Used Pneumatico Wt-2 for sale (78,419)

Condition: used, Year of construction: 2008, Working width: 260 mm Working height: 130 mm Number of working spindles: 5 Spindle arrangement: bottom, right, left, top, bottom Grooved bed: yes Motor power bottom spindle: 5.5 kW Motor power right spindle: 5.5 kW Motor power left spindle: 7.5 kW Motor power top spindle: 7.5 kW Motor power bottom spindle: 7.5 kW Bottom spindle adjustment: handwheel Right spindle adjustment: handwheel Left spindle adjustment: handwheel Top spindle adjustment: handwheel Cutterheads: Centrolock Feed speed: stepless Feed roller pressure: pneumatic Current consumption: 50 A Current consumption: 71.7 A Motor brake: automatic Nledpoyhgkdofx Airsh Extraction connection: Machine length: Machine width: Weight: 4500 kg

Year of construction: 1982, condition: used, degree 1150 working heigth 200 mm length 1000 mm width 800 mm depth 1400 mm Coil Weight per Base 300 kg Base Diameter mm Stack height 0 mm Nedpfx Ast Hw Rwjirjlh No. – Furnace 0 No. – Base 0 No. – Cooling Hood 0 total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: as good as new (ex-display), Year of construction: 2025, working width: 1,525 mm, sheet thickness (max.): 100 mm, overall weight: 6,400 kg, The 42 series provides the solution for manufacturers who deliver premium quality products. This top-level quality is achieved by a multi-rotating brush unit with 8 abrasive flap brushes, which perform uniform deburring and produce perfectly rounded metal edges. This is a multidirectional rotary brush machine (RB) for consistent deburring and finishing of flat metal parts. It enables all-round processing in a single pass, giving the workpiece a non-directional surface finish. Equipped with one or more abrasive belt units (W) for pre-deburring and fine grinding. Cup brush unit (TB) for deburring, edge breaking, non-directional finishing, or removal of scale. Nedpfoxw Ih Uex Airjlh - Abrasive belt unit (self-calibrating) - Cup brush unit (self-calibrating) - Rotary brush unit with 8 brushes (self-calibrating)

Condition: used, Weiss Temperature test chamber / climate test chamber Weiss WT-270/70/10 temperature test chamber Temperature test chamber, water-cooled, -70 °C to +180 °C For sale is a used temperature test chamber from the manufacturer Weiss Umwelttechnik GmbH. The test chamber is suitable for temperature tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Weiss Umwelttechnik GmbH Type: WT-270/70/10 Device type: Temperature test chamber / climate test chamber Test chamber volume: approx. 270 liters Test chamber dimensions: approx. 580 x 750 x 615 mm (W x D x H) Housing dimensions: approx. 870 x 1775 x 1745 mm (W x D x H) Weight: approx. 835 kg Temperature range: -70 °C to +180 °C Temperature change rate heating: approx. 10 K/min Temperature change rate cooling: approx. 14.5 K/min Temperature deviation over time: ± 0.3 to ± 0.8 K Temperature deviation spatially: ± 0.5 to ± 2 K Refrigerant: R404A / R23 Refrigerant quantity R404A: 6.5 kg Refrigerant quantity R23: 2.3 kg Maximum suction pressure: 19 bar g Maximum discharge pressure: 25 bar g Standby pressure: 17 bar g Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 14 kW Rated current: 26 A Equipment Touch panel operation Viewing window in the door Interior made of stainless steel Test chamber lighting Side openings Shelf / test chamber equipment as shown in the pictures Control cabinet Main switch panel Connector panel RS232 interface Documentation / operating manual Accessories as shown in the pictures Application areas Nlsdpfxjzgcqvs Airsh Temperature testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of delivery 1x Weiss WT-270/70/10 temperature test chamber Documentation / operating manual Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, mileage: 7,43,776 km, power: 279 kW (379.33 HP), first registration: 06/1982, fuel type: diesel, tire size: 295/80R22.5, axle configuration: 6x2, wheelbase: 4,200 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 10, suspension: steel, total width: 2,500 mm, Year of construction: 1982, Equipment: crane, trailer coupling, = Additional Options and Accessories = - Lift axle - Pintle hitch - Power Take-Off (PTO) - Radio - Sun visor = Notes = Original Dutch truck. APK / TUV / MOT: 02-17-2027 = Further Information = Technical Information Number of cylinders: 8 Axle Configuration Tire size: 295/80R22.5 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Steered; Tire tread depth left: 80%; Tire tread depth right: 80% Rear axle 1: Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 2: Dual tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Nsdpfx Aioyvi I Norslh Weights Unladen weight: 15,350 kg Payload: 9,150 kg GVW: 24,500 kg Functional Crane: - Maintenance APK (Technical Main Inspection): Valid until 02/2027 Financial Information Price: On request Identification Model number: R142 V8 6x2 / TOW TRUCK = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, WT-2000PV, µ-PCD, Semilab measuring device for solar cell production Nledpfx Aiepvkt Ssrsh Model: WT-2000PV Type: µ-PCD Condition: Used

