Used Presona Ab Baler for sale (11,779)

Condition: excellent (used), Year of construction: 2012, operating hours: 95,000 h, functionality: fully functional, machine/vehicle number: Vers. J18 (adattato F12), fuel type: gas, power: 2,651 kW (3,604.35 HP), output voltage: 6,300 V, output frequency: 50 Hz, nominal power: 2,714 kW (3,690.01 HP), Currently operational until June 2026. Longblock replacement performed during major overhaul (68,000 operating hours). Upon disassembly, a minor overhaul will be required. Regularly maintained and covered by the supplier’s preventive and corrective service contract. The system is complete with: - heat exchanger for steam production (Siat 1,168 kW); - SEA transformer, 6,300 --> 21,000 V. Dia.Ne version: XT 3. Pgodpfx Asrdx Ddjkfek

Condition: used, Year of construction: 2015, Wall line, manufactured to produce walls for modular manufacturing. Used by a Swedish producer between 2015 and 2021. NOTE: Sold in its current condition. Station lengths: 7000 mm Station width: 2700 mm Station nr1: Framing station CAD/CAM (includes two nail tools) Station nr2: Working table Station nr3: Semi automatic nailing bridge (includes two nail tools) Station nr4: Working table - Upraiser table Station nr5: Multifunction portal CAD/CAM (includes four screw tools and milling unit) Station nr6: Working station - Receiver table - Moveable sideways Station nr7: Working station - Angle transmission Station nr8: Working station - Upraiser table Station nr9: Working station - Angle transmission Podpfxexv Arxs Akfsgk Station nr10: Working station - Upraiser table

Condition: used, Year of construction: 2010, The solution has been developed for the production of prefabricated exterior wall panels intended for house manufacturers. The system consists of three main components: one rail-mounted nailing bridge and two worktables. Nailing Bridge: The nailing bridge is designed for automated panel nailing using four nail guns interconnected with the corresponding opposite side. The system includes four nailing units which automatically perform nailing operations according to predefined nailing patterns at the respective worktables. The nailing portal is mounted on a floor-installed rail system bolted to the concrete floor, allowing the bridge-type nailing system to move between the two worktables as required. The system is equipped with photocells for positioning and safety control. Function • The rail-mounted frame is positioned in a neutral loading position between the two worktables. • The nailing operation is initiated from either of the two worktables. • The selected nailing pattern is executed automatically. • The nailing portal is activated to carry out the nailing process in accordance with the chosen pattern. Worktables: The worktables are designed with support grooves for positioning timber studs. These grooves are adjustable via sliding mechanisms, enabling adaptation to different panel types and configurations. Function • The outer edges of the table are adjusted towards the panel using a manual control. • The selected battens are manually positioned to provide support for accurate panel placement. Pjdjykqxdspfx Akfogk • The operator positions the components to be assembled into the appropriate grooves and against the battens. • The bridge-mounted nailing system is activated to perform nailing according to the selected pattern.

Condition: good (used), Single Screw Screw diameter 25 mm Dimensions (LxWxH) 1860 x 900 x 1850 mm Options Pgedovri Ddopfx Akfek • Including haul-off • Including cooling bath

Condition: used, For lye pastries, flammkuchen, pizza – without steam injection. We have 2 more for sale in the same version. From our own operation – used until recently, ready for immediate use, pick-up only – test run possible. Pedpfx Akjyg N D Dofjgk

Condition: used, Bandsaw Manufacturer: Waco Jonsered AB Model: Bandresaw BK60 Year: 2015 Weight 8000 kg Feed speed: 10-60 m/min Max. cutting height: 300 mm Max. distance sawband to fence side: 235 mm Max. width of the feed unit: 400 mm Min. distance sawband to sawband: 10 mm Feed rollers, diameter: 165 mm Feed rollers, height: 300 mm Pjdpfxewv S Aco Akfsgk Saw wheel, diameter: 1080 mm Saw wheel, width: 100 mm Saw band, cutting speed: 42 m/sec Saw motors: 22 kW Feed unit (frequency converter): 5,5kW

