Used Pipelines for sale (102)

Condition: used, mileage: 300 km, power: 231 kW (314.07 HP), first registration: 04/2026, fuel type: diesel, overall weight: 30,000 kg, gearing type: automatic, Year of construction: 2026, Equipment: air conditioning, all wheel drive, crane, TECHNICAL CONSTRUCTION DESCRIPTION KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production year. Inspection/Initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in difficult terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER loading crane PK 23002 SH E Power Link Plus ? Suitable for assembly, lifting, and transport work in rough terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive Kdodpezdl Sdefx Adlst ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Ability to turn on the spot TERRAIN CAPABILITIES ? Gradient climb: up to 60% ? Side slope: up to 40% ? Wading depth: up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive areas ? Ideal for work off paved roads CAB ? Safety cab in ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control terminal ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE SYSTEM Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Continuous slewing system ? Hydraulic six-section boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning through sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection ? HPSC stability monitoring ? Active vibration damping ? Hydraulic winch ? Four-point outrigger ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Special forestry work ? Work in moorlands and nature reserves ? Disaster relief and rescue operations ? Assembly and lifting work in hard-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe working even under the most difficult conditions ? Economical alternative to mobile cranes in rough terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the PALFINGER PK 23002 SH E Power Link Plus mounted on it combines maximum off-road performance with powerful crane technology. Due to the extremely low ground pressure, the high payload, and the reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machinery.

Condition: excellent (used), mileage: 47,117 km, power: 390 kW (530.25 HP), first registration: 04/2024, fuel type: diesel, axle configuration: 6x2, fuel: diesel, fuel tank capacity: 500 l, brakes: retarder, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6, total length: 9,850 mm, total width: 2,550 mm, total height: 3,900 mm, loading space volume: 8 m³, Year of construction: 2024, Equipment: AdBlue, Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, power assisted steering, power mirror, retarder, trailer coupling, - Aluminum fuel tank - Rear work light - Front work light - Brake booster - Differential lock - High beam - Windshield - Low noise - Speed limiter - Intarder - Air conditioning - Air suspension - Air-suspended seats - Air horn - Media system - Rotating beacon - Reversing camera - Sun visor - Toolbox - Power take-off (PTO) Kdodpezxz A Iefx Adlst - Central lubrication system - Tow hitch Technical Information Number of cylinders: 8 Engine displacement: 16,353 cc Front axle: Steerable Rear axle 1: Lift axle; Steerable Weights Unladen weight: 22,845 kg Payload: 4,155 kg GVW: 27,000 kg Functional Body manufacturer: MTS DINO 8 M3 SUCTION EXCAVATOR Condition Technical condition: very good Optical condition: very good SCANIA R 530 XT B6X2*4NA + MTS DINO 8 M³ SUCTION EXCAVATOR First registration: 04/22/2024 Mileage: only 47,117 km Body: MTS DINO 8 m³ with MEGA ARM Turbine hours: 1,168 hours Compressor hours: 1,155 hours Previous owner: from first hand Condition: Very well maintained, fully equipped, and ready for immediate use – READY FOR WORK! We offer this very young and exceptionally well-equipped Scania R 530 XT B6X2*4NA with a professional MTS DINO 8 m³ suction excavator body. The powerful Scania XT chassis, combined with the professional MTS suction technology, makes this vehicle an ideal machine for civil engineering, cable and pipeline construction, road construction, industrial work, and numerous other demanding applications. The suction excavator features, among other things, an MTS MEGA ARM with a hydraulic swivel head, an 8 m³ tipping hopper with a complete stainless steel interior lining, a high-pressure water unit, a ReciDrive self-propelled function, 2 remote controls, and 2 powerful turbine fans. SCANIA R 530 XT B6X2*4NA * Scania R 530 XT * B6X2*4NA version * 6x2 chassis * Powerful Scania 530 hp engine * XT Heavy-Duty version * First registration 04/22/2024 * Mileage only 47,117 km * Air-suspended * Last axle liftable * Last axle steerable * CR17N XT cab * Automatic transmission * Intarder / Retarder * 1 folding bed in the cab * Navigation system * Multimedia system * Lamp bar on the cab roof * Additional spotlights * Trailer coupling * Central lubrication system MTS DINO 8 M³ SUCTION EXCAVATOR BODY Professional and very comprehensively equipped MTS DINO 8 m³ suction excavator body. The MTS DINO is designed for the powerful suction of a wide variety of materials and is ideally suited for work in areas where conventional excavation is difficult or associated with an increased risk of damage. MTS MEGA ARM Equipped with the large MTS MEGA ARM for flexible and precise positioning of the suction hose. Equipment includes, among other things: * Hydraulically operated MEGA ARM * Hydraulic swivel head * Large working area * Precise positioning of the suction hose * Operation via remote control This allows the suction hose to be positioned very precisely at the desired work location...

