Used Pipe Taps for sale (3,612)

Condition: good (used), functionality: fully functional, 1 x Drilling and threading machine WMW Heckert Mikromat Well-maintained machine with complete accessories + coolant pump Technical data: Spindle speeds: 90 - 710 rpm (7 steps) Thread sizes: M6 - M30 Pitches: 1.0 - 3.5 mm The machine can be inspected while powered on. Gujdpfozzz E Iex Akajg

Condition: excellent (used), Equipment: type plate available, 18 x sparkling wine pressure tank/storage tank made of V2A, 8 bar, with lateral agitator mixer - second-hand - used Manufacturer: Rieger Gsdpjtvg Uyofx Akaoug Volume approx. 52,100 liters Diameter approx. 3,250 mm cyl. height approx. 5,500 mm Total height approx. 8,000 mm Cylinder wall thickness: 11 mm Operating pressure: 8 bar Working temperature: 20 C° Internal surface: 2B=IIIC ground Surface outside: marbled Top shelf: dished bottom 3 crane eyes CIP line DN 50 drawn downwards with flange connection with pressure line DN 25 5 saddle feet Tank cylinder: Manhole oval 350 x 450 mm 1/2" sample tap with flange connection Clear drain DN 65 with angle seat valve Lateral agitator mixer, type: propeller at 315° from the manhole Complete champagne pressure fitting with safety valve, pressure gauge, vacuum valve and DN 25 angle seat valve Underbody: dished bottom Residual drain pipe pulled forward in the middle, flush with the tank DN 65 with angle seat valve 6 sturdy with height-adjustable spherical feet and sturdy washers 9 basic tanks and 9 saddle tanks are available otherwise as per photos

Condition: used, vertical stainless steel tank with side-entry agitator, cleaning line, central bottom outlet, side outlet, sampling tap, and level gauge Additional title: vertical stainless steel tank Volume appr.: 3100 l Godpfxjzgcv Ss Akasug Length: 1600 mm Width: 1600 mm Material: stainless steel Base construction: standing on 4 feet Features: cleaning pipe, agitator with motor (Turbo-Müller, 3 kW), central outlet, sampling tap, hose level indicator, side outlet, ladder bracket

Condition: new, Year of construction: 2026, color: red, overall weight: 14,630 kg, maximum load weight: 12,500 kg, empty load weight: 2,130 kg, gearing type: other, driver cabin: other, Vehicle location: en route / in transit, steel body, rear discharge Body: Water tank roll-off container, approx. 10,000 liters. ARCHIVE IMAGES Water tank with platform, approx. 10,000 liters - according to DIN 30722-1 - Internal dimensions L x W x H: 5400x2394x approx. 1000 mm (tank 4600mm, platform 800mm) - Overall dimensions L x W x H: 5,683mm x 2,394mm x 1,616mm - Material grade: S235 (St-37) - Floor plate / wall plates: Floor plate thickness 5mm, sides 3mm, roof and rear wall 4mm - at the rear, a platform made of non-slip sheet metal 5 mm - Frame made of INP180 - On the roof, a manhole: diameter 600 mm - Inside, 3 baffle plates, diameter 600 mm (large cavities) - On the front wall, a galvanized and screwed-on ladder - At the bottom of the rear wall, an A-connection with a tap Gedpszr Rlxefx Akaoug - At the top rear, a B-connection with a flap for filling - On the front wall, a C-connection with a ball valve at the bottom left and right, pipe for venting - 2 greased steel rollers, L=300mm - 2 vertical pipes, galvanized and screwed-on (1x front and 1x rear) - 2 level indicators made of hose (1x front and 1x rear) Tanks welded, degreased, blasted, internally primed with epoxy Temabond ST 200, 300 µm, externally primed with epoxy resin paint, 60 µm and painted with 2K paint (polyurethane paint B7), 40 µm in RAL color 3000 Red with UVV sticker (DGUV), checklist (safety instructions) and warning marking - watertight (will be tested for watertightness) Available presumably from the end of September/beginning of October 2026. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: good (used), Year of construction: 1990, Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Speed: rpm Godjficzkepfx Akasug -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 220 V -Mechanics for: cutting jaws missing -Dimensions: 1100/700/H1130 mm -Weight: 132 kg