Condition: new, Year of construction: 2025, functionality: fully functional, The AT-3000 is an advanced automatic pallet nailer designed for maximum efficiency and intuitive operation. It offers the flexibility to produce different types of pallets on a single machine by simply changing the template. Nodpfx Aswq Izwjirjlh

Condition: excellent (used), Sub-spindle, Y-axis, C-axis FANUC 18i-TB control Turning diameter max 250 mm Nsdpfjx A Eupex Airelh Turning length -555 mm Chuck Diameter -165 mm Main-spindle speeds 50-4'500 rpm Sub-spindle speeds 5'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Tool presetting device Barloader Piece catching device Misc. accessories MARCELS MASCHINEN CH

Year of construction: 2006, condition: good (used), For sale are 3 Siemens component placement machines, consisting of: 1 unit X 2 (year of manufacture 2006), model B 348 = €10,900 + VAT Nodpfx Aisyrm E Aerslh 1 unit X 2 (year of manufacture 2006), model B 251 = €10,900 + VAT Both machines have been inspected and tested for full functionality in our workshop. All machines have a valid maintenance report. An on-site inspection is possible and desired. Please refer to the photos for the technical data and configuration of the respective machines. We will also be happy to answer any questions you may have about the machines in person. Upon request, a reference run video is available for each machine. We can also carry out modifications for your specific application for an additional charge. The machines are sold without component tables or MTC. Location of the machines: Zollner Elektronik AG / Warehouse Roding / Buchenstraße 18 - 20 / 93426 Roding

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-256-73-1249, working width: 1,350 mm, grinding belt length: 2,150 mm, workpiece height (max.): 160 mm, grinding belt width: 1,370 mm, volume flow: 3,660 m³/h, TECHNICAL DETAILS Working width: 1,350 mm Workpiece thickness: min. 3 mm / max. 160 mm Sanding belt width: 1,370 mm Sanding belt length: 2,150 mm Unit 1 – Contact cylinder Sanding belt cutting speed: 18 m/s Rubber cylinder: 65° Cylinder diameter: 240 mm Combination sanding unit Sanding belt speed: 12 m/min Rubber cylinder: 55° Shore Cylinder diameter: 140 mm Nedpezvnfwefx Airelh Width of pneumatic foot: 80 mm MACHINE DETAILS Voltage: 400 V / 50 Hz Drive power Unit 1: 15 kW Drive power Unit 2: 15 kW Total power consumption: 33 kW Dust extraction connection Unit 1: Ø 180 mm Dust extraction connection Unit 2: Ø 180 mm Dust extraction volume: 3,660 m³/h Recommended dust extraction speed: 20 m/s Compressed air requirement: 20 l/min at 6 bar EQUIPMENT Sanding belt change on the left side Automatic clamping of the contact cylinder, e.g., during belt change Automatically adjustable rubber cylinder Grain size compensation on the contact cylinder Combination sanding unit L with pneumatic foot for calibration Automatic anchoring/fastening Grain size compensation on the rubber cylinder Automatically adjustable pneumatic foot

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL V2.1 (Power TOUCH) Nlodpoz Erw Hofx Airoh Software CADmatic 5 (TAPIO READY) Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 with clamps / grippers (7 + 2) Max. cutting width (mm) 3800 - Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 125 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 (ca.) Main Sawing Unit (max saw diameter / power) mm 450 / Kw 28 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 3 (2 x 2160mm x 800mm + 1 x 2810mm x 800mm) Total power (Kw) 34

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, Year of construction: 2000, pressing force: 2 t, throat depth: 150 mm, Hydraulic Press Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Stroke (mm): 150 Down Speed: 60 (mm/s) Up Speed ​​73.8 (mm/s) Working Area Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Body Size Nlsdpfx Aiovbdyforeh ​ Height (mm) 987 Width (mm) 505 Depth (mm) 735

Condition: used, maximum load weight: 2,444 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 10/2023, next inspection (TÜV): 03/2028, loading space length: 3,731 mm, loading space width: 1,782 mm, loading space height: 1,864 mm, total length: 5,201 mm, total width: 2,283 mm, total height: 2,343 mm, Equipment: ABS, * Ifor livestock trailer * Loading ramp * 1 partition gate * Swivel gate * Side door, split * Knott inertia coupling with drum brake * Ifor axles * Chocks ----Internal vehicle number: 12495-----Errors and prior sale excepted WhatsApp support available! If you have any questions about the vehicle or would like more information, feel free to contact us conveniently via WhatsApp. Nljdpfjz R Ia Nsx Airoh WhatsApp WhatsApp

Condition: new, Year of construction: 2024, The item for sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT440120 Main motor power: 75 kW Hydraulic system motor power: 5.5 kW Working rotor length: 1200 mm Rotor diameter: 400 mm Number of knives: 70 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, with the option of mounting a second row of fixed knives (upper) depending on the type of waste being processed Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen, assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, receiving conveyor with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Nledpeq Sp Hdsfx Airsh Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: excellent (used), Year of construction: 2003, Langzauner LZ 5/2 - 3500 Veneer saw, precision cutting saw with jointing unit (planing unit) and veneer stop table. Robust machine construction by Langzauner. A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick-cut veneer. Cutting length max. 3500mm Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display The stop table is very robustly built and runs on parallel round guides; it is slightly offset to the right so that cross-cuts can be made on the left side of the veneer packs. Angle stop on the stop table and on the front support for head cuts of the veneer packs Special equipment with rack and pinion compensation for the pressure bar, which prevents the pressure bar from skewing Pneumatic workpiece clamping, also holds in the center position Drive motor saw 2.2kW, milling unit 1.1kW The motors can be practically switched on at the handle, so they only run when needed. When switched on, the saw and milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions via a revolving stop. Carbide-tipped precision cutting blade, sharpened Planer head Z4 with pull-cut, equipped with new carbide reversible inserts and spare blades included Practical front veneer support, automatically pneumatically extended when using the planing unit Dust extraction connection 150mm with dust extraction duct V-belt renewed CE marking Emergency stop cable Operating manual Onboard tools Original paint, only a few spots have been touched up. Nledpfx Ao Afznueiroh The machine is in excellent condition and has obviously been used only rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 58226018400020, Weiss Temperature Chamber Type: WT11-270/70/10 Section No.: 58226018400020 Control: Simcon/32-NET Version: 00.1902 Ports: Left (2x) NW 50 mm, Right (3x) NW 125 mm Temperature Range: -70°C to 180°C Test Chamber Volume: 270 liters Door with window, interior lighting Water-cooled temperature chamber Compressed air dryer type: ZANDER Temperature change rate cooling: 10 K/min Temperature change rate heating: 10.0 K/min Temperature deviation over time ± 0.1 to ± 0.5 K Njdpfx Aijv T Tncsrjlh Temperature homogeneity over space ± 0.5 to ± 2.0 K Test Chamber Dimensions: Width 580 mm x Depth 615 mm x Height 750 mm Housing dimensions: Width 895 mm x Depth 2080 mm x Height 1950 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 14 kW, Rated current 26 A Refrigerant: R-404A/R-23

Condition: used, axle configuration: 3 axles, first registration: 02/1999, next inspection (TÜV): 04/2025, loading space length: 7,000 mm, loading space width: 2,300 mm, loading space height: 1,750 mm, Kempf Tipper Semi-Trailer - Type: SK34/3 - Two-way tipper - Aluminum side walls - Drum brakes - LED rear lights - Next safety inspection (SP) due: 10.2024 Errors and prior sale excepted. Internal vehicle number: 10581 WhatsApp support available! Njdpfx Aiovv Dkasrelh If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp.

Year of construction: 2020, condition: excellent (used), WM1 300 CNC incl. Renishaw TP 200 Year of manufacture: 2020 Clamping tool from DK Fixiersysteme 3-axis CNC control High-resolution CCD matrix camera 1.5x magnification Incident light illumination via LED ring light, 4 sectors and 1 ring individually switchable Precision measuring table in X and Y axes Diode laser for positioning assistance Joystick and trackball for axis movement with fast/slow switching Camera-supported measurement data acquisition Precise edge detection in transmitted and incident light using intelligent image processing algorithms Compact and portable – powerful performance Easy handling with maximum measurement accuracy Special features Including Renishaw TP 200 touch probe system Nlsdeyuut Tepfx Aireh Switchable LED surface illumination Diode laser for positioning assistance With a measuring range of 300 mm × 200 mm × 200 mm, it excels especially in the measurement of stamped, plastic, rubber and milled parts as well as tools, profiles, and PCBs. Key features of the measuring microscope include camera-assisted data acquisition, quick operation, and its high precision. Of particular note is the precise edge detection in transmitted and reflected light, powered by smart image processing algorithms. Despite its powerful capabilities, the WM 1 300 CNC remains compact and handy with dimensions of 900 mm × 950 mm × 950 mm.

Condition: excellent (used), Catalog number 7687 TECHNICAL DATA - inlet width 540mm - inlet height 300mm - shaft width 630mm - shaft diameter 700mm - knife length 630mm - number of knives 2 pcs - screen dimensions 40x40mm - toothed pull shaft (bottom) - lower shaft motor 4kW - toothed pull shaft (top) - upper shaft motor 4kW - belt conveyor - length of feed belt 4720mm Nlsdpfxozx Rngs Airoh - width of feed belt 500mm - main motor 75kW - auto-reverse (adjustable) - overall machine dimensions (L/W/H) 3100x2000x1830mm - overall feeder dimensions (L/W/H) 4800x780x980mm - weight approximately 5000kg ADVANTAGES – German production – auto-reverse – used shredder, very good condition Net price: 120900 PLN Net price: 28116 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Year of construction: 2026, condition: new, functionality: fully functional, Product Description Pneumatico Holder | Wallbox Cable Retractor 1.5–3.0 kg EVP153L30 The EVP holder from Pneumatico is an innovative device equipped with an automatic cable management function that revolutionizes electric vehicle charging. With this holder, tangled and dirty charging cables are a thing of the past. It is the simplest solution for all EV cables up to 22 kW. The holder can be mounted on the wall or ceiling and attached directly to the EV cable – that’s it! It is compatible with all wallbox brands and every cable type, suitable for both new and existing installations. Designed for outdoor use and harsh weather conditions. Fitted with a robust textile cord made from high-tenacity polyethylene fiber. The holder features two operating modes: continuous and ratchet-lock. This product is manufactured in the European Union. Technical Specifications for the EVP Wallbox Holder: Load capacity: 1.5 – 3.0 kg Nlsdsyn Etkspfx Airsh Housing material: Plastic Housing dimensions: 215 x 105 mm Automatic cable retraction Swiveling housing bracket Retractable cord length: 300 cm Holder weight: 2 kg Suitable for indoor and outdoor use For cables with a diameter of 9.5 to 18 mm Purpose of the Pneumatico Retractor EV The Pneumatico Retractor EV is designed to manage electric vehicle charging cables. Its plastic housing provides resistance to challenging weather conditions. The modern design ensures high product aesthetics. The retractor's cord is up to 300 cm long. Installation of the retractor is quick and easy. The suspended cable always remains clean, as do your hands.

Condition: excellent (used), PLC controller, electronic modules, PLC module, plug-in card circuit board, circuit board -Manufacturer: Mikron, Electronic module circuit board for operating unit TCD22, original packaging Nedpfsk Aua Nsx Airolh -Type: WW TCD 22 . 104.73.20.041 -Cardboard dimensions: 410/310/H65 mm -Weight: 0.6 kg