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Type: LEP 2.3 – Washing Solution Temperature Control Unit Year of Manufacture: 2020 Serial Number: 1003561 Tag No.: MR-INH-VPR61-KK6751 Equipment No.: 20022779 Location: Germany Condition: New, unused, original packaging Technical Data System Type: Washing Solution Temperature Control Unit (Temperature Control Skid) Design: Compact, pre-assembled skid unit in stainless steel frame Frame Material: Stainless steel Insulation: Completely insulated piping and components Pumps: Two circulation pumps with electric motors Stainless steel pump housing Inline design Heat Exchanger: Integrated stainless steel heat exchanger Shell and tube or jacketed tube design Valves: Multiple GEMÜ ball valves Stainless steel valves Pneumatic control valves Safety valves Instrumentation: Pressure transmitter Pressure gauges Temperature measuring points Integrated flow measurement Electrical: Integrated control cabinet or terminal box Ready-wired for connection Industrial standard components Piping: Stainless steel process pipelines Fully insulated Flange and clamp connections Transport: Forklift- and crane-compatible Heavy-duty stainless steel base frame Application The temperature control unit is designed for controlled temperature regulation of a washing solution in pharmaceutical or chemical processes. Suitable for CIP and washing processes, pharmaceutical production lines, chemical processing plants, as well as temperature-controlled media circuits. Construction Compact, modular skid design Pre-assembled and ready to connect High-quality stainless steel construction Industrial-grade quality components, including GEMÜ valves Service-friendly design Condition New system Kjdpfx Adjyl Ib Eeljdt Never used Original packaging Direct from manufacturer’s project Immediately available FAT and Documentation Status Technical documentation available Project documentation available Drawings available P&ID available Component lists available Operating manual available Special Features Completely insulated process piping High-quality stainless steel construction Premium industrial components Ideal for new projects or as a replacement/redundant unit Immediate integration possible

Condition: as good as new (ex-display), 1.000 m barely used HDPE dredge pipe with lose flanges 500 m used HDPE dredge pipe with fixed flanges Kjdpfof Tdn Uox Adledt

Condition: good (used), mileage: 6,07,450 km, power: 175 kW (237.93 HP), first registration: 03/2012, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, loading space length: 60,000 mm, loading space width: 2,410 mm, loading space height: 2,300 mm, Year of construction: 2012, Equipment: AdBlue, Bluetooth, EBS, cruise control, electric window regulation, electronic stability program (ESP), fog lights, power mirror, soot filter, = Additional Options and Accessories = - EPS (Electronic Power Steering) - Particle Filter - Radio/CD Player - Sunroof - Sleeper Cab - Side Door - Toolbox = Further Information = Front Axle: Steered; Suspension: Leaf Spring Rear Axle: Suspension: Air Suspension Unladen Weight: 8,190 kg Payload: 3,800 kg GVW (Gross Vehicle Weight): 11,990 kg Technical Condition: Good Optical Condition: Good Reference Number: 75 Vehicle Number: 75 Mercedes Benz Atego 1224 Carrier Supra 750 / Pipeline Transport / Euro 5 .: WDB9702551L635793 Suspension: Leaf / Air Transmission: Manual Transmission Engine Brake Distance Keeping Assistant Lane Keeping Assistant EURO 5 - AdBlue Wheelbase: 4760 mm Cooling Unit Defective, No Control Unit Brand: CARRIER Type: Supra 750 Cooling Engine: Diesel Internal Dimensions: Length: 6.00 m Width: 2.41 m Height: 2.30 m Special Equipment: Audio System: CD Radio, Power Windows, Graphic Information Display with Eco-Meter, Hydraulic Steering Gear LS 6 / LS 8, Fuel Tank: 180 L, Plastic, Splash Guard on Rear Fender, Reinforced Stabilizer Bar on Rear Axle (for extremely high load) Additional Equipment: Emission Standard EURO 5, Axle Configuration: 4x2, Exterior Mirrors Electrically Adjustable and Heated, Battery 115 Ah, Cockpit Distribution, Roof Hatch (Steel), Cab: S (short), Suspension: Leaf / Air, Generator 80 A, Transmission 6-Speed - Type: G 60-6, Urea Tank (AdBlue): 25 L, Urea Tank (AdBlue): Plastic, Rear Axle H 4, Crown Wheel 368, Interior Filter: Pollen Filter, Body/Structure: Chassis, Atego 2 Model Update, Engine 6.4 L - 175 kW Diesel (OM 906 LA), Engine Start/Stop System, Engine Brake with Constant Throttle, Wheelbase 4160 mm, Disc Brakes, SCR System (AdBlue Technology), Side Underrun Protection, Seats in Cab: Co-Driver Single Seat, Fixed, Seats in Cab: Driver's Seat, Standard Suspension Seat, Rear Underrun Protection, Front Underrun Protection, Immobilizer, Permissible Total Weight 11.99 t No liability for printing and spelling errors, changes, prior sale and errors reserved! = Company Information = No liability for printing and spelling errors, changes, prior sale and errors reserved! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Ksdpfjzrv Ifsx Adledt Tel.: Mobile: Ms. Sabine Faust Email:

Condition: used, Clyde Denseveyor Model 50/12/6 Denseveyor Features the "dome valve" on the feed inlet and product outlet for optimum performance and reliability. Capacity: 1420 litres Inlet: 300 mm dia Conveying Pipeline: 150 mm (6”) NB Vessel No. 5669/2 Year of Manufacture: 2007 Includes dome valves on inlet, outlet and vent line. Kdjdpfozvgu Rsx Adlot Overall height of vessel including isolation valve above inlet: 2960 mm. Dense phase pneumatic conveying of powders and granules. 2 machines available. Also, a 70/12/6 Denseveyor.

Condition: used, Year of construction: 2026, operating hours: 380 h, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production run. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER PK 23002 SH E Power Link Plus loading crane ? Suitable for assembly, lifting, and transport work in difficult terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Can turn on the spot OFF-ROAD CAPABILITIES ? Climbing ability up to 60% ? Side slope up to 40% ? Wading depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Ideal for work off paved roads CAB ? Safety cab with ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control Kjdpfx Adszgzavjledt ? Touchscreen control panel ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Endless slewing ring ? Hydraulic six-stage extension boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning thanks to sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection system ? HPSC stability monitoring system ? Active vibration damping ? Hydraulic winch ? Four-point outriggers ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Specialized forestry work ? Work in peatlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe working even under the most challenging conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road capability with powerful crane technology. Due to its extremely low ground pressure, high payload, and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machines.

Condition: used, mileage: 10,655 km, power: 375 kW (509.86 HP), first registration: 03/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,650 mm, loading space volume: 14 m³, Year of construction: 2023, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: #309 Kdjdpfxovh H Ifj Adlot MAN TGS 26.470 6x4 BL Wiedemann Super 2000 8.0/5.0/1.0, Chassis: MAN * TGS 26.470 * 6x4 BL * 375 kW / 510 HP * EURO 6 * Automatic transmission * Air conditioning Body: Wiedemann enviro tec * Super 2000 8.0/5.0/1.0 water recycling unit * 14,000 litre tank capacity * 8,000 litre sludge volume * 5,000 litre wash water * 1,000 litre fresh water * Discharge by tilting the tank up to 45° Vacuum system: Wiedemann & Reichhardt KW 4000 * 4,000 cbm/h 106 kW * Galvanized pipeline in DN 150 * Approx. 25 m suction hose DN 125 * Suction pipe DN 125 with duct cleaner * Silencer High pressure system: Uraca P3-45 65 413 litres/min at 175 bar * Approx. 180 m HP hose DN 32 * Hydraulic hose reel with approx. 80 m DN 13 Additional fresh water system: Speck NP 25/50-150 with 50 l/min at 150 bar * Spring-loaded hose reel with 15 m pressure hose DN 10 Special features: Sludge and water tanks made of stainless steel 1.4301 * Suction and HP booms * 20-litre warm water hand washing unit * Stainless steel toolbox * Control cabinet with display * Engine start can be operated from the control cabinet * NMV start can be operated from the control cabinet * Radio remote control with display * Equipment cabinet with two doors – on both sides * Hose storage * Pump chamber noise insulation extended upwards * LED work lights * Central lubrication system Technical data: * Unladen weight approx. 19,120 kg * GVW approx. 26,000 kg * Length approx. 10,100 mm * Height approx. 3,650 mm * Width approx. 2,550 mm For further details and/or pictures, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Subject to changes, prior sale, and errors. The buyer is responsible for verifying the condition and equipment of the goods independently. Sale takes place exclusively under our Terms and Conditions and excludes all warranties.

Condition: used, Year of construction: 2026, In use with the Lehnhoff MS03 system WVE.250 Roller width 250 mm For excavators from 1.5 t to 7 t Roller diameter 600 mm Overall height without adapter 650 mm Weight 190 kg What is a compaction roller used for? A compaction roller on an excavator is primarily used to efficiently compact soil, trenches, slopes, and backfill in earthworks and road construction. It is ideal for hard-to-reach areas, offers a safe alternative to manual compaction, and enables fast, uniform compaction – without vibration. Safety: No personnel need to stand directly in the trench. Important areas of application and functions: Trench construction + pipeline zones: Compacting soil in the trench, especially around pipes, without damaging them. Slope and surface compaction: Stabilizing steep slopes, backfilling foundations, or large areas. Gardening and landscaping: Soil compaction in narrow or difficult areas. Demolition + road construction: Re-compacting layers after filling operations. Dimensions, price, and weight without adapter Kdedpfozw Ngxjx Adlet