Condition: used, water tank capacity: 60,200 l, Upright stainless steel container made of V2A, wine tank/fruit juice tank - used - Manufacturer: Bolz Volume approx. 60,200 liters Diameter approx. 3,500 mm cyl. Height approx. 5,330 mm Total height approx. 7,700 mm Weight approx. 3,500 kg Outer surface: marbled Gedpfxswlg Aps Akaeug Inner surface: 2B=IIIC ground Top end: Torispherical head 2 crane eyes Threaded weld-on socket DN 100 to DN 40 Sprinkling ring Vent socket DN 50 (fermentation lock) Tank cylinder: Level indicator with bar, scale, and standpipe valve DN 15 Manhole 350x450 mm Test tap DN 15 Ladder hook at the top Immersion stem sleeve DN 15 for temperature display Downwardly extending CIP line with vent line DN 40, with connecting thread DN 50 according to DIN 11851 Clear drain with angled seat valve DN 50 Cooling line CIP ball Underbody: Torispherical head Forward curved bead with angled seat valve DN 50 - Outlet pipe DN 100 reduced to DN 50 with flange 5 trumpet feet with domes, height-adjustable with washers Available quantity: 30 pcs. Otherwise, see photos

Condition: used, Year of construction: 2003, operating hours: 34,900 h, functionality: fully functional, machine/vehicle number: 112253, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 410 mm, controller model: Brother CNC-A00, total length: 2,250 mm, overall weight: 2,250 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 26, BROTHER TC-22A – 5 AXIS - Manufacturer: Brother - Model: TC-22A - Serial Number: 112258 - Year: 2003 - Machine Type: CNC Vertical Machining / Tapping Center - CNC Control: Brother CNC-A00 - Number of Axes: 5 - X-Axis Travel: 500 mm - Y-Axis Travel: 400 mm - Z-Axis Travel: 410 mm - Table Size: 650 × 400 mm - Maximum Table Load: 200 kg - Distance Table to Spindle Nose: 200–610 mm - Spindle Taper: HSK-A40 - Spindle: 1 - Spindle Speed: up to 12,000 rpm standard - Tool Magazine: 26 tools - Maximum Tool Diameter: 55 mm - Maximum Tool Diameter with Adjacent Pockets Empty: 125 mm - Maximum Tool Length: 200 mm - Tool Change Time: approx. 0.7 sec - Rapid Traverse X/Y/Z: 56,000 mm/min - Spindle Motor: approx. 7.7 kW / 10 min rating - Power Supply: AC 200 V, 50/60 Hz - Maximum Power Requirement: 25 kVA - Rotary / Swivel Table: Installed - 5-Axis Configuration: 3 linear axes + 2 rotary/swivel axes - Coolant Treatment System: Included Guodoz Akqvspfx Akaog - Coolant / Lubricant Pump: Included - Machine Dimensions / Required Floor Space: approx. 1,671 × 2,846 mm - Machine Height: approx. 2,274 mm - Machine Weight: approx. 2,250 kg

Year of construction: 2013, condition: used, Complete production and filling plant for a pub brewery, consisting of the following components: 1. Milling plant Milling mill with malt feed hopper and pipe chain conveyor system for malt grist. 2. Brewhouse 2-unit brewhouse (Kaspar Schulz, built in 2013) as a brewing block with copper-clad stainless steel vessels. The wort is cooled by a separate plate heat exchanger (API Heat Transfer, built in 2013) with downstream wort aeration. There is also a hot water tank (Kaspar Schulz, 2013) with insulation and heating jacket. 3. Fermentation and storage cellar 4 cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 12 hl each and a maximum overpressure of 3 bar. 3 cylindroconical fermentation and storage tanks (Kaspar Schulz, 2013) with a gross volume of 25 hl each and a maximum overpressure of 3 bar. The temperature of these 7 cylindroconical fermentation and storage tanks is controlled by a common control cabinet. In addition, there are 2 further cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 14.7 hl each and a maximum pressure of 3 bar. The temperature of these two cylindroconical fermentation and storage tanks is controlled by another control cabinet. 4. Pressure tank cellar / serving cellar 5 upright pressure tanks (Kaspar Schulz, 2013) with clamp heads, each with a gross capacity of 10.5 hl and a maximum pressure of 3 bar. 5. Filling room Siphon filler/glass bottle filler (JS Maschinen) with 6 filling heads. Keg interior and exterior washer (Scheuer) with spray nozzles in stainless steel housing and lye tank in the base. Keg filling station with taps for direct filling of kegs from the pressure tanks. 6. Operating/supply technology Refrigeration system (Hafner-Muschler, 2013) as an ice water storage system with R404a refrigerant and 3 refrigeration compressors. Oil-free compressed air piston compressor (Kaeser, 2013) with a maximum operating pressure of 10 bar and compressed air refrigeration dryer (Kaeser, 2013). Air separator (AST) as nitrogen generator with adjacent nitrogen pressure tank. Additional title: complete brewing plant with copper-clad brewhouse Guodpfoy Nm I Hsx Akajg Cast wort capacity: 10 hl Features: grain mill, malt transport system, 2-unit brewhouse made of stainless steel (copper clad), wort cooling, hot water tank, 9 fermentation tanks (4 x 12 hl, 3 x 25 hl, 2 x 14.7 hl), pressure tanks (5 x 10.5 hl), siphon filler, keg washing system, keg filling station, compressed air system, refrigeration system, N2 generator,

Condition: used, Year of construction: 2002, Cylindroconical stainless steel tank with glycol cooling for frame and cone, ventilation nozzle at the outlet and various fittings. Wall thicknesses: - Cone 3 mm - Frame 2 mm - Clamp bottom 3 mm Cone angle: 120° Roughness of cone interior < 0.35 µm Additional title: Vertical, cylindrical-conical, coolable stainless steel tank Volume: 4681 liter Working pressure tank: 0,99 bar Working presure double jacket: 0,9 bar Guedpfoztza Ajx Akaeg Width: 2.3 m Height: 2.5 m Material: V2A stainless steel 1.4301 (AISI 304) Base construction: cylindroconical, opper bottom dished shell, on 3 cabinet legs one is 50mm shorter for a load cell Features: 3 cooling zones with volumes of 7 and 14 and 34 liters, coolant = glycol solution, connection size inlet (one each) DN 20, connection size outlet (one each) DN 25, sight glas DN100 mit halogen lamp,CIP head, air duct with sterile filter, standpipe, outlet pipe DN 65 with disc valve, manhole with lid, sampling tap, temperature sensor, load cell, Safety fitting consisting of over pressure pipe with valve, manometer and flap valve DN32

Condition: used, Year of construction: 2016, Water treatment plant with semi-permeable membrane modules for desalinating pre-treated water. Reverse osmosis takes place via a two-stage process consisting of two pressure pipes, each with two membrane modules. The plant consists of: - Two pressure pipes, each with two membrane modules - Permeate blending and concentrate recirculation - Upstream fine filtration - Various sampling taps - Various measuring instruments for pressure, flow, temperature, conductivity and pH value - Flushing station with flushing tank and flushing pump - Chemical dosing stations for antiscalant and NaOH - High-pressure pump - Various automatic fittings - Control cabinet with touch display Additional title: Reverse osmosis for desalination of raw water Flow rate: 6000 l/h depending on the blending quantity Max. operating overpressure: 14 bar Recovery appr.: 82 % Gusdpfxjyxnffs Akaeg Water: 5-7 m3/h; 1-10 bar Operation / Control: Switch cabinet with touch display Features: 2 pressure pipes, each with 2 membrane modules; sampling taps; fine filters; flushing stations; chemical dosing stations; high-pressure pump; automatic fittings; measurements of pressure, flow, conductivity, temperature and pH value;

Condition: good (used), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion test chamber for salt spray tests Specifications: Test chamber volume: approx. 1000 L Test chamber dimensions (W x D x H1/H2): 1400x800x800/1020 mm Door opening dimensions (W x H): 1300x680 mm Housing external dimensions (W x D x H): 2162 x 995 x 2080 mm Operating temperature range: 5°C > ambient temperature to +80°C Heavy-duty design for a load capacity of up to 350 kg Gujdszg Tl Repfx Akasg Process control: Beckhoff PLC, color touch screen display, 50 memory locations for test procedures, 50 memory locations for test segments, ramps: Humidity and temperature control over the entire working area, Ethernet connection Electrical connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar, tap connection 3/4" external thread for connecting an ion exchange cartridge Compressed air: 7-8 bar Wastewater: siphon / 30 mm ID hose nozzle Exhaust: pipe end AD 75 mm Operating modes: Salt spray Condensation water (CWC) Ventilation with ambient air Warm air Controlled humidity

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, table length: 6,400 mm, table width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Basic tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 AsperWin – Basic module: 1 Godowhk E Hspfx Akasug AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 1 m rails for support rollers with 2 rails 7 Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1

Condition: used, Year of construction: 1991, 2 vertical stainless steel tanks with dished bottoms, shell cooling zone, manhole, sampling tap, insulation and central outlet. Additional title: 2 insulated, coolable tanks Guodeztya Ujpfx Akasg Volume: 44361 l Operating pressure: 0,9 bar Operating temperature: 20 °C Material: stainless steel Position: vertical Base construction: cylindrical tank with dished bottoms, placed an 4 square tube feet Features: insulated, covered, 1 cooling zone (183 l, 0.9 bar), manhole, safety valve, CIP pipe with spray head, manometer, yeast plug Periphery: own temperature control

Condition: used, CIP system with 5 tanks (one of which is insulated). Additional components: - Each tank is fitted with sampling taps, a ladder frame, a manhole on the top, pneumatic valves and level probes - Shell-and-tube heat exchanger for heating water, which is then fed into the CIP tanks - 3 x dosing pumps (Grundfos) - CIP feed pump (Hilge) - In-line measurement of temperature and conductivity - Pipe panels as well as various pipes, valves and fittings Additional title: Cleaning system with 5 vessels Material: vessels from stainless steel Position: vessels standing on 3 feet each Gujdpfxjy Tizwe Akasg Base construction: flatconical vessels Features: 5 CIP tanks (1 of which is insulated); feed pump; 3 chemical dosing pumps; tube bundle heat exchanger; level probes; temperature measurement; conductivity measurement; pneumatic butterfly valves; pipe panels various other valves, pipework and fittings

Condition: excellent (used), Piping material made of PE, Tyco/Victaulic, Sanpress, Prestabo, Sanpress Inox, Georg Fischer composite pipes, Belimo actuators, mostly unused; more images and lists available upon request. Many items are packaged and ready for shipping. Guodpfx Aezzyu Ijkajg

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Gusdpfx Akoz Ai Tpeasg Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Guedpfx Asl Hx Adskasg

Condition: used, mileage: 60,048 km, power: 294 kW (399.73 HP), first registration: 05/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2026, color: orange, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Equipment: ABS, * Special equipment: * Wiedemann & Reichhardt BASIC 1000 Type 11.5-360 Vario superstructure, suction and jetting vehicle, former municipal service vehicle. * 3.0 m³ water / 8.0 m³ sludge, piston in front position * Vessel tube, lid, and base made of stainless steel * Stainless steel baffle plate mounted on sludge tank Guodpfx Akexvfxhoaog * Combination unit with telescopic piston, suction hose reel, high-pressure hose reel mounted on a boom with electronic pressure and speed control and display readout * ARCON radio remote control * High-pressure pump: Uraca Type P3-45-60 (Plunger 60 mm, 346 l/min, 205 bar drive power 130 kW, drive speed 1500 rpm), 3,421 operating hours * Vacuum pump: Wiedemann KW 2000 (2000 m³/h) with 4,395 operating hours (liquid ring pump) * Liquid ring pump - power consumption 50 kW, speed 1300 rpm * Liquid ring pump coupled with a pre-charge pump for temperature-dependent water circulation * Suction and high-pressure boom (swivel reel with 2 high-pressure hose reels, which can be operated individually, simultaneously, or synchronously) * Centrally mounted boom for optimal working range on both sides * - hydraulically swivels approx. 180° * - hydraulically telescopes approx. 1,200 mm * Hydraulic cable winch mounted on boom, lifting capacity 250 kg * Suction hose 25 m DN 125 * High-pressure hose reel 200 m DN 25 * Small high-pressure hose reel 80 m DN 13 * Length counter for high-pressure hose * Manhole above tank DN 500 * Hydraulic tilting tank approx. 1 m for maintenance and repair work * Hydraulic oil tank with 80 L capacity * 5 sight glasses on tank lid * Water filling on both sides with level indicator * BEKA-MAX centralized lubrication system for superstructure only, pump type troni X1, runtime 1.5 min or 20 cycles, pause time 4h * Accessories (various nozzles, suction hose DN 125, hose guides, spare parts (cardan shaft, valves, hoses)) * Handwash basin in the right front equipment cabinet, 20 L capacity, with swivel tap and fill unit * Boxes right and left at the rear, approx. 50 L, for storage of return pulleys, nozzles, etc. * Work floodlight (spotlight for shaft illumination), mounted on the boom, with 15 m cable and cable reel * Various work spotlights mounted on both sides of the superstructure * Rotating beacon on the boom and driver’s cab * Holder for manhole hooks at the rear incl. 2 hooks * 2 spring-tension cable reels * Large equipment cabinets mounted to the right and left of the water tank (illuminated), approx. 50 cm deep, aluminum doors opening upwards, gas struts with top locking * Wardrobe positioned over the high-pressure pump with lighting, ventilation slots, and water drain at the bottom * Extendable vice with bracket to the right * Rockinger SK 5 towing coupling * Front axle load 9.5 t * Raised exhaust pipe on right * Exterior mirrors electrically adjustable and heated * Wide-angle mirror with electric maneuvering assistance * Kerb mirror on the right, adjustable and heated * Rear axle differential lock * Air horns on driver's cab roof (2) * Cab: with 2 rear wall windows, tinted * Cab: with air suspension * Flame start system * Toggle brake (EVBec controlled) * Middle seat * PTO NMV 221, i=0.98 n=1470 rpm * Cab socket 12V and 24V * Control module for external data exchange * Additional high/low beam and fog lamps with cornering light * Further equipment: * Reversing camera * Turning camera * Axle configuration: 6x2/4 * Steered trailing axle * Wheelbase 3,600 mm + 1,350 mm * Frame over...

Condition: used, Year of construction: 2021, functionality: fully functional, Extraction ducting, purchased on March 24, 2021, for the wood workshop extraction system. Piping/ducting system for connecting multiple woodworking machines to a central or decentralized extraction system. Total length of ducting (approximate dimensions): 300 mm pipe diameter → approx. 20 m 250 mm pipe diameter → 1.5 m + approx. 7 m hose 200 mm pipe diameter → approx. 2 m 160 mm pipe diameter → approx. 18 m 140 mm pipe diameter → approx. 1.5 m 120 mm pipe diameter → approx. 5 m 100 mm pipe diameter → approx. 6 m Extraction flaps: 300 mm → 1x 250 mm → 1x 160 mm → 4x 140 mm → 1x 120 mm → 2x 100 mm → 2x Key technical data: - Machine type: Extraction ducting / piping system for chip and dust extraction - Application area: Connection of woodworking machines, extraction points, and extraction system Guodpfxozuyz Ie Akaeg - Function: Collection and removal of wood chips and dust from the workshop - System components: Pipes, elbows, branches, dampers, brackets, and connecting pieces - Material / design: Workshop ducting for stationary extraction technology - Use: Connection of multiple machines such as saws, planers, milling machines, and sanding machines - Advantage: supports a clean, safe, and efficient workshop operation - Particularly interesting in combination with an extraction system or for workshops under construction/renovation - Relevant accessory package for multiple stationary machines - Useful addition for woodworking shops, carpentry shops, training workshops, and makerspaces No warranty

Condition: used, Year of construction: 1986, Fermentation cellar with 4 coolable stainless steel tanks. Tank 1-3: C. Gresser, 1986, gross volume 204.60 hl. Tanks standing on 4 legs, each with 2 frame cooling zones, dished bottoms and central outlet. Equipment in each case: safety valve, cleaning line, CIP spray head, sampling tap, manhole in the frame and sight glass in the tank dome. Tank 4: C. Gresser, 1986, gross volume 115.69 hl. Tank standing on 4 legs with frame cooling, dished bottom and outlet pipe. Equipment: Cleaning line, CIP spray head, sampling tap, manhole in the frame. Additional title: coolable stainless steel tanks 3 tanks each: 205 hl 1 tank each: 116 hl Material: stainless steel Gjdpfx Akovcq Dteaoug Position: vertical on 4 feet Features: Cooling jackets, cleaning lines, CIP spray heads, discharge lines, safety valves, sampling taps, manholes, sight glasses

Condition: used, water tank capacity: 30,250 l, Upright stainless steel container made of V2A, wine/fruit juice tank with 3 cooling plates, partly with digital temperature measurement - used - Volume approx. 30,250 liters Diameter approx. 2,500 mm Cylindrical Height approx. 5,600 mm Total height approx. 7,200 mm Outer surface: marbled Inner surface: 2B=IIIC ground Top end: Torispherical head 2 crane eyes Threaded weld-on socket DN 100 centrally connected to DN 40 with threaded socket DN 50 with fermentation lock valve DN 50 with check valve DN 50 Sprinkling ring Tank cylinder: Level indicator with bar and scale and standpipe valve DN 15 Manhole 420x320 mm Test tap DN 15 Ladder hook at top Immersion stem sleeve for temperature display Downwardly drawn CIP line with vent line DN 40 with connecting thread DN 50 Clear drain with angled seat valve DN 50 Godpfxewlg E Re Akasug Cooling line CIP ball Bottom end: Torispherical head to Front-drawn floor sill with DN 50 angled seat valve and DN 50 outlet pipe with flange 4 spherical feet, height-adjustable, with washers Available quantity: 24 Otherwise, see photos

Condition: used, water tank capacity: 20,350 l, Rieger V2A stainless steel vertical wine/fruit juice tank - used - Volume approx. 20,350 liters Diameter approx. 2,000 mm cyl. Height approx. 6,000 mm Godpfxowlg Hns Akajug Total height approx. 7,400 mm Outer surface: marbled Inner surface: 2B=IIIC ground Top end: Torispherical head 2 crane eyes Central threaded weld-on socket DN 100 to DN 40 with threaded socket DN 50 with fermentation lock valve DN 50 and check valve DN 50 Sprinkling ring Tank cylinder: Level indicator with bar, scale, and standpipe valve DN 15 Manhole 420x320 mm Test tap DN 15 1 ladder hook at the top Immersion stem sleeve for temperature display Downwardly extending CIP line with vent line DN 40 with connecting thread DN 50 Clear drain with angled seat valve DN 50 Cooling line CIP ball Bottom end: Torispherical head to Front-drawn bottom rim with DN 50 angle seat valve, flush with the tank wall Front-drawn outlet with butterfly valve/ball valve/angle seat valve, DN 50 outlet pipe with flange 4 height-adjustable spherical feet with washers Otherwise, as per photos