Year of construction: 2020, condition: excellent (used), WM1 300 CNC incl. Renishaw TP 200 Year of manufacture: 2020 Clamping tools from DK Fixiersysteme 3-axis CNC control High-resolution CCD matrix camera 1.5x magnification Incident lighting via LED ring light; 4 sectors and 1 ring individually switchable Precision measuring stage (X and Y axes) Diode laser for positioning assistance Joystick and trackball for axis movement with fast/slow toggle Camera-based measurement data acquisition Precise edge detection in transmitted and incident light using intelligent image processing algorithms Compact and handy – high performance Rapid operation with maximum measurement precision Special features Incl. Renishaw TP 200 touch probe system Switchable LED surface illumination Nlodpozpwd Nofx Airoh Diode laser for positioning assistance With a measuring range of 300 mm × 200 mm × 200 mm, it excels particularly with stamped parts, plastic and rubber components, milled parts, tools, profiles, and PCBs. Key highlights of the measuring microscope include camera-based measurement data acquisition, rapid operation, and high precision. Another notable feature is the precise edge detection in transmitted and incident light using smart image processing algorithms. Despite its high performance, the WM 1 300 CNC is compact and handy, measuring 900 mm × 950 mm × 950 mm. Please feel free to contact us if you have any further questions!

Condition: excellent (used), CATALOG NUMBER 7897 Technical data: - inlet width 400mm - inlet height 160mm - shaft width 530mm - shaft diameter 530mm - blade length 530mm - number of blades 2 pcs - screen dimensions 65x65mm - toothed pulling shaft, bottom - lower shaft motor 2.2kW - toothed pulling shaft, top - upper shaft motor 2.2kW - belt conveyor - length of conveyor belt 2200mm - width of conveyor belt 400mm - main motor 45kW - auto-reverse (adjustable) - overall dimensions (L/W/H) 4400x1600x1630mm - weight approximately 3000kg ADVANTAGES - German-made - auto-reverse (adjustable) - DTR documentation - used shredder, very good condition Net price: 75900 PLN Net price: 17650 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations) Nedpfx Ajzx Rnmjirolh

Condition: new, Year of construction: 2026, functionality: fully functional, Retractor EV Pneumatico with Automatic Cable Retractor / Charging Cable Holder The Pneumatico Retractor EV is an innovative holder with automatic cable retraction, revolutionizing the charging process for electric vehicles. This device not only makes charging the vehicle easier but also tidies up cable management effortlessly. The retraction unit is available in four models with different load capacities: EV0, EV1, EV2, EV3. What is the Pneumatico Retractor EV used for? The Retractor EV is designed for the management of electric vehicle charging cables. The housing is made of galvanized steel, making it weather-resistant. It features a 180-degree rotating mount that facilitates easy and convenient cable handling. The modern design and powder coating provide a high-quality, aesthetic finish. The extended cable is up to 300 cm long and manufactured from special, high-strength Dyneema fibers that do not damage vehicle bodywork. At the end of the cable, there is a rotating handle to prevent cable twisting. The retraction force can be adjusted using a wrench. Installation of the retraction unit is simple and quick. The suspended cable remains clean, as do the operator's hands. Lifting capacities range from 1.00 kg to 8.00 kg depending on the selected version. Does the Pneumatico EV Retractor fit every charging cable? Yes. The basic clamping range for cable diameters is from 16.5 to 32 mm, and the load capacity of the retractor ranges from 1.00 to 8.00 kg. If the cable diameter differs, we supply a custom cable holder with the required diameter and use a retractor with a higher load capacity. The Pneumatico Retractor EV is the ideal device for both private and commercial use. Pneumatico Cable Retractors – EV Series (EV0 / EV1 / EV2 / EV3) We offer Pneumatico spring-cable retractors in various load capacity ranges – ideal for industrial applications such as cable management and tool balancing. Load capacities / Models: EV0: 1–2.5 kg EV1: 2–4 kg EV2: 4–6 kg EV3: 6–8 kg Cable diameters (available for all EV models): 16.5–18.5 mm Nsdpsygv Dksfx Airjlh 19–20 mm 21–22 mm 22.5–24 mm 24.5–26 mm 26.5–28 mm 28.5–30 mm 30.5–32 mm

Condition: excellent (used), Year of construction: 2014, We are offering for sale these two Bosch UL-S 14000 steam boilers, which are in very good condition. They were manufactured in 2014. Manufacturer: Bosch Type: UL-S 14000 Nlodpfx Aiszg Nt Dsreh Year of manufacture: 2014 If you have any questions or require further information, please do not hesitate to contact us.