Condition: used, For sale: Professional pipe beveling/chamfering machine by FEIN with GF (Georg Fischer) RA4 head, mounted on a solid workshop stand for pipe processing. This device is used for beveling pipe ends prior to welding—preparing a V-type weld edge. Industrial equipment used in pipeline workshops, industrial installations, and when constructing process plant systems. The machine is of very robust construction, made in Germany. Comfortable operation thanks to a stable stand. Technical data Kdjdoyt Ifgjpfx Adlst • Drive manufacturer: FEIN – Made in Germany • Model: 680 CB1641 • Power: 1600 W • Voltage: 200–240 V • Frequency: 50–60 Hz • Current: 8.8 A • Speed: 150–270 rpm Head • Manufacturer: Georg Fischer (GF) • Type: RA4 Applications • Pipe beveling • Pipe preparation for welding • Pipeline work • Welding workshops • Industrial installations Visual and technical condition as shown in the photos. Solid industrial-grade machine.

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone). WEBER CR 7 MDM Hatz Diesel Vibratory Plate Compactor / New unit / in stock & immediately available Ksdpfeymv Snjx Adledt Sales price: €9,190.00 net / €10,936.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series stand out for their strong compaction performance and maximum efficiency. They are the first choice for compaction work in classic road and civil engineering, as well as paving construction. Balanced running characteristics, extremely smooth operation, and low hand-arm vibrations ensure a high level of operator comfort. CR 7 – Performance and Comfort in Perfection: - Infinitely variable forward and reverse travel. Hydraulic direction change - Throttle lever and hydraulic change-over protected within the guide bar - Low hand-arm vibrations - Fatigue-free operation with the height-adjustable guide handle - Protection for machine and engine through robust protective frame and full engine enclosure - Reduced maintenance thanks to self-tensioning centrifugal clutch - Easy servicing: all maintenance points are easily accessible - Safe and fast loading via a large, foldable lifting eye - Secure lashing for transport thanks to additional eyelets on the engine mount - Enhanced operating comfort with electric start including hour meter, engine oil and battery voltage monitoring - Fields of application: road and civil engineering, pipeline and trench construction, landscaping, sub-base for paving, setting pavers, and compaction of sand, gravel, or crushed stone Technical Data Engine: Hatz Diesel Maximum engine output: 7.5 (10.3) kW/HP Weight: 477 kg Centrifugal force: 65 kN Frequency: 74 Hz Working width: 65 cm We can also provide a financing offer upon request. We are an official sales and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni telescopic handlers - JCB construction machinery - Mercedes-Benz - Iveco With a stock of 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We provide the complete Weber MT product range for you! Subject to errors and prior sale. = Additional Information = New: Yes Engine make: Hatz Contact Marius Herden for further information.

Condition: excellent (used), functionality: fully functional, volume flow: 170 m³/h, Industrial 2-cylinder pump/compressor unit on a heavy-duty steel frame, protected for transport and storage. Driven by a large three-phase motor (see photo). Suitable as a transfer pump, compressor, or vacuum pump – please check the exact design on-site (type plate visible on the motor). Also available are large stainless steel pipelines with flanges and a filter basket (see photos) – the corresponding suction or drainage set can be sold separately. Prices: - Pump unit alone: EUR 6,000 net, negotiable - Complete package: EUR 7,000 net, negotiable Technical data: Pump unit: - Design: 2-cylinder transfer pump - Drive: Three-phase 400 V (large motor, see photo) - Frame: Steel transport frame with anchoring points - Connection: Flange, approx. DN 80-100 Tank/suction pipe set: - Material: Stainless steel (suction pipes, flanges, filter basket) - Length: approx. 2-3 m per part - Application: e.g., pump sump, suction basket for containers Kdsdpfx Aozab Dpedlst Collection/transport: Self-collection with forklift/crane. Shipping by freight forwarder by arrangement.

Condition: like new (used), For sale is a high-quality KSB industrial shut-off valve in a heavy-duty steel casting design. Kjdpfx Ajztqmxjdlodt Technical specifications: * Manufacturer: KSB * Nominal size: DN 100 * Nominal pressure: PN 40 * Housing material: 1.0619+N / GP240GH+N steel casting * Connection: Flange * Actuation: Handwheel * TA-Luft version/marking * Marking on the handwheel: 290 Nm / 40 cycles * Robust industrial design * Suitable for industrial pipelines and process plants, depending on the medium used and the operating conditions Condition: Stock item with minor storage marks or slight surface rust. See original photos.