Year of construction: 2017, condition: excellent (used), Tube cutting system with optical laser mark detection The FZH Vario Flex is a fully automated tube cutting system. It is specifically designed for the precise, reliable cutting of stainless steel tubes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser mark detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via optical detection of a laser mark applied to the tube. Thanks to an integrated rotating 3-jaw cutting head and a micro-spray unit (minimum quantity lubrication), the machining process is extremely gentle on the tools. The tubes remain almost completely dry and free of heavy soiling. The entire process—from loading and clamping to cutting and unloading—is highly automated and follows a material-friendly cycle. Fully integrated labeling and traceability system: The system is designed to meet modern quality standards (Industry 4.0 / automotive). Following the cutting process, a barcode label is automatically generated, assigned, and printed to ensure seamless part traceability (tracking and system logging are directly integrated). Equipped with two separate bin discharge stations (rear-facing hatches with sliding doors), the system automatically switches to the second station when a bin is full. Finished KLT bins can be removed while the machine continues to operate, without interrupting the production cycle. Technical Data & Capacities Maximum tube length (feed): 1,000 mm Guedpfx Akszw Ukcjaeg Material specification: Optimized for stainless steel tubes (including those with pre-assembled union nuts or flared ends) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Continuously adjustable for different tube lengths via a manual handwheel Cutting method: Chip-removing sawing / rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant/lubrication system: Integrated micro-spray unit (MMS) for minimum quantity lubrication Control system: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup mode: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panels Logistics / Output Integrated bin deposit station 2 separate bin output stations for rear-side removal via protected interlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario Flex Special features: Tubes with union nuts Diameter: Ø 6–76 mm Output length: L = 150–1,000 mm Cutting based on laser marking Wall thickness: 1 to 1.3 mm Condition: The system is in good visual and mechanical condition in excellent, clean condition. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2015, operating hours: 26,407 h, functionality: fully functional, BLM Group ADIGE-SYS EM 80 – Fully automatic circular saw for tubes and profiles, year 2015. We offer for sale a fully automatic circular saw, the BLM Group ADIGE-SYS EM 80, designed for precise and highly productive cutting of tubes and profiles in serial production. The machine is equipped with a Siemens SINUMERIK CNC control system and an automatic material feeding system, which enables efficient and repeatable production of larger series. Technical data: Manufacturer: BLM Group / ADIGE-SYS Model: EM 80 Year of manufacture: 05/2015 Control system: Siemens SINUMERIK Operating hours: approx. 26,400 h Tube cutting range: Ø 10–80 mm Gujdezyny Njpfx Akaeg Max. length of finished part: 600 mm Total installed power: 38 kW Power supply: 380 V / 50 Hz / 3 phases Machine weight: approx. 8,500 kg Equipment: automatic material feeding system fully automatic working cycle multiple tool/working positions complete enclosure of the working area extensive set of interchangeable clamping jaws for various diameters – see photos supply and feeding section of the line Siemens SINUMERIK CNC control The machine is particularly suitable for serial production of shorter parts made of tubes and profiles, where high productivity, repeatability, and cutting accuracy are required. Condition and history: The machine was purchased by the current owner approximately 2 years ago for a planned production project, which was ultimately not carried out. Therefore, it has not been used in production since then. The machine has undergone a refurbishment of the hydraulic brake seals on the bed. Technical documentation in German is available, including complete electrical documentation. The offer also includes accessories and a set of clamping jaws shown in the photos.

Condition: used, Year of construction: 2002, functionality: fully functional, Tapping Machine HAGEN & GOEBEL type HG-6 Year of construction: 2002 Guodpfx Akozxfbneajg Spindle travel: 50 mm External spindle cone: B12 Rotation: from 355 to 1800 RPM Rotation right / left Throat depth: 120 mm BILZ Quick Attach Voltage: 380 V Width: 400 mm Depth: 600 mm Total height: 800 mm Weight: approx 100 kg