Condition: new, Year of construction: 2027, The ZeroLabor Robotic System Product Family. Robotic: Assembly, Framing, Sheathing, Gluing and Insulation. The Randek ZEROLABOR Robotic System is a fully automated robot cell that performs various working processes fully automatic. The system is flexible and can be configured to customers need. The robotic cell can be integrated into existing production lines or work as a stand alone unit. The system can handle production of walls, floors and roofs. Automated processes: - Sheet handling, the sheet is picked using vacuum cup system from various stacks and placed on building components according to CAD-file. The system is flexible and can handle various sizes of sheets. Pgsdpfx Ajduub Uokfok - Fastening of sheets by screwing, stapling and/or nailing. - Cut out for openings such as electrical hoses, windows etc. - The system can handle 1, 2 or 3 layers of sheets. - Marking of component using inkjet. - Gluing - Waste handling, gypsum waste and OSB waste i.e. ist placed in different places if needed, i.e. directlc in waste bin/recycle bin. - Effective dust extraction system. - Straightening of building component using working table - Straightening of studs before nailing, ensuring placement of nails on stud.

Condition: ready for operation (used), Logsorting line with 14 + 1 pockets ( 2 x 7 ) Pedpfx Akor Hbcfefogk Rema system with measuring frame type 9001 Hydraulic log kickers

Condition: new, Year of construction: 2026, functionality: fully functional, The Randek cut-out saw JS400C is designed to make cut-outs at the end of pieces of wood, for example, for inserting a belt beam in vertically standing handles. The machine fixes the wood pneumatically and makes two cuts with the two 400mm diameter saw blades. The maximum length is 380mm and the depth of cut can be adjusted to a maximum of 115mm. The saw can be operated quickly and easily by means of a foot pedal. Functional description The wood to be notched, e.g. a handle, is pushed into the covered saw slot up to the set stop. and. The protruding end is placed on a roller block (not included). A foot pedal is used to pneumatically fix the inserted wood and trigger the sawing process. Technical description - Notching depth: 30 - 115 mm - Notching length: 10 - 380 mm - Wood thickness: 30 - 70 mm - Electrical connection: 3 x400 V, 50 Hz, 25 A - Compressed air: 0,5 - 0,8 MPa (5 - 8 bar) - Saw blades: HM 400/30-3,5/2,5/40 Safety The saw is well sealed against tampering by means of a cover plate. When the cover is opened, the electric current is automatically cut off, which minimizes the risk of injury. Advantages - Makes notching/cutting effective and precise Pjdpfxjd Arwhs Akfjgk - Flexible and easy to set up - Easy to operate - The set working height and the possibility to operate the machine by foot pedal makes the working conditions easy.

Condition: used, This listing is for an ÄKTA ready™ Chromatography System Pgjdpfx Aoyitvpjkfok The unit is in full working condition and is ready for immediate release The ÄKTA ready™ Chromatography System is a single‑use liquid chromatography platform engineered for bioprocessing, process scale‑up, and GMP‑regulated manufacturing of biologics, including monoclonal antibodies, recombinant proteins, viral vectors, nucleic acids, and other sensitive therapeutic products. Key Characteristics - Single‑use disposable flow paths — eliminate the need for cleaning and cleaning validation between runs, reduce downtime, and minimize cross‑contamination risk. - Flexible operation — available in multiple configurations (isocratic, gradient, variable UV, extended) to match different purification needs. - Scalable platform — flow kits for low and high flow rates support a wide range of process volumes; systems scale from small‑batch purification to larger process requirements when paired with larger ÄKTA ready™ XL models. - Designed for GMP environments — extensive documentation and regulatory support help meet compliance demands in regulated biopharmaceutical production