Condition: new, Year of construction: 2026, Capacity: 7000 m³/h Motor power: 7.5 kW Voltage: 3-phase / 380 V Net/gross weight: 800 / 900 kg Dimensions (L x W x H): 2965 x 1160 x 3063 mm Material: Flowerless galvanized steel sheet, zinc coating: 80 g/m² (both sides) Minimum water flow rate: 20 L/min Minimum required pressure: 1 bar Sound power level: 65 - 75 dB(A) Vacuum: 2500 - 2800 Pa Filtration area: 45 m² Dust container: 618 x 555 x 640 mm (0.22 m²) Safety and ATEX compliance Kedpfezx A Hbox Adledt Designed for use in potentially explosive environments Dust collection in accordance with ATEX requirements. A robust design and an effective dust extraction system support safe and efficient work in professional industrial applications. Efficient Sawdust and Dust Removal This vacuum sawdust extractor is designed for the effective collection of waste generated during the operation of woodworking machines. The system is ideal for extracting sawdust, shavings, and fine dust in workshops and production plants, improving workplace cleanliness and safety. Vacuum Filtration System The device operates using bag filtration technology using negative pressure generated by a powerful fan. Contaminants are transported into the extractor, where larger fractions fall directly into collection containers, while fine dust is retained on the surface of the filter bags. Automatic Filter Cleaning The system is equipped with a vibration filter cleaning mechanism, which helps maintain high filtration efficiency and stable performance. After the device finishes operating, the cleaning process is automatically activated, reducing dust buildup on the filters and improving user comfort. Universal Application The device is primarily designed for use with woodworking machines and machining lines, where effective removal of light production waste and maintaining appropriate working conditions are essential. Fire Suppression System – Water Sprinkler The extractor is equipped with a fire suppression system with a water sprinkler, permanently connected to the fire protection system via a pipeline maintained under constant water pressure. The sprinkler system must be connected to the fire protection system in accordance with the manufacturer's requirements. Explosion-Resistant Plate The extractor is equipped with an explosion-proof plate, designed to increase work safety in environments with dust explosion hazards. This element allows for controlled release of excess pressure in the event of a sudden increase in pressure within the system, reducing the risk of damage to the device and improving dust extraction system protection.

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. Kodpfx Aorhidmsdlodt The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: new, Year of construction: 2026, Capacity: 11,000 m³/h Motor power: 11 kW Voltage: 3-phase / 380 V Net/gross weight: 1000 / 1100 kg Dimensions (L x W x H): 3661 x 1160 x 3063 mm Material: Galvanized steel sheet, flowerless, zinc coating: 80 g/m² (both sides) Minimum water flow rate: 40 L/min Minimum required pressure: 1 bar Sound power level: 65 - 75 dB(A) Vacuum: 2800 - 3100 Pa Filtration area: 60 m² Dust container: 618 x 555 x 640 mm (0.22 m²) Safety and ATEX compliance The design has been adapted to work in environments Explosive dust in accordance with ATEX requirements. A robust design and an effective dust extraction system support safe and efficient operation in professional industrial applications. Efficient Sawdust and Dust Removal This vacuum sawdust extractor is designed for the efficient collection of waste generated during the operation of woodworking machines. The system is ideal for extracting sawdust, shavings, and fine dust in workshops and production plants, improving workplace cleanliness and safety. Vacuum Filtration System The device operates using bag filtration technology using negative pressure generated by a powerful fan. Contaminants are transported into the extractor, where larger fractions fall directly into collection containers, while fine dust is retained on the surface of the filter bags. Kdodpfezx A Ryex Adljt Automatic Filter Cleaning The system is equipped with a vibration filter cleaning mechanism, which helps maintain high filtration efficiency and stable performance. After the device finishes operating, the cleaning process is automatically activated, reducing dust buildup on the filters and improving user comfort. Universal Application The device is primarily designed for use with woodworking machines and machining lines, where effective removal of light production waste and maintaining appropriate working conditions are essential. Fire Suppression System – Water Sprinkler The extractor is equipped with a fire suppression system with a water sprinkler, permanently connected to the fire protection system via a pipeline maintained under constant water pressure. The sprinkler system must be connected to the fire protection system in accordance with the manufacturer's requirements. Explosion-Resistant Plate The extractor is equipped with an explosion-proof plate, designed to increase work safety in environments with dust explosion hazards. This element allows for controlled release of excess pressure in the event of a sudden increase in pressure within the system, reducing the risk of damage to the device and improving dust extraction system protection.

Condition: excellent (used), INFICON Sensistor ISH2000 Hydrogen Leak Detection System Manufacturer: INFICON Type: Sensistor ISH2000 Article Number: 590-750 Device Type: Hydrogen Leak Detector Description Professional hydrogen leak detection system consisting of INFICON Sensistor ISH2000, INFICON TGF10 Tracer Gas Filler, and AP57 Search Probe. The system is used for industrial leak testing using the hydrogen tracer gas method. Technical Data Supply: 100 - 240 VAC Frequency: 50 / 60 Hz LCD display Ksdszdggwepfx Adlsdt Printer port Probe control port TGF10 Tracer Gas Filler Tracer gas pressure: 0 - 9 bar Compressed air supply: 4 - 8 bar Evacuation rate: 70 Nl/min Filling rate: 600 Nl/min Ultimate vacuum: -0.85 bar Weight: approx. 4.7 kg Equipment Sensistor ISH2000 TGF10 Tracer Gas Filler AP57 Counter Flow Probe Connection cable Power cable Original packaging Accessories as shown in the pictures Application Areas Leak testing of pipelines Heat exchangers Pressure vessels Refrigeration and air conditioning components Automotive industry Industrial and testing facilities Condition Used Visual condition as shown in the pictures Normal storage and usage marks present Scope of delivery as shown in the picture. Changes and errors in the technical data and prior sale are reserved.

Condition: used, mileage: 80,000 km, power: 206 kW (280.08 HP), first registration: 07/1986, fuel type: diesel, overall weight: 16,000 kg, color: white, gearing type: mechanical, * Mercedes-Benz 1928 NG V8 4x4 * Uraca high-pressure pump line flushing unit * Pipeline flushing device * First registration: 1986 * 80,000 km * Double H manual transmission * Leaf-leaf suspension * 4x4 all-wheel drive * Wheelbase: 3.60 m * Permissible total weight: 15,130 kg * Self-propelled working machine Kodpoyq Azdofx Adljdt * Rexroth hydraulic power unit * Uraca KD412 high-pressure pump * Max. 915 L/min * Max. 240 bar * Max. 100 degrees Celsius * Power consumption: 80-400 kW

Condition: used, Year of construction: 2003, Technical details: turning diameter over bed: 720 mm turning dia. over face-slide: 430 mm turning length: 2000 mm bed width: 480 mm centre distance: 2000 mm centre height: 360 mm face slide travel: 410 mm control: Siemens Sinumerik 810D Weiler D2 Steuerung revolution per minute: 1 - 1800 U/min Kjdezdn S Hjpfx Adledt spindle diameter: 280 mm spindle bore: 216 mm spindle head: DIN 55026 - Größe 15 max. torque on the spindle: 4300 Nm tailstock taper ISO: MK 6 tailstock quill stroke: 225 mm tailstock quill diameter: 115 mm total power requirement: 30 kW Weight approx.: 6,2 t dimension machine approx.LxWxH: 4,3 x 2,5 x 1,95 m WEILER E70 x 2000 Oil Country Lathe – Rare Special Version with 216 mm Spindle Bore We are pleased to offer this exceptionally rare WEILER E70 x 2000 Oil Country Lathe, manufactured in 2003, in very well-maintained condition. This machine is not a standard WEILER E70, but a factory-built special Oil Country version, specifically designed for machining long pipes, bar stock and large-diameter workpieces. Featuring an extra-large 216 mm spindle bore, this machine is one of the rare WEILER Oil Country Lathes and was specially developed for demanding applications in the oil & gas, pipeline, energy and heavy engineering industries. Wide Range of Applications Thanks to its rigid construction, large spindle bore and heavy-duty design, this machine is ideally suited for: Oil & Gas Industry Drill Pipe Machining Casing and Tubing Pipes Pipeline Construction Energy Industry Steel and Pipe Mills Mechanical Engineering Heavy Equipment Manufacturing Repair and Maintenance Workshops Machine Repair Companies Tool and Die Shops General Engineering Workshops Job Shops and Contract Manufacturing Single-Part and Small Batch Production Hydraulic Cylinder Manufacturers Companies machining large bars, shafts and tubular materials *

Year of construction: 1986, condition: used, functionality: fully functional, Equipment: documentation/manual, BVL Rotocleaner 750 The cleaning and degreasing system with steam extraction fan and oil skimmer is in good used condition. Ksdewzwfgspfx Adlodt Manufacturer: BVL Oberflächentechnik Year of manufacture: 1996 In 2011, the washing machine was completely overhauled, and the gear motor, heater, gas spring, and heating element were replaced. Automatic basket washing system with removable rotating basket. Basket diameter: 720 mm (internal diameter) Basket height: 140 mm (internal height) Maximum usable height (washing material): 450 mm Maximum batch weight: 500 kg External dimensions: Width 1190 mm, Depth 1170 mm, Height 1170 mm. Weight: 290 kg Operating manual, technical documentation, and CE declaration of conformity for the system are available. The housing of the cleaning system and the associated pipelines are made of stainless steel. Cleaning is performed using a special nozzle system with wide-band nozzles and a driven rotating basket. A U-shaped spray system ensures easy operation with high efficiency. The nozzles are supplied by a powerful circulation pump, which ensures intensive treatment and is equipped with a carbide mechanical seal. Heated tank in the lower part of the system. If the liquid level falls below a certain point, a fixed water connection ensures automatic refilling. This ensures safety for the heating elements and pump, as well as clean and precise dosing of the required amount of water. Internally located return baskets filter out coarse dirt from the washing liquid. A vapor extraction system removes steam before the hood is opened. The lid is supported by a gas spring. Easy-to-use filling system enables a fast workflow. Loading via crane is possible. Price: Negotiable Our asking price is €2,200.00 net ex works, plus packaging costs. All technical specifications are subject to printing errors and omissions. Sale is only to countries within the EU.

