

Condition: good (used), Manufacturer: STOLLE Year of manufacture: 1995 Specifications Metric US Standard Length 2520 mm Width 2000 mm Height 230 mm Number of T-slots 8 Distance between T-slots / pitch 252 mm T-slot size 22 mm Weight per plate approx. 2.7 tons Number of matching pieces 1 Dimensions (estimated) Length 2520 mm Width 2000 mm Height 230 mm Weight 2700 kg Please note: The information on this page has been obtained by us to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but the accuracy cannot be guaranteed. Accordingly, they do not represent any warranty or contractual conditions. We recommend verifying all important details. Fpodpfx Ajwpuxyoa Nsg

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 1,00,000 mm, total length: 2,12,000 mm, overall weight: 1,00,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Fsdpjrx Rxtofx Aa Nepg Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: good (used), total length: 4,000 mm, total width: 2,000 mm, plate height: 295 mm, Manufacturer: STOLLE Type: DTS Fpjdpfx Aaowp E Ncs Njg Year of manufacture: 1990 Specifications Metric US Standard Length 4000 mm Width 2000 mm Height 295 mm Number of T-slots 4 T-slot spacing / interval 400 mm T-slot size 42 mm Weight per plate approx. 6000 kg Dimensions (Estimated) Length 4000 mm Width 2000 mm Height 295 mm Weight 6200 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, you will not represent or constitute contractual terms. We recommend you verify all important details.

Condition: good (used), Year of construction: 2013, Manufacturer: Pro King Type: LC 450 Control system: Fanuc Oi-TF Year of construction: 2013 Specifications: Metric Metric US Standard Max. turning diameter 1135 mm X-axis 560 mm Z-axis 2000 mm Spindle bore 153 mm spindle speed 700 rpm Spindle power 37 kW Tool changer 12 Chip conveyor Yes Quill holder 6 Mk Quill Ø 235 mm Fpsdetwlm Nspfx Aa Neg Dimensions (estimate) length 6500 mm width 3200 mm height 2900 mm weight 15000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 2007, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, Manufacturer: Lagun Goratu Type: GBM CM5 Control system: HeidenHain iTNC530 Year of construction: 2007 Specifications: Metric Fpedpfjvd Ddcex Aa Neg Metric US Standard X-axis 5000 mm Y-axis 1200 mm Z-axis 2000 mm Table length 6500 mm table width 1100 mm Table load 6000 Spindle power 37 kW Spindle speed 4000 rpm Tool holder 50 ISO/Bt/Mk Feed X - axis 20000 mm/min. Feed Y - axis 20000 mm/min. Feed Z-axis 20000 mm/min. Milling head auto index 2.5 x 2.5 ° Working hours 18000 H Dimensions (estimate) length 8400 mm width 6800 mm height 4800 mm weight 34000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power Fsdpfx Aaev A Uw Dj Nspg 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: good (used), total length: 5,000 mm, total width: 2,000 mm, plate height: 300 mm, Manufacturer: STOLLE Type: DTG Year of manufacture: 1998 Specifications Metric US Standard Length 5000 mm Width 2000 mm Fpedpfx Aewp Emhea Njg Height 300 mm Number of T-slots 8 Distance between T-slots / pitch 250 mm T-slot size 30 mm Dimensions (Estimated) Length 5000 mm Width 2000 mm Height 300 mm Weight 8000 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent representations or contractual terms. We recommend that you verify all important details.

Condition: good (used), Year of construction: 2000, total length: 3,000 mm, total width: 2,000 mm, plate height: 350 mm, Manufacturer: STOLLE Type: CAST IRON Fsdpowp Hwhefx Aa Njpg Year of manufacture: 2000 Specifications Metric US Standard Length 3000 mm Width 2000 mm Height 350 mm Number of T-slots 6 T-slot spacing / step 330 mm T-slot size 54 mm Weight per plate approx. 5700 kg Number of matching pieces 3 Dimensions (estimated) Length 3000 mm Width 2000 mm Height 350 mm Weight 4800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but the accuracy cannot be guaranteed. Accordingly, they do not constitute representations or terms of contract. We recommend checking all important details.

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Fpodpjyn Em Rjfx Aa Neg Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), total length: 4,010 mm, total width: 2,100 mm, plate height: 200 mm, Manufacturer: STOLLE Type: RDG Year of manufacture: 1980 Specifications Metric US Standard Length 4010 mm Width 2000 mm Height 220 mm Number of T-slots 13 T-slot distance / pitch 400 mm T-slot size 35 mm Weight per plate approx. 5.3 tons Dimensions (estimated) Length 4010 mm Width 2100 mm Fpjdewp Dhdopfx Aa Njg Height 220 mm Weight 5300 kg Please note: The information on this page was provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contract conditions. We recommend that you check all important details.

Condition: good (used), total length: 5,000 mm, total width: 2,000 mm, plate height: 350 mm, Manufacturer: ASQUITH Type: DRG Year of manufacture: 1980 Specifications Metric US Standard Length 5000 mm Width 2000 mm Height 350 mm Number of T-slots 8 Distance between T-slots / step 240 mm T-slot size Fodpfswp Eqyex Aa Nspg 35 mm Number of matching pieces 1 Dimensions (estimated) Length 5000 mm Width 2000 mm Height 350 mm Weight 7500 kg Please note: The information on this page was provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms arise from it. We recommend verifying all important details.

Condition: good (used), total length: 6,000 mm, total width: 2,000 mm, plate height: 510 mm, Manufacturer: STOLLE Type: Cast iron Year of manufacture: 1990 Specifications Metric US Standard Length 6000 mm Width 2000 mm Height 510 mm Number of T-slots 8 T-slot spacing / pitch 250 mm T-slot size 36 mm Weight per plate approx. 9500 kg Dimensions (estimated) Length 6000 mm Width 2000 mm Height 510 mm Fpedpfswp Hxfjx Aa Njg Weight 14500 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend you verify all critical details. Share on