Condition: new, Year of construction: 2026, Butterfly Table BS20 Randek butterfly table BS20 is an efficient tool when producing prefabricated walls, roofs, floors, gable ends in timber or steel frame. The tables can be used separate or placed in a line. High quality is achieved due to the clamping function that guarantees the squaring of the building component. The turning of the building element is done with a controlled automatic process. High productivity is achieved; the working table is optimized for prefabricated house production. Functional description: The following processes can be done in the working table / butterfly table: • Automatic turning of building component, the up raiser table raises and flips over the building component during a controlled process to the receiver table, and the building component is turned. • Squaring of building component, the pneumatically clamping function on the long side of the table presses the building component into a squared high quality building component. • The table is developed in order to efficiently perform the following processes: building of framework, put on and nail sheets, nailing of plastic of paper foil and insulation of building component. Technical description: • Length: Available in lengths of 6000, 7500, 9000 and 12000 mm • Width adjustment between 2250 – 3100 mm, the adjustment between different widths is easily done with a manual control • The tables are hydraulically appraisable up to 91 degrees • Pneumatically squaring function on the up raiser table on the long side, stoppers height 160 mm • The tables are covered with plywood sheets as far as technically possible, the sheets makes it possible to put on sub components and beams easily directly on the table • The tables are built in strong steel profiles • The working height of the tables is optimal 620 mm • Equipped with alongside c-profiles for possible placement of steer stoppers for beam placement • The tables are completely delivered ready for assembly with very simple installation process. The customer is responsible for supply of motor cover and switcher for hydraulic unit (3kW) • The tables are designed to make it possible to add a multi function working bridge with nailing or drilling function • The distance between the tables shall be approximately 1100 mm, depending on the thickness of the building component Security: • The machine is equipped with safety stop CE-marked Benefits: • Squared building components due to clamping function Pgjdpfxs Nn Hyo Akfjk • Controlled and automatic turning of the building component • Ideal working height • Flexible adjustment in width

Condition: new, Randek intersection saw SPL728 Computer controlled, revolving, with LAN (Ethernet) connection for downloading or storing sawjobs (text file in ASCII format). The number of programs that could be stored is limited only by the size of the hard disk. Through the graphical touch screen (HMI), the operator is able to track all details directly on the screen or direct the saw directly to minimize disruptions in the production run. Sawblade: Heart metal, low noise, 700 mm Ø / 116 teeth, 360 ° horizontal swivel, 90 ° -28º inclined, 250 mm entry depth Engine performance 7.5 kW. Automatic closed-lock plastic protective screen. Supply bank, selectively 4.0 / 5.8 / 8.2 / 10.6 m long Driving role, IRO4-120, driven. Transport roll 76 mm Ø, roll length 400 mm, roll spacing C / C 500 mm. Return value 120 mm. Pressing device, pneumatic, 2 piece Select direction from left or right. Pedpfxofg Tate Akfjgk Delivery bank, optionally 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m long Computer controlled rolling stock type LX. Execution guide, rollers 76 mm Ø, length 400 mm. Hinged hooks 120 mm. 2 computer-controlled longitudinal locks, driven by gear belts. Hump ​​1 - designed for cutting lengths up to 50 mm. Note 2 - runs over the entire length of the carrier bank. The positioning of the longitudinal abutment and the setting of the cut angle requires independent computer control. Maximum speed of longitudinal contact 1 m / s. Wooden furniture: 1 piece Return devices: 2 pieces Direction: select from left or right

Condition: new, Year of construction: 2026, functionality: fully functional, BS10U 80° 1-table solution is used when producing open panels, curtain walls or other open component (floor, roof). Podox Tdtnjpfx Akfogk Available in lengths: 6000 mm, 7500 mm, 9000 mm, 12 000 mm. Can be equipped with a number of options: Hole beams, adding flexibility in production of building elements less than 2250 mm in height or when producing angled shaped walls etc. Hydraulic squaring instead of the standard solution Pneumatic squaring. Extended width adjustment in production of elements higher than 3100 mm (< 3650 mm). Rollers for transport elements in horizontal position enables production lines with BS20 system.

Condition: used, This listing is for an ÄKTA ready™ Chromatography System The unit is in full working condition and is ready for immediate release The ÄKTA ready™ Chromatography System is a single‑use liquid chromatography platform engineered for bioprocessing, process scale‑up, and GMP‑regulated manufacturing of biologics, including monoclonal antibodies, recombinant proteins, viral vectors, nucleic acids, and other sensitive therapeutic products. Pedpfeyhhgaex Akfsgk Key Characteristics - Single‑use disposable flow paths — eliminate the need for cleaning and cleaning validation between runs, reduce downtime, and minimize cross‑contamination risk. - Flexible operation — available in multiple configurations (isocratic, gradient, variable UV, extended) to match different purification needs. - Scalable platform — flow kits for low and high flow rates support a wide range of process volumes; systems scale from small‑batch purification to larger process requirements when paired with larger ÄKTA ready™ XL models. - Designed for GMP environments — extensive documentation and regulatory support help meet compliance demands in regulated biopharmaceutical production