Condition: new, functionality: fully functional, power: 2.3 kW (3.13 HP), fuel type: gasoline, color: yellow, operation weight: 70 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson BS 68-4 A Rammer – NEW Wacker Neuson BS 68-4 A Rammer – NEW | 689 blows/min | 70 kg operating weight | Impact force 19 kN | Honda GXR 120 petrol engine | 28 cm shoe width Item number: 5100068375 Technical Data: Manufacturer: Wacker Neuson Model: BS 68-4 A Condition: NEW Operating weight: 70 kg Blow rate: max. 689 strokes/min Kdjdpfozh D A Nox Adlet Impact force: 19 kN Engine: Honda GXR 120 petrol engine Engine power: 2.3 kW Starting system: Recoil start Shoe width: 28 cm Highlights & Equipment: - Powerful 4-stroke rammer – ideal for demanding compaction tasks - Robust Honda engine – reliable & low maintenance - Shoe width 280 mm – other sizes available - Compact design – for precise work in confined spaces - Made by Wacker Neuson – proven quality, immediately available Applications: ✓ Cable & pipeline construction ✓ Landscaping & horticulture ✓ Compaction in trenches & narrow areas ✓ Municipal works & construction companies ✓ Fibre optic & network installation Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery: Nationwide and international delivery on request Pricing: Ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All details subject to change. Errors and prior sale excepted. Prices plus VAT / VAT excluded Other versions available! Also available with 25 cm & 33 cm shoe plates ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson rammers | BS 68-4 A NEW | Petrol rammer with Honda GXR 120 | Compaction equipment for cable & trench work | Wacker Neuson quality Your reliable partner for compaction technology & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Enquire now & secure immediately available new machines! Virtual machine viewing via video call available on request.

Condition: excellent (used), Pfeiffer Pfeiffer Vacuum HLT 560 Helium Leak Detector Professional leak testing, sniffer & vacuum modes with backing pump: Vacuubrand MV 10 NT (max. approx. 10–11 m³/h) Description: For sale is a professional helium leak detector, Pfeiffer Vacuum HLT 560. This device is designed for high-precision leak testing using helium and is typically used in industry, manufacturing, quality assurance, laboratories, and technical service applications. It is capable of reliably detecting even the smallest leaks. The HLT 560 uses mass spectrometry and can be operated in both vacuum and sniffer modes. With the sniffer probe, leak locations can be pinpointed, while in vacuum mode, entire assemblies or systems can be inspected. Integrated turbopump and backing pump make this unit a complete, mobile testing system. Application areas (examples): • Leak testing of components and assemblies • Testing of vacuum chambers, pipelines, valves, heat exchangers • Quality control in production • Service and maintenance of vacuum technology systems Technical Data: Manufacturer: Pfeiffer Vacuum Model: SmartTest HLT 560 Integrated turbopump Backing pump: Vacuubrand MV 10 NT (max. approx. 10–11 m³/h) Test gas: Helium Measuring principle: Mass spectrometric helium leak detection Operating modes: Vacuum operation / sniffer operation Reference leak rate: (7.4 ±15%) × 10⁻⁷ mbar·l/s Dimensions (approx.): Height: 110 cm Width: 50 cm Depth: 60 cm Interfaces: RS232, RS485, Relay I / II, gauge connection Power supply: 230 V / 50 Hz Power consumption: approx. 400 VA Weight: approx. 70 kg Condition: used Scope of delivery: (see photo) Kjdpfx Ajzix Hxsdlodt (Specifications and technical details subject to change and errors!) For further questions, please feel free to contact us by phone.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Nanjing Estun, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 0.5 °, stroke rate (min.): 15 1/min, stroke rate (max.): 15 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge speed R-axis: 40 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 400 V, oil tank capacity: 220 l, overall weight: 7,000 kg, total length: 3,950 mm, total width: 1,700 mm, total height: 2,150 mm, number of support arms: 3, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, QC11K-8/3200 Guillotine shearing machine The frame adopts an all-steel welded structure, boasting sufficient strength and rigidity. Internal stresses are eliminated through normalizing and high-frequency vibration treatment to ensure the overall precision of the machine body. German large-scale floor-type boring and milling machines are employed for precision machining using a one-time processing method, guaranteeing exceptional machining accuracy. It features a hydraulic swing-type structure with an upper tool rest return device powered by nitrogen cylinders, enabling fast return speeds. The hydraulic system utilizes an integrated logic circuit controlled by sequence valves, ensuring stable operation, low noise, and straightforward maintenance. Tool rest movement is regulated by hydraulic valves for precise control. Kodpfxjy Uquhs Adljdt The material pressing device incorporates an integrated circuit and independent parallel clamping cylinders. When dealing with uneven sheet metal, the cylinders can expand and contract freely to securely clamp the material. The clamping force is adjustable according to the sheet material and thickness, preventing any damage to the sheet surface. Motorized adjustment allows for quick setting of the blade gap, offering simple operation to adapt to shearing requirements of different sheet thicknesses and materials. Control is achieved through a numerical control (NC) system, enabling fixed-stroke shearing operations. An optical line alignment device facilitates scribed line shearing for enhanced accuracy. The electrical control system is centralized and reliable, with the following key features: All power facilities are installed within the machine body, operated and controlled via buttons on the control panel. A foot switch is provided for direct and convenient operation of the shearing action. Core electrical components are sourced from Schneider for guaranteed quality and reliability. Circuit breakers are installed to protect the control circuit against short circuits. Motor thermal-magnetic circuit breakers provide protection against motor overload and short circuits. The hydraulic system is designed for safety and reliability: The hydraulic system manifold block is equipped with a direct-acting safety relief valve to ensure accurate pressure adjustment. A pipeline check valve is specially installed at the pump head to protect the oil pump from hydraulic shock. Both upper and lower blades are made of high-quality materials and undergo full heat treatment, ensuring sufficient hardness and a long service life. The ball-rolling worktable and front material supporting device facilitate easy feeding while preventing scratches on workpieces during operation. The CNC back gauge device is equipped with high-performance servo motors, drives, precision ball screws, and linear guides, achieving a positioning accuracy of ≤±0.1mm. For the CNC electrical system:The back gauge is controlled by the E21S simple CNC system. Users can directly input the desired values, and the back gauge automatically moves to the specified position upon confirmation. Transmission is achieved through a motor-driven precision lead screw and nut assembly, with digital display via a counter. Fine-tuning for free size correction is not configured to ensure shearing precision, with an error of ≤0.2mm per meter. Three front support arms are fixed on the worktable, providing convenient placement for shearing materials.

Condition: used, 1 item = 720 kg of BÖHLER-THYSSEN stick electrodes Welding electrodes for electric arc welding Stored dry, in 6 kg packages Type Phoenix SH Yellow B + Phoenix Special Yellow AWS A5.1-91 Item No. 18952 Electrode diameter: Ø 5 mm Electrode length: 450 mm DIN: EN 499-E38 2 RB 12 - Rutile-based stick electrode. - Easy welding in root, fill, and cover passes - Excellent welding in all positions - Suitable for X-ray quality welding in pipeline, boiler, and tank construction - Can be used on factory-coated sheets - In unopened original packaging, stock item Total weight: 720 kg Kodpfx Adjxcnktelodt The scope of delivery is: 30 packages of stick electrodes, each containing 24 kg are available 1 package = 24 kg of stick electrodes, welding electrode for electric arc welding = 4 packages of stick electrodes, each containing 6 kg 720 kg = 120 packages, each containing 6 kg = 30 packages, each containing 24 kg

Condition: good (used), Here we offer a PINK vacuum drying oven. PINK vacuum drying oven Space requirements for operation and maintenance: Width min. 3000 mm Height min. 2500 mm Depth min. 2500 mm Dimensions of the vacuum drying oven: External dimensions: Width approx. 1170 mm, Depth approx. 1380 mm, Height approx. 1615 mm Overall height 1970 mm Internal dimensions: Width approx. 360 mm, Depth approx. 735 mm, Height approx. 300 mm Volume of vacuum chamber 79 liters Operating temperature min. 20 °C, max. 150 °C Electrical connection: Supply voltage 3 x 400 V; 50 Hz, N / PE, 8.5 kVA Kdsdpfx Aszdi Ivsdlot Heating power 6 kW Cooling power 6 kW at 15 °C medium temperature and 15 °C cooling water temperature Heating: Floor, ceiling, side walls and door, double-walled; heat transfer medium flows through Heat transfer medium: Heat transfer oil Mobiltherm 32, filling quantity approx. 20 liters, depending on the length of the pipeline Compressed air: Pressure 6 bar Nitrogen N2: Pressure Nitrogen N2 pressure Permissible operating overpressure: Vacuum chamber -1 / +0.1 bar Heating system 3 bar Weight: 300 kg Type: PINK VT 300-600-300-1 Condition: used Scope of delivery: (PINK VT 300-600-300-1, operating manual) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.