Year of construction: 2007, condition: good (used), functionality: fully functional, Paint drying chamber MEYER AB / Fanmet OY 17m3 Year of construction 2007 )2009 installed ) Manufacturer MEYER OY Finland was used for drying lacquered furniture parts. Feeding with tray trolleys Pgjdpfx Akjtt Sy Refjk Length 3600mm width 2150mm height 2200mm approx. 17m3 electric heating total power 30 kw 18 heating units, each with 1667W, 400 V (length 2360mm) Air flow: 3m3 /sec or 10,000m3 /hour Inner cladding galvanized sheet steel 2 VEM fan motors ( 3,6kW+0,37kW ) ATEX Thermostat 0-120C Overheating protection 0-210C ATEX compliant 94/9/EC CE marked

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw Pgedpfxeuprqws Akfsk center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Weight with conveyor approx. 1250Kg Connection to 400A 32A Used, functional condition

Condition: like new (used), Year of construction: 2015, operating hours: 6 h, functionality: fully functional, machine/vehicle number: 17284006, total width: 1,000 mm, total length: 2,800 mm, total height: 1,580 mm, overall weight: 125 kg, input voltage: 230 V, air demand: 12 m³/h, air pressure: 7 bar, power: 0.5 kW (0.68 HP), input frequency: 50 Hz, Equipment: documentation/manual, A semi-automatic tube filling machine MF10A manufactured by Medipac AB. The filling capacity is approximately 24 tubes/minute. When the magazine for filled tubes is full (approx. 10 tubes), the machine switches to standby mode, and when the filled tubes are removed from the magazine, the machine automatically resumes operation. This allows for easy operation by a single operator. The machine is equipped for ø25mm tablets and tubes with ø29mm outer diameter; other formats available upon request. Documentation (in English) is available. Podpfx Ajxqf Rmjkfegk

Condition: used, For sale: GEODESIGN AB AQUA BARRIER FLOOD BARRIER Podpswhlhvefx Akfsgk Aluminum pallet barrier, approximately 400 m long, Sold in quantities of 100 m or more Packaged in several crates; Without film, beams, or pallets.

Condition: excellent (used), Year of construction: 2011, 1 x Oil Mist Extractor Absolent AB A mist 10C with HEPA filter Year of manufacture: 2011 In very good condition. Pgjdpfetp Thbsx Akfsk The extraction unit can be inspected at our warehouse.

Condition: excellent (used), Year of construction: 2007, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: LP80VHK1, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 2,500 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), Equipment: documentation/manual, Technical data press: Manufacturer Presona AB Type: LP80VHK1 Year of manufacture: 2007 Pressure force main press 78.5 t Specific pressure force 95 N/cm² Pressure force pre-press 28 t Press chamber volume 2.7 m³ Dimensions of feed chute 1,500 x 1,100 mm Theoretical throughput 930 m³/hour Throughput under operating conditions 410 m³/hour Bale dimensions 750 x 1,100 mm Drive power 55 kW Binding 5-fold vertical, fully automatic Throughput capacity at a bulk density of density 30 kg/m³ approx. 9 to 12 tonnes/hour, density 50 kg/m³ approx. 14 to 17 tonnes/hour, Pgsdjxw H Iyspfx Akfek density -100 kg/m³ approx. 16 to 25 tonnes/hour,g Throughput capacity for MSW (municipal solid waste) approx. 20 to 27 t/hour, depending on material Bale weights 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume 1,000 L Press dimensions with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions excluding press 10,985 x 2,300 x 2,900 mm Machine weight of press approx. 24 t Loading device Guide device for bales from the chute to the floor Fully automatic strapping device with 5 rows of strapping wire Wire guides for feeding 10 spools weighing 500 kg. Hydraulic system with cartridge assembly Control system for 2 conveyor belts Press control system with PLC control Photocells for two-stage filling of the press chamber Time counter Bale counter Bale length measuring counter Technical documentation

Condition: ready for operation (used), Year of construction: 2014, operating hours: 800 h, functionality: fully functional, machine/vehicle number: 310712, overall weight: 9,000 kg, load capacity: 8,000 kg, input voltage: 400 V, type of input current: three-phase, warranty duration: 3 months, Equipment: documentation/manual, stove, Large incandescent stove sold with trolley. Pgjdpfxeulu Nue Akfek Manufactured by Electro Heat Sweden AB.

Condition: used, Year of construction: 1993, 1 used column drilling machine Brand: Alzmetall Model: AB 36 Podpoy H Dfwjfx Akfogk Year of manufacture: 1993 Spindle taper: MK 4 Drilling capacity in steel St 60: 34 mm Drilling capacity in cast iron GG 20: 40 mm Max drilling capacity in St 60: 40 mm Thread cutting in ST 60: M 24 Thread cutting in GG 20: M 30 Reach: 330 mm Column diameter: 145 mm Spindle stroke: 160 mm with automatic drilling feed Total power requirement: 1.3 kW Machine height: 1865 mm Weight approx. 470 kg

Condition: new, Year of construction: 2025, MACHINERY WILL BE BRAND NEW The machinery is available to bale aluminum cans as well as steel cans up to 0.2 mm of the thickness and 3 liters of the volume. All electric-electronic materials will be from Schneider and Siemens Brand. The machine will be fully automatic with PLC control and a touch screen Siemens HMI Simatic Panel with emergency buttons. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. There will be an Oil cooling/heating system depending on the operation zone. MB 500 Magnetic Separator and VH (120-250) Vibration Hopper are optional for separating the scrap aluminum and steel cans and for getting rid of the dirt and dust in the scrap. Technical Specifications: Bale Size: 500mm x 330mm x ... Container Dimension (Width x Length x Height): 500mm x 1.000mm x 330mm Capacity Up to 1.000 kg/hour (Aluminum) Up to 2.000 kg/hour (Steel) Bale weighs with a mechanic scale system: 10-20 kg Cycle Time: 30 seconds Top Cover Cylinder Force: 25 tons Main Compression Cylinder Force: 100 tons General Working Pressure: 225 bars Pjdpfxjrc Dkqo Akfjgk Machine Dimensions (Width x Length x Height): 1.100mm x 4.200mm x 2.600mm Electric Motor: 18,5 kW Machine Weight: 5.000 kg

Condition: new, Year of construction: 2025, IMPORTANT: MACHINE WILL BE BRAND NEW * The cutting guillotine is made of cast steel and is more resistant to fracture, buckling, and abrasion. * Cast steel cutting ram is subjected to a stress-relieving process. * The bolts of the blades on the cutting ram are monitored by the automation system and they are constantly kept tight by the hydraulic tightening system. Fracture and wear of the blades are minimized with this system, and 5 tons of force is applied to each bolt of the blades. * A hydraulic clamping system is used on both the moving and fixed parts of the blades. * Friction surfaces are coated with HARDOX 450 & 500 to prevent wear. * The machine has a fully automatic PLC control and a professional remote controller. * All electric-electronic components used are Schneider and Siemens Brands. * Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. SEE THE TECHNICAL DESCRIPTION BELOW: Cutting Force: 700 Tons Side Compression Force: 2x120=240 Tons (each wing) Clamp Compression Force: 120 Tons Pusher Ram Force: 120 Tons Electric Motor: 180 kW Pgsdpfx Aodd Tp Rskfek Machine Weight: 70.000 kg Cutting Width: 800 mm Box & Bale Size: 800 mm x 600 mm Box Length: 6.000 mm Box Width Opening: 350 mm Capacity: < 10 - 15 ton/h (Cutting Capacity), 15 - 20 ton/h (Baling Capacity)

Condition: new, Year of construction: 2024, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW * Piston shafts will be induction-hardened and chrome-plated. * The pressing box will be HARDOX plates. * Pumps and valves used in the hydraulic system will be MARZOCCI brand. * The hydraulic valve control lever unit will be SALAMI or VALVOIL brand. * There will be automatic Oil Cooling/Heating Systems. * There will be an oil temperature control screen on the electric panel and an oil level control on the hydraulic oil tank. * The machine will be manually operated. * All electric-electronic material will be from the SCHNEIDER or SIEMENS brand. * Machine will be under AYMAS Makina San. ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or 2.500 working hours whichever comes first. * The machine is CE and EAC certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. SEE THE TECHNICAL DESCRIPTION BELOW Bale Size: 600mm x 400mm x ... Container Dimension (Width x Length x Height ): 620mm x 1.300mm x 620mm Psdpfx Aedfc Unskfogk Capacity: